Went to install os mavericks and got this message: MacBook Air Flash Storage Firmware Update 1.1 need. tried that and got: This update requires Mac OS X 10.7.5 or 10.8.5 or later, please advise.
went to install os mavericks and got this message: MacBook Air Flash Storage Firmware Update 1.1 need. tried that and got: This update requires Mac OS X 10.7.5 or 10.8.5 or later, please advise.mac
OK. Now, you say you got this alert through App Store when trying to download Mavericks or after you downloaded it and were trying to install it? Which is the correct case?
The error you are getting may sometimes occur when the computer has already been updated, but I don't know why you would be getting this message. I can only suggest that you take it in for service to find out why this is happening.
Similar Messages
-
Hello, I have a Macbook Air, bought May 2012 or so that came with OS 10.7.4 on it. Did not try to upgrade OS until recently. Tried to upgrade to OS Mavericks, however received error message 'Before installing OS X Mavericks this system requires MacBook Air Flash Storage Firmware Update 1.1." I then downloaded and attempted to install said Firmware Update 1.1, but received another error message, to wit: "This update requires 10.7.5 or 10.8.5 or later"
Who can help me out the this Catch-22? I thought about first updating to OS 10.8, but apparently that is no longer available?Hi CursedIn,
If the Firmware update required for Mavericks requires 10.7.5 to install, you may be able to download it directly from the following link:
OS X Lion Update 10.7.5 (Client Combo)
Regards,
- Brenden -
To download and install iOS X Maverick my MacBook Air demands that I should first of all install MacBook Air Flash Storage Firmware Update 1.1 that I cannot find in MacBook Application Store. So what do I do?
http://support.apple.com/kb/DL1690
-
Can't install MacBook Air Flash Storage Firmware Update 1.1
My macbook air is mid 2012
And I just update the mac on Oct 15
And today I heard about the ssd failure thing.
I head to appstore and find 0 updates there.
Then I download the MacBook Air Flash Storage Firmware Update 1.1 here http://support.apple.com/kb/DL1690
And it says "This computer does not need this update"
Does this mean my mac is good? Or not?dknyxh wrote:
And it says "This computer does not need this update"
Does this mean my mac is good? Or not?
Firmware update tests the computer first to make sure that the SSD is not a faulty one.
Then update will not be installed and returns the message
"This computer does not need this update".
Does this mean my mac is good? Or not?
Your Mac is good.
Best. -
Anyone experience the same result after installing MacBook Air Flash Storage Firmware Update 1.1? Why did my macbook shut down?
Reset SMC. http://support.apple.com/kb/HT3964
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own".
If this does not help, contact Apple.
Best. -
I own iwork '09 for my Imac I and just bought a Macbook Air, can I have have the suite on both computers, and if so how do I do this with no CD drive on the MBAir
Welcome to Apple Support Communities
https://discussions.apple.com/message/18269126#18269126 -
My Macbook air flash had gone for a month and I saw Apple's Macbook air flash storage drive replacement program. I'm not sure whether that program is still available for the broken device or not. Now, I'm booting from the external hard drive. Warranty has gone in October 2013..
I want to send back my macbook air back to apple store. The problem is that I bought it from US and now, I'm using it in Myanmar. If the program is free of charge for my device, it's worth trying to send back to US. Since mine is broken, I'm afraid Apple will take charges for reparing.
So, if anyone having the same problem as me, I would like to get suggestion....
Thank you!!I have no idea about how to handle the international aspect of your question.
But here is the Apple writeup about the problem and the remedy. Maybe that will help you.
http://www.apple.com/support/macbookair-flashdrive/ -
I just purchased a new Macbook Air. I have loaded quicktime, but it doesn't play all formats such as wmv and others. What is the best way to accomplish this?
Download and install (or re-install even if you already had them) the latest versions, suitable for your flavor of Mac and operating system, of:
RealPlayer SP for Mac from:
http://www.real.com/realplayer/mac
Flip4Mac WMV Player from http://www.telestream.net/flip4mac-wmv/overview.htm (Windows Media Player for the Mac is no longer supported, even by Microsoft)
Perian from http://perian.org/
You should read this support page http://perian.org/#support in case you need to delete older codecs. In Macintosh HD/Library/Quicktime/ delete any files relating to DivX (Perian already has them), particularly any DivX extension to Safari. However it should be noted that Perian is not an internet plugin and will not play DivX files imbedded on a website. For that you will need the DivX Player browser plugin available from http://www.divx.com/en/software/mac
The latest version of Adobe FlashPlayer can be obtained from here:
http://www.adobe.com/shockwave/download/download.cgi?P1_Prod_Version=ShockwaveFl ash
You can check here what version of Flash player you actually have installed:
http://kb2.adobe.com/cps/155/tn_15507.html
You can check here: http://www.adobe.com/products/flash/about/ to see which version you should install for your Mac and OS.
You should first uninstall any previous version of Flash Player, using the uninstaller from here (make sure you use the correct one!):
http://kb2.adobe.com/cps/909/cpsid_90906.html
and also that you follow the instructions closely, such as closing ALL applications first before installing. You must also carry out a permission repair after installing anything from Adobe. -
Flash Storage Firmware / Mavericks Upgrade issue
I'm attempting to upgrade to Mavericks through the app store on my Macbook Air 2012, however I keep getting an error: "Before installing OS X Mavericks, this system requires MacBook Air Flash Storage Firmware Update 1.1."
I've completed this upgrade and restarted (twice).
As a note, this update does not show under my "Updates" tab - I had to grab it from the Apple website, which I did (link: http://support.apple.com/kb/DL1690)
Thoughts on to what may be going on?
Thanks in advance.Unfortunately the issue isn't that the update is showing under my "updates" tab, it's that nothing is showing under the tab. I've already updated the firmware (ss attached) and rebooted post updated.
-
Have a Macbook Pro and a 4th gen iPod Touch. Downloaded and install iOS 4.3.2 yesterday. Upgrade went without a hitch, but now iTunes on My Macbook Pro will not open. I get an error that says --The file "iTunes Library" cannot be read because it was created by a newer version of iTunes--. I am running iTunes 10.1. I searched for Updates to my MacBook Pro (running 10.6.7), but comes back saying no updates available. WHAT IS GOING ON??
Is your computer still authorized in the Store menu in iTunes?
iTunes Store: About authorization and deauthorization
When I changed to my new MacBookPro I had to authorize it although I used TimeMachine to transfer my settings and data.
Did you try to deselect Wi-Fi syncing and enable it again after that?
iTunes 10.5 and later: Troubleshooting iTunes Wi-Fi syncing
Did you already transfer your purchases and manually started a backup? -
I successfully installed Adobe Flash Player 11.7.700.169 onto my Macbook Air 2012 (OS 10.7.5) and when I went onto website (Morrision Planetarium-California Academy of Science) it still read that I need update. I've tried 3x and still same message. Is there something I am doing wrong? Quite frustrating!
If you're sure you've installed the latest version of Flash, take each of the following steps that you haven't already tried. After each step, relaunch Safari and test. For a "missing plug-in" error, start with Step 4.
1. If you're getting a "blocked plug-in" error, then from the menu bar select
▹ System Preferences… ▹ Flash Player ▹ Advanced
and click Check Now. Quit and relaunch your browser.
2. Triple-click the line below to select it:
/Library/Internet Plug-Ins
Right-click or control-click the highlighted text and select
Services ▹ Open
from the contextual menu. A folder should open. Delete the following item, or anything with a similar name, if present:
Flash Player (failing).plugin
You may be prompted for your login password.
3. Re-download and reinstall Flash. Download it from this page:
Adobe - Install Adobe Flash Player
Never download a Flash update from anywhere else.
4. If you get a "missing plug-in" error, select
Safari ▹ Preferences... ▹ Security
from the Safari menu bar and check the box marked Enable plug-ins.
5. Select
Safari ▹ Preferences... ▹ Extensions
from the Safari menu bar. If any extensions are installed, disable them.
6. In the Safari preference window, select
Privacy ▹ Remove All Website Data
Close the window. Then select
▹ System Preferences… ▹ Flash Player ▹ Advanced
and click Delete All. Close the preference pane. -
Got a new Macbook Air as a gift and a Iwork cd but my macbook has no cd drive how can i install it
just got a new Macbook air, and the Iwork progarm however my mac does not have a cd drive how can i install it and how do i know were to find my operating system? not to sabby with computers trying my best! some help
Use the Migration Assistant or click here for information.
(78090) -
i am having the problem in my 3gs iphone. it says it shouldnt take more than 3 minutes then i get this message Could not activate iphone.
i have taken the sim card out and put it back in even then its of no use.
if any one out there can help us it would be very nice of them. thank you for your time.I can not get to iPhone screen, so no way to get to Settings. That is the problem. When I connect phone to iTunes I get screen asking to insert SIN card. On the phone I'm getting Cinfigure screen asking Launguage , Country or Region, Wi-Fi, ( I can connect to my home wi-fi), and last screen "Activating your iPhone". After two minutes of waiting IM getting message: Your iPhone could not be activated because the activation server in temporary unavailable. try connecting to iTunes or try later or contat apple.com/support.
Like I mention, I went to Bell as well Rogers store and tried to insert active SIM card with no results.
Yes, my friend unlock the phone to use with Rogers but I don't know where -
I have new MacBook Air. When I first got it, I migrated some of my files from my PC to the MacBook Air without any problems. Now I'm trying to migrate more files, music, etc. and I keep getting the continuous spining circle with "Looking for Other Computers." I've tried everything and for some reason it is not finding my PC. What am I doing wrong?
Use the trackpad to scroll, thats what it was designed for. The scroll bars automatically disappear when not being used and will appear if you scroll up or down using the trackpad.
This is a user-to-user forum and most people will post on here if they have problems. You very rarely get people posting to say there update went smooth. The fact is the vast majority of Mountain Lion users will not be experiencing any major problems with the OS, or maybe with apps which are not compatible, but thats hardly Apple's fault if developers don't update their apps. -
How do I install windows and bootcamp on my macbook Air
Hi
I need to install Windows and Bootcamp on my macbook Air, due to a software tool a customer needs that only runs on windows.
The initial instructions say I cannot do this with a remote DvDplayer,
Who has experienced this?
Chrishttp://manuals.info.apple.com/en_US/boot_camp_install-setup_10.7.pdf
Maybe you are looking for
-
I have two iPads under the one user ID. Mine and my 4 year olds. When making purchases for the App Store, the purchase goes to both IPads. How do I stop content going to both? Any help would be great.
-
Sometimes I can't view web pages when the firewall is on, even though I can ping from the computer and everything seems fine with the modem. It happens a few times every week. When this happens the firewall log has entries like this: Feb 16 00:01:29
-
PutValue and getValue are deprecated...
session.putValue("paramName","value") and session.getValue("paramName") are deprecated. Do you know what functions I can use to replace them?
-
Changing the IP address in solaris 10 and setting up networkconnection
Hello, I need to change the IP address and make it avaliable to the network. I have changed the below file # IP -> /etc/hosts # Netmask -> /etc/netmasks # Gateway -> /etc/defaultrouter # IP (again) -> /etc/inet/ipnodes (This is new in Solaris 10) # D
-
Hi Guys! I have a RangePlus Wireless-G router (WRT110) and I was reading one one of these forums that if the firmware is 1.0.04 then I need to return it. (?) I've been having a lot of problems with it, such as it takes it about 10 minutes to actual