WebVPN dosen't work after a Windows 7 update.

Hi
Today a costumer called me with a strange problem
After a Widows 7 update two days ago all their WebVPN users could not log on.
The web browser comes with a popup with the message: This web location wants to install the following add-on: "Cisco Portforwarder Control by Cisco"
But nothing happens ?
If they remove the Windows 7 update, WebVPN works again.
Anyone there know what the problem could be and what to do to make it work ?
Best regards
Rex Petersen / Denmark.       

Hi All,
If I am not wrong, the only application that has been affected  because of the Microsoft update is clientless vpn. It is because of the Microsoft  Security update KB 2695962. For more information please visit:
http://technet.microsoft.com/en-us/security/advisory/2695962
The resolution to this can be found at:
http://tools.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-20120314-asaclient.
Though this link provide a workaround but I have not seen that working.
There are two options to make it to work:
1. Either uninstall the specified security update
or
2. Upgrade the code to  the code mentioned under Software Versions and Fixes of the link: http://tools.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-20120314-asaclient
Let me know if this works after performing these steps.
Thanks,
Vishnu Sharma

Similar Messages

  • Dvd/cd player won't work after installing windows 8.1

    I recently installed windows 8.1 on my Pavilion All in One Desktop Computer and now the computer won't recognise the DVD/CD player. I have downloaded all current drivers, but still not working. Any ideas?

    Hello Gindel95,
    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More. I have read your post on how the DVD/CD player will not work after installing Windows 8.1, and I would be happy to assist you! To begin, I will need to ask you a few questions:
    What is the Product and Model Number of your desktop computer?
    What version of Windows did you have installed on your computer before upgrading to 8.1?
    Has your computer completed all of its important Windows Updates?
    In the meantime, I recommend following this document on Download or Update Software and Drivers for HP Computers, which should help configure your DVD / CD drive.
    Please re-post with the results of your troubleshooting, as well as the requested information above. I look forward to your reply!
    Regards
    MechPilot
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

  • My sound is not working after downloading windows 10

    My sound is not working after downloading windows 10 please can you help me?

    right click start then select device manager see if there are any yellow ! in triagle symbols next to any device if there is you may need to reinstall the audio driver

  • After my windows 7 update, Thunderbird can't start correctly, how to solve?

    After my windows 7 update just now, Thunderbird can't start correctly, it says not responding.
    How can I fix this? or at the least rescue my data.

    Solved !
    this problem was caused by another application not working correctly.
    (plex media server)

  • A new user name showed up on my computer after a windows 8 update.

    A new user name showed up on my computer after a windows 8 update. A name I do not know or recognize. After the update,  the screen showed 2 users, myself and the name "John". it wasn't there yesterday, & I am the only user. I also bought the laptop new so it can't be a previous user. Can anyone tell me how to remove "John" from my computer. I am going to do a system restore & see if that works. In the meantime, if anyone has ever had this happen, what did you do?
    Spoiler (Highlight to read)
    This question was solved.
    View Solution.

    Hello Patthemech1. To remove this account, I would like you to reference this link on how to remove user accounts on Windows 8. Let me know if this assists you. I'm only here to help!
    http://answers.microsoft.com/en-us/windows/forum/windows_8-security/how-do-i-delete-user-accounts-on...
    Mario
    I worked on behalf of HP.

  • WD Mybook Thunderbolt Duo stop working after 10.9.4 update.

    WD Thunderbolt Duo stop working after 10.9.4 update.
    The drive does not show in disk Utility & WD utility, but it show at System information. Restart does not help,
    MBP 15' early 2011.

    Only thunderbolt available, check on some forum, it could be my MBP's thunderbolt port problem.
    I'm living in Malaysia, there are no apple store, only authorised seller, it will take weeks to repair... which is a big issue for me,

  • Epson printer driver no longer working after 10.4.11 update

    It seems that my original Epson driver for my Stylus Photo 750 is no longer working after my latest Tiger update. The system does recognise it but shows an exclamation mark behind it and refuses to print with it (the document stays in the waiting line forever). Reinstalling as well as repairing permissions didn´t help. Fortunately the Gimp Epson driver is still working but I have no access to my coloursync profiles with this driver.
    I know that many printer drivers need to be rewritten for Leopard (one of the reasons I didn´t update yet) but it is not understandable why problems happen with a Tiger update.
    Does anyone know a workaround?
    Thanks very much
    Wolfgang

    I just discovered a similar problem. I have an old Epson SC3000 and under 10.4.11 my computer doesn't communicate with the printer. It's an AppleTalk printer, connected via Ethernet. I tried bypassing my network switch and connected it directly to the Mac-- no go. I then rebooted into 10.3.9 and printing works fine.
    I downloaded the driver from Epson and installed it in 10.4.11. When I try to add the printer in the Printer Setup Utility, the machine just hangs-- can't force quit the utility and eventually the Finder even stops responding. It takes a hard reboot to clear up.
    I can't say whether or not printing worked in earlier versions of 10.4. I haven't been using 10.4 for very long, and I rarely use the SC3000.

  • Illustrator tools dropdown is not working after the recent software update

    My Illustrator tools dropdown is not working after the recent software update. Any help would much appreciate.

    Same problem here.  I have a Mac with a recent Yosemite update.

  • Drobo not working after 10.5.8 update

    My drobo stopped working after 10.5.8 update. Now I lost all my data on the drobo. this doesn't make me happy.

    'We are using the USB interface (as opposed to firewire) because we want to share the drive across the network - it's not always about speed.'
    This makes absolutely no sense to me.. but maybe I am wrong : Because firewire is much more reliable than USB and manages to keep highest transfer rates (without jumping up and down as USB would do as soon as I/Os go up...) Especially on a Mac ! (only for the latency I am not too sure, but I guess it is similar on fw and USB.. just increase the caching if you stream hd movies on the network...
    From my experience, sharing a USB drive on the network is probably much worse.. you can find example on the web.. (Orb, Plex and else will start drop frames when connecting to a USB shared drive.)
    I currently use my drobo plugged to my Mini with a fw800 to 400 cable,4*1.5tb hdds, I also share it on the network with gigabit ethernet, and get much better performances than any usb shared drive.
    Sorry I do not have any precize measurement, but I can upload or download a 6tb file in about 10minutes over gigabit ethernet, and I guess the bottleneck is now the Drobo controller...
    The protocol you use may have an impact as well (afp, smb,...) but whatever you use, I suppose Firewire will be faster.
    As a general advice, do not update or upgrade anything in general before you have a backup of your data, this is true for any storage system, Drobo or not.
    Oh, and Data redundancy on a raid is not a backup of course.
    Vincent
    Message was edited by: v1ncen7

  • External monitor Syncmaster 2494SW not working after 10.6.7 update

    External monitor Samsung Syncmaster 2494  SW stopped working after 10.6.7 update on 2011 MacBook Pro. I'm using miniDP-DVI adapter. The monitor shown correctly in Display Properties with right modes and name. MackBook recognizes connection but the monitor goes to PowerSave mode (LED indicator blinks).
    Safemode boot, SMC reset, PRAM reset did not help.
    Exactly the same setup works perfectly under 10.6.6.

    HERE IS THE EASY FIX SOLUTION FOR THIS PROBLEM GUYS:
    I have an 15inch MacBook Pro that I've just installed Snow Leopard 10.6.3 on.
    Prior to this install, I've had it hooked up to my Samsung SyncMaster 2243 via an Apple MDP/VGA adapter and a third party VGA cable. It has been flashing on and off a black screen every now and then for the past 2 years and I googled that it was just a crappy communication between the MBP and the Samsung... but now since installing 10.6.3, the Samsung display just flashes the desktop for a second then turns black for good - occationally flashing analogue/digtal prompt display. Tried everything for hours. Nothing worked, thought I was gonna have to buy a new all Apple VGA lead then came across Michael's above solution. Tried it and it worked IMMEDIATLY!!! And the monitor doesn't flash black anymore AT ALL!! Whoo-hoo!! Thanks heaps.
    WHAT TO DO TO FIX:
    Go to => System Preferences  => Energy Saver => change graphic settings to Higher Performace.
    Cheers!!

  • Trackpad not working after 10.8.4 update

    Macbook Pro with Retina Display late 2012. Trackpad clicking function stopped working after 10.8.4 update. Any advice? I've tried zapping the pram, resetting the smc. Nothing helps.

    Apple store genius bar appointment is the best option for a positive resolution.
    Ciao.

  • After recent windows 7 updating Adobe reader has stopped to run. Do you have solution?

    After recent windows 7 updating Adobe reader has stopped to run. Do you know solution?

    Three things to try...
    Using Windows Explorer navigate to C:\Program Files (x86)\Adobe\Reader 11.0\Reader, then double-click on Eula.exe and accept the license agreement
    Can you open Adobe Reader by itself?  If so, try disabling Protected Mode [Edit | Preferences | Security (Enhanced)].
    It could even be a malware issue; see http://helpx.adobe.com/acrobat/kb/reader-core-dll-error.html

  • Imessage doesn't work after ios 6.0 update.

    My imessage doesn't work after ios 6.0 update. The white bar fills up until just a little slicer is left and then it says message failed.

    *sliver of the white bar.

  • Home button not working after 5.0.1 update

    Ok now the home button not working after 5.0.1 update.  Anyone have any ideas?  How do I roll backfrom this update?

    This happened to me as well.  AT&T had me reset my network settings and this fixed the problem.  Here is how...
    Settings > General > Reset > Reset Network Settings
    "For now" the problem is fixed for me.

  • Satellite P200-P100 - Black screen after a Windows 7 update

    Hi,
    I have a Toshiba Satellite P200-P100 running Windows 7.
    A few weeks ago, after a Windows 7 Update, my monitor would not show any image, it would light up, but still no image. Not even the BIOS it would load.
    I fixed it by using System Restore using another monitor. The same happened again today, I must have ran the same update, but this time a system restore did not solve it, neither did reinstalling Win 7.
    Any suggestions?
    Thanks,
    Spre3

    Hi
    You mean you cannot see anything on the internal nor the external monitor even switching the display output pressing the FN + F5 buttons???
    Hmm. in my personal opinion this has nothing to do with the Win 7 update
    I mean the Win 7 OS update/installation should not affect the BIOS and you should be able to access the BIOS even if no operating system would be installed on the HDD!!!
    So I assume the whole issue could be related to the motherboard issue or some parts placed on motherboard
    Did you try this?
    Remove the battery and disconnect the AC adaptor
    Then wait a little bit (1hour) and then connect both parts again.
    Then try to power up the unit
    If this will not help then the RAM modules should be checked.

Maybe you are looking for