Weigh bridge Integration
HI
How we can PO - Good Receipt through Weighbridge ( MettlerToledo-8142 PRO ) in ABAP . without using VB program ( Visual Basic).
thanks
Thomas
Hi,
you can use the RFC HU_GET_RFC_DATA to retrieve the weight from a scale connected to the user's PC via a com (RS-232) port. You can use this RFC from a custom ABAP for the GR process or in a user-exit.
You can view sample code here [RFC HU_GET_RFC_DATA|http://www.en.pocketprograms.com/support/abapsamples.aspx] example.
Good luck !
Ian
Similar Messages
-
Integration with PLC, Weigh Bridge, Attendance Machine & Spectrometer
Dear Friends,
Can anyone help me with any knowledge on how to integrate
1) PLC
2) Weigh-Bridge
3) Attendance Machine
4) Spectrometer
with SAP System?
I have never done any integration...and looking for help.
Points assured if helpful.
Regards,
Rohan DasDear Rohan,
You need to go through the SAP xApp Manufacturing Integration and Intelligence (SAP xMII) technology, which offers a sophisticated yet easy-to-use application for aggregating, transforming, and distributing plant and production information.
Do go through some OPC (Object for Process Control) documents also.You can visit the link below to get a feel of it.
http://www.opc-to-sap.com/
Bye
Take Care
Sauvik -
Dear ABAPers,
I am in Cement Implementation Project and they asked for an interface between ERP and Weigh Bridge in SD cycle .
Kindly could anyone tell me how can i start with this task? or can anyone provide methodology for performing this interface?
ThanksDo you have a process controlling the gate, identifying the truck, and collection two weigh-tickets empty/loaded from teh weighbridge?
If so we have an integrated solution to collect all relevant documents (weigh tickets, delivery sheet, truck identification, even photo), outside SAP, and when all is complete send it as one object on-line to the SAP screen for entry validation. This way you get two important benefits: No SAP load for programming and server load, robustness.
Have a look at [SIP Ltd > solutions ISEC|http://www.sip.com.gr:8081/triboni/exec/x/gr.sip.site.display/xsl/display/displayChapter/solutions/displaySubChapter/ISEC/page/chapter.html] the Integrated Services ERP Connector does this exactly. Its a separate server communication directly with SAP. This way the whole process of weighing and making the invoice is off line, easy parametrizable, and on-line with the SD.
Hope this info helped
Spyros -
Capture Weigh Bridge Reading in ABAP Program through RS232 port
Dear SAPers,
I am in Cement Implementation Project and i have requirement to Connect Weigh Bridge to SAP ERP and capture the readings of that Weigh Bridge in ABAP program.
How can i capture those readings in ABAP program or save them in a Z table using RS232 port????
Best Regards,
Kholoud
Moderator message: please do not cross-post.
Edited by: Thomas Zloch on Mar 17, 2011 1:22 PMDear Vijay,
I'm having the same problem in my implementation, the client needs me to capture the readings from Weigh Bridge through RS232 port directly to ABAP program.
Could please tell me how did you solve this??
Thanks
Kholoud -
We want to read data from weigh bridge and display in oracle forms & store
Sir/Madam,
in our organisation we had one requirement. i.e is reading data from weigh bridge using serial port, displying that data in oracle forms and when ever user click save button we store that into my oracle database. we are using oracle 8i and forms 6i and windows OS environment. we don't know reading data from serial port and placing that into form items. please help me as early as possible if there is any property available in d2k regarding this requirement .
thank you,
vishnuThere's no property in Forms that makes you read serial ports, but as far as I know you need to know the API of the machine which you want to read data from (it should come with machine's manual) and then it will be easy to store it in forms item.
Tony -
Hi SAPERS,
Please provide me the information about how to connect the vehicle weigh bridge system to SAP system to get automatic net weight should be populates at the time of GR. Is there any interface is required for it.
Thanks in Advance,
Durga Prasadhi
u have to create gate module with helpof ur abapers
like for inward movement there will be a T code
and for out ward there will be another and u will get diffrence which will be use fo gr
in same frist t code u can proide the gate pass system
what u can do is create a new table for in ward movement and another table for outward
then link them for two t codes for in ward an out ward movement
do t code one for truck+load
then t code 2 truck
so u will get the diff
then do gr for the diff
while doing t code one u can develope some thing for the gate pass like trcuk no or cahllan no etc
just discuss this with ur developer hewill do it
LECI aslo can be use for the in and out pass
regards
kunal -
Weighing Scale integration with SAP ( Packing Station)
Hi All,
We need to have our Weighing Scales integrated with SAP to capture the READINGS for parcels / cartons / shipments automatically.
I observe there is a provision for maintaining RFC connection , Scale Checkbox etc in SPRO--->Logistics Exec ---> Packing --->Set profile for packing w.r.t HUPAST tcode ...
Would you plz help me with some work-arounds ...???
Regards
JamnaHi Folks,
There is XMI technology available that can be potentially leveraged for this type of requirements in integrating any electronic gadgets talking to SAP ....
I think SAP XMI will be vry useful for this.
XMI is having ability to capture real time data from other system and update accordingly.
It has have connectors which will capture values from other system and pull in SAP.
How to Integrage Weigh Scale with OPC server via xMII 12.0
Hello Experts,
I am new to xMII. We want to integrate shop floor weigh scale into SAP PI Sheet to read the value from weight scale into PI Sheet. We have the infrastructure Ohaus weigh scale, xMII 12.0, SAP ERP 4.70, Kepware OPC Server, installed xMII framework for UDS and UDS 4.0. We are able to integrate the OPC Data tags into SAP PI Sheet successfully. But we need help to integrate weight scale with OPC server to read the scale value into OPC data tag.
Can any one give the steps to integrate weight scale with OPC server?
with best regards
K. Mohan Reddy
I know someone who have developed few applications on integrating weighing machines with R/3.
By: | 04 Dec 2008
i am working as a ABAPer in my company and developed DLL in VB6 on integrating weighing machines with R/3.
implemented and working in more than 10 sites.
By: | 12 Dec 2008
ERP-Scale from Pocket Programs provides a standardized u201Cplug & playu201D interface for weighing equipment. It is SAP Certified and can be used for integration of weigh-scales with the SAP Packing Station transaction (HUPAST) or with custom ABAP developments. Major international companies are already gaining benefit by implementing ERP-Scale in their plants worldwide.
By: | 04 Feb 2009
Re: Custom development for UDS
What have to say folks about the possibilities with the above ? But shouldnt SAP have some standard FM / RFC / BAPI owefully facilitating the same???
But the available FM HU_GET_RFC_DATA doesnt have any documentations attached to it ?
Regards
Jamna -
Reading Weight from Weigh Bridge....
Hi.
The scenario here is that we have to create module pool for picking up
the weights of trucks from weigh bridge ( AVERY brand ).
The existing system is in foxpro . Please find attached the text of AVERY guidance which exhaustively shows how the fox system is reading the
weight from the port, to which the weigh bridge is attached, on the
system kept at the location.
I wish to have the info regarding how, this functionality can be
achieved in ABAP as my perception is that this is not a simple
execution / run of an external program.
regards,
Suman
TEXT
getwt.prg
sample weight recieving program for Avery CTH
this is demo program for getting weight from the CTH
using the CALL and LOAD commands of dBASE III PLUS only.
This demo program demonstrates the use of LOAD and CALL commands
of dBASE III PLUS to get the weight from the CTH. The actual
program to get the weight is a file called GETCTH.BIN
To use GETCTH.BIN directly do the following:
1. Start dBASE III PLUS normally.
2. Type the command - LOAD GETCTH at the dot prompt of dBASE III PLUS.
(Be sure to give the correct drive and/or directory where the
file GETCTH.BIN resides in your computer system).
3. The program GETCTH.BIN will return the weight in a variable
passed from dBASE III PLUS, so first initialize a variable in
dBASE III PLUS to recieve the weight.
The weight string returned by the CTH is 26 charecters long so
define a variable of length 26 by typing the following command
at the dot prompt:
WEIGHT = "ABCDEFGHIJKLMNOPQRSTUVWXYZ" { Any dummy value }
or
WEIGHT = "2BCDEFGHIJKLMNOPQRSTUVWXYZ" for COM2 port
( Note -> The choice for the name of the above variable is
purely arbitrary. Any name could have been chosen)
4. Next type the following command at the dot prompt to call the
GETCTH function :
CALL GETCTH WITH WEIGHT
5. After some time the dot prompt will return. At the dot prompt
type the following :
? WEIGHT
If the GETCTH function has been successfull in getting the weight
from the CTH then this function will return the weight as a string
of 26 charecters containing the weight and other information.
Otherwise, if the function is not successfull then the value of
the variable passed will be set to 26 spaces. The major reason
for the failure of the function will be a timeout error i.e.
the CTH did not respond after a preset time interval had elasped.
The returning of 26 spaces makes it easy for a dBASE III PLUS
program to retry the weighing operation if failure is detected.
The use of this in a loop till the function succeeds in getting
a weight is illustrated below in the program.
The weight returned by the CTH consists of a string of 26 charecters
A sample weight that could be returned is reproduced below:
ABCDEFGHIJKLMNOPQRSTUVWXYZ
19600 kg G 000016 O
The following is the sequence of charecters :
1. The first two charecters ( positions A - B above ) are
space charecters.
2. The next five charecters ( positions C - G above ) is the
weight from the CTH - ( 19600 in this case).
3. The next charecter ( position H above ) is a space charecter.
4. The next two charecters ( positions I - J above ) are the weight
units - ( kg in this case ).
5. The next four charecters ( positions K - N above ) are space
space charecters.
6. The next charecter ( position O above ) specifies mode of
operation. It shows 'G' for Gross mode and 'T' for Tare
mode of operation.
7. The next charecter ( position P above ) is a space charecter.
8. The next six charecters ( positions Q - V above ) is the
consecutive number which is unique for each weighing.
9. The next charecter ( position W above ) is a space charecter.
10. The next charecter ( position X above ) is the machine ID number.
11. The last two charecters ( positions Y - Z above ) are
Carriage return and Line feed charecters.
Clear the screen and show the copyright notice.
clear
@ 0, 0 TO 23, 79 DOUBLE
@ 3, 1 TO 3, 78
@ 11, 25 TO 18, 57
set color to w/n+
@ 1, 26 SAY "A V E R Y I N D I A L I M I T E D"
set color to
set color to n/w+
@ 2, 10 SAY " Demo program for getting weight from Avery weight digitiser - CTH "
set color to
set color to w/n+
@ 6, 3 SAY "(C) Avery India Ltd.- 1989,1990 All rights reserved."
@ 8, 10 SAY "The source code of this program is for pure demo purposes and all"
@ 9, 10 SAY "copyright of this demo program and its source rests with"
@ 10, 10 SAY "Avery India Ltd."
@ 20, 10 SAY "This program and its accompaining source code cannot be used"
@ 21, 10 SAY "without the prior permission of Avery India Ltd."
set color to
set color to n/w+
@ 17,26 say " Press any key to continue... "
set color to
wait ""
@ 4,0 clear to 23,79
@ 0,0 to 19,79 double
WEIGHT = space(26) && define a variable to get the weight
load getcth && load the module from disk
&& this assumes that the file GETCTH.BIN
&& is in the current drive/directory.
&& If not, use drive specifier.
do while weight = space(26) && the main loop
call getcth with weight
enddo
set color to w/n+
As explained above the last two charecters of the weight string
are the Carriage return (CR) and the Line feed (LF) charecters
out of the total of 26 charecters of the weight string. So to get
the whole weight string other than these last two chareceters we
can use the SUBSTR command of dBASE III PLUS as follows :-
@ 14,20 say "The weight is : " + substr(weight,1,24)
This will show the whole weight string on the screen i.e. all
24 charecters ( it will not show the CR and the LF charecters ).
The CR and the LF charecters are as it is unprintable charecters
and will show up as control charecters if printed on the screen.
If the whole weight string is not required and only, say, the
weight and the weight units are required, then the following command
could be used :-
@ 14,20 say "The weight is : " + substr(weight,1,10)
This will show the weight value and the weight units (this substring
will include the embedded space charecters in this susbtring).
Similarly, other parameters from the weight string could be
incorporated, if required, from the whole string to enhance
the weighing process on the computer.
The idea of putting the CALL statement above in a loop is that
sometimes due to unavoidable reasons, there may some garbage
charecters on the serial port. Thus it may be necessary to flush these
charecters from the port by CALLing the function again.
Sometimes, the function may return without a timeout error but the
variable may contain some control charecters which do not make sense.
In this case the function should called repeatedly till the proper
charecters are returned. This occurs due to the reason explained
above.
@ 14,20 say "The weight is : " + substr(weight,1,24)
set color to
set color to n/w+
@ 16,5 say "Please read the README.DOC file on this disk for more information"
release module getcth && release module from memory
set color to
Please refer to the dBASE III PLUS manuals for a
complete discussion on the LOAD, CALL and RELEASE
commands.
Message was edited by: Suman TyagiThanks, but I've already seen this thread and done the steps described on it.
Actually, my question is very specific... How to populate the fields LinkVal and LinkUnit of the registry...
I read all the threads here in SDN and they don't answer my question...
I'd be glad if someone had already done tcode HUPAST works for Filizola...
Tks again. -
How to interface the Weigh Bridge System with ABAP thru' RS232 PORT
Hi Gurus,
Can any one guide me how to interface the Weigh Bridge System with ABAP thru' RS232 PORT. I think we have to use the BAPI. What is the name of the BAPI.
I have to capture the GROSS WEIGHT, TARE WEIGHT. can any one give me the code for that.
Goodwill
Jacob charlesHi Jacob,
<b>You can integrate Weigh Bridge with SAP ABAP .
I have done this for one of our projects
The technology used in RFC SDK and DCOM Connector.
Refer to this link
SAP Business One SDK Version 2005 [original link is broken]
Search here for sap software distribution center link
https://websmp203.sap-ag.de/~form/handler?_APP=00200682500000001943&_EVENT=SEARCH&HIDE=&SEARCH_SPAT=X&SEARCH_BPAT=X&SEARCH_CD=X&SEARCH_P=X&SEARCH_PV=X&SEARCH_C=X&SEARCH_CV=X&SEARCH_TA=&SEARCH_V=&HIDE_EXPERT_SEARCH=X&SEARCH_MAX_RESULT=20
http://msdn.microsoft.com/library/default.asp?url=/library/en-us/dndcom/html/sapintegration.asp
http://www.intelligententerprise.com/channels/applications/feature/archive/homann.jhtml;jsessionid=BR44S4YLZ0HSGQSNDLOSKHSCJUNN2JVN?_requestid=505707
www.sapgenie.com/sapgenie/docs/SAP%20Connectors.doc
help.sap.com/printdocu/core/ Print46c/en/data/pdf/BCMIDDCOM/BCMIDDCOM.pdf</b>
Good Luck and thanks
AK -
Can we link GR [Receipt Quantity field] to weighing bridge to compy the Wt.
Dear Experts,
I have the requirement In Goods Receipt -
Material Quantity is to be copied Automatically at Good receipt quantity field from the weighing bridge digital meter.
Is it possible to link
if it is possible, please explain how to link?
which tools we have to use in SAP?
please brief me on the my requirement.
Thanks in AdvanceHi,
It is possible to link.
SAP has a command program that is setup and linked with the weigh bridge application.
The program pushes data to R/3. -
Interfacing of weigh bridge to SAP system
hi guy's,
our client receiving the raw material by the trucks, so they required the interfacing the weigh bridge to std SAP system. plz light on this scenario,
thanks in advance
mohan.mHi,
Hope your scenario is that you are ordering raw material from a vendor and transporting the raw material ,you have a transport vendor.Once the raw material unloaded in the factory,immediately you have to pay to the transport vendor(Truck) and later based on the payment term you will pay the payment to your raw material vendor.
1.Create material: MM01,
2.Create Raw material Vendor: XK01,
3.Create Transport Vendor: XK01,
4.For Aumatic Pricing Create Calculation Schema and mataioning the Condition type for Material price,Discount, Taxes and Freight chages .
5.Create PO(ME21N) Ordering material to Raw Material Vendor and come to Condition Details.In the Condition Details , select Frieght Condition type and assign to Fright Vendor.
6.Now Go for Goods Receipt with MIGO with Movement type101
7.Now immediately you have to pay to Feieght Vendor, so do Invoice Verification For Fright Vendor.Go to T.Code: MIRO and Select planned Deliver Cost and do the Invoice Veification.
8.Now go to T.Code:F-53 and pay to Fright Vendor,
9.Later you can go Invoice verification for raw material for selecting Goods/Service item
10.F-53: pay to raw material Vendor.
Hope the above will be helpful.
If helpful then reward and close the thread.
Regards,
Biju K -
Hi All,
We are receiving raw materials in bulk(No of delivery for single PO) in trucks. Its weighed at weigh bridge. How can enter the GR qty and truck details in SAP sytem. Same truck wil be weighed after unloading the raw materials.
How can it be mapped in SAP please. Points will be provided immediately.
Thanks.hi
u discuss it with ur abap person he will explain it to u
what u can do is create a new table for in ward movement and another table for outward
then link them for two t codes for in ward an out ward movement
do t code one for truck+load
then t code 2 truck
so u will get the diff
then do gr gor the diff
while doing t code one u can develope some thing for the gate pass like trcuk no or cahllan no etc
just discuss this with ur developer hewill do it
regards
kunal -
Dear Gurus,
Can anybody provide me any document explaining the requirements for procurement of raw materials through weigh bridge. In short the weigh bridge scenario has to be incorporated in SAP. Please help.
Thanks,
KumarHi,
The requirement is to get the weight of material directly into SAP and then use the weight data of respective materials to post goods receipt, production booking and dispatch documents right.
i.e. we have to integrate the Weigh bridge at the time of GR.
Please go thorugh following link for more details.
http://www.sapnet.ru/viewtopic.php?t=578
Thanks,
AMIT -
Connection Microsoft Dynamics Nav to a weigh bridge machine
I want to read data from a digital weigh bridge from Navision anyone out there with a solution.
You can use web-services in NAV for it. If you need details, try on Dynamics Community forum: https://community.dynamics.com/nav/f/34.aspx
-
hi
A Single weigh bridge will serve for Multiple Shipping Points, Two types of wigh bridge are avilable Type-A and Type-B.
if weighment is happening from Type-A Per Tonne Rs 25 will be charged extra, for Type-B no extra charges.
while creating Sales Order itself weigh bridge will be decided.
how to map this plz guide me
Prasadyes this is possibble ,we need interface to connect waybridge with SAP
Maybe you are looking for
-
Creation of Services for MSS 1.41
Good Night. Someone can help me with a suggestion of the cause of the isssue that i attach . [Link Documentation|http://www.box.net/files#/files/0/f/39331722] In the file i explain my issue. Any help is highly appreciated. Regards
-
Unable to register database in RMAN - RedHat 6.2 + Oracle 8.1.6
Is this a bug?? pls suggest the way out... -Balaji ([email protected]) 1. Create rman Tablespace ============================= create tablespace TS_RMAN datafile '/u01/orauser/oradata/mydb/TS_RMAN.dbf' size 5M autoextend on; 2. Create rman user =====
-
Menu buttons at the end of movie instead of at beginning?
I created a movie in iMovie, shared it to create a DVD in iDVD, but no matter what I do, the menu and scene selection buttons end up at the end of the Movie, instead of at the beginning. The DVD starts playing immediately when inserted in a DVD play
-
JCreator, or NetBeans, I have been using JCreator up to this point and it works well, but what is everyones opinion on the better program. Thanks for any response.
-
Automator doubling my Spotlight comment text
I made a simple workflow to add text to the Spotlight comments field using "Get Selected Finder Items" and "Set Spotlight Comments for Finder Items" but when I use it, the text I enter is entered twice in the Spotlight field. What am I doing wrong he