Webutil on Application server

hi,
I installed Oracle IDS and also configured the webutil to work with it. It works fine. I also installed Oracle application server on the same and successfully tested, its working okay but not the forms using webutil.
When i run the same form which works on IDS, it gives error in the application server. WUC-015
i added
AliasMatch ^/forms90/webutil/(..*) "c:/webutil/lib/$1
in the forms90\server\forms90.conf
but still doesn't work. is there any other steps I should follow.
Can some one please help me.
Thank you
Blesson

Did you check out the common errors in the webutil FAQ. My guess is that this will be due to the application set up (maybe your PATHs and environments are different).
Also check out the Webutil Manual since it talks specifically the steps to make webutil run on the application server.
Regards
Grant Ronald
Forms Product Management

Similar Messages

Webutil with application server 10.1.2.0.2

hello for all
how i deploy webutil with application server 10.1.2.0.2

I think the question was about requirements to create and run WebCenter centric applications and portlets in general. Please correct me if I'm wrong but isn't the context of the question about reuse of an existing AS 10gR2 platform? This would only make sense if the existing platform could be used for any parts of the Webcenter application - JSF runtime and portlets. Webcenter has to be setup on a 10gR3 container so you have at least one 10gR3 instance involved - at least for the Webcenter app. So why should you have an interest to mix up your application architecture with a 10gR2 based portlet deployment
Also, if you want to use a 10gR2 container for your portlets you can only build portlets based on a 10gR2 PDK/portlet container. A 10gR3 PDK requires a 10.1.3.1 minimum release of the OC4J. Hence a 10gR2 for portlets doesn't make any sense for a Webcenter application.

Using webutil in Application Server 10g

Hi,
I just configure successfully webutil with dev. suite 10g R2.
I developed form & attached webutil lebrary with it and it is working good at form builder runtime. but when i try to run the same form on Application Server10g R2 it gives me error "FRM-40039: Cannot attach library F:\Dev10g\Forms\webutil\webutil while opening the button".
I am using Dev. suite 10g R2 on windows XP plateform & Oracle Application Server 10g R2 on windows 2003 server.
Should I configure webutil manually on Application Server or configured by default? if yes, please tell me the steps to configure webutil on application server.
With best regards.

Please can u send me the details of configuring webutil on 10G AS Rel 2 on windows 2003. But I have Developer 10g Suite and 10G AS on same server machine

Webutil on Application Server 10g 10.1.2.0.2

hi all
i have downloaded the webutil_106.zip file from OTN , version 1.0.6 .
i have done the setup ... using pdf file given by download above zip file (webutil -> doc ->web_til.pdf).
After Completion of setup I run this url in browser "http://servername/forms/frmservlet?form=web.fmx&config=webutil" iam getting below error
500 Internal Server Error
Forms Servlet Error.
Missing or invalid value for baseHTML parameter.
Please check the servlet configuration to make sure this value specifies a valid file.
Could pls anybody help to solve this problem....
Thanks.
Rag

hi Rajesh...
Its not creating any log file.
I have updated in the webutil.cfg file as mentioned below
logging.file=C:\rag.log
logging.enabled=TRUE
logging.errorsonly=TRUE
logging.connections=TRUE
And also updated in the formsweb.cfg as mentioned below
[webutil]
WebUtilArchive=frmwebutil.jar,jacob.jar #raghu
WebUtilLogging=All
WebUtilLoggingDetail=Detailed
WebUtilErrorMode=All
WebUtilDispatchMonitorInterval=5
WebUtilTrustInternal=true
WebUtilMaxTransferSize=16384
baseHTMLjinitiator=webutiljini.htm
baseHTMLjpi=webutiljpi.htm
archive_jini=frmall_jinit.jar,icons.jar
baseHTML=webutilbase.htm
archive=frmall.jar
lookAndFeel=oracle
envFile=default.env
Still it is not creating any log files.
Is there any problem in above code and also tell me any other additional setups is required.
Thanks
rag.

Problem while configuring webutil on oracle application server 10g(9.0.4)

hi,
I have configured webutil with oracle application server 10g(9.0.4).JInitiator 1.3.1.17 is installed.
I did everything according to webutil manual.Then i developed a form using developer suit 10g (9.0.4).
and successfully compiled and attached webutil library.then i subclass
webutil object group from webutil.olb into my form,that is also
subclassed successfully.Form has also been compiled and saved
successfully.
also configured my formsweb.cfg,forms90.conf,default.env according to webutil documentation.
{color:#993366}Now when i run this form from client, it does not show form in the
browser and shows a message on the client browser console as follows{color}.
{color:#0000ff}*Applet oracle.forms.webutil.common.RegisterWebUtil*
{color} {color:#993366}After this message,It does nothing and if i refresh browser,it shows following message in the browser' Console.{color}
{color:#0000ff}*Applet oracle.forms.engine.Main notinited.*{color}
Note:In the browser ,loading java applet is also visible.
how should i resolve this problem?
any suggestion?
Its urgent.
Regards,
abbasyazdani

Refer this metalink note,
566628.1 How To Install Webutil on 10g Oracle AS
[email protected]

Webutil not working properly after applying application server patch

i have applied patch Patch 5983622 my application server verion is upgrade to 10.1.2.3 .
patch is applied sucessfully but.foms which have webutil library not working.
can any one tell me what should i do for make them working again.

Do you receive any error messages in your Java Console?
We encountered to following problem when we patched the AS to 10.1.2.3:
[Exception while using WebUtil on OAS 10.1.2.3|http://www.it-eye.nl/weblog/2008/07/04/exception-while-using-webutil-on-oas-10123/]

Webutil configuration for windows 7 application server

hi all,
we are working on oracle forms/reports and recently upgraded the application server to windows 7 and database is oracle 10g
config:
os : windows 7
developer suite 10g
in this we are using the jre instead of jinitiator and did the all needful changes in formsweb.cfg. and webutil.cfg
now we can able to run forms/reports. but the problem is webutil is not working.
we are facing at run the reports as we select excel format and click ok button
the following error is coming
**oracle.forms.webutil.ole olebean not found**
any body kindly help me how to resolve this

See my comments in this post:
java.lang.ClassNotFoundException: oracle.forms.webutil.ole.OleFunctions
and this one:
webutil.cfg for win-7 64 bit client

Webutil configuration for jre, Forms 10g in windows 7 application server

hi all,
we are recently upgraded the application server with new os windows7. and clients ae also upgraded with windows7.
we are using forms 10g(developer suite 10g). and installed jre6 instead of jinitiator and did the all needful changes in formsweb.cfg. and ialready installed ofiice-2003(for excel)
but we are unable to run reports in excel format*. while we select the repotr type is exel in list item
and click ok button the following error is coming
oracle.forms.webutil.ole ole functions bean not found
client_ole2.create_obj will not work.
=====================
the following is the webutil configuration in formsweb.cfg
=====================
[webutil]
archive=frmall.jar,frmwebutil.jar,jacob.jar
archive_jini=frmall_jinit.jar,frmwebutil.jar,jacob.jar
#,f90all_jinit.jar
WebUtilArchive=frmwebutil.jar,jacob.jar
WebUtilLogging=off
WebUtilLoggingDetail=normal
WebUtilErrorMode=Alert
WebUtilDispatchMonitorInterval=5
WebUtilTrustInternal=true
WebUtilMaxTransferSize=16384
baseHTMLjinitiator=basejpi.htm
baseHTMLjpi=webutiljpi.htm
baseHTML=webutilbase.htm
#baseHTML=webutiljpi.htm
lookAndFeel=Oracle
if any changes in the configuration and jre files.please mention it.
kindly help me how to resolve this problem
thank you
Edited by: vamsi on 3 Jan, 2012 12:59 AM
Edited by: vamsi on 3 Jan, 2012 1:21 AM
Edited by: vamsi on 3 Jan, 2012 1:21 AM

See my comments in this post:
java.lang.ClassNotFoundException: oracle.forms.webutil.ole.OleFunctions
and this one:
webutil.cfg for win-7 64 bit client

How to configure webutil in oracle application server 10g (9.0.4)?

hi,
i want to configure webutil for oracle application server 10g(9.0.4).
how should i start?
i have read the webutil mannual.it is bit tricky.
i want step by step configuration.
Any sort of help is appriciateable.
Regards,
abbasyazdani

hi,
In webutil directory structure,there r four folders,
{color:#0000ff}doc
java
server
webutil{color}
and there are three files.
{color:#0000ff}webutil.pll,webutil.old and create_webutil_db
{color}
In webutil mannual,it is written that we should extract this folder to forms90.
But in forms90, there are {color:#0000ff}server and java folders.
{color:#000000}should i replace forms90's sever and java folder with webutil's server and java folder?
what should i do for this ?
regards
abbasyazdani
{color}{color}

Webutil - Application server form

We have a farm of 6 application servers for production. We are configuring the one application server which is our development environment, for web util.
1.When we go to production do we have to configure each one of the app servers in the farm with webutil configuration?
2.Will it have any impact on the existing forms which do not use webutil. Only 2 of our forms use webutil.
3.What will be the potential impact of webutil on existing forms, which do not use webutil, because we replace the basic html pages with webutil specific html pages for webutil configuration.
Thanks in advance.

Hi,
1.When we go to production do we have to configure each one of the app servers in the farm with webutil configuration?
Yes.
2.Will it have any impact on the existing forms which do not use webutil. Only 2 of our forms use webutil.
No.
3.What will be the potential impact of webutil on existing forms, which do not use webutil, because we replace the basic html pages with webutil specific html pages for webutil configuration.
The webutil.jar file might get downloaded to the client, but thats its.
Frank

Delete file on application server (Froms9iAS)

How can I delete file on application server (Froms9iAS) from client machine (file such as *.txt,*dbf). I try use old win_api_utility (from Forms6i) but it doesn't work.

Check out Webutil.
More on it in the Forms page.

How to upload file on Application Server with Forms 6i?

Please, I need to upload .csv file from local to Application Server, I think to use .jsp application, but I don't know where I had to put it...Apache can't read .jsp file without Tomcat? If I launch my .jsp file from Apache/htdocs directory can't view .jsp code (Method Not Allowed)...method is POST...any idea? Thanks in advance!

Hi,
You could write a java bean to get the file from the client and to upload to App Server. And, you simply use it in Forms 6i.
Also, you could use d2kwutil (not tried though. you could search this forum and get an idea of that).
Of course, For your information, You could use WebUtil (in Forms 10g / 10.1.2) which has the functionality.
HTH.
Regards,
Arun

How to copy a file from Client to Application Server

Hello,
My requirement is user selects a file from Browse button on oracle form - this location is on client side, and have to copy this file on Application server.
I tried using webutil_file.copy_file function but it gives error - copy_file is not a procedure or is undefined.
There is another way of Client_to_AS but it needs some changes in configuration files of webutil, which is not allowed in our scenario.
Source - client machine resident file
Target- Application server disk location
So can any one help in this regard?

Hi Francois,
Thanks for your suggestion, actually i didnt want to use Client_to_As as client doesnt want to make any changes in any configuration files, no matter how small the change is.
Anyways we are able to successfully copy the file using Client_to_AS, but one thing that i couldn't understand is why was our webutil_file.copy_file function failing?
Any hint about this?
Thanks!
Avinash.
Pune- India.

Create report output to the Client of the Application Server inst.of Server

Hi,
Please suggest the soution for the below:
We are using SET_REPORT_OBJECT_PROPERTY and WEB.SHOW_DOCUMENT to create report. Now Requirement is to save the report output to Client instead of server. I tried to use WEBUTIL but web util can be used from form only becuase that is using form item.
(1) We are calling all our report from a form. Is there any option to trigger a action when ever a report job is created in Application server (report server)
(2) Please let me now is there any option to create the output directly to client of application server 10G R1WIN , 10GR2WIN or in 11G. If yes please let me know the details.
Wtih Thanks & Regards
K.Sundar
Edited by: 870860 on Jul 13, 2011 10:27 PM

Hi,
Please suggest the soution for the below:
We are using SET_REPORT_OBJECT_PROPERTY and WEB.SHOW_DOCUMENT to create report. Now Requirement is to save the report output to Client instead of server. I tried to use WEBUTIL but web util can be used from form only becuase that is using form item.
(1) We are calling all our report from a form. Is there any option to trigger a action when ever a report job is created in Application server (report server)
(2) Please let me now is there any option to create the output directly to client of application server 10G R1WIN , 10GR2WIN or in 11G. If yes please let me know the details.
Wtih Thanks & Regards
K.Sundar
Edited by: 870860 on Jul 13, 2011 10:27 PM

Wut 118 application server file abc.prn does not exist or is of zero length

dear members,
I am printing a character mode report which gives the following error:
"wut 118 application server file c:\abc.prn does not exist or is of zero length"
my code on when-button-pressed is here:
          declare
               repid REPORT_OBJECT;
               v_rep VARCHAR2(200);
               rep_status VARCHAR2(50);
               report_name varchar2(100);
               v_path varchar2(200);
               rep_server varchar2(50);
          BEGIN
               select parameter into rep_server from mis where parameter_type = 'REPORT_SERVER';
               report_name := 'C:\TEMP\abc.prn';
               repid := find_report_object('reports');
               SET_REPORT_OBJECT_PROPERTY(repid,REPORT_FILENAME,:global.report_path||'abc123.rdf');
               SET_REPORT_OBJECT_PROPERTY(repid,REPORT_EXECUTION_MODE,BATCH);
               SET_REPORT_OBJECT_PROPERTY(repid,REPORT_COMM_MODE,SYNCHRONOUS);
               SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESTYPE,FILE);
               SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESFORMAT,:global.report_path||'dflt.prt');
               SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESNAME,report_name);
               SET_REPORT_OBJECT_PROPERTY(repid,REPORT_SERVER,REP_SERVER);
PF_FGOWGPNO='||:FG_DISPATCH_M.FGOWGPNO||' PF_FISCAL_YEAR='||:FG_DISPATCH_M.XFISCAL_YEAR||:FG_DISPATCH_M.XFISCAL_YEAR||' P_USERNAME='||:DUMMY.USER);
PF_FGOWGPNO='||:FG_DISPATCH_M.FGOWGPNO||' PF_FISCAL_YEAR='||:FG_DISPATCH_M.XFISCAL_YEAR);
               SET_REPORT_OBJECT_PROPERTY(repid,REPORT_OTHER,'paramform=no PF_FGOWGPNO='||:FG_WH_INTERCHANGE.FG_TRANSIT_ID||' PF_FISCAL_YEAR='||:FG_WH_INTERCHANGE.XFISCAL_YEAR||' PRINT_IT='||:DUMMY.PRINT_IT);
               v_rep := RUN_REPORT_OBJECT(repid);
               rep_status := REPORT_OBJECT_STATUS(v_rep);
               WHILE rep_status in ('RUNNING','OPENING_REPORT','ENQUEUED') LOOP
                    rep_status := report_object_status(v_rep);
               END LOOP;
               IF rep_status = 'FINISHED' THEN
                    --WEB.SHOW_DOCUMENT('/reports/rwservlet/getjobid'||substr(v_rep,instr(v_rep,'_',-1)+1)||'?'||'server=repsrv10g','_blank');
                    NULL;
               ELSE
                    message('Error when running report');
               END IF;
               exception
                    when others then
                    message(sqlerrm);
                    raise form_trigger_failure;
               END;
               declare
                    a boolean;
               begin
                    a := webutil_file_transfer.as_to_client('c:\temp\abc.prn','c:\temp\abc.prn');
               end;
               begin
                    client_host('cmd start /c type c:\temp\abc.prn > prn');
               exception
                    when others then null;
               end;Regards:

Disregard my last. I see what you are doing. You are using file transfer to move the file to the local machine. It was confusing because the paths are the same.
I would suggest adding a SYNCHRONIZE after the file transfer and before the attempt to print. It might even be a good idea to add some error handling code to verify that the file has been copied and can be found. This will allow you to better deal with situations where the file doesn't get written for some reason. WebUtil offers some functions to check for file existence and size.
Also, if you are using Java 7U21, this may cause some issues with your CLIENT_HOST call.

Webutil on Application server

Similar Messages

Maybe you are looking for