Weird dial assist behavior with ATT VoLTE on iPhone 6

I have international outbound dialing enabled on my ATT line.
Ever since I got my new iPhone 6 (that defaults to Voice over LTE on ATT), none of the international phone numbers I have saved that are prefixed with "+" or a "00" work. I always get an ATT recording "Please check the number and try again"
One possible fix I've found is going into Settings --> Cellular --> choose 'Data only (vs Voice and Data).
This is potentially a major issue because the standard prefix for international numbers is a "+"
This seems like an issue with ATT VoLTE and/or the iPhone 6.
Has anyone else encountered this?

I Had the same problem after I updated to iOS 8.1.1. The 8.1.1 update defaults the LTE setting to voice and data. It was driving me crazy since all my foreign contacts are programed in with +. ATT nor Apple did not knew about the issue when I called on Dec 1. After noticing that LTE indication was off when Dial Assist did work, I change the LTE setting to data only and it is now working fine. I did leave a voice mail with the Senior Apple Technical Support Advisor that was assisting me with this fix. I am surprised that other people have not called them with this issue.
Wished I had seen your post before I restored iOS 8.1.1.

Similar Messages

Do I get rebate if I sign 2year contract with ATT and buy iphone 4?

Do I get rebate if I sign 2year contract with ATT and buy iphone 4?

Yes - on the sales price for the iPhone 4.
AT&T's fully subsidized price is $199 for the 16GB and $299 for the 32GB plus applicable sales tax.
AT&T's full retail sales price if $599 for the 16GB and $699 for the 32GB plus applicable sales tax.
A $400 difference.

Weird external drive behavior with Time Machine....

I have a 500 GB WD My Essentials USB hard drive. I've been using on Lion for 6+ months. I have the drive in 2 partitions, 400 GB for Time Machine and 100 GB for storage. Everything has been working fine for 6+ months. As of yeterday when I plug in my WD drive, the storage partition will mount on the desktop but the 400 GB Time Machine partition will not. The TM partion does show in the disk utility but cannot be repaired. I'm wondering why the problem is only with the Time Machine partition.
Any ideas?

Oh, the drive will not "eject" properly either. When I try to eject it the storage partion turns light in color but it still shows on the desktop and is still listed in the Finder side menu (but you can't access or see the actual drive).

HT1386 Can you assist me with sync from my iphone to pc? I want my data to merge, but contacts and calendar are not updating

Where are the settings to merge data (calendar and contacts) when syncing phone to pc?

Hello Mary,
It is definitely inconvenient when your contacts are not syning over correctly. If you are using iTunes to sync Outlook to your iPhone, I recommend the following article to troubleshoot the issue:
iPhone, iPad, iPod touch: Troubleshooting contact and calendar syncing via USB on Windows
http://support.apple.com/kb/HT1692
Thank you for using Apple Support Communities.
Best,
Sheila M.

Can't get dial assist to work on iPhone 6

I can't get the dial assist feature on the iPhone 6+ to work. Checked the forums but can't find anything. Ideas? Anyone? Anyone? Bueller?

See this thread. Weird dial assist behavior with ATT VoLTE on iPhone 6

Compatibility with ATT MicroCell

I have just been given an ATT MicroCell (by ATT) to atone for atrocious service and nearly non-existant service to our house (iPhone gets on bar or less and has many dropped calls etc)
I have tried to get the MicroCell to work following the standard instructions (configuration option A), but it does not work. I am considering installing it as Option C, "Priority Mode Configuration" which installs it between my dsl modem and my time capsule.
What I need to know is if this will interfere with my backups (I have 3 computers backing up wirelessly to my TC)?
Does anyone have much experience with MicroCell and Time Capsule??
Thanks!

Yes, that's the manual I have been using. Today I called for support and got the message that my activation was not complete--though it had been done by the staff at the ATT store. So they walked me through set up again, and again, after my ONE FREE "quickstart support" call is used and I had to wait 90 minutes, it still does not work.
Only yesterday I was able to get a GPS lock and today I have not, though the unit is still right in the same window.
After reading some MicroCell community discussions, I begin to suspect this is entirely a problem on the ATT side of the problem---not with my hardware or set up, though I have read about lots of tweaking of DHCP and NAT settings and the like---and these are not things I have any computer savvy with.
I really appreciate the website you linked to---though I note that it has many trouble shooting pages for many different routers---but none for Airport. You would think that with ATTs success selling iPhones they would have better support for Apple.

Weird behavior with Ctrl-Tab

Dear members,
(Forms 6i c/s)
I have two tab canvases in one form. For each one, the first tab page is a master list, and the second one is a single-record detail block.
I try to prevent the user from going to the second tab page if the list is empty, so I check the cursor-block in the When-Tab-Page-Changed trigger.
It works fine when I use the mouse, but I get a different behavior with the Ctrl-Tab keys:
In the first canvas, when WTPC trigger fires, the cursor-block is the list block, which is fine.
But in the other canvas, the cursor-block is already the detail block as soon as the trigger fires.
I don't understand where the difference comes from, and I don't really know where to search.
Does anyone have a clue ?
Thanks for your help.

I don't, since my code has to be generic (it's the same for both canvases, and many more).
And I can only get the name of a canvas from a block, not the name of a block from a canvas.
That's why the cursor-block was the best solution.

I am unable to dial India toll free numbers from my iphone, these numbers are like 1800-***-1515. There is nothing as dial assist in Ios7.1.1 which i can disable and dial in india toll free numbers.Please respond if anyone has any solution

I am unable to dial India toll free numbers from my iphone, these numbers are like 1800-***-1515. There is nothing as dial assist in Ios7.1.1 which i can disable and dial in india toll free numbers.Please respond if anyone has any solution

Check this post, the dial assist is part of the iOS 7.1, according to page 49 of the iphone_user_guide
Make calls to your contacts and favorites while traveling abroad. (GSM) Go to Settings > Phone and turn on Dial Assist. Dial Assist automatically adds the prefix or country code for calls to the U.S.
This user had a similar problem and solved it by switching off the dial assist feature in Settings/Phone/Dial Assist
Re: How to save toll free no starts with 1800?

Strange window behavior with CS5

I have begun experiencing strange behavior with PS CS5. I should begun with the machine configuration: 2.66GHz iMac (8,1) Intel Core Duo with 4GB RAM and OSX 10.6.6, Radeon HD 2600 Pro graphics card. The initial symptom showed up suddenly as an inability to display an image window; that is, I could open PS normally, everything would show up properly, but when I opened an image file of any sort, there would be no image window. Other cues indicated that the file was open; for example, the window menu would show it selected, and the layers palette would show the file's layers.
It did not seem to matter what type of file was involved: PSD, JPG, TIF, whatever. Occasionally, this behavior would begin during a session. Sometimes it would happen right off the bat. Sometimes, stopping and restarting PS seemed to clean things up; other times, this had no effect. After messing around quite a bit with different permutations and combinations, all I could say was that the problem was random.
I might add that I've had PS CS5 on this machine pretty much since it was announced, and had not had problems with it before. So this issue came along quite suddenly a couple of weeks ago. This was a little after I'd installed an update for Nik's Viveza 2; and I began to suspect that. Although why Viveza should do such a strange thing was odd, and Viveza was never part of the files I was experiencing issues with. Anyway, I went back to an earlier version of Viveza and the problem persisted.
Since I run Time Machine, I also went back to versions of the entire PS folder from a month back, and found the same problem. Along the way, I experimented with the files I was using with PS CS4 & CS3, which I also have installed on this machine. These two versions of PS run perfectly well. At least the CS4 version has precisely the same plugins as the CS5 folder, and this seems to discount the potential problem with plugins.
To be sure about CS5, I completely deactivated, deinstalled, and reinstalled it. The same issues occurred. Now, I have to admit that I let PS run its update process so that I brought it back to the most recent version in this step of my troubleshooting. So, I can't be certain that the issue isn't with some update of CS5.
I might add that I have been running CS5 in 32-bit mode, for compatibility with certain plugins. This may or may not be an issue, since I have limited experience with running in 64-bit mode. At this point, I should add a bit more about the confusing behavior.
While messing around with CS5, I also suspected the GPU support, since my problem had to do with windows. When the problem presents itself, the usual cycle through window views that you get by pressing the "F" key seems to get messed up. In particular, the "F" key doesn't work at all. Next, if you use the View menu to select different views, the full screen with menu bar view will often have garbled pixels, while the full screen view will show a blank grey screen. Then, cycling back to a window view will show a window with blank grey contents. This is interesting since the starting point was no window at all; but going into full screen and then back will produce a window with bogus contents.
Now, the next strange thing, having to do with the GPU, is that CS5 often fails to recognize the Radeon HD 2600 card. Oddly enough, it did originally. And I had it running in Basic mode. However, CS4 does recognize the GPU; and I can set it in any variety of modes: Basic, Normal, and Advanced. This behavior is not consistent at all either; that is, while CS5 almost always now fails to detect the GPU, sometimes it does. As near as I can tell, this failure to detect the card does not depend upon whether I start CS5 in 32-bit or 64-bit mode. OTOH, CS4 always recognizes the GPU.
Another form of this odd behavior arises if I start CS5 cold, and then just open a new blank window. This almost always works. I get a blank white window, and I can paint on it with a brush, etc. However, if I go ahead at this point and open a file, then the new file takes over the window; and there are no tabs. If I select the original new file, usually labelled "Untitled", the window bar will show the change of filename but the window's contents and the layers palette will continue to show the old file that I had opened. Cycling through views can sometimes get back to the new Untitled file, but just selecting file windows never works.
Yet another aspect of this messed up window behavior is that the workspace bar, which shows the Bridge, MiniBridge and view icons on the upper left and the various workspace options and CS Live on the upper right, is present but blank. OTOH, the tool bar is always displayed correctly, as is the horizontal bar that shows the various tool options. Likewise, the palettes for the workspace such as layers, swatches, adjustments, and so on, are always correctly displayed on the left.
My next steps in trying to figure this out will be to ensure that I am running the latest of all plugins so that I can get everything running in 64-bit mode and try this again. However, the single factor that seems consistent in this whole mess is that whenever I do find this odd behavior, the performance preferences window will indicate that CS5 is not detecting the GPU. Whenever this happens, if I open up CS4 and check the same performance preference in it, the GPU is detected. I can have the two preference windows side by side on the screen in fact, CS4 sees the GPU and CS5 does not. The counter-indication is that sometimes CS5 will work properly and the preferences window still shows that the GPU has not been detected. Having said that, I can add that if I have opened up CS5, and it has found the GPU, and I have set it into, say, Basic mode, and then later found CS5 messing up, and I go back and check the performance preferences again, the GPU has always been lost. So, CS5 can mess up windows with or without the GPU detected and active; but when if it started with the GPU present, it will show up as lost after the weird behavior starts.
To add one more observation, I have had Macs and other computers with failing GPUs. This computer is showing none of the typical signs of that. Every other program seems to be working just fine, and I have a lot of these, many graphics intensive; e.g., Corel Painter 11, Parallels v6 running Windows 7, PS CS4, Lightroom v3, Aperture v3, and so on. It is just CS5 that is messing up.
I could load up this message with screen shots of all this nonsense, but I'm not sure what that would add to the strange tale, other than I'm not pulling your legs. I am, however, pulling out my own hair.
As I stated before, this began quite suddenly a couple of weeks ago, early Feb 2011. My best guess as to cause is some combination of incompatible updates between CS5, OSX, and maybe some plugin or other. I found unusual behavior with onOne's FocalPoint v2 last year after Apple updated GPU drivers in some OSX update, and cratered that program. It took onOne a month or two to fix that. I have CS5 on a laptop with the same OSX version, and on that I haven't seen these issues; but then, I haven't been using it as intensely over there. Also, that machine has different CPU and GPU models than this iMac.
So, to the community: is anybody else starting to see this odd stuff? Am I alone?

Here's the reason I say that the same plugins exist for both CS4 & CS5. Sometime last year, the internal hard drive on this computer died (as they so often do), and it was replaced under the Apple care warranty. As a consequence, I decided to rebuild the OS and applications from scratch and bring back my user files from backup. I among other things, I reinstalled all of CS4 as well as CS5 (and I had to put CS3 back too for reasons having to do with printing calibration images for Quad Tone RIP). Then, I went to reinstall the plugins that I needed. I use Nik Software, onOne, Portrait Professional and various Topaz plugins. To my recollection, most of these install in PS CS3, CS4, CS5, Aperture, and Lightroom. In short, it is not that I've copied or moved plugin folders from one application folder to another, just that the installers automatically detect the presence of the various applications and put the various plugins into each, as appropriate.
The only 32-bit plugins that I have that don't fit into this category are from Vincent Versace. He provides special versions of certain Nik plugins (Tonal Contrast, Contrast Only, etc) that function with some Acme Educational extensions for performing B&W conversion, sharpening, blah blah blah. These plugins are only 32-bit and the extensions are only CS5 compatible. I've installed these ones only into CS5; so, you've got me. OTOH, I've had these from Vincent as soon as CS5 was available; and they've worked so far without problems. Perhaps I should just edit the extensions so I could use the latest plugins direct from Nik instead of the Versace special editions...
I've checked fonts and repaired permissions. I am presently going through the rather tedious process of disabling plugins and extensions to see if anything yields consistent results. The rather random arrival of the strangeness makes ensuring that a change is really having an effect more difficult to validate, as you will appreciate.
I apologize for my long-winded original post. I add all of the detail so that anyone who'd experienced similar strange behaviors might properly pattern-match what they were seeing. On the one hand, in finding the cause of a problem, you look for what's changed; and theoretically nothing is new. On the other hand, there's always so much changing behind the scenes with automatic updates of this, that, and the other thing that it's impossible to make the claim that nothing's new.

I am unable to complete Synching with my IPhone 4S as it tells me reason is that Apps are unable to be determined on my phone however all of them Purchased from I Tunes. Can someone assist me with a Solution

I am unable to complete Synching with my IPhone 4S as it tells me reason is that Apps are unable to be determined on my phone however all of them Purchased from I Tunes. Can someone assist me with a Solution

You can't merge accounts. But you can check your purchase history:
iTunes Store & Mac App Store: Seeing your purchase history and order numbers
http://support.apple.com/kb/HT2727
Also, what may seem stupid to you... may be a protection of privacy to others.

Erratic Report Region Behavior with Dynamic SQL Queries

I'm running HTMLDB v 1.5.1.00.12 and I've noticed some odd behavior with report regions using dynamic SQL queries. Every so often, our testers will run a page containing a dynamic sql report region and get the following error, (despite the fact the query was working only moments ago and no other developer has touched it):
ORA-06502: PL/SQL: numeric or value error: character string buffer too small
or sometimes
failed to parse SQL query:ORA-01403: no data found
The only solution I've found so far is to:
1) Make a copy of the failed report region.
2) Disable or delete the original failed report region.
The new copy of the report region runs without issue.
My search of the forums turned up the following two threads, but neither provided me with a clear explanation of the cause, and how to avoid it:
ORA-06502:PL/SQL: numeric or value error: character string buffer too small
Re: Import Export Error (ORA-06502)
The columns being returned are below the 4000 character limit, and the rows being returned are far less than 32k in size.
Could this have anything to do with the way HTMLDB is internally storing the PL/SQL used to generate the dynamic SQL Query? Is there any known issue related to this with that version of HTMLDB?
This problem occurs without any discernable pattern or consistency, making it hard to determine where I should focus my efforts in tracking down the cause.

Hi all,
My report seems to be behaving correctly once i set it to "Use Generic Column Names (parse query at runtime only)" :)
Cheers,
Joel

Compatible issues firefox v37.0.2 with att yahoo mail

6:43 PM 4/24/2015
Compatible issues firefox v37.0.2 with att yahoo mail
Hello: this is my first post,hope I am doing it properly.
I am using W7pro OS and ATT DSL 3.0Mbps dl
I noticed this week that I was unable to save attachments from my ATT Yahoo mail I could view them but no choice as to ware to save them--only choice (save to my comp.)But no ware to be found.
I reinstalled v 36.0.4-preventing auto upgrade-But still had same problem.
At this point contacted ATT support supervisor-we spent about 4hr working on problem--He was using your v 31.5.0--and had no problem accessing and saving attachments using remolt access on my comp.
We also found using my comp.FF v 36.0.4 & v 37.0.2 browser,that we could without any problems access an save attachments--AOL mail-- & mail2web.--& IE--Even when forwarding inaccessible mail to above sites.
He informed me that (ATT mail Yahoo)only uses resources to make them compatible with--Google IE & Chrome &Apple? (basically he was saying,that they would NOT commit resources to FF--any version)BUT he was not allowed to commit.
PS: The last time I know it worked ok was 3-18-15 I have 3 comp.2 wxp pro 1 w7 pro the same problem on all 3--so feel confident not OS related-but compatible problems with FF & yahoo mail.
The ATT support supervisor-was unable to determined the date they may have made changes on their site.without extensive research-which we decided wasn't worth the effort as they wouldn't look in to it.
I hope someone or FF will be able find a workaround-as I do not want to use the browsers they suggest. I LOVE FF.
Thank You Gary

I have no idea what you are asking me to do ??--can you explain at a dummy
level--I wont be offended.
gary

Will Apple help us with ATT rate hikes? Who do I contact?

Just a few months ago - and at the time I entered into my 2 year contract - unlimited textings was avaialble for less that 5 dollars more. But that is now gone and what has taken its place is just Dick Channey crazy!
Wasnt the whole point of APPLE insisting that phone plans all come with unlimited internet so that this would encourage the owners to fully integrate the iphone in to their daily lives? Does having huge rate increases in texting help that cause ?
MY QUESTION TO APPLE and its user forums - WHO do I contact at apple or at ATT for help on this issue??
Thats what I want in a nutshell. If you want, I can tell ya more.
Harry
iphone, ipod and shuffle owner
MORE is this...........................
I do understand the nature of big business and partnerships etc.
I do understand that Apple would like to not be involved in disputes between ATT and its customers.
I GET THAT. But can Apple help me anyway just for the reason that I WANT TO KEEP MY IPHONE?!?!?
ATT has implemented monsterous rate hikes and LIMITATIONS on package combinations so that iphone users will pay as much or more for Texting than they do for unlimited internet.
We had to live with unlimited internet not including unlimited texting. OK fine, thats how it was when we signed up and you have to take it or leave it. But now with the new changes in rates - here is what the iphone user has as their options.
200 included texts for free
or
$5 - get 200 more - 400 texts total
or
THE NEXT OPTION - $20 MORE, for not unlimited but 1500 texts.
Does having to keep an eye on your text totals or paying at least $85 / month sound like the vision that apple wanted for the iphone users?
if it doesnt, WILL YOU HELP US?

I didnt forget that - its I dont know that statement to be true.
I have been with ATT since Cingular and I've had internet,text and MMS combo packages for some time now; that Includes shopping around for the right phone and plans combo. And I know for a fact that there were MANY combos of unlimited and they were FAR from 50 bucks.
There certainly might be a webpage or two with some ancient pricing plans offered. And I am sure that any one of those would be superceeded by another new price offer on the same plan.
so I didnt forget that; I knew it to be not on point.

HT4623 can someone assist me with a solution to the problem with my iphone 5. I upgraded to IOS 6.1.4 and since then i have had the problem of No Sim. I restored to the factory settings using i tunes as i have my back up on my pc but still the same proble

can someone assist me with a solution to the problem with my iphone 5. I upgraded to IOS 6.1.4 and since then i have had the problem of No Sim. I restored to the factory settings using i tunes as i have my back up on my pc but still the same problem. I have swapped sim and my Sim is working on other iphone with ios 6.1.3

Try a new SIM from your carrier. If that doesn't work, make a Genius Bar appointment and get your phone evaluated.

Can I use my I-phone with 220 volt with only a plug in prong adapter or do I need a voltage converter?

can I use my I-phone with 220 volt (China) with only a prong adapter, or do I need a votlage converter as well. Unit purchased and used in USA.

The iPhone charger is a world charger, no voltage converter needed. All you might need is a plug adapter, but that's it. Your charger will work fine & no worries about frying your phone as suggested by the orther poster who has no idea what he/she is talking about.

Weird dial assist behavior with ATT VoLTE on iPhone 6

Similar Messages

Maybe you are looking for