Webutil HOST and NO_SCREEN option

How can I hide the DOS window that open on the client side when I use webutil's HOST command?
I would like to be able to do the same thing as when using the NO_SCREEN option with forms' HOST command.
It is not very nice for the user to see little black windows opening and closing....
MJH

I know this thread is old, but I figured I would contribute this in case anyone is still looking for an answer:
http://www.commandline.co.uk/cmdow/
It is third-party code, but it appears to do just what it claims to.

Similar Messages

Webutil.host and space in filename ....

Hello,
Do someone have found a solution at the problem of space in filename calling whith webutil.host ?
under winxp if I do :
CMD /C start "C:\Program Files\Microsoft Office\OFFICE11\WINWORD.EXE" "C:\travail\COMMENTAIRES DU DOSSIER 5200257".doc
it works well
But do the same in Webutil.host command ... and it fail :<
I see that this was an old problem in post but dunot have found any response ..
tk anyway.

So, i have try all these options and found that webutil seems to cut spaces.
As I have this
LC$Cmd := 'cmd /c start "C:\Program files\Microsoft Office\OFFICE11\WINWORD.EXE" "c:\travail\COMMENTAIRES DU DOSSIER 5200257.doc"'
WEBUTIL_HOST.Nonblocking( LC$Cmd ) ;
webutil launch :
"C:\Program files\Microsoft Office\OFFICE11\WINWORD.EXE" "c:\travail\COMMENTAIRES DU DOSSIER 5200257.doc"'
and so it dunot found the document
bcs it make all space -> 1 space
strange !!
perlaps some have got same problem ?

WebEx Named Host and Port Options

Hello,
Whats he diffrence between WEBEX NAMED HOST and WEBEX PORT OPTION. And do they requrie any hardware to function with?
a documetation with explanations will help more.
Regards,
Peter.

Named Host is where you specify which users can host a meeting. Those people are the only ones who can schedule/create meetings but they can transfer the host role to another person after the meeting has started. Ports on the other hand only limit the total meeting participants across all hosts (the host also consumes a port). You can create as many hosts as you need but total attendance at any one time cannot exceed your ports. There are also per-minute options and active host options where only an unnamed percentage of the organization is assumed to be a host and you true-up if real usage exceeds that percentage.
It's probably best to speak with a Cisco or WebEx AM over the options. Different usage styles lend themselves to different licensing options. Here's a data sheet though:
http://www.cisco.com/en/US/prod/collateral/ps10352/ps10362/ps10409/cisco_webex_meeting_center_on_the_gpl_and_wpl.pdf
Please remember to rate helpful responses and identify helpful or correct answers.

Webutil equivalent of host(cmd,no_screen) and host(cmd,screen) builtins

Hi,
What's the webutil command equivalent to host(cmd,no_screen) & host(cmd,screen)? Host builtin can be used only in windows platform, but to make it common across all platforms, webutil_host is needed. So, if no_screen parameter is used, what can be used in webutil to make it work as the host command with no_screen option.
Thanks in advance,
Natraj.

I know this thread is old, but I figured I would contribute this in case anyone is still looking for an answer:
http://www.commandline.co.uk/cmdow/
It is third-party code, but it appears to do just what it claims to.

The essential guide to DW cs4... by D. Powers: when from wamp to xampp+virtual host and having problems :(

Following the book in chapter 2 I think Ivé followed everything correctly, but have encluded all the things I've edited below.
I was using wamp with no problems but after trying to set up a virtual host and now using xampp im abit lost its probabsomething stupid but I can find the prob.
(This post is abit long and dragged out so I used some colour to try ease the reading..)
When I try to view a dynamic page in live view or in firefox I get the following error:
**when using:
<VirtualHost *:80>
DocumentRoot c:/xampp/htdocs
ServerName localhost
</VirtualHost>
result:
Access forbidden!
You don't have permission to access the requested object.     It is either read-protected or not readable by the server.
If you think this is a server error, please contact the webmaster.
Error 403
thegoodlife
2009/10/13 12:47:48 PM
Apache/2.2.12 (Win32) DAV/2 mod_ssl/2.2.12 OpenSSL/0.9.8k mod_autoindex_color PHP/5.3.0 mod_perl/2.0.4 Perl/v5.10.0
*when using:
<VirtualHost *:80>
DocumentRoot c:/htdocs
ServerName localhost
</VirtualHost>
result:
Object not found!
The requested URL was not found on this server.          If you entered the URL manually please check your     spelling and try again.
If you think this is a server error, please contact the webmaster.
Error 404
thegoodlife
2009/10/13 12:32:58 PM
Apache/2.2.12 (Win32) DAV/2 mod_ssl/2.2.12 OpenSSL/0.9.8k mod_autoindex_color PHP/5.3.0 mod_perl/2.0.4 Perl/v5.10.0
This is what I've done, blue indicating where I have or was meant to edit, red being the relivant context. (hope it helps )
1. Created a new folder called htdocs (C:\htdocs)
2. Changed the pathname to:
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
DocumentRoot "C:/htdocs"
and
# This should be changed to whatever you set DocumentRoot to.
<Directory "C:/htdocs">
3. Created vhosts folder; with a sub-folder called thegoodlife (C:\vhosts)
4. entered new vhost:
# Additionally, comments (such as these) may be inserted on individual
# lines or following the machine name denoted by a '#' symbol.
# For example:
#      102.54.94.97     rhino.acme.com          # source server
#       38.25.63.10     x.acme.com              # x client host
127.0.0.1 localhost
127.0.0.1 dwcs4
127.0.0.1 thegoodlife
127.0.0.1 bin.errorprotector.com ## added by CiD
5.It says uncomment the command by removing the #, (Supplemental configuation.), but this is the origional file; already uncommented?
# Real-time info on requests and configuration
Include "conf/extra/httpd-info.conf"
# Virtual hosts
Include "conf/extra/httpd-vhosts.conf"
# Distributed authoring and versioning (WebDAV)
Include "conf/extra/httpd-dav.conf"
6.Set the permissions and changed the code as instructed, unsing (c:/xampp/htdocs) as advised.
# You may use the command line option '-S' to verify your virtual host
# configuration.
<Directory C:/vhosts>
Order Deny,Allow
Allow from all
</Directory>
# Use name-based virtual hosting.
##NameVirtualHost *:80
# VirtualHost example:
# Almost any Apache directive may go into a VirtualHost container.
# The first VirtualHost section is used for all requests that do not
# match a ServerName or ServerAlias in any <VirtualHost> block.
<VirtualHost *:80>
DocumentRoot c:/xampp/htdocs
ServerName localhost
</VirtualHost>
<VirtualHost *:80>
DocumentRoot c:/vhosts/dwcs4
ServerName dwcs4
</VirtualHost>
<VirtualHost *:80>
DocumentRoot c:/vhosts/thegoodlife
ServerName thegoodlife
</VirtualHost>
Then creating the site definition:
local root forlder: C:\htdocs\thegoodlife\
testing server folder: C:\vhosts\thegoodlife\
URL prefix: http://thegoodlife/
hope i've covered all area's where I could have gone wrong

Just one more thing - the description of what i did while first Kernel appeared:
Happened 2 days ago. Wasn't turning it off for like a day, only sleep mode by closing it. Worked fine all day, wasn't doing anything, except for checking mail 2-3 times and having windows 7 virtual machine opened but doing nothing, everything was going fine. Then closed it without turning off.
Opened 3-4 hours later, everything was working fine for 30 minutes of checking mail, then Kernel appeared. After that pretty much everything i did is described in part 1-5.
Note: all the time MBP was connected to internet via wifi, so updates to both MBP and virtual machine of all programs were possible.
I only shared downloads and desktop folders, so windows couldn't have access to system folder of Mac Os.
Hope this might help...Thanks again.

WebUtil: oracle.forms.webutil.host.Host bean not found

Hi. This is my first attempt using WebUtil. The following code is in my When-New-Form-Instance trigger:
client_host('N:\TTMS\ITS\vbasic\compiled\MenuUpdate.exe');
This is the error I receive:
oracle.forms.webutil.host.Host bean not found
I've included my formsweb.cfg below for your reference. Note that the application is using the [ttmsmenu] configuration.
Thanks in advance for your help with this problem.
***FORMSWEB.CFG***
# $Id: formsweb.cfg 15-apr-2005.13:17:30 pkuhn Exp $
# formsweb.cfg defines parameter values used by the FormsServlet (frmservlet)
# This section defines the Default settings. Any of them may be overridden in the
# following Named Configuration sections. If they are not overridden, then the
# values here will be used.
# The default settings comprise two types of parameters: System parameters,
# which cannot be overridden in the URL, and User Parameters, which can.
# Parameters which are not marked as System parameters are User parameters.
# SYSTEM PARAMETERS
# These have fixed names and give information required by the Forms
# Servlet in order to function. They cannot be specified in the URL query
# string. But they can be overridden in a named configuration (see below).
# Some parameters specify file names: if the full path is not given,
# they are assumed to be in the same directory as this file. If a path
# is given, then it should be a physical path, not a URL.
# USER PARAMETERS
# These match variables (e.g. %form%) in the baseHTML file. Their values
# may be overridden by specifying them in the URL query string
# (e.g. "http://myhost.mydomain.com/forms/frmservlet?form=myform&width=700")
# or by overriding them in a specific, named configuration (see below)
[default]
#WebUtilArchive=frmwebutil.jar,jacob.jar
#WebUtilLogging=off
#WebUtilLoggingDetail=normal
#WebUtilErrorMode=Alert
#WebUtilDispatchMonitorInterval=5
#WebUtilTrustInternal=true
#WebUtilMaxTransferSize=16384
# System parameter: default base HTML file
baseHTML=base.htm
# baseHTML=webutilbase.htm
# System parameter: base HTML file for use with JInitiator client
baseHTMLjinitiator=basejini.htm
# baseHTMLjinitiator=webutiljini.htm
# System parameter: base HTML file for use with Sun's Java Plug-In
baseHTMLjpi=basejpi.htm
# baseHTMLjpi=webutiljpi.htm
# System parameter: delimiter for parameters in the base HTML files
HTMLdelimiter=%
# System parameter: working directory for Forms runtime processes
# WorkingDirectory defaults to <oracle_home>/forms if unset.
workingDirectory=
# System parameter: file setting environment variables for the Forms runtime processes
envFile=default.env
# Forms runtime argument: whether to escape certain special characters
# in values extracted from the URL for other runtime arguments
escapeparams=true
# Forms runtime argument: which form module to run
form=test.fmx
# Forms runtime argument: database connection details
userid=
# Forms runtime argument: whether to run in debug mode
debug=no
# Forms runtime argument: host for debugging
host=
# Forms runtime argument: port for debugging
port=
# Other Forms runtime arguments: grouped together as one parameter.
# These settings support running and debugging a form from the Builder:
otherparams=buffer_records=%buffer% debug_messages=%debug_messages% array=%array% obr=%obr% query_only=%query_only% quiet=%quiet% render=%render% record=%record% tracegroup=%tracegroup% log=%log% term=%term%
# Sub argument for otherparams
buffer=no
# Sub argument for otherparams
debug_messages=no
# Sub argument for otherparams
array=no
# Sub argument for otherparams
obr=no
# Sub argument for otherparams
query_only=no
# Sub argument for otherparams
quiet=yes
# Sub argument for otherparams
render=no
# Sub argument for otherparams
record=
# Sub argument for otherparams
tracegroup=
# Sub argument for otherparams
log=
# Sub argument for otherparams
term=
# HTML page title
pageTitle=Oracle Application Server Forms Services
# HTML attributes for the BODY tag
HTMLbodyAttrs=
# HTML to add before the form
# HTMLbeforeForm=
HTMLbeforeForm=<SCRIPT LANGUAGE="JavaScript">window.opener = top;</SCRIPT>
# HTML to add after the form
HTMLafterForm=
# Forms applet parameter: URL path to Forms ListenerServlet
serverURL=/forms/lservlet
# Forms applet parameter
codebase=/forms/java
# Forms applet parameter
#imageBase=DocumentBase
imageBase=codeBase
# Forms applet parameter default 750
# width=1000
# width=100%
width=500
# Forms applet parameter default 600
# height=700
# height=100%
height=500
# Forms applet parameter default false
separateFrame=true
# Forms applet parameter
# splashScreen=
splashScreen=no
#splashScreen=ttmslogo_new.gif
# Forms applet parameter
background=ttmslogo_new.gif
# Forms applet parameter
lookAndFeel=Oracle
# Forms applet parameter
colorScheme=teal
# Forms applet parameter
logo=ttms_banner.gif
# Forms applet parameter
restrictedURLparams=HTMLbodyAttrs,HTMLbeforeForm,pageTitle,HTMLafterForm,log,allow_debug,allowNewConnections
# Forms applet parameter
formsMessageListener=
# Forms applet parameter
recordFileName=
# Forms applet parameter
serverApp=default
# Forms applet archive setting for JInitiator
archive_jini=frmall_jinit.jar
# Forms applet archive setting for other clients (Sun Java Plugin, Appletviewer, etc)
archive=frmall.jar
# Number of times client should retry if a network failure occurs. You should
# only change this after reading the documentation.
networkRetries=0
# Page displayed to Netscape users to allow them to download Oracle JInitiator.
# Oracle JInitiator is used with Windows clients.
# If you create your own page, you should set this parameter to point to it.
jinit_download_page=/forms/jinitiator/us/jinit_download.htm
# Parameter related to the version of JInitiator
jinit_classid=clsid:CAFECAFE-0013-0001-0022-ABCDEFABCDEF
# Parameter related to the version of JInitiator
jinit_exename=jinit.exe#Version=1,3,1,22
# Parameter related to the version of JInitiator
jinit_mimetype=application/x-jinit-applet;version=1.3.1.22
# Page displayed to users to allow them to download Sun's Java Plugin.
# Sun's Java Plugin is typically used for non-Windows clients.
# (NOTE: you should check this page and possibly change the settings)
jpi_download_page=http://java.sun.com/products/archive/j2se/1.4.2_06/index.html
# Parameter related to the version of the Java Plugin
jpi_classid=clsid:CAFEEFAC-0014-0002-0006-ABCDEFFEDCBA
# Parameter related to the version of the Java Plugin
jpi_codebase=http://java.sun.com/products/plugin/autodl/jinstall-1_4_2-windows-i586.cab#Version=1,4,2,06
# Parameter related to the version of the Java Plugin
jpi_mimetype=application/x-java-applet;jpi-version=1.4.2_06
# EM config parameter
# Set this to "1" to enable Enterprise Manager to track Forms processes
em_mode=0
# Single Sign-On OID configuration parameter
oid_formsid=%OID_FORMSID%
# Single Sign-On OID configuration parameter
oracle_home=C:\DevSuiteHome_1
# Single Sign-On OID configuration parameter
formsid_group_dn=%GROUP_DN%
# Single Sign-On OID configuration parameter: indicates whether we allow
# dynamic resource creation if the resource is not yet created in the OID.
ssoDynamicResourceCreate=true
# Single Sign-On parameter: URL to redirect to if ssoDynamicResourceCreate=false
ssoErrorUrl=
# Single Sign-On parameter: Cancel URL for the dynamic resource creation DAS page.
ssoCancelUrl=
# Single Sign-On parameter: indicates whether the url is protected in which
# case mod_osso will be given control for authentication or continue in
# the FormsServlet if not. It is false by default. Set it to true in an
# application-specific section to enable Single Sign-On for that application.
ssoMode=false
# The parameter allow_debug determines whether debugging is permitted.
# Administrators should set allow_debug to "true" if servlet
# debugging is required, or to provide access to the Forms Trace Xlate utility.
# Otherwise these activities will not be allowed (for security reasons).
allow_debug=false
# Parameter which determines whether new Forms sessions are allowed.
# This is also read by the Forms EM Overview page to show the
# current Forms status.
allowNewConnections=true
# EndUserMonitoring
# EndUserMonitoringEnabled parameter
# Indicates whether EUM/Chronos integration is enabled
EndUserMonitoringEnabled=
# EndUserMonitoringURL
# indicates where to record EUM/Chronos data
EndUserMonitoringURL=
# Example Named Configuration Section
# Example 1: configuration to run forms in a separate browser window with
# "generic" look and feel (include "config=sepwin" in the URL)
# You may define your own specific, named configurations (sets of parameters)
# by adding special sections as illustrated in the following examples.
# Note that you need only specify the parameters you want to change. The
# default values (defined above) will be used for all other parameters.
# Use of a specific configuration can be requested by including the text
# "config=<your_config_name>" in the query string of the URL used to run
# a form. For example, to use the sepwin configuration, your could issue
# a URL like "http://myhost.mydomain.com/forms/frmservlet?config=sepwin".
[sepwin]
separateFrame=True
lookandfeel=Generic
# Example Named Configuration Section
# Example 2: configuration forcing use of the Java Plugin in all cases (even if
# the client browser is on Windows)
[jpi]
baseHTMLJInitiator=basejpi.htm
# Example Named Configuration Section
# Example 3: configuration running the Forms ListenerServlet in debug mode
# (debug messages will be written to the servlet engine's log file).
[debug]
serverURL=/forms/lservlet/debug
# Sample configuration for deploying WebUtil. Note that WebUtil is shipped with
# DS but not AS and is also available for download from OTN.
[webutil]
WebUtilArchive=frmwebutil.jar,jacob.jar
WebUtilLogging=off
WebUtilLoggingDetail=normal
WebUtilErrorMode=Alert
WebUtilDispatchMonitorInterval=5
WebUtilTrustInternal=true
WebUtilMaxTransferSize=16384
baseHTMLjinitiator=webutiljini.htm
baseHTMLjpi=webutiljpi.htm
archive_jini=frmall_jinit.jar
archive=frmall.jar
lookAndFeel=oracle
[ttmsmenu]
WebUtilArchive=frmwebutil.jar,jacob.jar
WebUtilLogging=off
WebUtilLoggingDetail=normal
WebUtilErrorMode=Alert
WebUtilDispatchMonitorInterval=5
WebUtilTrustInternal=true
WebUtilMaxTransferSize=16384
baseHTMLjinitiator=webutiljini.htm
baseHTMLjpi=webutiljpi.htm
baseHTML=webutilbase.htm
archive_jini=frmall_jinit.jar
archive=frmall.jar
lookAndFeel=oracle
width=500
height=500
background=no
form=ttmsmenu.fmx

Dumb dumb dumb.
I was running this form out of Form Builder 10g. At some point I changed the Application Server URL (Edit => Preferences => Runtime menus) from:
http://ssbuechl2.div16.ibm.com:8889/forms/frmservlet?config=ttmsmenu
to:
http://ssbuechl2.div16.ibm.com:8889/forms/frmservlet?
So my customized configuration with all the WebUtil references was not being referenced and I was getting the error.
Dumb dumb dumb.

Webutil.host.HostBean not found WEBUTIL_HOST.execute will not work

Hi everyone:
I've got a form. I've attached webtill.pll and subclassed webutil.olb.
In the WHEN-NEW-FORM-INSTANCE trigger it does:
client_host('cmd /c cd > arch.txt');
When I execute my form I got the errror:
webutil.host.HostBean not found
WEBUTIL_HOST.execute will not work
Could anyone give me some help on it?
Thanks!
Carolina

Hi!
this is what I got in the Java console
JInitiator: Versión 1.3.1.22
Usar versión JRE 1.3.1.22-internal Java HotSpot(TM) Client VM
Directorio local del usuario = C:\Documents and Settings\Administrador
Configuración del delegado: sin delegado
JAR cache enabled
Location: C:\Documents and Settings\Administrador\Oracle Jar Cache
Maximum size: 50 MB
Compression level: 0
c: clear console window
f: finalize objects on finalization queue
g: garbage collect
h: display this help message
l: dump classloader list
m: print memory usage
q: hide console
s: dump system properties
t: dump thread list
x: clear classloader cache
0-5: set trace level to <n>
Loading http://rx26201:7778/forms/java/frmall_jinit.jar from JAR cache
Loading http://rx26201:7778/forms/java/frmwebutil.jar from JAR cache
Loading http://rx26201:7778/forms/java/jacob.jar from JAR cache
Loading http://rx26201:7778/forms/java/dgrImages.jar from JAR cache
proxyHost=null
proxyPort=0
connectMode=HTTP, native.
La versión del applet Forms es: 10.1.2.0
thanks!

Webutil Host bean error

I'm trying to use the webutil.nonblocking procedure, i followed all the steps in the user guide to install the webutil and i attached the library to the form and subclassed the object group, but when running the form i receive this error
oracle.forms.webutil.host.Host bean not found.Webutil_host.execute will not work
can anybody help
regards
lilian

Problem solved ..
check for the following
1- make sure the virtual path in the orion-xml file is correctly set.
2-make sure that the signature of the jacob,jar and frmwebutil.jar is successfully done.
3- check the WebArchive entry is correctly set
hope this will help ..
Regards
Lilian

What is required in the HOST and QUEUE field when ...

Hi
When setting up my printer, i fill the options identical to what follows:
PRINTER: SAMSUNG HOME
DRIVER:    GENERAL
BEARER: LPR <-----------------------------( NOT SURE IF IT IS THE CORRECT OPTION TO SELECT )
The following fields appear once LPR is selected:
ACCES POINT : HOME
HOST:              WHAT COMES HERE?
USER:              SKY00BER
QUEUE:            WHAT COMES HERE?
ORIENTATION: PORTRAIT
PAPER SIZE: A4
if it helps, my printer is SAMSUNG CLX-3175FW. It is Wifi Enable and is connected to my HOME acces point.
please do correct me if there has to be changes to the BEARER or anything else.
i could really use some help.
thanks in advanced.

sky00ber wrote:
Hi,
What is required in the HOST and QUEUE field when setting a WIFI printer?
When setting up my printer, i fill the options identical to what follows:
PRINTER: SAMSUNG HOME
DRIVER:    GENERAL
BEARER: LPR <-----------------------------( NOT SURE IF IT IS THE CORRECT OPTION TO SELECT )
The following fields appear once LPR is selected:
ACCES POINT : HOME
HOST:              WHAT COMES HERE?
USER:              SKY00BER
QUEUE:            WHAT COMES HERE?
ORIENTATION: PORTRAIT
PAPER SIZE: A4
if it helps, my printer is SAMSUNG CLX-3175FW. It is Wifi Enable and is connected to my HOME acces point.
please do correct me if there has to be changes to the BEARER or anything else.
HELP URGENTLY NEEDED!
I'm not sure but I give it a try.Turn your security(WPA/WEP) and Firewall temporarely off. HOST is the IP address of the printer. QUEUE can be YES or a specific amount of prints, like 1,2,3......
If I look at the manual of your printer I see that you can find the IP and MAC addresses in the Network Configuration Report.I don't know what the USER is doing there because if there is a user then there must be a password.
‡Thank you for hitting the Blue/Green Star button‡
N8-00 RM 596 V:111.030.0609; E71-1(05) RM 346 V: 500.21.009

Host and Port

Hi
WHere can I get the Host and Port no of the PI Server
Thanks
PR

Hi,
In addition to above, Just FYI that in PI 7.1 the Http and J2ee port are same..
The discussion about same can be found [here|Re: Architecture of PI 7.1] and [here|Re: ABAP & Java ports in PI 7.1?]
and to check all the info @ single place:
Login to XI ABAP stack -> Run tcode SXMB_IFR -> Choose Option Administration -> Properties Administration ->All properties
Sachin
Edited by: Sachin Dhingra on Apr 2, 2009 10:01 AM

Help with the HOST and START, forms 6i

Hi i like open to image with de Host and Start in Forms 6i.
For example Host('start '||:path||'', NO_SCREEN ); -> is correct if the path is c:\ ... but if the path is more longer with space in white for example C:\Documents and settings ... i put the quotes "C:\Documents and settings ..." but Doesn't open the image, another window (MSDOS) open... :S

Hello,
Try this:
Host('cmd /c START "" "' || :path || '" ');Francois

Oracle9i Host and Text_IO Command Issues

We are currently attempting to migrate from Forms6i to Oracle9i Forms. I understand that the current Host and Text_IO commands execute on the application server tier and NOT on the client. To counter the Host command issue the migration documentation suggests using the 'Client Host Command PJC' demo which can be incorporated into a form. However, the only Host command that seems to respond is the 'Notepad' command. I need to use other Host commands. Has anyone actually used the aforementioned 'Client Host PJC' in an Oracle9i form?
Also, I am aware of a utility being developed by Oracle called 'WebUtil' which is suppose to simplify this process. Any idea when this utility will be launched and made available to developers? Thanks in advance for your help.

Hello:
Robin Zimmermann, [email protected] g feng and every one:
I want to integrate a third party report (it is brio's sqr), so i must run sqr from form with host command.
first i install 9i as on window 2000,sqr .manually run sqr on 2000,then call sqr from form
with host command ,it is just work well.then i use web.showdocument push the report to end-user,my goal has get
But when i do the same on aix 5l,host command seems not response .i can only run this command:
echo hello > /tmp/hello.log.
other system command ,such as " chmod 777 /tmp/hello.log " can't execute ,who can help me or some other ideas?
lixz

Data Socket Publish and Subscribe option

I'm writing a server/ client application in wish the client needs to be updated by the server with information when its first started and then also be able to write back to the same controls thru data socket. The applications are on two different computers connected with ethernet. I try to use the "publish and subscribe" option on the datasocket set up but the client can not connect to write to the server when i do this. It says that a host is already connected to write so therefore the client can not write to the server.
I've also tried creating a control and an indicator with separate publish and subscribe data socket features but this does not permit for automatic updating in my server. It must wait for the server's application to finish thru a loop that has a timer that varies around 30 seconds.
Is there any other way to have a client update a server in real time with both read and write functions?
Thanks in advance!

One thing you can try to do is to enable the "Allow Multiple Writers" option on the DataSocket Server.
In the DataSocket Server Manager, under Predefined Data Item, create the item that your server/client need to write on, and enable the "Allow Multiple Writers". This will allow both server and client to write to the same address line.
Hope this helps,
Dan

Settings of Mail Host and Mail Port in transaction: SCOT for the node: SMTP

Hi,
Could anyone please explain me the significance of Mail Host and Mail Port for the SMTP node in transaction: SCOT.
It says Mail Server to which outbound mails can be passed.
Can i specify my GMAIL ID in the field Mail Host and left blank the Mail Port so that the mail can be sent to my GMAIL Account.
Please let me know if further details are required from my side.
Thanks & Regards,
Goutham.

the below are the step to configure your mail server of anhy type ....
Steps to perform in SAP:
1. Transaction SM59 Setup an RFC Destination for the execution of the email transfer
a. Name: Internet Mail Gateway
b. Connection Type: T
c. Description: Internet Mail Gateway
d. Activation Type: Start
e. Explicit host:
i. Program: c:<dir>mlunxsnd (I used c:sapmail)
ii. Target Host: <Server_Name>
f. (MENU) Destination -> Gateway Options
i. Gateway Host: < Server_Name>
ii. Gateway Service: sapgw00
iii.<OK>
g. SAVE
2. Transaction SCOT Setup a default domain for your system
a. (MENU) Settings -> Default Domain
i. <Default_domain> (i.e. [email protected], Domain company.com)
ii. This setting gives a default to any user who does not have their email address maintained in the system. <user_name>@<default_domain>
3. Transaction SCOT Setup of the Node for queuing the emails before transfer to Exchange
a. Click on INT -> Create button
b. Give Default name (I choose EXCHG, as this was the node type for the Exchange Connector)
c. Give Description
d. Assign the RFC Destination previously created (Internet Mail Gateway)
e. Node: Internet
f. Address area: *
g. Supported address Types:
i. All formats except the fllw
ii. ALI, OBJ, OTF, SCR, URL
h. Choose Ok and Save
4. Transaction SCOT Setup a job to execute the send process on the queue.
a. (MENU) View -> Jobs
i. Select the Create Button
ii. Job Name: SAPConnect
iii. Put Cursor on Variant: SAP&CONNECTINT *As you created an INT Node, you need to run the variant for all of the INT sending. You can select SAP&CONNECTALL, but if you are not using any other node types, you can run with SAP&CONNECTINT.
iv. Select: Schedule Job Button
v. Schedule job for a periodic run approx. every 15 minutes
vi. Save
5. Transaction SU01 Maintain each users email address
a. Select users who require the ability to email from SAP
b. Under the address tab, in SU01, maintain their email address.
Steps to perform on the SAP system (operating System):
1. Create a directory for the SAP programs.
a. Create directory c:sapmail (Directory can be anything)
b. Unpack the ML*.CAR file from SAPs website
c. Alternatively, copy the ML* files from /usr/sap/../run/ directory. This ensures version compatibility with your SAP instance.
2. Create the directories for your sendmail program
a. http://emailrelay.sourceforge.net/
i. Download the emailrelay program
b. Create directory c:winntspoolemailrelay
i. Unpack the contents of the emailrelay zip into this directory
c. create Directory c:reskit (Used to make the emailrelay program run as a service
i. http://www.tacktech.com/display.cfm?ttid=197
1. www.tacktech.com had some great instructions for creating a service on the NT side. (Thank you Tacktech)
2. Use SRVANY to create the services, as documented below.
d. Open command prompt
e. Follow instructions for creating a service
i. cd reskit
ii. execute c:reskitinstsrv.exe "<SERVICE_NAME_Engine>" c:reskitsrvany.exe
1. This service is the engine
iii. execute c:reskitinstsrv.exe "<SERVICE_NAME_Send_Process>" c:reskitsrvany.exe
1. This service is the send process
iv. Modify the registry to represent the two new services
v. View instructions for Parameters and Application Creation under the services in the registry
vi. Command lines should be as follows:
1. <SERVICE_NAME_Engine> - c:winntspoolemailrelayemailrelay.exe --as-server --no-daemon
2. <SERVICE_NAME_Send_Process> - c:winntspoolemailrelayemailrelay.exe --no-daemon -hidden --forward-to (your_mailhost):SMTP --poll 5
vii. Start the services using service mgr.
f. cmd prompt cd sapmail
g. mlsomadm c:sapmailmailgw.ini (see below)
3. Create a mailgw.ini file (This file is used by the mlunxsnd program)
a. Open a command prompt
b. Change to the directory c:sapmail
c. Run command mlsomadm c:sapmailmailgw.ini
i. This creates the parameter file for the send process.
d. MAILGW.INI entries
i. System Name: [SID]
ii. Client: [000]
iii. Username: [MAILADM] no user required, as this is not being used for your connection
iv. Password: [*******] leave empty
v. Language: [E]
vi. Load Balancing: [N]
vii. Hostname: [app_server_name]
viii. System Number: [00]
ix. Gateway Hostname: [ ] you do not have to specify, it will use the default
x. Gateway Service: [ ] default will be used
xi. Use SAP Router: [N]
xii. Set Bcc Flag on Env..: [N]
xiii. Trace Level <In..>: 1
xiv. Trace file <In..> c:sapmailtracein.txt - Can be where ever you want
xv. Sendmail Command: c:winntspoolemailrelaysubmit -from <SENDER_ADDRESS>
xvi. A warning may come up that says to not use the t flag. IGNORE
xvii. Codepage: [ISO-8859-1]
xviii. Generate Notificat..: [N]
xix. Trace Level <Out..: [1]
xx. Trace File <Out..>: c:sapmailtraceout.txt - Can be where ever you want
xxi. Update File c:sapmailmailgw.ini [Y]
Steps to perform on the Microsoft Exchange System
1. Allow the SAP systems to enter on port 25 to send mails using Microsoft Exchange (SMTP Communication)
reward points ....
Girish

Error establishing socket to host and port: EPM11:1433

Hi Planning Experts,
I am trying to configure EPM 11.1.2.1 (Planning)
RDBMS: SQL server 2005 (Express Edition)
OS: 2008 R2 x64
i am getting error after providing RDBMS credentials "error establishing socket to host and port: EPM11:1433 Reson: connection refused: connect"
Please help....
Regards
Kumar

You may need to enable tcp/ip
SQL Server Express listens on local named pipes and shared memory. With a default installation, you cannot remotely connect to SQL Server Express. You will need to enable TCP/IP and check if the firewall is enabled.
To enable TCP/IP:
From the Start menu, choose All Programs, point to Microsoft SQL Server 2005, point to Configuration Tools, and then click SQL Server Configuration Manager.
Optionally, you can open Computer Manager by right-clicking My Computer and choosing Manage. In Computer Management, expand Services and Applications, expand SQL Server Configuration Manager.
Expand SQL Server 2005 Network Configuration, and then click Protocols for InstanceName.
In the list of protocols, right-click the protocol you want to enable, and then click Enable.
The icon for the protocol will change to show that the protocol is enabled.
Cheers
John
http://john-goodwin.blogspot.com/

Webutil HOST and NO_SCREEN option

Similar Messages

Maybe you are looking for