WEP key for Cisco 2100

Hi
I am having a lot of trouble trying to set a WEP, or any other key. When I am visiting 192.168.100.1 there is no option for log in or anything, only observe. The pages 192.168.0.1, 192.168.1.1 & 192.168.2.1 also time out every time. When I ping, these 3, it continuously times out too. It has been like that for some days. I have had this modem for around a year but only recently wanted to set up Wifi through a USB adapter and discovered this problem. I'm using windows 7, tried some drivers but they didn't help or weren't even compatible. PLease, can somone tell me how to get my WEP etc key so I can get this set up before Xmas?
Edit: I have so far tried every suggestion from my ISP & information posted on the internet and nothing helped

Hi,
you should be able to access the controller by the following way:-
Step 1 Connect your PC to the service port and configure it to use the same subnet as the controller (for example, 192.168.10.1).
Step 2 Start Internet Explorer 6.0 SP1 (or later) or Firefox 2.0.0.11 (or later) on your PC and browse to http://192.168.1.1. The configuration wizard appears.
it is possible that the issue is windows 7 which you are using. Please check with XP or any other machine to make sure windows 7 is not causing the issue. Please check the config guide for step by step access:-
http://www.cisco.com/en/US/docs/wireless/controller/7.0/configuration/guide/c70intf.html#wp1142477
Once you are able to access the controller, then you can setup WEP:-
http://www.cisco.com/en/US/docs/wireless/controller/7.0/configuration/guide/c70sol.html
thanks,
Vinay
If  this helps you and/or answers your question please mark the question as  "answered" and/or rate it, so other users can easily find it.

Similar Messages

  • How do i find WEP key for wrt54g

    Hi, my husband set up our system and i am trying to add a new wireless printer. He is out of the country for business, hence my problem. How do i find what the WEP key/ network key is? Thank you for your help.

    If you have other computer which had connected to this wireless network before, probably you can also use this wireless key finder on that computer to locate the WEP encryption key.
    Hope this helps.

  • Can't set WEP key for broadcom-wl?

    I did a fresh install of Arch this morning at my office. I have an Acer Aspire laptop with a Broadcom wireless card that works with broadcom-wl (I've used the driver for a long time and it works perfectly... with open or WPA networks). The network at my office is WEP. So after installing the drive, adding lib80211 and wl to my MODPROBE (and !b43 !ssb), I reboot and see my wireless as eth0.
    If I try to iwconfig eth0 key XXXX-XXXX-XX or iwconfig eth0 essid WIFINAME key XXXX-XXXX-XX, no matter what combination I try, I get an error saying that it's an invalid argument for SET_ENCODE. I've check the Wiki and man pages for iwconfig, and can't seem to find any solution. Does anyone know why I can't put in a WEP key?
    ((Side note: everytime I've installed Arch, my wifi starts out as eth0 until I get connected and run pacman -Syu. Then I reboot and it shows up as wlan0, and my Atheros ethernet is eth0 or eth1.))

    Thanks for a response. So this is a fresh-from-the-oven install. I usually get my wifi connection set up and then create my user and go about setting everything else up. Meaning I've been trying as root.
    I can see the wireless network with iwlist scan and it shows up as encryption key: on. Also, I tried using each lib80211 mod or some combination thereof in my rc.conf. No dice.
    Lastly, since I didn't include it before, here's the exact error I get when I try to assign a WEP key with iwconfig:
    Error for wireless request "Set Encode" (8B2A) :
    SET failed on device eth0; Invalid argument.
    UPDATE: I can set the key using [x] between key and XXXXXXXXXX. However, any combination I'm trying of essid and key/enc isn't showing up in iwconfig. No errors, but my iwconfig information isn't changing. It's progress... I think.
    UPDATE #2: I can iwconfig eth0 essid linksys (the office next to us) and grab that one (I don't know their password ) and it updates iwconfig, but our own network doesn't update iwconfig when I run iwconfig essid. >.<
    Last edited by mtcupps (2011-06-17 18:20:02)

  • I have an hp wireless d110a printer how can i get another wep key for it to set it up?

    Have a new HP d110a wireless printer how do i get or put in another key that it will take to finish setting it up to work? I need help. I had one of these before,and had to send it back, and HP sent me another one just like it. It will not take anything i put in it. How do i fix this. I went through all the steps, and it still does not take anything. Need help.

    Hi,
    Only you (or relatives) know your WEP key, it should be in your access point (AP), you can logon to it and check this out.
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • WEP Key for registering XP to use Airport connection?

    In my Windows XP partition, the computer recognizes my Airport card, and can access the hardware; however, it's not allowed to connect with my ordinary password, rather it's calling for a multi-digit "WEP Key" - How do I figure out what my WEP Key is to allow it access?

    Hi John,
    Go to Applications-Utilities-Airport Admin Utility,
    and click to open. Highlight your base station and
    double click to open the preference window. In the
    toolbar at the top of the window, click on Password.
    In the drop down you will see the Hex equivalent
    password (WEP key). This is the number you need to
    enter in XP.
    Thanks much!

  • How do you find the wep key for the wifi?

    I need the WEP key to be able to acess my wifi through my playstation. And i am unsure of which operating system to choose i know i have the most up to date one though

    Is the Wi-Fi network, provided by your AirPort Extreme, configured for WEP wireless encryption? If not, and is using WPA or WPA2 instead, then the Playstation is not properly recognizing the security type.
    Which exact version of the Extreme do you have?
    By operating system, are you referring to the one you are running on your computer? Is so, what is the make & model of your computer?

  • N8, unable to enter full WEP key for WLAN

    I have a 28 character WEP key, but my N8 seems to be limiting me to 26 characters. I've tried it a couple of times & still the same, am I imagining it???
    Any way round this?
    Nokia N8 on Belle

    there isn't a limit of 26 there unless maybe you need an update but i'd try resetting your device first, i've just had a look and i got over 30 characters before i stopped

  • How can I change a wep key for a previous wifi

    I have a previously saved wireless, but i dont know how to edit the settings and change them, like the wep key

    Hello w:
    I think an Apple store would be the best approach.
    Barry

  • N8 How to change WEP key

    I have typed in a wrong WEP key for a WLAN network
    So when I try to use that WLAN Network, it will show connected but I cannot surf at all.
    How can I change the WEP key ?
    Solved!
    Go to Solution.

    Settings>Connectivity>Settings>Destinations>Internet>YOUR CONNECTION>WLAN Security settings>WEP key settings>WEP Key
    Easy?!

  • Storing WEP keys...

    Hi guys,
    Just got the X6 after having the 5800 for a while. With the 5800 if I entered a wep key for a WLAN it remembered it, and whenever I was in the area of said WLAN I could just click on the connection and go on the internet - with the X6 every single time I disconnect and re-connect it asks for the wep key again!
    This is REALLY annoying. Please tell me there's a way for the phone to store the wep keys of networks!?
    Solved!
    Go to Solution.

    But wait, this doesn't  really solve the problem completely because now you have to do this configuration manually every time you access a new network, and the point is that it could be possible to save the key automatically, every time you try to access a new network. Or not?
    Please help
    Cheers

  • I have an ipod touch and everytime i connect to my home wirless network it asks for a wep key. It never did that before?

    i have an ipod touch and everytime i try to connect to my home network it asks for a wep key. It never did that before . Now everytime i take it out of the house and come home it asks for it .no one elses in the family asks for the wep key. What can i do about this?

    Can no one help?

  • My mac keeps asking for my WEP key to get on the internet why?

    my mac keeps asking for my WEP key to get on the internet why? And where can i find it

    It's referring to the MAC password that you have setup.
    A software prompts for a password only when there are restrictions set on the user account for unauthorised access to system files and folders.

  • I am trying to link our xbox and PC into our wireless network.  I am using an apple airport express and it is asking me for a WEP Key.  Where can I find my wep key?

    I am tyrying to link our xbox and PC int oour wireless network.  I am using an apple airport express and it is asking for my WEP Key.  Where do I find it?

    You should be able to setup WPA / WPA2 access, rather than WEP - which is old an less secure. (Unless your devices are too old for WPA??)
    Try this link: http://spotlight.getnetwise.org/wireless/wifitips/apple/apple-wpa.php
    **Edit
    Airport does support the WEP protocol.
    Apple Docs: http://docs.info.apple.com/article.html?path=Airport/5.0/en/ap2084.html

  • Unable to get registry key for protectlink in cisco rvs4000

    All,
    I need help. Just a few weeks ago I purchased a rvs4000 router. On that small business device is a product called protectlink. To get an activation key, you need a registration key first. That is normal in the package. However, my wify like to cleanup up and throws stuff away that she should not do. So, I lost the registration key.
    It is impossible to key a new registration key. The webstore does not have them. They are in the package and will not open an other one. Cisco (if you can get passed the ...you don't have a support contract...go away statement) does not even know that they have this product. Registration keys, never heard of it. But you get the normal ... we can't help you, go to the webstore or trendmicro.... And that after the statement, we don't know that product. How do you know that this is a trenmicro piece of software.....
    Well call trendmicro.... Same answer, we can't help you. Go to Cisco or the Websore. I realy feel like a dog trying to get his tail.
    So, last hope of some progress I post this on the community group for small business devices. Maybe this will help. If some one can help me getting a registration key for a cisco small business router rvs4000 to obtain an activation code for the cisco/trensmicro protectlink product.... then please send it [email protected]
    Kind regard, Rembrandt

    I want to inform you that the rvs4000 router does not come with the protectlink license. Protectlink is a service that you can purchase from a resseller or you can also get the trial license from the cisco website to test it our before you buy it for free. I am going to provide you with the link for the trial: http://www.cisco.com/cisco/web/solutions/small_business/products/security/protectlink/index.html
    The second link is to find a trend micro reseller: http://www.trendmicro.com/buy/partners/Small-Biz.asp
    Thanks
    Q

  • How do i get my Ipad 1 to ask for a wep key insted of a password for wifi setup?

    how do i get my Ipad 1 to ask for a wep key insted of a password for wifi setup?

    "WiFi setup"?  I'm not sure I understand.  Are you trying to set up your WiFi network from an iPad?
    Anyway, the answer to your question is likely this:
    Go to Settings > WiFi.  Find your network.  Click the small "i" in the circle on the right of that line.  That probably has the information you are looking for (or the place to set it).

Maybe you are looking for