Weird problem in alv

friends,
i have this weird problem, i am using the below code,
the code is working fine in the debugging, but when run it is only showing the topofpage, which contains all the input parameters, there are several input parametrs, so it takes more than a page,
where-in if i comment out the EVE[] in the alv mode,
it is finely showing the display, but the input parameters, which constitute the topofpage, is not displayed,
any clues please.
thank you.

hi sanjana,
top-of-page may be like top_of_page not like top-of-page.
here i am using the events with a simple report .
check it ....
*& Report ZPR_02
REPORT ZPR_02.
TYPE-POOLS: SLIS.
TABLES: MARA.
DATA: BEGIN OF IT_MARA OCCURS 0,
        MATNR LIKE MARA-MATNR,
        MTART LIKE MARA-MTART,
        MATKL LIKE MARA-MATKL,
      END OF IT_MARA.
DATA: IT_FIELD_CAT TYPE SLIS_T_FIELDCAT_ALV,
      WA_FIELD_CAT TYPE SLIS_FIELDCAT_ALV,
      IT_EVENTS TYPE SLIS_T_EVENT,
      WA_EVENTS TYPE SLIS_ALV_EVENT,
      IT_HEADER TYPE SLIS_T_LISTHEADER,
      WA_HEADER TYPE SLIS_LISTHEADER.
SELECT-OPTIONS: S_MATNR FOR MARA-MATNR.
START-OF-SELECTION.
PERFORM GET_DATA.
PERFORM BUILD_FIELD_CAT.
PERFORM GET_EVENTS.
PERFORM DISPLAY_DATA.
*&      Form get_data
      text
FORM GET_DATA .
SELECT MATNR
         MTART
         MATKL
         FROM MARA
         INTO TABLE IT_MARA
         WHERE MATNR IN S_MATNR.
ENDFORM.                    " get_data
*&      Form build_field_cat
      text
FORM BUILD_FIELD_CAT .
CLEAR WA_FIELD_CAT.
WA_FIELD_CAT-COL_POS = 1.
WA_FIELD_CAT-FIELDNAME = 'MATNR'.
WA_FIELD_CAT-SELTEXT_L = 'Material Number'.
APPEND WA_FIELD_CAT TO IT_FIELD_CAT.
WA_FIELD_CAT-COL_POS = 2.
WA_FIELD_CAT-FIELDNAME = 'MTART'.
WA_FIELD_CAT-SELTEXT_L = 'Material Type'.
APPEND WA_FIELD_CAT TO IT_FIELD_CAT.
WA_FIELD_CAT-COL_POS = 3.
WA_FIELD_CAT-FIELDNAME = 'MATKL'.
WA_FIELD_CAT-SELTEXT_L = 'Material Group'.
APPEND WA_FIELD_CAT TO IT_FIELD_CAT.
ENDFORM.                    " build_field_cat
*&      Form display_data
      text
FORM DISPLAY_DATA .
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
    EXPORTING
      I_CALLBACK_PROGRAM = SY-REPID
      IT_FIELDCAT        = IT_FIELD_CAT
      IT_EVENTS          = IT_EVENTS
    TABLES
      T_OUTTAB           = IT_MARA.
ENDFORM.                    " display_data
*&      Form get_events
      text
FORM GET_EVENTS .
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
EXPORTING
I_LIST_TYPE           = 0
   IMPORTING
     ET_EVENTS             = IT_EVENTS .
READ TABLE IT_EVENTS INTO WA_EVENTS
                       WITH KEY NAME = SLIS_EV_TOP_OF_PAGE.
IF SY-SUBRC = 0.
    WA_EVENTS-FORM = 'TOP_OF_PAGE'.
    MODIFY IT_EVENTS FROM WA_EVENTS INDEX SY-TABIX.
ENDIF.
ENDFORM.                    " get_events
*&      Form top_of_page
      text
FORM TOP_OF_PAGE.
WA_HEADER-TYP = 'H'.
WA_HEADER-INFO = 'Material Data'.
APPEND WA_HEADER TO IT_HEADER.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
    EXPORTING
      IT_LIST_COMMENTARY       = IT_HEADER
     I_LOGO                   = I_LOGO
     I_END_OF_LIST_GRID       = I_END_OF_LIST_GRID
     I_ALV_FORM               = I_ALV_FORM
ENDFORM. "top_of_page
reward points if useful,
venkat.

Similar Messages

Weird problem when downloading the output to an excel sheet

Hi to all,
when i download the list, output by an alv grid, i observe a weird problem..in the excel sheet the last digit (10th digit) of the first col. which is delivery no., is getting truncated...0001802563 is getting downloaded as 000180256..couldn't understand why...when i use conversion_exit fm, the values are not getting truncated and downloading correctly...curious to know what's gone wrong in this funcationality? thanks all
cheers,
Shankar. M.

actually the problem is in the field catalog.if u can send me the code, i shall bug fix it for u.

Concatenate problem in ALV

Hi All,
I have this weird problem of concatentation on ALV grid. I am writing following code.
CONCATENATE ' ' lv_property_l_name into lv_property_l_name.
the spaces arent getting concatenated.
I even tried:
CONCATENATE SPACE lv_property_l_name into lv_property_l_name.
regards
Puru

Hi,
Use this.
CONCATENATE SPACE lv_property_l_name into lv_property_l_name
SEPARATED BY space.
OR
Shift lv_property_l_name by 1 places right.
Rgds,
Prakash

Problem in ALV report

Hi Friends,
I have the following 2 problems in ALV report
1) Logo is not getting displayed in the report.
2) When i click on the Purchase order number in the report the interactive report is not working,i am not able to see report of First interactive level.
can you help it out friends.
Thanks and regards
Dinesh
REPORT YSDBALV1
tables: ekko , ekpo .
type-pools: slis .
Table for Display Header
data:i_header type slis_t_listheader with header line.
*Fieldcat Declaration
data:fieldcatalog type slis_T_fieldcat_alv WITH HEADER LINE.
*Table of Events
data:i_event type slis_t_event with header line .
For Layout
data:i_layout type slis_layout_alv .
data: text(30) .
*Internal Table Declaration
data: begin of it_final occurs 0 ,
      ebeln like ekko-ebeln ,           "Purchasing Document No.
      bedat like ekko-bedat ,           "Purchasing Document Date
      matnr like ekpo-matnr ,           "Material No.
      netwr like ekpo-netwr ,         "Net Order Value in PO Currancy
      meins like ekpo-meins ,           "UOM
      chk(1) ,
      light(1) ,
      change like ekpo-menge ,
      end of it_final .
**select option Declaration
selection-screen begin of block block.
select-options: s_ebeln for ekko-ebeln .
selection-screen end of block block .
selection-screen begin of block block1 .
parameters:grid radiobutton group r .
parameters:list radiobutton group r .
selection-screen end of block block1 .
at selection screen
at selection-screen .
select single * from ekko where ebeln in s_ebeln .
if sy-subrc <> 0 .
   message e000(8I) WITH 'No Data Exists' .
endif .
start-of-selection .
if grid = 'X' .
perform get_data .
perform event using i_event[] .
perform field using fieldcatalog[] .
perform layout using i_layout .
perform grid_display .
endif .
*&      Form get_data
      text
--> p1        text
<-- p2        text
form get_data .
*DATA Retrieval from tables
SELECT EKKO~EBELN
       EKKO~BEDAT
       EKPO~EBELP
       EKPO~MATNR
       EKPO~NETWR
       EKPO~MEINS
       EKPO~MENGE
       EKPO~BPRME
       INTO CORRESPONDING FIELDS OF table IT_FINAL
       FROM EKKO INNER JOIN EKPO ON EKKOEBELN = EKPOEBELN
       WHERE EKKO~EBELN IN S_EBELN.
       APPEND IT_FINAL.
endform.                    " get_data
*Getting the Event for Top of Page display.
*&      Form event
      text
     -->P_I_event[] text
form event using    p_i_event type slis_t_event.
clear p_i_event .
refresh p_i_event .
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
EXPORTING
   I_LIST_TYPE           = 0
   IMPORTING
     ET_EVENTS             = p_i_event
EXCEPTIONS
   LIST_TYPE_WRONG       = 1
   OTHERS                = 2
read table p_i_event with key name = slis_ev_top_of_page into i_event.
      if sy-subrc = 0.
             move 'TOP_OF_PAGE_PO' to i_event-form.
             modify p_i_event from i_event index sy-tabix transporting form.
      endif.
      clear i_event.
endform.                    " event
*Display Top-of Page Details and Logo
form top_of_page_po .
       clear i_header .
       refresh i_header .
       write sy-datum to text.
       i_header-typ = 'H'.
       i_header-info = 'PURCHASE OREDER DETAILS'.
       append i_header.
      *Logo Display
      CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
             EXPORTING
                 it_list_commentary       = i_header[]
                 I_LOGO                   = 'ENJOYSAPLOGO'.
endform .
*Field Catalog Append
*&      Form field
      text
     -->P_fieldCATALOG[] text
form field using p_fieldcatalog type slis_t_fieldcat_alv.
     clear fieldcatalog.
      fieldcatalog-fieldname   = 'EBELN'.
      fieldcatalog-seltext_m   = 'Purchase Order No'.
      fieldcatalog-col_pos     = 1.
      append fieldcatalog .
      clear fieldcatalog.
      fieldcatalog-fieldname   = 'BEDAT'.
      fieldcatalog-seltext_m   = 'PO Date'.
      fieldcatalog-col_pos     = 2.
      append fieldcatalog .
      clear fieldcatalog.
      fieldcatalog-fieldname   = 'MATNR'.
      fieldcatalog-seltext_m   = 'Material No'.
      fieldcatalog-col_pos     = 4.
      fieldcatalog-outputlen   = 20.
      append fieldcatalog .
      clear fieldcatalog.
      fieldcatalog-fieldname   = 'NETWR'.
      fieldcatalog-seltext_m   = 'Net Value '.
      fieldcatalog-col_pos     = 5.
      fieldcatalog-outputlen   = 20.
      fieldcatalog-do_sum = 'X'.
      append fieldcatalog .
      clear fieldcatalog.
      fieldcatalog-fieldname   = 'MEINS'.
      fieldcatalog-seltext_m   = 'Units'.
      fieldcatalog-col_pos     = 6.
      fieldcatalog-outputlen   = 4.
      append fieldcatalog .
      clear fieldcatalog.
endform.                    " field
*&      Form layout
      text
form layout using    p_i_layout TYPE SLIS_LAYOUT_ALV .
i_layout-zebra = 'X'.
    i_layout-lights_fieldname = 'LIGHT'.
    i_layout-lights_tabname = 'IT_FINAL'.
    i_layout-box_fieldname = 'CHK'.
    i_layout-box_tabname = 'IT_FINAL'.
    i_layout-edit = ' '.
endform.
*To display Buttons in the MENU BAR if needed
FORM SET_PO_PF_STATUS USING P_I_EXTAB TYPE
                 SLIS_T_EXTAB.
                 SET PF-STATUS 'MENUPO'.
ENDFORM.
*Event for Interactive display of ALV report
form USER_COMMAND using r_ucomm like sy-ucomm
                         rs_selfield type slis_selfield .
if r_ucomm = '&IC1'.
READ TABLE IT_FINAL index   rs_selfield-tabindex.
write:/ IT_FINAL-ebeln.
endif.
endform .
*Parameters of FM REUSE_ALV_GRID_DISPLAY
*&      Form grid_display
      text
--> p1        text
<-- p2        text
form grid_display .
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
    I_CALLBACK_PROGRAM                = SY-REPID
   I_CALLBACK_PF_STATUS_SET          = 'SET_PO_PF_STATUS'
    I_CALLBACK_USER_COMMAND           = 'USER_COMMAND'
    IS_LAYOUT                         = I_LAYOUT
    IT_FIELDCAT                       = FIELDCATALOG[]
    IT_EVENTS                         = I_EVENT[]
TABLES
    t_outtab                          = IT_FINAL.
endform.                    " grid_display

*& Report YSDBALV1
REPORT YSDBALV1.
tables: ekko , ekpo .
type-pools: slis .
Table for Display Header
data:i_header type slis_t_listheader with header line.
*Fieldcat Declaration
data:fieldcatalog type slis_T_fieldcat_alv WITH HEADER LINE.
*Table of Events
data:i_event type slis_t_event with header line ,
     wa_event type line of slis_t_event.
For Layout
data:i_layout type slis_layout_alv .
data: text(30) .
*Internal Table Declaration
data: begin of it_final occurs 0 ,
ebeln like ekko-ebeln , "Purchasing Document No.
bedat like ekko-bedat , "Purchasing Document Date
matnr like ekpo-matnr , "Material No.
netwr like ekpo-netwr , "Net Order Value in PO Currancy
meins like ekpo-meins , "UOM
chk(1) ,
light(1) ,
change like ekpo-menge ,
end of it_final .
**select option Declaration
selection-screen begin of block block.
select-options: s_ebeln for ekko-ebeln .
selection-screen end of block block .
selection-screen begin of block block1 .
parameters:grid radiobutton group r .
parameters:list radiobutton group r .
selection-screen end of block block1 .
at selection screen
at selection-screen .
select single * from ekko where ebeln in s_ebeln .
if sy-subrc <> 0 .
message e000(8I) WITH 'No Data Exists' .
endif .
start-of-selection .
if grid = 'X' .
perform get_data .
perform event using i_event[] .
perform field using fieldcatalog[] .
perform layout using i_layout .
perform grid_display .
endif .
*& Form get_data
text
--> p1 text
<-- p2 text
form get_data .
*DATA Retrieval from tables
SELECT EKKO~EBELN
EKKO~BEDAT
EKPO~EBELP
EKPO~MATNR
EKPO~NETWR
EKPO~MEINS
EKPO~MENGE
EKPO~BPRME
INTO CORRESPONDING FIELDS OF table IT_FINAL
FROM EKKO INNER JOIN EKPO ON EKKOEBELN = EKPOEBELN
WHERE EKKO~EBELN IN S_EBELN.
APPEND IT_FINAL.
endform. " get_data
*Getting the Event for Top of Page display.
*& Form event
text
-->P_I_event[] text
form event using p_i_event type slis_t_event.
clear p_i_event .
refresh p_i_event .
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
EXPORTING
I_LIST_TYPE = 0
IMPORTING
ET_EVENTS = p_i_event.
EXCEPTIONS
LIST_TYPE_WRONG = 1
OTHERS = 2.
read table p_i_event with key name = slis_ev_top_of_page into wa_event.
if sy-subrc = 0.
move 'TOP_OF_PAGE_PO' to i_event-form.
modify p_i_event from i_event index sy-tabix transporting form.
endif.
clear i_event.
endform. " event
*Display Top-of Page Details and Logo
form top_of_page_po .
clear i_header .
refresh i_header .
write sy-datum to text.
i_header-typ = 'H'.
i_header-info = 'PURCHASE OREDER DETAILS'.
append i_header.
*Logo Display
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
it_list_commentary = i_header[]
I_LOGO = 'ENJOYSAP_LOGO'.
endform .
*Field Catalog Append
*& Form field
text
-->P_fieldCATALOG[] text
form field using p_fieldcatalog type slis_t_fieldcat_alv.
clear fieldcatalog.
fieldcatalog-fieldname = 'EBELN'.
fieldcatalog-seltext_m = 'Purchase Order No'.
fieldcatalog-col_pos = 1.
append fieldcatalog .
clear fieldcatalog.
fieldcatalog-fieldname = 'BEDAT'.
fieldcatalog-seltext_m = 'PO Date'.
fieldcatalog-col_pos = 2.
append fieldcatalog .
clear fieldcatalog.
fieldcatalog-fieldname = 'MATNR'.
fieldcatalog-seltext_m = 'Material No'.
fieldcatalog-col_pos = 4.
fieldcatalog-outputlen = 20.
append fieldcatalog .
clear fieldcatalog.
fieldcatalog-fieldname = 'NETWR'.
fieldcatalog-seltext_m = 'Net Value '.
fieldcatalog-col_pos = 5.
fieldcatalog-outputlen = 20.
fieldcatalog-do_sum = 'X'.
append fieldcatalog .
clear fieldcatalog.
fieldcatalog-fieldname = 'MEINS'.
fieldcatalog-seltext_m = 'Units'.
fieldcatalog-col_pos = 6.
fieldcatalog-outputlen = 4.
append fieldcatalog .
clear fieldcatalog.
endform. " field
*& Form layout
text
form layout using p_i_layout TYPE SLIS_LAYOUT_ALV .
i_layout-zebra = 'X'.
i_layout-lights_fieldname = 'LIGHT'.
i_layout-lights_tabname = 'IT_FINAL'.
i_layout-box_fieldname = 'CHK'.
i_layout-box_tabname = 'IT_FINAL'.
i_layout-edit = ' '.
endform.
*To display Buttons in the MENU BAR if needed
FORM SET_PO_PF_STATUS USING P_I_EXTAB TYPE
SLIS_T_EXTAB.
SET PF-STATUS 'MENUPO'.
ENDFORM.
*Event for Interactive display of ALV report
form USER_COMMAND using r_ucomm like sy-ucomm
rs_selfield type slis_selfield .
if r_ucomm = '&IC1'.
READ TABLE IT_FINAL index rs_selfield-tabindex.
set parameter id 'VL1' field it_final-ebeln.
call transaction 'ME23N'.
endif.
endform .
*Parameters of FM REUSE_ALV_GRID_DISPLAY
*& Form grid_display
text
--> p1 text
<-- p2 text
form grid_display .
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = SY-REPID
I_CALLBACK_PF_STATUS_SET = 'SET_PO_PF_STATUS'
I_CALLBACK_USER_COMMAND = 'USER_COMMAND'
IS_LAYOUT = I_LAYOUT
IT_FIELDCAT = FIELDCATALOG[]
IT_EVENTS = I_EVENT[]
TABLES
t_outtab = IT_FINAL.
endform. " grid_display
Regards,
Rusidar S.

Apple Banned me, because of a very weird problem with my "Factory Unlocked"

Hi Everybody! Im having a very weird problem with my unlocked iphone 4.
First of all, i would like to apologize because of my english, is not very good. My native language is Spanish.
Well.. Im from Mexico, and here we can buy the iphone Unlocked on the Apple Online Store.
Here's my problem. Apple has exchanged my iphone 3 times.
I returned the iphone the first time because the screen was totally yellowish, other than that everything was working great!, that was by the end of September.
On October 20th, i recieved my second iphone, and then a bigger problem started .
Before i continue, let me give you this information: here in Mexico we have basically 3 cell phone companies
1.- Telcel
2.- Movistar
3.- Unefon
OK, now on october 20th, i recieved my second iphone, and then procced to activate via itunes using my UNEFON sim card (microsim).
And every time i tried to activate it, only got this message onscreen:
http://i148.photobucket.com/albums/s2/jorgelomeli/Screenshot2010-10-29at24915PM. png
I though something was wrong with my brand new factory unlocked iphone 4.
I have 4 more simcards from my brothers (they all had iphone 4 too)
I tried telcel sim card, and i could activate my iphone. Then i insterted the Movistar microsim, and it worked too!! But then when i put the Unefon sim, the itunes logo inmediatly appears on the screen asking to activate on itunes, and when i tried that, the only response i got was the image above saying " The Simcard inserted on this iphone does not appear to be supported"
Weird thing here is, that, when i put my Unefon sim card on my brothers iphone 4, it worked great! on all of them, internet 3g, phone, wireless , evrything!
I called apple support, and they exchange the iphone for another one.
I recieved the third iphone on October 29. Last friday. and guess what? SAME PROBLEM! different serial number, same week production (week 42) but exactly the same message on itunes.
Very, very frustrated, i called apple again, and after 1 hour with thechnical support, they told me " We are sorry, but we can only offer you, your money back, NO MORE EXCHANGES FOR YOU"
I said why?... i dont want my money back! i want an UNLOCKED iphone!, but they refuse to give me another iphone.
When i asked techincal support, why my unefon sim card worked great on all three of my brothers iphone but not on mine, he just told me, "I really dont know, i guess they just got lucky" ****, this answer put all my trust i had on apple products for years, right on the garbage.
Since they refused to give me another iphone, i accepted my money back, and inmediatly after i finished the call, i asked my brother to buy me one more time an iphone 4 using his name, and his credit card. Now i have to wait until November 8-12 to recieve my new iphone, hoping this time i get a REAL UNLOCKED iphone, and not a partially unlocked iphone.
btw. i even went to Unefon costumer service and bought a new prepiad line, with a new microsim, just to be 100% sure that this problem is not because of the sim. And again didnt worked on my iphone, but it worked on any of my brothers iphone4.
Serial numbers of the 3 iphones:
79039C0U* (this one worked great with Unefon, only problem was yellow screen)
85042GR4*
81042FJB*
What do you suggest me? any info would be really aprecciated
FYI i also restore 4 times the last iphone and nothing seemed to work, i use 3 different computers, Macbook Pro, iMac, and an Hp with Windows 7, and the same message on all three computers.
Wierd thing also, one of my brothers bougth an iphone 4 this last week too, but he bought the 16Gb not the 32Gb. His iphone production week is 42 also! and when i put my Unefon sim in his iphone works great!
I dont know what else i can do, I just need to have faith that my new iphone coming this november will be real unlocked, but what if i'll recieve an iphone and then the same problem?? time for android? just kidding really guys, what can i do? anyone with similar problem like me? i dont wanna use Telcel or Movistar, i wanna use Unefon, and thats why i bought an Unlocked iphone
btw: jailbreak is not a solution for me, because i always like to use legal software on all my apple products, and because of the warranty.

According to http://support.apple.com/kb/HT1937, there are two official carriers in Mexico (Movistar and Telcel) and neither carrier offers an unlocked phone.

Iphone 4, having a weird problem /: can't seem to fix it!

So i have been having my iphone for a while, i have no warranty on the phone now. I have this weird problem that when i scoll down my messages and stuff i can see the outline of the message kind of show rainbowish colors that sort of show a bit when i scroll, right near the border of the message. its kind of annoying at times, also there are times when i press the home button, right when i get to my wallpaper, the outline of the letters when i text are there like very very faint, they disappear after for a while but then come back sort of like a glitch, and i cant fix it at all. then i would see faint horizontal lines, i would notice them when i use the camera, they disappear also. can anyone help me with this or suggest something?

Screen lag is normaly the LCD itself. But try restoring the iPhone. http://support.apple.com/kb/HT1414

Hiya, I've got a weird problem with my iPhone4. On the 'home page' of my iPhone the mail symbol tells me there's a new mail waiting for me. However, there's no new mail to be found. Does anyone know what the problem is? Thanks

Hiya, I've got a weird problem with my iPhone4. On the 'home page' of my iPhone the mail symbol tells me there's a new mail waiting for me. However, there's no new mail to be found. Does anyone know what the problem is? Thanks

This response is a little late as I just read about your problem. I have a 2012 Dodge Charger and a 2012 Chrysler Town and Country and both worked flawlessly with the iPhone 5s my wife and I had. However, we just upgraded to the iPhone 6 and Uconnect will receive calls but you cannot answer them. You can callout successfully, however. the annoyance being the inability to answer incoming calls in the HandsFree mode.

SAP GUI 7.10p15 weird problem on FB70

Hi all,
We upgraded SAP GUI 7.10 to patch level 15 from patch level 14 using the install server on our Windows XP machines. A weird problem seems to appear since then on FB70. You press once or twice the ENTER key, without filling any field on the screen and the GUI stays on a busy state forever (trying to constantly redraw the screen as to show an error message on missing account number). It results to 100% CPU usage on the client (Windows XP machines, tried on Windows 7 also with same result) and seems to also stress the SAP system a bit. The only way to stop that behavior is to use the Windows task manager and kill the busy window. I have not seen this behavior before and can't reproduce it in any other transaction until now.
I got access on a machine that was still on patch level 14 and works just fine. I did the upgrade and the same behaviour (busy, 100% CPU) instantly appears. Oddly enough, this behavior does not occur if I run FB70 throught the debugger (/h) in any case.
Have you seen something like this or do you have any clue why that weird behavior might appear?
Thank you very much in advance for any insight

Hello Artemios,
Yes, this seems to be a know issue with Patch 15. Please open a ticket on BC-FES-GUI to get a fix for that or wait until Patch 16 is released.
Kind regards,
Martin

Weird problem involving my external hard drive - help please!

I recently got a formac mini 120 gb firewire hard drive, which had been working fine with my g4 quicksliver.
i then went to a friends (g5 machine) with my drive and he put some data on it - bought it back to mine and managed to re connect the drive and take the data - no problem - very happy.
I recently gave my drive to another friend using a g5 and when it came back, nothing - i don't get the drive symbol appearing. turned the comp on and off many times and tried re-connecting etc still no drive appearing.
Then i took the drive to my friend with a mac lap top power book. connected there - working fine. Baffling. was happy that my data can still be accessed.
I know it's not the firewire cable because i can get power to the drive - i can see the red light at the fron on.
Can anyone help with this weird problem?
Thanks

Thought you could use this info about getting FireWire to work!
First, you should always Repair Permissions in Disk Utility before and after any update; I would do that now. If you installed your update with FireWire plugged in, your Mac may not recognize it anymore.
Try resetting your FireWire ports by disconnecting all FW devices, shut down your Mac and unplug it from AC power (wall socket) for 30 minutes. plug it back in and try FW.
If that did'nt work, download the combo update from this site (yours may be corrupt), not Software Update, disconnect all firewire + USB devices except keyboard + mouse, Repair Permissions, re-install update, Repair Permissions again + try. Yours might be the 10.4.10 Combo update. I have no idea since you did not fill out your specs. fully when you signed in to this site. Others reading, download the Combo that applies to your system. This link is for PPC Macs not Intel Macs.
If that still did'nt get it Zap the PRAM. While restarting Mac hold down the following key combo Command-Option-P-R. Keep holding those keys down till you hear the second start-up chime, then release.
For those of you with Macs that are not PowerBooks or iBooks, a bad internal battery can cause FireWire to not be recognized, so make sure it's good! Also, here is Apple doc.#88338 on getting FireWire to work.
Good Luck!
Cheers!
DALE

I have a problem with ALV Grid User Command?

Hi Experts,
I have a problem with ALV GRID User Command.
I am calling TCODE IW33 (Order Display) from the ALV output at first time by selecting an order. But, User command is calling IW33 Initial screen with blank value of order. Even I checked in debugging the value what I selected is passing properly, but once that screen (IW33 Initial) displays, value doesn't appear. Then, Manually, I created another session and gone to TCODE IW33 and displayed an order. After that I came out from that order. Then again run my ALV program and selected another order, now order is displaying, but not what I selected current order instead of displaying previous order what I just displayed manually. If I selected any other order, system will display the same order what I dislayed manually.
Here is my code.
FORM user_command_alv USING u_ucomm TYPE sy-ucomm
                       us_self_field TYPE slis_selfield.
CASE u_ucomm.
WHEN '&IC1'.
READ TABLE it_final INDEX us_self_field-tabindex INTO wa_final.
        WHEN 'ORDER'.
          IF NOT wa_final-order IS INITIAL.
            SET PARAMETER ID 'COK' FIELD wa_final-order.
            CALL TRANSACTION 'IW33' AND SKIP FIRST SCREEN.
          ENDIF.
endform.
PARAMETER ID 'COK' also the standard one.
Could you please help me out, Where I did wrong?
If I select any order, that order only should display.
Thanks in advance.
Regards,
Sarayu.
Code Formatted by: Alvaro Tejada Galindo on Jan 8, 2009 2:33 PM

hi,
Please check it once the Paramater ID is 'ANR' for IW33 order number.
Hope this may help.
Regards,
Sravanthi

Problem with ALV grid in edit mode

Hello, gurus!
I have a problem with ALV-grid. Sometimes when I call F4 help for a cell, data is inserted in a different cell. And when I call check_changed_data method, my internal table (passed to ALV-control in set_table_for_first_display) does not updates properly. In what can be a problem?
Thanks,
Mikhail

Hi Prabhu,
MODULE pbo_100 OUTPUT.
SET PF-STATUS 'MAIN100'.
title_of_report = text-010.
SET TITLEBAR '0100' WITH title_of_report.
DATA: g_event_receiver TYPE REF TO lcl_event_handler.
IF z_custom_container IS INITIAL .
    CREATE OBJECT z_custom_container
      EXPORTING
        container_name = 'ALV_ZAC'.
    CREATE OBJECT alv_grid
      EXPORTING
        i_parent = z_custom_container.
    g_repid = sy-repid.
    gs_variant-report = g_repid.
    x_save = 'A'.
    PERFORM check_alv_grid_fields.
    ps_layout-cwidth_opt = 'X'.
    ps_layout-edit = 'X'.
    CALL METHOD alv_grid->set_ready_for_input
      EXPORTING
        i_ready_for_input = '1'.
*    CALL METHOD alv_grid->register_edit_event
*      EXPORTING
*        i_event_id = cl_gui_alv_grid=>mc_evt_enter.
    APPEND   s_list_rec   to it_list_rec.
    CALL METHOD alv_grid->set_table_for_first_display
      EXPORTING
        is_layout       = ps_layout
        is_variant      = gs_variant
        i_save          = x_save
      CHANGING
        it_fieldcatalog = pt_fieldcat
        it_outtab       = it_list_rec[].
    CALL METHOD alv_grid->register_edit_event
      EXPORTING
        i_event_id = cl_gui_alv_grid=>mc_evt_enter.
    CALL METHOD alv_grid->register_edit_event
      EXPORTING
        i_event_id = cl_gui_alv_grid=>mc_evt_modified.
ENDIF.
FORM check_alv_grid_fields .
DATA: ls_fcat LIKE LINE OF pt_fieldcat.
REFRESH pt_fieldcat .
CLEAR: ps_layout, ls_fcat.
ls_fcat-fieldname = 'VBELN'.
ls_fcat-ref_field = 'VBELN'. ls_fcat-ref_table = 'LIPS'. " .
ls_fcat-outputlen = 9.
* ls_fcat-datatype   = 'CHAR'.
* ls_fcat-inttype    = 'C'.
APPEND ls_fcat TO pt_fieldcat.
CLEAR: ls_fcat.
ls_fcat-fieldname = 'ERDAT'.
ls_fcat-ref_field = 'ERDAT'. ls_fcat-ref_table = 'LIPS'.
ls_fcat-outputlen = 9.
* ls_fcat-f4availabl = 'X' .
* ls_fcat-datatype   = 'DATS'.
* ls_fcat-inttype    = 'D'.
APPEND ls_fcat TO pt_fieldcat.
CLEAR: ls_fcat.
ENDFORM.                    " check_alv_grid_fields
FORM save_p .
CLEAR l_valid.
CALL METHOD alv_grid->check_changed_data
    IMPORTING
      e_valid = l_valid.
IF l_valid IS INITIAL.
    CALL FUNCTION 'POPUP_TO_INFORM'
      EXPORTING
        titel = text-i01
        txt1 = text-i02
        txt2 = text-i03
        txt3 = text-i04.
ELSE.
    i_dat_reg = zrumm_prr-cdprr.
    CLEAR is_temp_otc.
    freshit i_prrpus_fax.
    freshit i_list2_ot.
    LOOP AT it_list_rec INTO s_list_rec.
      MOVE-CORRESPONDING s_list_rec TO i_list2_ot.
      i_list2_ot-fgrup = 'RECE'.
      i_list2_ot-prrnu = i_num_prr.
      APPEND i_list2_ot.
      MOVE-CORRESPONDING s_list_rec TO i_prrpus_fax.
      APPEND i_prrpus_fax.
    ENDLOOP.
ENDIF.
Edited by: Mikhail Sarychev on Mar 16, 2011 6:41 AM
Edited by: Mikhail Sarychev on Mar 16, 2011 6:49 AM
Edited by: Mikhail Sarychev on Mar 16, 2011 6:49 AM

Weird problem when executing an update statement

Please help me out with this issue. This a very weird problem i'm facing while executing the following update statement.
update tblo.S_TABLE c
SET (ACCNT_NAME, ACCNT_LOC)
=
(select NAME, LOC from S_TABLE1 p
where p.ROW_ID = c.ACCNT_ID)
where ROW_ID = 'XXXXX'
The statement executes perfectly fine in "SQL Plus" but when i try from my application or any SQL Tool that uses ODBC, it fails with the following error
<eb1>ORA-00923: FROM keyword not found where expected
State:S1000,Native:923,Origin:[Oracle][ODBC][Ora]</eb1>
ODBC Driver Used: 9.2.0.2.0

Yes this could most probably be resolved by upgrading the driver. I'hv tried MS Oracle ODBC driver but that is even more problematic!
The applications works fine in another environment which uses a Merant ODBC driver. Thanks for your time and advice.

Background task problem with alv grid display

Hello !
I have a problem when executing my program in background.
In foreground I have no problem, my ALV appears. In the background I have a dump.
The current ABAP program "SAPLKKBL" had to be terminated because one of the statements could not be executed.
I use the function module 'REUSE_ALV_GRID_DISPLAY'
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
     EXPORTING
        i_callback_program      = gd_repid
        i_callback_user_command = 'F533_USER_COMMAND'
        is_layout               = gd_layout
        it_fieldcat             = fieldcatalog[]
        it_special_groups       = i_fgroup[]
        i_save                  = 'X'
        it_sort                 = gd_sort
        i_buffer_active         = ' '
        i_callback_pf_status_set = 'F534_SET_PF_STATUS'
     TABLES
        t_outtab                = mytab
     EXCEPTIONS
        program_error           = 1
        OTHERS                  = 2.
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
I don't understand where the problem is. Please help me.
Thank you.

I love replying to old threads:
Try this link
http://scn.sap.com/people/prashant.patil12/blog/2007/02/20/displaying-alv-grid-in-background-job

Weird problem with JApplet

I'm having a weird problem with JApplet. So first I create an Applet with this code
public class japp extends JApplet {
     public void init() {
          Container content=getContentPane();
          JButton jb=new JButton("Hello");
          content.add(jb);
}and with this in the .html file;
<html>
<body>
<APPLET CODE="japp.class" WIDTH="650" HEIGHT="500"></APPLET>
</body>
</html>
And opened it in Firefox, it worked as expected. However, when I change the code in any way, i.e.
public class japp extends JApplet {
     public void init() {
          Container content=getContentPane();
          JButton jb=new JButton("Goodbye");
          content.add(jb);
}and compile it, it still shows the old button that displays "Hello". I've tried deleting the .class file from before and recompiling, that doesn't work. What am I doing wrong?
Thanks.

Reloading the page usually doesn't work. You will need to open the Java Console and clear classloader cache (x). You can also use appletviewer for testing purposes.

Problem of PI am having a weird problem in prinrinting List in Address Book

I am having a weird problem in printing a list of addresses in Address Book. The odd number pages (1,3,5,etc.) print fine but the even number pages move the phone numbers from the third column and prints them over the second column's address and Note fields. Anybody know what is going on here? I have tried the Roll Call Directory software suggested by one respondent on another printing problem and while it is very nice, it seems to have its own quirks (Splits the information when it reaches the bottom left column of a two column set-up or prints at the top left column of the next page when it reaches the end of the right column instead of keeping the address intact in one spot).

P.S. To as to this problem. I tried printing some more pages of the address list and now while some of the odd numbered pages seem OK as you go along it switches to some of the even numbered pages being OK with the odd numbered pages having the third column shifting to overprint on part of the 2nd column. In addition, I can't print envelopes since the program simply does nothing or crashes when the print button is selected.

Weird problem in alv

Similar Messages

Maybe you are looking for