Webutil Host bean error

I'm trying to use the webutil.nonblocking procedure, i followed all the steps in the user guide to install the webutil and i attached the library to the form and subclassed the object group, but when running the form i receive this error
oracle.forms.webutil.host.Host bean not found.Webutil_host.execute will not work
can anybody help
regards
lilian

Problem solved ..
check for the following
1- make sure the virtual path in the orion-xml file is correctly set.
2-make sure that the signature of the jacob,jar and frmwebutil.jar is successfully done.
3- check the WebArchive entry is correctly set
hope this will help ..
Regards
Lilian

Similar Messages

WebUtil: oracle.forms.webutil.host.Host bean not found

Hi. This is my first attempt using WebUtil. The following code is in my When-New-Form-Instance trigger:
client_host('N:\TTMS\ITS\vbasic\compiled\MenuUpdate.exe');
This is the error I receive:
oracle.forms.webutil.host.Host bean not found
I've included my formsweb.cfg below for your reference. Note that the application is using the [ttmsmenu] configuration.
Thanks in advance for your help with this problem.
***FORMSWEB.CFG***
# $Id: formsweb.cfg 15-apr-2005.13:17:30 pkuhn Exp $
# formsweb.cfg defines parameter values used by the FormsServlet (frmservlet)
# This section defines the Default settings. Any of them may be overridden in the
# following Named Configuration sections. If they are not overridden, then the
# values here will be used.
# The default settings comprise two types of parameters: System parameters,
# which cannot be overridden in the URL, and User Parameters, which can.
# Parameters which are not marked as System parameters are User parameters.
# SYSTEM PARAMETERS
# These have fixed names and give information required by the Forms
# Servlet in order to function. They cannot be specified in the URL query
# string. But they can be overridden in a named configuration (see below).
# Some parameters specify file names: if the full path is not given,
# they are assumed to be in the same directory as this file. If a path
# is given, then it should be a physical path, not a URL.
# USER PARAMETERS
# These match variables (e.g. %form%) in the baseHTML file. Their values
# may be overridden by specifying them in the URL query string
# (e.g. "http://myhost.mydomain.com/forms/frmservlet?form=myform&width=700")
# or by overriding them in a specific, named configuration (see below)
[default]
#WebUtilArchive=frmwebutil.jar,jacob.jar
#WebUtilLogging=off
#WebUtilLoggingDetail=normal
#WebUtilErrorMode=Alert
#WebUtilDispatchMonitorInterval=5
#WebUtilTrustInternal=true
#WebUtilMaxTransferSize=16384
# System parameter: default base HTML file
baseHTML=base.htm
# baseHTML=webutilbase.htm
# System parameter: base HTML file for use with JInitiator client
baseHTMLjinitiator=basejini.htm
# baseHTMLjinitiator=webutiljini.htm
# System parameter: base HTML file for use with Sun's Java Plug-In
baseHTMLjpi=basejpi.htm
# baseHTMLjpi=webutiljpi.htm
# System parameter: delimiter for parameters in the base HTML files
HTMLdelimiter=%
# System parameter: working directory for Forms runtime processes
# WorkingDirectory defaults to <oracle_home>/forms if unset.
workingDirectory=
# System parameter: file setting environment variables for the Forms runtime processes
envFile=default.env
# Forms runtime argument: whether to escape certain special characters
# in values extracted from the URL for other runtime arguments
escapeparams=true
# Forms runtime argument: which form module to run
form=test.fmx
# Forms runtime argument: database connection details
userid=
# Forms runtime argument: whether to run in debug mode
debug=no
# Forms runtime argument: host for debugging
host=
# Forms runtime argument: port for debugging
port=
# Other Forms runtime arguments: grouped together as one parameter.
# These settings support running and debugging a form from the Builder:
otherparams=buffer_records=%buffer% debug_messages=%debug_messages% array=%array% obr=%obr% query_only=%query_only% quiet=%quiet% render=%render% record=%record% tracegroup=%tracegroup% log=%log% term=%term%
# Sub argument for otherparams
buffer=no
# Sub argument for otherparams
debug_messages=no
# Sub argument for otherparams
array=no
# Sub argument for otherparams
obr=no
# Sub argument for otherparams
query_only=no
# Sub argument for otherparams
quiet=yes
# Sub argument for otherparams
render=no
# Sub argument for otherparams
record=
# Sub argument for otherparams
tracegroup=
# Sub argument for otherparams
log=
# Sub argument for otherparams
term=
# HTML page title
pageTitle=Oracle Application Server Forms Services
# HTML attributes for the BODY tag
HTMLbodyAttrs=
# HTML to add before the form
# HTMLbeforeForm=
HTMLbeforeForm=<SCRIPT LANGUAGE="JavaScript">window.opener = top;</SCRIPT>
# HTML to add after the form
HTMLafterForm=
# Forms applet parameter: URL path to Forms ListenerServlet
serverURL=/forms/lservlet
# Forms applet parameter
codebase=/forms/java
# Forms applet parameter
#imageBase=DocumentBase
imageBase=codeBase
# Forms applet parameter default 750
# width=1000
# width=100%
width=500
# Forms applet parameter default 600
# height=700
# height=100%
height=500
# Forms applet parameter default false
separateFrame=true
# Forms applet parameter
# splashScreen=
splashScreen=no
#splashScreen=ttmslogo_new.gif
# Forms applet parameter
background=ttmslogo_new.gif
# Forms applet parameter
lookAndFeel=Oracle
# Forms applet parameter
colorScheme=teal
# Forms applet parameter
logo=ttms_banner.gif
# Forms applet parameter
restrictedURLparams=HTMLbodyAttrs,HTMLbeforeForm,pageTitle,HTMLafterForm,log,allow_debug,allowNewConnections
# Forms applet parameter
formsMessageListener=
# Forms applet parameter
recordFileName=
# Forms applet parameter
serverApp=default
# Forms applet archive setting for JInitiator
archive_jini=frmall_jinit.jar
# Forms applet archive setting for other clients (Sun Java Plugin, Appletviewer, etc)
archive=frmall.jar
# Number of times client should retry if a network failure occurs. You should
# only change this after reading the documentation.
networkRetries=0
# Page displayed to Netscape users to allow them to download Oracle JInitiator.
# Oracle JInitiator is used with Windows clients.
# If you create your own page, you should set this parameter to point to it.
jinit_download_page=/forms/jinitiator/us/jinit_download.htm
# Parameter related to the version of JInitiator
jinit_classid=clsid:CAFECAFE-0013-0001-0022-ABCDEFABCDEF
# Parameter related to the version of JInitiator
jinit_exename=jinit.exe#Version=1,3,1,22
# Parameter related to the version of JInitiator
jinit_mimetype=application/x-jinit-applet;version=1.3.1.22
# Page displayed to users to allow them to download Sun's Java Plugin.
# Sun's Java Plugin is typically used for non-Windows clients.
# (NOTE: you should check this page and possibly change the settings)
jpi_download_page=http://java.sun.com/products/archive/j2se/1.4.2_06/index.html
# Parameter related to the version of the Java Plugin
jpi_classid=clsid:CAFEEFAC-0014-0002-0006-ABCDEFFEDCBA
# Parameter related to the version of the Java Plugin
jpi_codebase=http://java.sun.com/products/plugin/autodl/jinstall-1_4_2-windows-i586.cab#Version=1,4,2,06
# Parameter related to the version of the Java Plugin
jpi_mimetype=application/x-java-applet;jpi-version=1.4.2_06
# EM config parameter
# Set this to "1" to enable Enterprise Manager to track Forms processes
em_mode=0
# Single Sign-On OID configuration parameter
oid_formsid=%OID_FORMSID%
# Single Sign-On OID configuration parameter
oracle_home=C:\DevSuiteHome_1
# Single Sign-On OID configuration parameter
formsid_group_dn=%GROUP_DN%
# Single Sign-On OID configuration parameter: indicates whether we allow
# dynamic resource creation if the resource is not yet created in the OID.
ssoDynamicResourceCreate=true
# Single Sign-On parameter: URL to redirect to if ssoDynamicResourceCreate=false
ssoErrorUrl=
# Single Sign-On parameter: Cancel URL for the dynamic resource creation DAS page.
ssoCancelUrl=
# Single Sign-On parameter: indicates whether the url is protected in which
# case mod_osso will be given control for authentication or continue in
# the FormsServlet if not. It is false by default. Set it to true in an
# application-specific section to enable Single Sign-On for that application.
ssoMode=false
# The parameter allow_debug determines whether debugging is permitted.
# Administrators should set allow_debug to "true" if servlet
# debugging is required, or to provide access to the Forms Trace Xlate utility.
# Otherwise these activities will not be allowed (for security reasons).
allow_debug=false
# Parameter which determines whether new Forms sessions are allowed.
# This is also read by the Forms EM Overview page to show the
# current Forms status.
allowNewConnections=true
# EndUserMonitoring
# EndUserMonitoringEnabled parameter
# Indicates whether EUM/Chronos integration is enabled
EndUserMonitoringEnabled=
# EndUserMonitoringURL
# indicates where to record EUM/Chronos data
EndUserMonitoringURL=
# Example Named Configuration Section
# Example 1: configuration to run forms in a separate browser window with
# "generic" look and feel (include "config=sepwin" in the URL)
# You may define your own specific, named configurations (sets of parameters)
# by adding special sections as illustrated in the following examples.
# Note that you need only specify the parameters you want to change. The
# default values (defined above) will be used for all other parameters.
# Use of a specific configuration can be requested by including the text
# "config=<your_config_name>" in the query string of the URL used to run
# a form. For example, to use the sepwin configuration, your could issue
# a URL like "http://myhost.mydomain.com/forms/frmservlet?config=sepwin".
[sepwin]
separateFrame=True
lookandfeel=Generic
# Example Named Configuration Section
# Example 2: configuration forcing use of the Java Plugin in all cases (even if
# the client browser is on Windows)
[jpi]
baseHTMLJInitiator=basejpi.htm
# Example Named Configuration Section
# Example 3: configuration running the Forms ListenerServlet in debug mode
# (debug messages will be written to the servlet engine's log file).
[debug]
serverURL=/forms/lservlet/debug
# Sample configuration for deploying WebUtil. Note that WebUtil is shipped with
# DS but not AS and is also available for download from OTN.
[webutil]
WebUtilArchive=frmwebutil.jar,jacob.jar
WebUtilLogging=off
WebUtilLoggingDetail=normal
WebUtilErrorMode=Alert
WebUtilDispatchMonitorInterval=5
WebUtilTrustInternal=true
WebUtilMaxTransferSize=16384
baseHTMLjinitiator=webutiljini.htm
baseHTMLjpi=webutiljpi.htm
archive_jini=frmall_jinit.jar
archive=frmall.jar
lookAndFeel=oracle
[ttmsmenu]
WebUtilArchive=frmwebutil.jar,jacob.jar
WebUtilLogging=off
WebUtilLoggingDetail=normal
WebUtilErrorMode=Alert
WebUtilDispatchMonitorInterval=5
WebUtilTrustInternal=true
WebUtilMaxTransferSize=16384
baseHTMLjinitiator=webutiljini.htm
baseHTMLjpi=webutiljpi.htm
baseHTML=webutilbase.htm
archive_jini=frmall_jinit.jar
archive=frmall.jar
lookAndFeel=oracle
width=500
height=500
background=no
form=ttmsmenu.fmx

Dumb dumb dumb.
I was running this form out of Form Builder 10g. At some point I changed the Application Server URL (Edit => Preferences => Runtime menus) from:
http://ssbuechl2.div16.ibm.com:8889/forms/frmservlet?config=ttmsmenu
to:
http://ssbuechl2.div16.ibm.com:8889/forms/frmservlet?
So my customized configuration with all the WebUtil references was not being referenced and I was getting the error.
Dumb dumb dumb.

No route to host:connect -- error in the struts-config.xml file

hi all,
acutally am doing a struts application in that i have written everything properly
but getting this kinda no route to host:connect error
my struts-config.xml file is like this...
<struts-config>
<form-beans>
<form-bean name="myForm" type="MyForm">
</form-beans>
<action-mappings>
<action path="/action"
               name="myForm"
               type="MyAction"
               scope="request"
               validate="true" >
               <forward name="success" path="/success.jsp" />
               <forward name="failure" path="/failure.jsp" />
     </action>
</action-mappings>
</struts-config>
sikandar

Hi Lee,
I am working on Oracle ADF 10.1.2 and getting the same problem. The lines in my struts-config.xml are as below:
<action path="/unitsView" className="oracle.adf.controller.struts.actions.DataActionMapping" type="view.UnitsViewAction" name="DataForm" parameter="/unitsView.uix" unknown="false">
<set-property property="modelReference" value="unitsViewUIModel"/>
<forward name="unitsEditLink" path="/unitsEdit.do"/>
</action>
<action path="/unitsView" className="oracle.adf.controller.struts.actions.DataActionMapping" type="view.UnitsViewAction" name="DataForm" parameter="/unitsView.uix" unknown="false">
<set-property property="modelReference" value="unitsViewUIModel"/>
<forward name="unitsCreateLink" path="/unitsCreate.do"/>
</action>
I have two lines with [action path="/unitsView"]. The reason why is that I want the user to go to the form create screen for the create button and form edit screen for the edit button. If this does not work, it seems to mean that only a single screen can be used for create/edit functions. However, the ADF editor diagram looks perfectly to point to create.uix and edit.uix respectively.
Please shed some light.
Thanks,
Regards,
Michael

Can't Create Bean Error

I modified the numguess example that comes with tomcat but I get a "can't create bean" error message when I call my jsp file. If anyone can see what I'm doing wrong or suggest ways to discover the problem I'd appreciate it.
My modified jsp:

<%@ page import = "num.NumberGuessBean" %>
<jsp:useBean id="numguess" class="num.NumberGuessBean" scope="session"/>
<jsp:setProperty name="numguess" property="*"/>
<html>
<head><title>Number Guess</title></head>
<body bgcolor="white">
<font size=4>
<% if (numguess.getSuccess()) { %>
Congratulations! You got it.
And after just <%= numguess.getNumGuesses() %> tries.<p>
<% numguess.reset(); %>
Care to try again?
<% } else if (numguess.getNumGuesses() == 0) { %>
Welcome to the Number Guess game.<p>
Play with default limits ( a number between 0 and 100)<p>
or enter upper and lower limits.<p>
<form method=get>
Play with defaults?: <input type=radio name=default value="yes">Yes
<input type=radio name=default value="no">No
<\form>
<% if (numguess.getRadio().equals("no")) { %>
<form method=get>
Enter upper limit:<input type=text name=upperLimit>
Enter lower limit:<input type=text name=lowerLimit>
<\form>
<% numguess.reset(); %>
<% } %>
<form method=get>
What's your guess? <input type=text name=guess>
<input type=submit value="Submit">
</form>
<% } else { %>
Good guess, but nope. Try <b><%= numguess.getHint() %></b>.
You have made <%= numguess.getNumGuesses() %> guesses.<p>
I'm thinking of a number between <jsp:getProperty name="numguess" property="lowerLimit"/> and <jsp:getProperty name="numguess" property="upperLimit"/>.<p>
<form method=get>
What's your guess? <input type=text name=guess>
<input type=submit value="Submit">
</form>
<% } %>
</font>
</body>
</html>
and the modified bean:
* ====================================================================
* The Apache Software License, Version 1.1
* Copyright (c) 1999 The Apache Software Foundation. All rights
* reserved.
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. The end-user documentation included with the redistribution, if
* any, must include the following acknowlegement:
* "This product includes software developed by the
* Apache Software Foundation (http://www.apache.org/)."
* Alternately, this acknowlegement may appear in the software itself,
* if and wherever such third-party acknowlegements normally appear.
* 4. The names "The Jakarta Project", "Tomcat", and "Apache Software
* Foundation" must not be used to endorse or promote products derived
* from this software without prior written permission. For written
* permission, please contact [email protected].
* 5. Products derived from this software may not be called "Apache"
* nor may "Apache" appear in their names without prior written
* permission of the Apache Group.
* THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESSED OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE APACHE SOFTWARE FOUNDATION OR
* ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
* USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
* OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
* ====================================================================
* This software consists of voluntary contributions made by many
* individuals on behalf of the Apache Software Foundation. For more
* information on the Apache Software Foundation, please see
* <http://www.apache.org/>.
* Originally written by Jason Hunter, http://www.servlets.com.
package num;
import java.util.*;
public class NumberGuessBean {
int answer;
boolean success;
String hint;
int numGuesses;
String radiochoice;
int lowerLimit=0;
int upperLimit=100;
String error;
public NumberGuessBean() {
reset();
public void setGuess(String guess) {
numGuesses++;
int g;
try {
g = Integer.parseInt(guess);
catch (NumberFormatException e) {
g = -1;
if (g == answer) {
success = true;
else if (g == -1) {
hint = "a number next time";
else if (g < answer) {
hint = "higher";
else if (g > answer) {
hint = "lower";
public void setRadio(String s) {
     radiochoice=s;
public String getRadio() {
     return radiochoice;
public void setLowerLimit( int lowerLimit) {
     this.lowerLimit=lowerLimit;
public int getLowerLimit() {
     return lowerLimit;
public void setUpperLimit(int upperLimit) {
     this.upperLimit=upperLimit;
public int getUpperLimit() {
     return upperLimit;
public boolean getSuccess() {
return success;
public String getHint() {
return "" + hint;
public String getError() {
     return ""+error;
public int getNumGuesses() {
return numGuesses;
public void reset() {
     if (getRadio().equals("yes")) {
          answer = (int)(Math.random()*100);
     else {
          int i;
          i=(int)(Math.random()*upperLimit);
          if (i<lowerLimit) {
               i=i+lowerLimit;
          answer=i;
     success = false;
numGuesses = 0;

implement synchronizable and createa constructor, then check it once again.

"Network host busy" error

Hi, everyone. I have trawled this discussion list and followed all the advice available to no avail. Any help would certainly be appreciated.
The background is as follows:
MacBook Pro, 2.33GHz Intel Core 2 duo, 2GB RAM, currently running OSX 10.6.2. Software up to date. Previously on OSX 10.4.11 until 4 weeks ago. Printing to a networked HP 4100 with a fixed IP address in the office worked fine until last week, when a "Network host busy error, trying again in 30 seconds" error arose. Printing from the other workstations (iMacs on 10.6.2) on the network continues to proceed normally. Steps I have taken include deleting the HP4100 print queue and re-installing (several times) as IP>HPJetDirect socket to 192.168.1.100. Clearly the printer is online (it says so) and is identified as the correct printer driver is selected automatically (HP LaserJet 4100 series v 3010.107) and all the configurable options are correctly selected (trays 2,3 & 4, envelope feeder and duplex option) and toner supply levels are correctly read. Still get network host busy error. Rebooted the printer. No avail. Rebooted the router. No avail. Reinstalled HP printer drivers from here: http://support.apple.com/downloads/#printer%20drivers%20mac%20os%20x%20v10.6. No avail. Have also reset the printing system (losing all the other print queues in the process!) to no avail. Checked the printer setup on the iMacs that can print, and it is identical to that which I am attempting to install. Have I missed something? Anyone with any clues, please?

Hi there,
If you have your HP printer queue configured exactly the same as other Mac's that are working fine, and with all the steps you have taken thus far, then I can only suggest that you either have a network issue or something blocking the path.
So first thing is to check that you are set to the same subnet as the other Mac's. This can be confirmed via the Network Utility under the Info pane. You may have to change the drop menu from Ethernet (en0) to Airport (en1) depending on what you use. Typically the first three sets of numbers of your IP address is your subnet, while the last number is your network address. So, based on the printers address of 192.168.1.100, your Mac should have a subnet of 192.168.1 and a network address other than 100.
If the IP address for your Mac is set to the same subnet as the HP then while Network Utility is still open, select the Ping tab, enter the IP address of 192.168.1.100, set the number of Pings to 4 and press the Ping button. You should get a response from the printer.
If you do get a response then it is safe to assume that the network setup on your Mac is okay. At this stage I would check that your Firewall is disabled (located in System Preferences > Security).
If the firewall is not enabled then my last suggestion is to create another printer queue to the HP, this time selecting IP > LPD for the protocol. Since HP wrote Socket then it is odd that it would not be working, but a network host busy would indicate that the Mac cannot either communicate with the IP address or the Port of the selected IP address. By changing the protocol from HP Socket to LPD you are basically setting the Mac to connect on port 515 instead of 9100.
Note that if the other Mac's show the print queue URL as "socket://192.168.1.100/" then they are using HP Jetdirect also so it would make no sense that your connection to the same port would fail. But it can't hurt trying an alternate protocol when you have tried everything else...
HTH and reply if needed.
Pahu

Webutil.host.HostBean not found WEBUTIL_HOST.execute will not work

Hi everyone:
I've got a form. I've attached webtill.pll and subclassed webutil.olb.
In the WHEN-NEW-FORM-INSTANCE trigger it does:
client_host('cmd /c cd > arch.txt');
When I execute my form I got the errror:
webutil.host.HostBean not found
WEBUTIL_HOST.execute will not work
Could anyone give me some help on it?
Thanks!
Carolina

Hi!
this is what I got in the Java console
JInitiator: Versión 1.3.1.22
Usar versión JRE 1.3.1.22-internal Java HotSpot(TM) Client VM
Directorio local del usuario = C:\Documents and Settings\Administrador
Configuración del delegado: sin delegado
JAR cache enabled
Location: C:\Documents and Settings\Administrador\Oracle Jar Cache
Maximum size: 50 MB
Compression level: 0
c: clear console window
f: finalize objects on finalization queue
g: garbage collect
h: display this help message
l: dump classloader list
m: print memory usage
q: hide console
s: dump system properties
t: dump thread list
x: clear classloader cache
0-5: set trace level to <n>
Loading http://rx26201:7778/forms/java/frmall_jinit.jar from JAR cache
Loading http://rx26201:7778/forms/java/frmwebutil.jar from JAR cache
Loading http://rx26201:7778/forms/java/jacob.jar from JAR cache
Loading http://rx26201:7778/forms/java/dgrImages.jar from JAR cache
proxyHost=null
proxyPort=0
connectMode=HTTP, native.
La versión del applet Forms es: 10.1.2.0
thanks!

Webutil.host and space in filename ....

Hello,
Do someone have found a solution at the problem of space in filename calling whith webutil.host ?
under winxp if I do :
CMD /C start "C:\Program Files\Microsoft Office\OFFICE11\WINWORD.EXE" "C:\travail\COMMENTAIRES DU DOSSIER 5200257".doc
it works well
But do the same in Webutil.host command ... and it fail :<
I see that this was an old problem in post but dunot have found any response ..
tk anyway.

So, i have try all these options and found that webutil seems to cut spaces.
As I have this
LC$Cmd := 'cmd /c start "C:\Program files\Microsoft Office\OFFICE11\WINWORD.EXE" "c:\travail\COMMENTAIRES DU DOSSIER 5200257.doc"'
WEBUTIL_HOST.Nonblocking( LC$Cmd ) ;
webutil launch :
"C:\Program files\Microsoft Office\OFFICE11\WINWORD.EXE" "c:\travail\COMMENTAIRES DU DOSSIER 5200257.doc"'
and so it dunot found the document
bcs it make all space -> 1 space
strange !!
perlaps some have got same problem ?

How I fixed the 'network host busy" error

I've been down for a day solving the "network host busy' error.
First, I had fits trying to hook up this HP to my system. Here's the thread on that:
http://forums.techguy.org/networking/858081-laserjet-4500-mac-osx-10-a.html
Once all that was done, it was working.
The system was off and sometimes unplugged over the course of the evening.
I could not get it to work again.
It turned out that somehow during the course of events, the ip number of the printer had changed. I printed out the configuration page directly from the printer's configuration menu, and reset the ip address to match the new one.
Protocol in this case was HP Jet Direct socket.
Hope that helps someone out there. It looks like there are a lot of people tearing their hair out over this message and that there is no one solution.

I just found a solution to this problem and thought I would post it here, too.
I'm using a HP Photosmart C7280 with 10.6.1
Ever since updating to Snow Leopard, I kept receiving the "Network host busy" message. Today, I thought I would try running the network wizard feature on the printer itself, and after the printer connected to my router and I entered the password, the problem fixed itself. No more error message.
I'm not sure if this will work for everyone, but it did for me. Such an easy solution for such a headache-inducing problem.
Message was edited by: TNTWhite

Webutil: WUT-100 error

Hello,
I'm getting WebUtil WUT-100 error, thus:
Loading http://2ua300tw.epcor.ca:8890/forms90/webutil/webutil.jar from JAR cache
Loading http://2ua300tw.epcor.ca:8890/forms90/java/f90all_jinit.jar from JAR cache
RegisterWebUtil - Loading Webutil Version 1.0.2 Beta
Loading http://2ua300tw.epcor.ca:8890/forms90/webutil/jacob.jar from JAR cache
proxyHost=null
proxyPort=0
connectMode=HTTP, native.
Forms Applet version is : 9.0.4.0
2004-Aug-03 11:47:02.826 ERROR>WUT-100 [FileTransfer.defineFile()] Bad file information string: |0|S|Y|File Upload|Loading . Please wait...
I've checked the discussion forum, but I couldn't find any discussion relating to this error. Does anyone know how to resolve this problem?
Thanks,
gk

Harm,
I get the same error here, but my file is not being uploaded.
You need to provide a string to the progressSubtitle parameter of the client_to_as_with_progress function, not only ''.
This works for me.
HTH
Gerald

Webutil-- oracle.forms.webutil.browserFunctions bean not found

hi friends,
im in great trouble
i got assignment from company and its very urgent
i want to change coffee cup of browser window...i m trying to use webutil, i have done following things
1.I have developer suit 9.0.4
2.I have Jinitiator1.3.1.17
3.download and unzip webutil_106 in forms90 folder
4.adding frmwebutil.jar in forms90_BUILDER_CLASSPATH
5.Create single virtual directory in orion web.xml and in forms90.config file
6.add frmwebutil.jar in formsweb.cfg and replace webutil.htm files e.g bashtml,basehtmljinitiater,basehtmljpi.
7.webutil entries in envirmnent file
8.attatch liabray webutill.pll with my form,
9. open webutil.olb and copy it into object group
10.create timer at when new_form_instance
11.on timer expiratation using following code
     if WEBUTIL_SEPARATEFRAME.IsSeparateFrame then
                                        WebUtil_SeparateFrame.SetTitle('DTS');
                                        webUtil_SeparateFrame.SetIcon('execute.gif');
and restart oc4j
but problem is still comming when timer expire i got following message
oracle.forms.webutil.browserFunctions bean not found
plz anyone help if im missing any step or doing something wrong
thanks

hi friends,
im in great trouble
i got assignment from company and its very urgent
i want to change coffee cup of browser window...i m trying to use webutil, i have done following things
1.I have developer suit 9.0.4
2.I have Jinitiator1.3.1.17
3.download and unzip webutil_106 in forms90 folder
4.adding frmwebutil.jar in forms90_BUILDER_CLASSPATH
5.Create single virtual directory in orion web.xml and in forms90.config file
6.add frmwebutil.jar in formsweb.cfg and replace webutil.htm files e.g bashtml,basehtmljinitiater,basehtmljpi.
7.webutil entries in envirmnent file
8.attatch liabray webutill.pll with my form,
9. open webutil.olb and copy it into object group
10.create timer at when new_form_instance
11.on timer expiratation using following code
     if WEBUTIL_SEPARATEFRAME.IsSeparateFrame then
                                        WebUtil_SeparateFrame.SetTitle('DTS');
                                        webUtil_SeparateFrame.SetIcon('execute.gif');
and restart oc4j
but problem is still comming when timer expire i got following message
oracle.forms.webutil.browserFunctions bean not found
plz anyone help if im missing any step or doing something wrong
thanks

Wrong exception being thrown on CMP bean error

In OC4J Release 2 I'm getting the wrong exception thrown from a CMP bean error.
Situation:
Servlet calls an update method on a stateless session bean with trans-attribute of Required. This update method finds 2 entity beans by primary key and updates both of them (all with trans-attribute of Supports). When an error is thrown in the second entity bean (by trying to set a value to something that breaks a constraint), I get the following error:
com.evermind.server.rmi.OrionRemoteException: Transaction was rolled back: Error preparing bean instance: com.evermind.transaction.MarshallingXAException
at TestSession_StatefulSessionBeanWrapper3.updatebothtests(TestSession_StatefulSessionBeanWrapper3.java:1164)
at __jspPage1_insertEntityTest_jsp._jspService(__jspPage1_insertEntityTest_jsp.java:224)
at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:56)
at com.evermind.server.http.HttpApplication.serviceJSP(HttpApplication.java:5680)
at com.evermind.server.http.JSPServlet.service(JSPServlet.java:31)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:667)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:269)
at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:702)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:250)
at com.evermind.util.ThreadPoolThread.run(ThreadPoolThread.java:62)
Nested exception is:
com.evermind.transaction.MarshallingXAException
at com.evermind.server.ejb.EntityEJBObject.prepare(EntityEJBObject.java:70)
at com.evermind.server.ApplicationServerTransactionSynchronization.prepareComponentsSuccess(ApplicationServerTransactionSynchronization.java:403)
at com.evermind.server.ApplicationServerTransactionSynchronization.beforeCompletion(ApplicationServerTransactionSynchronization.java:565)
at com.evermind.server.ApplicationServerTransaction.beforeCompletion(ApplicationServerTransaction.java:1063)
at com.evermind.server.ApplicationServerTransaction.commit(ApplicationServerTransaction.java:552)
at com.evermind.server.ApplicationServerTransaction.end(ApplicationServerTransaction.java:834)
at TestSession_StatefulSessionBeanWrapper3.updatebothtests(TestSession_StatefulSessionBeanWrapper3.java:1160)
at __jspPage1_insertEntityTest_jsp._jspService(__jspPage1_insertEntityTest_jsp.java:224)
at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:56)
at com.evermind.server.http.HttpApplication.serviceJSP(HttpApplication.java:5680)
at com.evermind.server.http.JSPServlet.service(JSPServlet.java:31)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:667)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:269)
at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:702)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:250)
at com.evermind.util.ThreadPoolThread.run(ThreadPoolThread.java:62)
Nested exception is:
java.lang.InternalError: Werent current caller, server stacktrace (to disable this message, use -Dejb.assert=false at startup): java.lang.Throwable: Werent current caller
at Test2_EntityBeanWrapper5.setEntityBean(Test2_EntityBeanWrapper5.java:1496)
at com.evermind.server.ejb.EntityEJBHome.passivateAndRelease(EntityEJBHome.java:344)
at com.evermind.server.ejb.EntityEJBObject.releaseContext(EntityEJBObject.java:378)
at Test2_EntityBeanWrapper5.saveState(Test2_EntityBeanWrapper5.java:1442)
at com.evermind.server.ejb.EntityEJBObject.prepare(EntityEJBObject.java:39)
at com.evermind.server.ApplicationServerTransactionSynchronization.prepareComponentsSuccess(ApplicationServerTransactionSynchronization.java:403)
at com.evermind.server.ApplicationServerTransactionSynchronization.beforeCompletion(ApplicationServerTransactionSynchronization.java:565)
at com.evermind.server.ApplicationServerTransaction.beforeCompletion(ApplicationServerTransaction.java:1063)
at com.evermind.server.ApplicationServerTransaction.commit(ApplicationServerTransaction.java:552)
at com.evermind.server.ApplicationServerTransaction.end(ApplicationServerTransaction.java:834)
at TestSession_StatefulSessionBeanWrapper3.updatebothtests(TestSession_StatefulSessionBeanWrapper3.java:1160)
at __jspPage1_insertEntityTest_jsp._jspService(__jspPage1_insertEntityTest_jsp.java:224)
at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:56)
at com.evermind.server.http.HttpApplication.serviceJSP(HttpApplication.java:5680)
at com.evermind.server.http.JSPServlet.service(JSPServlet.java:31)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:667)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:269)
at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:702)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:250)
at com.evermind.util.ThreadPoolThread.run(ThreadPoolThread.java:62) at Test2_EntityBeanWrapper5.setEntityBean(Test2_EntityBeanWrapper5.java:1496)
at com.evermind.server.ejb.EntityEJBHome.passivateAndRelease(EntityEJBHome.java:344)
at com.evermind.server.ejb.EntityEJBObject.releaseContext(EntityEJBObject.java:378)
at Test2_EntityBeanWrapper5.saveState(Test2_EntityBeanWrapper5.java:1442)
at com.evermind.server.ejb.EntityEJBObject.prepare(EntityEJBObject.java:39)
at com.evermind.server.ApplicationServerTransactionSynchronization.prepareComponentsSuccess(ApplicationServerTransactionSynchronization.java:403)
at com.evermind.server.ApplicationServerTransactionSynchronization.beforeCompletion(ApplicationServerTransactionSynchronization.java:565)
at com.evermind.server.ApplicationServerTransaction.beforeCompletion(ApplicationServerTransaction.java:1063)
at com.evermind.server.ApplicationServerTransaction.commit(ApplicationServerTransaction.java:552)
at com.evermind.server.ApplicationServerTransaction.end(ApplicationServerTransaction.java:834)
at TestSession_StatefulSessionBeanWrapper3.updatebothtests(TestSession_StatefulSessionBeanWrapper3.java:1160)
at __jspPage1_insertEntityTest_jsp._jspService(__jspPage1_insertEntityTest_jsp.java:224)
at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:56)
at com.evermind.server.http.HttpApplication.serviceJSP(HttpApplication.java:5680)
at com.evermind.server.http.JSPServlet.service(JSPServlet.java:31)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:667)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:269)
at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:702)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:250)
at com.evermind.util.ThreadPoolThread.run(ThreadPoolThread.java:62)
Why am I getting a MarshallingXAException instead of a SQLException? In the old OC4J, I got a SQLException wrapped in an OrionRemoteException, with the details of what constraint was broken, instead of this.
I've also duplicated this by doing the entity bean updates directly from the servlet wrapped in a UserTransaction.
Jeff.

Tell me whether your transaction has been rolled back or not....If it has been rolled back, then those messages, printed on your server console are debug messages...just ignore them...
After this exception, can u able to execute other applications in OC4J?
--Venky

Failed: 4x Host[hostname] error: NewMovieFromFile Failed -2048 Help please

I have seen a lot of talk about this error but none of it really applies to my situation.
Failed: 4x Host[hostname] error: NewMovieFromFile Failed -2048
I am compression a large number on video files most of them are media100 or mpeg4 or mpeg2. Most of the files work just fine but a few of them just won't work. I get the same error each time just on a different Mac.
I have a managed cluster setup with 5 G5s. I have 1 mac control all the others and the files are submitted from one of the other machines in the cluster. If I submit the files to the single machine they work fine but when I submit them to the cluster I get this error. The hostname will change each time but the error is the same.
All of the macs can view the files and play them fine. Someone mention QT Pro. I tried adding that to a few of them but I got the same problem. It seems that there is just something about the files that it doesn't like.
Any ideas.
Ken

I've seen this error when our Xsan was configured for high data transfers. Turns out there the san was corrupting the segments, and the nodes couldn't read the segments and assemble the files. Only the node that wrote the segment could read it. After talking with Shake support, turned out setting the san to default settings fixed it.

HOST Failed errors with multi-core processing in Compressor

I used Digital Rebellion's Pref Mgr to trash all prefs; then Compressor Repair to fix them. Rebooted. Stopped Qmaster. Reset services. Established 5 instances ( I have 8 core Xeon 2.8ghz Mac Pro ). Restarted Qmaster sharing. Opened FCP file, sent to Compressor. Selected DVD settings. Chose cluster I set up in Qmaster. Submitted. Instant "HOST Failed" error messages on the five instances that appeared in Batch Monitor.
Help. Tired. Frustrated. ******.

If you really are running 10.6.2, I'd start by running all software updates.
See what happens if you export a 5 minute section of your movie, export that as a master file and bring that movie into a new Compressor job,
Post a screen shot of the Computer Sharing settings window to see whether anyone can spot something amiss.
Russ

Local host & DC error during NW04s trial installation

Hi everybody!
I am trying to install SAPNW2004sJavaSP9_Trial with setup.bat as well as the sapinst.exe file of SAP_NetWeaver_2004s_SR_1_Installation_Master_DVD__ID__NW05SR1_IM1. I tried it both with Domain user (with all the local administrator rights assigned like 'Act as part of OS' and 'Replace a process level token') as well as the local 'Administrator' account. The installation always stops when I select Next after selecting JCE policy file with the following Warnings and Errors log:
WARNING 2008-03-12 09:40:46
The install parameter INSTPARA_DB is already defined (existing value IND, new value ADA ).
WARNING 2008-03-12 09:44:01
Error 5 (Access is denied.
) in execution of a 'RegOpenKeyEx' function, line (69), with parameter (SYSTEM\CurrentControlSet\Services\McAfeeFramework).
WARNING 2008-03-12 09:44:01
The subkey 'HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\McAfeeFramework' does not exist on the 'localhost' host.
ERROR 2008-03-12 09:44:01
MOS-01185 The subkey 'HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\McAfeeFramework' does not exist on the 'localhost' host.
ERROR 2008-03-12 09:44:01
FCO-00011 The step collect with step key |NW_Java_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_GetSidNoProfiles|ind|ind|ind|ind|1|0|collect was executed with status ERROR .
Does anybody have any clue with this issue?
Suitable points await for corrective answer.
Regards,
AQ

I resolved the issue myself. Actually it was McAfee virus scan whose services were not being disabled properly which was in conflict...

Webutil form giving error "oracle.forms.webutil.* bean not found.

i have done all settings as per given in documentation of webutil.
forms is compiling but at runtime it gives error:
oracle.forms.webutil.clientinfo.getclientinfo bean not found.
what could be the reason.plz. help.
shikha...

Hi Shika,
Probably, the issue could be because of any one of the following.
<br>
<br>
1. Check whether you have added $OARCLE_HOME\forms90\java\frmwebutil.jar in the default.env under $ORACLE_HOME\Forms90\server folder.
<br>
<br>
2. Check whether you have added the virtual directory
<virtual-directory virtual-path="/webutil" real-path="$OARCLE_HOME/forms90/webutil" />
in the file orion-web.xml under $ORACLE_HOME\j2ee\DevSuite\application-deployments\forms\forms90web folder
<b<i>Correctly</i></b>
<br>
<br>
HTH.
<br>
Regards,
<br>
Arun

Webutil Host bean error

Similar Messages

Maybe you are looking for