WEP & WPA networking issues

Hello...
Well, I'm really chasing my tail here.
I've got a mixed wireless network at home centered around an airport extreme base station. I've chosen "WPA2 personal security." I have 3 computers with airport extreme cards that work just fine with this, but I have two older imac 800s with original airport cards (firmware 9.5.2) & running Tiger 10.4.11. They cannot log onto this network cuz WPA isn't an option on the pulldown. I did an online search and came upon this page:
http://support.apple.com/kb/HT2594?viewlocale=en_US
Which leads me to believe it is POSSIBLE for an original airport to join a WPA network.....but it falls pretty short in terms of telling me exactly how to pull this off.
Would appreciate some help.
Thanks.

Tim, a simple way to test would be to change the router to WEP, then setup the Mac with that and the password and make sure you can connect. If it works, then you can reset the other equipment accordingly.
While I do not advocate use of WEP because of its weaknesses, that would get you going for the short term. Meanwhile, search the AirPort software download to find the latest that will work with your OS and card. If that is installed, make a copy of what you now have for backup if needed, and you can then go to WPA you can raise the security level of your network. But always make a copy of the appropriate software that is working before replacement...can never have too many backup copies.

Similar Messages

  • I cannot get my iMac with built-in airport to allow internet connections to Nook and PS3. The devices access the network, but internet connection fails. Internet sharing is enabled, network security (WEP, WPA) is completely off.  What to check next?

    I cannot get my iMac with built-in airport wi-fi to allow internet connections to Nook and PS3. The devices access the network, but internet connection fails. Internet sharing is enabled, network security (WEP, WPA) is disabled.  What to check next?

    On an additional note, I've purchased a wireless router and everything connected on the first attempt.  It just vexes me that the built-in wireless isn't working as a router.  Is this another example of "Mac only plays with Mac"?

  • WEP encrypted network - can't connect

    I'm trying to use netcfg2.0.6 to connect to a WEP-encrypted network, but it doesn't work, with the error message:
    :: father up - Wireless association failed. [FAIL]
    I can correctly connect to a different wpa-encrypted network, so I'm assuming it's a problem with my configuration, not my hardware.
    ifconfig -a (just relevant wlan0 part) gives:
    wlan0 Link encap:Ethernet HWaddr 00:15:AF:3B:64:A9
    UP BROADCAST MULTICAST MTU:1500 Metric:1
    RX packets:0 errors:0 dropped:0 overruns:0 frame:0
    TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
    collisions:0 txqueuelen:1000
    RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
    iwconfig before attempting to connect (however, I have tried to connect earlier today, which is probably why the ESSID is set):
    wlan0 IEEE 802.11g ESSID:"02wireless314821"
    Mode:Managed Frequency:2.412 GHz Access Point: Not-Associated
    Tx-Power=27 dBm
    Retry min limit:7 RTS thr:off Fragment thr=2352 B
    Link Quality:0 Signal level:0 Noise level:0
    Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
    Tx excessive retries:0 Invalid misc:0 Missed beacon:0
    The profile I'm using for this connection is:
    CONNECTION="wireless"
    INTERFACE=wlan0
    SCAN=no
    SECURITY="wep"
    ESSID="02wireless314821"
    KEY="xxxxxxxxxx"
    IP="dhcp"
    TIMEOUT=20
    I'm using the stock kernel from testing, with the rtl8187 driver.
    Does anyone have any idea what's wrong, and how to fix it?

    I have the exactly same issue. I have to do 'netcfg2 wifi' about 3-5 times to connect. I also have iwl3945. More here (my thread about this issue). I quickly wrote this script:
    #!/bin/bash
    ifconfig wlan0 up
    iwconfig wlan0 essid linksys key `grep KEY /etc/network.d/wifi | cut -d'"' -f2`
    sleep 1
    ifconfig wlan0 192.168.1.101
    echo "nameserver 192.168.1.1" > /etc/resolv.conf
    route add default gw 192.168.1.1
    sleep 1
    ping www.seznam.cz
    When run for the firs time, it freezes and I have to do ^C (C-c or Ctrl-c) to kill it and run it again. Second time it goes like:
    SIOCADDRT: File exists
    PING www.seznam.cz (77.75.76.3) 56(84) bytes of data.
    64 bytes from www.seznam.cz (77.75.76.3): icmp_seq=1 ttl=56 time=14.1 ms
    64 bytes from www.seznam.cz (77.75.76.3): icmp_seq=2 ttl=56 time=13.6 ms
    ^C
    --- www.seznam.cz ping statistics ---
    2 packets transmitted, 2 received, 0% packet loss, time 1003ms
    rtt min/avg/max/mdev = 13.680/13.938/14.197/0.284 ms
    I haven't tested it more yet, because it works ten times faster than netcfg2 for me, which makes me happy for now. I have no idea whats going on behind if/iw commands.
    Last edited by dante4d (2008-06-15 10:02:32)

  • Difference between WEP, WPA, and WPA2 and better suggestion to use for shared family users

    What is the difference between WEP, WPA, and WPA2? My router is set up on my family PC and connected to a modem so I access Wi-fi through my laptop and my sister has a laptop too and uses our family network to get internet. I just set up a WPA today, so will we all be able to get internet (along with my family using the pc, and my sis on her laptop, even at the same time) protected? (like nobody else using our network)

    Wired Equivalent Privacy, commonly called WEP is 802.11's first hardware form of security where both the WAP and the user are configured with an encryption key of either 64 bits or 128 bits in HEX. So when the user attempts to authenticate, the AP issues a random challenge. The user then returns the challenge, encrypted with the key. The AP decrypts this challenge and if it matches the original the client is authenticated. The problem with WEP is that the key is static, which means with a little time and the right tool a hacker could use reverse-engineering to derive the encryption key. It is important to note that this process does affect the transmission speed.
    WPA builds upon WEP, making it more secure by adding extra security algorithms and mechanisms to fight intrusion.
    WiFi Protected Access (WPA) is the new security standard adopted by the WiFi Alliance consortium. WiFi compliance ensures interoperability between different manufacturer’s equipment.WPA delivers a level of security way beyond anything that WEP can offer, bridges the gap between WEP and 802.11i networks, and has the advantage that the firmware in older equipment may be upgradeable.
    WPA2 is based upon the Institute for Electrical and Electronics Engineers’ (IEEE) 802.11i amendment to the 802.11 standard, which was ratified on July 29, 2004. The primary difference between WPA and WPA2 is that WPA2 uses a more advanced encryption technique called AES (Advanced Encryption Standard), allowing for compliance with FIPS140-2 government security requirements. 

  • X60s upgrades to XP SP3 and only connects to WEP WiFi Networks

    Hi,
    I have an X60s that upgraded to Windows XP SP3 and now the X60s can only connect to WEP Wifi Networks.
    If I try to connect to an WPA2 or WPA network it keeps trying to optain an IP address and then it stops with
    that red X on top of the NIC icon
    Is there a new driver of hotfix from Lenovo in this case?
    Many thanks
    Oliver

    Hi,
    I have an X60s that upgraded to Windows XP SP3 and now the X60s can only connect to WEP Wifi Networks.
    If I try to connect to an WPA2 or WPA network it keeps trying to optain an IP address and then it stops with
    that red X on top of the NIC icon
    Is there a new driver of hotfix from Lenovo in this case?
    Many thanks
    Oliver

  • TS1398 How do I read the WPA network key on my iPhone?

    I have an iPhone 4 that is already accessing the network. However, the network key is not written on the bottom of the router and I didn't memorize it.
    I want to give my MacBook access to the same network and I can't seem to pull-up the WPA key on my phone.

    I don't think you can.  I had the same issue, but I remembered my password finally.  I look in the iphone and theres no option to view the wpa network key.
    If you have a different computer hook to the wifi, you can view the network key. 
    If you don't have one, google on how to reset your network key for you router.

  • 10.4.9 Killed my WEP/WPA abilities

    Just updated to 10.4.9 on my Core 2 Duo black Macbook, and I can no longer connect to my home network via WEP or WPA. If I remove all encryption from the network, then 10.4.9 will work. The network is ok, because my Powerbook running Panther continues to work fine, whether the network is WEP or WPA.
    My router is a D-Link DI-624, but the MacBook worked fine with it before the update.
    Anyone else seeing anything like this? I need WEP/WPA access on my MacBook.

    Jay, I just upgraded and see exactly the same behavior on my MBP 17. It would appear its not WPA that is the problem but rather that the Airport Network password item in the KeyChain cannot be accessed and its an outright frigging bug that should have been caught in testing. Try this:
    Open Keychain access and find the entry in the System chain. Open it and check the box to show the password. Enter your keychain master password and you'll get an error accessing the password. Change to the access control pane and you'll be asked for the keychain password. It is accepted and works, but if you go back to the Attributes pane you get the same error for the show password value when you check the box on the Attributes pane.. pane.
    FWIW I checked the disk and permissions before installing the update AND I ran first aid on the keychain, trying to avoid EXACTLY this problem. I saw similar though more easily fixable problems upgrading to 10.4.7 and 10.4.8. I hate doing Mac upgrades you can gaurantee SOMETHING will break! Look like a trip to the genius bar tomorrow!
    My Access point is a DI-624 like yours and other system can aceess it just fine so its NOT the AP, its the software.
    Phil

  • MacBook Pro doesn't connect to a wpa network.

    My MacBook Pro won't connect to the internet when I set my router to have wpa security a posed to wpa2, which was what it was when it was set up.
    I Want to set it to wpa because the sony psp won't connect to a wpa2 secured network so It would be great if I could change it so all of my devices could connect with out trouble.
    Thanks,

    Hi JPait996,
    Welcome to Apple Support Communities.
    It sounds like your MacBook Pro connects to your Wi-Fi network when it's setup as WPA2 but there is an issue connecting to a WPA network. What happens when your MacBook Pro tries to join the network and does it get a valid IP address? The article below provides lots of great tips that should help you resolve the  Wi-Fi connection issue.
    Wi-Fi: How to troubleshoot Wi-Fi connectivity
    http://support.apple.com/kb/HT4628
    Cheers!
    -Jason

  • Airportd crash prevents (easy) access to WPA networks

    I'm seeing a crash when I try to connect to a WPA network on MacBook Air. The Airport software reports Connection Failed in the GUI. However, the Console reveals that airportd is crashing:
    +19/02/2008 08:40:43 com.apple.launchd[1] (com.apple.airportd[91587]) Exited abnormally: Bus error+
    +Exception Type: EXCBADACCESS (SIGBUS)+
    +Exception Codes: KERNPROTECTIONFAILURE at 0x0000000000000000+
    +Crashed Thread: 0+
    Connections to open networks work fine. Tried safe boot, restarts and KeyChain password tricks mentioned elsewhere to no avail.
    Also get the same issue on an Intel Mac Mini. Oddly, on that I can get a connection by using the Network Setup Assistant and selecting +I use Airport to connect to the Internet wirelessly+. However, the top two options are disabled on the MacBook Air so I can't use that trick!
    This wireless network has been in use for years and is still in use by other Windows computers. It has previously worked fine on the Mac Mini. I suspect a general OS fault evident in 10.5.2.
    Any thoughts folks?
    Dave

    I'm seeing similar behavior with my Macbook Pro since upgrading to 10.5.2 (as evidenced by my own thread on this same matter). Couple of comments:
    1) This only happens for an Airport "location" where IPv4 is set manually and DNS servers are also specified manually. It does not happen on my "Automatic" location, which I use for my home network.
    2) It crashes about half the time. Usually if I put my computer to sleep, then wake, airport starts up and connects to the network just fine. After the next sleep/wake, it crashes again.

  • Guest Network Issue

    I want to thank all of you for your help. I finally have installed my AE software and all of our computers are up and running, two macs and one pc upstairs. I'm delighted. I did put in a password, but what I'm not sure of is the Guest Network Settings. Should I have checked the Guest Network which I did and it says WPA 2 Personal. I entered a guest network password. Does this mean that no one can use this but those who are on the network which would be my husband and myself? I don't want anyone else to access the wifi. I did enter a regular password at the beginning for the settings and of course a name for the AE.
    I'd appreciate an answer to this because I'm concerned about privacy.
    Also, I wanted to mention that with AE the connection seems faster than just with the modem. I'm just so delighted!

    Bob, I just turned it off. Will my husband still be able to access AE? he was able to. I am able to on this computer. I have the software set up on my Intel machine this one is older. I've just plugged this one into the AE with an ethernet cable. All seems to work well, but I still don't understand the Guest Network issue. All I care about is that we can get on. I don't want anyone else to be able to access the connection. So, I turned off "enable guest network." Did I do the right thing? Thanks again!

  • Network issue fixed

    Hi all,
    New to the forums, just upgraded to Snow Leopard on an iMac last weekend and did not have any problems with the install but did have what appeared to be "network issues" mainly in the form of Safari & Firefox loading pages real slow or not at all. Thought it was a browser issue on mac because I could pull up a linux vm (fusion) and everything worked fine no problems so I have been using the vm to surf for answers.. Saw on another thread to try using on a different network so plugged in my air card and everything worked fine.. That pointed to my router (netgear wpa ~3yrs old, had never upgraded the firmware since it wasnt "broke") after downloading the latest firmware from netgear everything worked fine, so this was not an Apple problem in my case, know everyones setup is different, hope this might help others with the same issue.
    Mark

    Don't upgrade. It is not safe. Stick with SLS.

  • How to resolve network issue or dns to access web page on snow leopard server?

    I have my network setup like as follows:
    internet > router 1 > ethernet ports > switch > router 2
    I have a mac osx snow leopard server connected to "router 1", but it is so slow when accessing a web page hosted on the server from a browser on a workstation connected to either router 1 or router 2?
    Is there a problem with my network setup or maybe because I changed the name to newservername.local?

    @Jeff and @Camelot,
    I think it is a DNS issue.  I completely reset the DNS settings on server and the local name with the steps below, but now cannot access the site hosted on the server at all
    I used a modified version of http://www.mkahn.com/2010/09/configuring-dns-on-mac-os-x-10-6-snow-leopard-serve r-for-hosting/ to reset the server set
    1.  Stop DNS Service in Server Admin
    2.  Close Server Admin
    3.  Obtain 10.6 DNS Default files (below)
    4.  Overwrite the DNS files with DNS Default files:
    /etc/dns/loggingOptions.conf.apple
    /etc/dns/options.conf.apple
    /etc/dns/publicView.conf.apple
    /var/named/named.ca/etc/named.conf
    /var/named/named.local
    /var/named/localhost.zone
    5. Restart your server
    All machines have 1ms ping responses within the network including this snow leopard server that I am trying to setup.  There is another test web server that return pages instantly within this network so I doubt it is a network issue, but a DNS issue.

  • Networking Issues after Upgrading to Windows 8.1

    I have a Windows 8 desktop PC that is working fine with my network.  I can browse the Internet fine using all major browsers etc.  After upgrading to Windows 8.1 through the Windows Store I noticed that my wired networking was not working correctly.
     The status of the network does not change (i.e. it doesn't change to Limited Connectivity) however browsing to sites in Chrome, IE or Firefox doesn't work as well as Windows 8.
    IE11 gives me the error "This page can't be displayed, make sure the web address is correct" and other browsers give a similar error.  I normally have to refresh 2-3 times to get a new page to load, sometimes even more.  Everything works
    fine from a laptop connected at the same time so it isn't an network issue with my provider.
    I thought this might be a driver issue with the two on-board Marvell wired network adapters.   I wasn't able to rollback the driver to older versions I found on the Internet.  I then purchased another network card, Intel Desktop gigabit and the
    issue still persists with that adapter.  I then tried a USB wireless adapter and the issue still persists using wifi with the wired adapters disabled.  I tried a new network cable and no luck either.  I also tried resetting the IP stack using
    the various netsh commands.
    After that I thought I might try reset the Windows 8.1 PC, however that didn't work as I didn't have the restore image available as I upgraded from the Windows Store.  I then tried installing Windows 8.1 fresh using a ISO with my Windows 8 key using
    some of the recent guides that are available.  That all worked but it didn't fix the networking issues.
    I re-installed Windows 8.0 and the networking is now fixed and back to working normal again.  I'd like to try again but I think I will have the same problems.  I can't imagine why this would be a driver issue as I tried 3 different network adapters
    and two installs of Windows 8.1.  Any ideas what would be the cause of the Windows 8.1 issue?

    HI,
    Since this issue only occurred in the your desktop PC, and many network adapters you tried, failed, thus I think maybe we should focus on the model of your desktop PC, I suggest you update the BIOS and chipset from the manufacture to improve
    the performance of win8.1.
    Please also test this issue in safe mode with networking.
    Please refer to:
    Windows Startup Settings (including safe mode)
    http://windows.microsoft.com/en-in/windows-8/windows-startup-settings-including-safe-mode
    I’d like to share the following article with you:
    Wired and wireless network problems
    http://windows.microsoft.com/en-IN/windows/network-connection-problem-help#network-problems=windows-81&v1h=win81tab1&v2h=win7tab1&v3h=winvistatab1&v4h=winxptab1
    Regards,
    Yolanda
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.
    The issue occurs in safe mode as well under Windows 8.1.  The motherboard is an Asus P5B Premium, however it works on Windows 8.  How would I update the chipset when booted into Windows 8.1?  In Device Manager it wasn't allowing me to update
    the network drivers as they were newer versions already installed.
    Edit:  I also installed at Intel Chipset Device software dated 8/8/2013 with version 9.​4.​0.​1026 and the issue still occurs.  I am also running the latest BIOS that is available.

  • Very Strange Network Issue With Two Guests on 2012 R2 Hyper-V Failover Cluster

    Hi all.  We're having a odd issue with two guests on our 2012 R2 failover cluster.  
    In a nutshell, if we shutdown a particular server (I'll call it Server A) another totally different server (Server B) on the same node loses it's network connectivity to the domain. If we start server A back up, network connectivity returns on server B.
    At first I thought server A might be running a service that was somehow linked to server B, so I decided to disable server A's NIC.  Interestingly, that had no affect on server B's connectivity.  
    The next step I tried was pausing server A and again, no adverse affect on server B's connectivity.  
    Next step was to live migrate server A to another node.  This action did
    cause server B to lose its network connection. 
    One other clue is that if I ping server B from either of the Hyper-V hosts in the cluster, I never lose network connection to server B.
    So I would suspect this is some network issue on the cluster, but I'm kind of at a loss where to go from here.  
    Has anyone seen this behavior before or does anyone have any troubleshooting suggestions I can try?
    Thanks! 
    George Moore

    Hi Sir,
    I'v never seen this before .
    >>Next step was to live migrate server A to another node.  This action did
    cause server B to lose its network connection. 
    They are connecting to same virtual switch ?
    First please run cluster validation to check if there is any error .
    If it is ok , please try the following items for troubleshooting :
    1. shutdown  serverA   serverB
    2. then add another virtual NIC for serverB
    3. start server B  check if the issue happens to both "old" and "new" virtual NIC .
    In addition , you can live migrate both A and B to another node , then try to live migrate A to the original node .
    If the issue persists , I would suggest you to remove that virtual switch on both nodes then re-create them .
    Best Regards,
    Elton Ji
    If it is not the answer please unmark it to continue
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] .

  • IPhone 4s 64GB Network Issues

    I have a iPhone 4s 64GB that has intermident wifi network issues. I have completely restored the phone and am running in factory configuration with only one app installed (ping utility)and am still experiencing the following issue. When using the network (safari, facetime, etc) the network will become unresponsive. If i start a ping from the device the to the network gateway I get no response. If I ping the iPhone from the computer I get no response. If I toggle airplane move on then off everything starts working and the device will start to function normally and respond to pings. This happens continually throughout the day to any network I am connected to. I have received a replacement device and still have the same issue. I have talked to apple numerous times and they still say it is hardware. I have also deployed 100 iphone 4s to our company and hear of similar issues. Has anyone else had this issue or found a resolution? I am a very big advocate of apple products but after this exprience I will no longer be upgrading to the latest and greatest. I have reverted to using my iPhone 4 with ios5 with no issues.
    I have attached the console logs from my iphone that  retrieved from the iPhone configuration utility from a time when the issue was occuring.
    Nov 14 12:07:25 unknown lockdownd[22] <Error>: 0173b000 __handle_watcher_service_start_block_invoke_1: Stopping heartbeat service for host 30225B68-00D2-49E3-AE4A-38D7AA7B605B
    Nov 14 12:07:29 unknown kernel[0] <Debug>: AppleBCMWLANCore::powerStateWillChangeToGated(): cap 0x8000, stateNum 0, dev 0x81609000 (this 0, provider 1)
    Nov 14 12:07:29 unknown kernel[0] <Debug>: AppleBCMWLANCore::powerOffSystem() : Powering Off and sleeping
    Nov 14 12:07:29 unknown kernel[0] <Debug>: AppleBCMWLANCore::powerOff(): fStateFlags(34822)
    Nov 14 12:07:29 unknown kernel[0] <Debug>: AppleBCMWLANCore::configureWoWAssociatedEntry(): Unicast IP filter enabled
    Nov 14 12:07:29 unknown kernel[0] <Debug>: AppleBCMWLANCore::configureWoWAssociatedEntry(): Enabled WOMP filter  0 (ID=103)
    Nov 14 12:07:29 unknown kernel[0] <Debug>: AppleBCMWLANCore::configureWoWAssociatedEntry(): Enabled WOMP filter  1 (ID=104)
    Nov 14 12:07:29 unknown kernel[0] <Debug>: AppleBCMWLANCore::configureWoWAssociatedEntry(): Enabled the '!ICMP' packet filter
    Nov 14 12:07:29 unknown kernel[0] <Debug>: AppleBCMWLAN Sleeping on BSS:   @ 0xc1b50c00, BSSID = 5c:d9:98:02:9a:40, rssi = -48, rate = 54 (100%), channel =  7, encryption = 0xc, ap = 1, failures =   0, age = 2498, ssid[ 9] = "CMSFLWLAN"
    Nov 14 12:07:29 unknown kernel[0] <Debug>: AppleBCMWLANBusInterfaceHSIC::prepareForWoW(): Sending disconnect command..
    Nov 14 12:07:29 unknown kernel[0] <Debug>: AppleBCMWLANBusInterfaceHSIC::sendDisconnectCommand()
    Nov 14 12:07:29 unknown kernel[0] <Debug>: AppleBCMWLANCore::powerOff(): Associated & WoW enabled, WiFi will remain up
    Nov 14 12:07:29 unknown kernel[0] <Debug>: virtual void AppleRGBOUT::do_power_state_change(): fSoft: 0 fHard: 0 swapBusy: 0  fController: 0 -> 0
    Nov 14 12:07:29 unknown kernel[0] <Debug>: AppleEmbeddedUSBArbitrator::setPowerState: calling handleUSBCableTypeChange from setPowerState
    Nov 14 12:07:29 unknown kernel[0] <Debug>: AppleSynopsysOTGDevice::handleUSBCableDisconnect
    Nov 14 12:07:29 unknown kernel[0] <Debug>: AppleBCMWLANCore::powerStateDidChangeToGated(): stateNum 0, pol 0x81609000 (this 0, provider 1)
    Nov 14 12:07:29 unknown kernel[0] <Debug>:
    Nov 14 12:09:05 unknown CommCenter[17] <Notice>: Telling CSI to exit low power.
    Nov 14 12:09:05 unknown kernel[0] <Debug>: pmu wake events: wlan
    Nov 14 12:09:05 unknown kernel[0] <Debug>: virtual void AppleRGBOUT::do_power_state_change(): fSoft: 0 fHard: 1 swapBusy: 0  fController: 0 -> 0
    Nov 14 12:09:05 unknown kernel[0] <Debug>: AppleEmbeddedUSBArbitrator::setPowerState: calling handleUSBCableTypeChange from setPowerState
    Nov 14 12:09:05 unknown kernel[0] <Debug>: AppleSynopsysOTGDevice::handleUSBCableDisconnect
    Nov 14 12:09:05 unknown kernel[0] <Debug>: AppleSynopsysUSBEHCI[0xc143bc00]::UIMInitialize - HSIC ports enabled
    Nov 14 12:09:05 unknown kernel[0] <Debug>: AppleBCMWLANCore::powerStateWillChangeToGated(): cap 0x8000, stateNum 1, dev 0x81609000 (this 0, provider 1)
    Nov 14 12:09:05 unknown kernel[0] <Debug>: AppleBCMWLANCore::powerStateDidChangeToGated(): stateNum 1, pol 0x81609000 (this 0, provider 1)
    Nov 14 12:09:05 unknown kernel[0] <Debug>: AppleBCMWLANCore::powerStateDidChangeToGated(): No fBus, deferring reconnect bus...
    Nov 14 12:09:05 unknown kernel[0] <Debug>: AppleD1881PMUPowerSource: AppleUSBCableDetect 0
    Nov 14 12:09:05 unknown kernel[0] <Debug>: AppleD1881PMUPowerSource: AppleUSBCableType Detached
    Nov 14 12:09:05 unknown kernel[0] <Debug>: AppleBaseband::resetDetectInterrupt with 0
    Nov 14 12:09:05 unknown CLTM[12] <Error>: CLTM: resetting temps: now = 1321290545, last update = 1321290444
    Nov 14 12:09:05 unknown timed[2618] <Notice>: (Note ) CoreTime: Received network time zone "NITZ" with 342983343.00 -300 NO DST in 310
    Nov 14 12:09:05 unknown timed[2618] <Notice>: (Note ) CoreTime: Searching in NO DST time zone map for offset -300 and MCC 310
    Nov 14 12:09:05 unknown timed[2618] <Notice>: (Note ) CoreTime: Received timezone "America/New_York" from "NITZ"
    Nov 14 12:09:05 unknown timed[2618] <Notice>: (Note ) CoreTime: Not setting time zone to America/New_York from NITZ
    Nov 14 12:09:05 unknown MobileMail[79] <Warning>: message data temporarily unavailable for messageInfo: (1199, 5)
    Nov 14 12:09:06 unknown kernel[0] <Debug>: AppleBCMWLANCore::powerOnSystem() : Powering On
    Nov 14 12:09:06 unknown kernel[0] <Debug>: AppleBCMWLANCore::powerOn(): stateFlags(24823)
    Nov 14 12:09:06 unknown kernel[0] <Debug>: AppleBCMWLANCore::powerOn(): Tearing down WoW mode
    Nov 14 12:09:06 unknown kernel[0] <Debug>: [95599.463363125]: AppleBCMWLANCore::systemWokenByWiFi(): Wake reason = wlan
    Nov 14 12:09:06 unknown kernel[0] <Debug>: AppleBCMWLANCore::handleDataPacket(): Wake up packet received: Data
    Nov 14 12:09:06 unknown kernel[0] <Debug>: Wakeup Packet: f0cba106a30c0050568952630800450001793a52400080063c29c0a80012c0a801a101bbccfffd1 21b7bd29b0c2c8018fe27ac9b00000101080a1785f7b13ca56e6f17030101403431c2351e7ee3052 e97886a25233433f1f1457a3c8b132c78c218cd508942bce0325b156c8c17222ab30cb4a99331401 b1d1bc0f1c4b8b21752b218d068570e097065786e60062250a26d351e541f5c291e6220cc053b5fd baa2d7abdbe7224eff815b5154dcb783dce8cd9a00a6da15cf4f5565355a80894f1d68cff527f54b 7ad7423fb8f39093a0ef40acf9c2de6eeb492f8f8ae20bd73b61b3a1b2df30cb982b941217fe8a34 08e01045804dc254da191d4b1f3a9d1cea7b9d192e61eda2473aed4a48f6c178c765b1f82c166521 e22a3a408893216761fa77b9388bcec9b2b8cd519ac9c8b053c00889c95b8003420dbb4561300eaf 6f6a59675db183260039f62eed7afb348d9fb3147238e116ad6ac4f1ebf5b22ee99b1cb92a5c3fb3 d43c25db5bfc761ea0feda538b53bedbaa0f948ac7c63f41822a8c5f882b400 (391 bytes)
    Nov 14 12:09:06 unknown kernel[0] <Debug>: AppleBCMWLAN Woke on same BSS:  @ 0xc1b50c00, BSSID = 5c:d9:98:02:9a:40, rssi = -47, rate = 54 (100%), channel =  7, encryption = 0xc, ap = 1, failures =   0, age = 2499, ssid[ 9] = "CMSFLWLAN"
    Nov 14 12:09:06 unknown kernel[0] <Debug>: AppleBCMWLANCore::configureWoWAssociatedExit(): Disabled the '!ICMP' packet filter
    Nov 14 12:09:06 unknown kernel[0] <Debug>: AppleBCMWLANCore::configureWoWAssociatedExit(): Disabled the '!ICMP' packet filter
    Nov 14 12:09:06 unknown kernel[0] <Debug>: AppleBCMWLANCore::configureWoWAssociatedExit(): Disabled packet filters
    Nov 14 12:09:06 unknown kernel[0] <Debug>: en0: BSSID changed to 5c:d9:98:02:9a:40
    Nov 14 12:09:06 unknown lockdownd[22] <Error>: 00386000 handle_watcher_service_start: Got a service sock 13 for hostID 30225B68-00D2-49E3-AE4A-38D7AA7B605B
    Nov 14 12:09:08 unknown timed[2618] <Notice>: (Note ) CoreTime: Want active time in 34.48hrs. Need active time in 117.81hrs.
    Nov 14 12:09:09 unknown MobileMail[79] <Warning>: message data temporarily unavailable for messageInfo: (1199, 5)
    Nov 14 12:09:18 unknown timed[2618] <Notice>: (Note ) CoreTime: Not setting system time to 11/14/2011 17:09:19 from GPS because time is unchanged
    Nov 14 12:09:23 unknown CommCenter[17] <Notice>: Telling CSI to go low power.
    Nov 14 12:09:25 unknown lockdownd[22] <Error>: 0173b000 __handle_watcher_service_start_block_invoke_1: Stopping heartbeat service for host 30225B68-00D2-49E3-AE4A-38D7AA7B605B
    Nov 14 12:09:29 unknown kernel[0] <Debug>: AppleBCMWLANCore::powerStateWillChangeToGated(): cap 0x8000, stateNum 0, dev 0x81609000 (this 0, provider 1)
    Nov 14 12:09:29 unknown kernel[0] <Debug>: AppleBCMWLANCore::powerOffSystem() : Powering Off and sleeping
    Nov 14 12:09:29 unknown kernel[0] <Debug>: AppleBCMWLANCore::powerOff(): fStateFlags(34822)
    Nov 14 12:09:29 unknown kernel[0] <Debug>: AppleBCMWLANCore::configureWoWAssociatedEntry(): Unicast IP filter enabled
    Nov 14 12:09:29 unknown kernel[0] <Debug>: AppleBCMWLANCore::configureWoWAssociatedEntry(): Enabled WOMP filter  0 (ID=103)
    Nov 14 12:09:29 unknown kernel[0] <Debug>: AppleBCMWLANCore::configureWoWAssociatedEntry(): Enabled WOMP filter  1 (ID=104)
    Nov 14 12:09:29 unknown kernel[0] <Debug>: AppleBCMWLANCore::configureWoWAssociatedEntry(): Enabled the '!ICMP' packet filter
    Nov 14 12:09:29 unknown kernel[0] <Debug>: AppleBCMWLAN Sleeping on BSS:   @ 0xc1b50c00, BSSID = 5c:d9:98:02:9a:40, rssi = -50, rate = 54 (100%), channel =  7, encryption = 0xc, ap = 1, failures =   0, age = 2523, ssid[ 9] = "CMSFLWLAN"
    Nov 14 12:09:29 unknown kernel[0] <Debug>: AppleBCMWLANBusInterfaceHSIC::prepareForWoW(): Sending disconnect command..
    Nov 14 12:09:29 unknown kernel[0] <Debug>: AppleBCMWLANBusInterfaceHSIC::sendDisconnectCommand()
    Nov 14 12:09:29 unknown kernel[0] <Debug>: AppleBCMWLANCore::powerOff(): Associated & WoW enabled, WiFi will remain up
    Nov 14 12:09:29 unknown kernel[0] <Debug>: virtual void AppleRGBOUT::do_power_state_change(): fSoft: 0 fHard: 0 swapBusy: 0  fController: 0 -> 0
    Nov 14 12:09:29 unknown kernel[0] <Debug>: AppleEmbeddedUSBArbitrator::setPowerState: calling handleUSBCableTypeChange from setPowerState
    Nov 14 12:09:29 unknown kernel[0] <Debug>: AppleSynopsysOTGDevice::handleUSBCableDisconnect
    Nov 14 12:09:29 unknown kernel[0] <Debug>: AppleBCMWLANCore::powerStateDidChangeToGated(): stateNum 0, pol 0x81609000 (this 0, provider 1)
    Nov 14 12:09:29 unknown kernel[0] <Debug>:
    Nov 14 12:11:25 unknown kernel[0] <Debug>: pmu wake events: menu
    Nov 14 12:11:25 unknown CommCenter[17] <Notice>: Telling CSI to exit low power.
    Nov 14 12:11:25 unknown SpringBoard[15] <Notice>: Posting 'com.apple.iokit.hid.displayStatus' notifyState=1
    Nov 14 12:11:25 unknown SpringBoard[15] <Notice>: MultitouchHID: detection mode: 255->3 (deferring until bootloaded)
    Nov 14 12:11:25 unknown SpringBoard[15] <Notice>: MultitouchHID: device bootloaded
    Nov 14 12:11:25 unknown SpringBoard[15] <Notice>: MultitouchHID: detection mode: 3->3
    Nov 14 12:11:25 unknown CLTM[12] <Error>: CLTM: resetting temps: now = 1321290685, last update = 1321290564
    Nov 14 12:11:25 unknown timed[2619] <Notice>: (Note ) CoreTime: Received network time zone "NITZ" with 342983483.00 -300 NO DST in 310
    Nov 14 12:11:25 unknown timed[2619] <Notice>: (Note ) CoreTime: Searching in NO DST time zone map for offset -300 and MCC 310
    Nov 14 12:11:25 unknown timed[2619] <Notice>: (Note ) CoreTime: Received timezone "America/New_York" from "NITZ"
    Nov 14 12:11:25 unknown timed[2619] <Notice>: (Note ) CoreTime: Not setting time zone to America/New_York from NITZ
    Nov 14 12:11:26 unknown kernel[0] <Debug>: virtual void AppleRGBOUT::do_power_state_change(): fSoft: 0 fHard: 1 swapBusy: 0  fController: 0 -> 0
    Nov 14 12:11:26 unknown kernel[0] <Debug>: AppleEmbeddedUSBArbitrator::setPowerState: calling handleUSBCableTypeChange from setPowerState
    Nov 14 12:11:26 unknown kernel[0] <Debug>: AppleSynopsysOTGDevice::handleUSBCableDisconnect
    Nov 14 12:11:26 unknown kernel[0] <Debug>: AppleSynopsysUSBEHCI[0xc143bc00]::UIMInitialize - HSIC ports enabled
    Nov 14 12:11:26 unknown kernel[0] <Debug>: AppleBCMWLANCore::powerStateWillChangeToGated(): cap 0x8000, stateNum 1, dev 0x81609000 (this 0, provider 1)
    Nov 14 12:11:26 unknown kernel[0] <Debug>: AppleBCMWLANCore::powerStateDidChangeToGated(): stateNum 1, pol 0x81609000 (this 0, provider 1)
    Nov 14 12:11:26 unknown kernel[0] <Debug>: AppleBCMWLANCore::powerStateDidChangeToGated(): No fBus, deferring reconnect bus...
    Nov 14 12:11:26 unknown kernel[0] <Debug>: AppleD1881PMUPowerSource: AppleUSBCableDetect 0
    Nov 14 12:11:26 unknown kernel[0] <Debug>: AppleD1881PMUPowerSource: AppleUSBCableType Detached
    Nov 14 12:11:26 unknown kernel[0] <Debug>: AppleBaseband::resetDetectInterrupt with 0
    Nov 14 12:11:26 unknown kernel[0] <Debug>: set_crc_notification_state 0
    Nov 14 12:11:26 unknown kernel[0] <Debug>: AppleBCMWLANCore::powerOnSystem() : Powering On
    Nov 14 12:11:26 unknown kernel[0] <Debug>: AppleBCMWLANCore::powerOn(): stateFlags(24823)
    Nov 14 12:11:26 unknown kernel[0] <Debug>: AppleBCMWLANCore::powerOn(): Tearing down WoW mode
    Nov 14 12:11:26 unknown kernel[0] <Debug>: AppleBCMWLAN Woke on same BSS:  @ 0xc1b50c00, BSSID = 5c:d9:98:02:9a:40, rssi = -48, rate = 54 (100%), channel =  7, encryption = 0xc, ap = 1, failures =   0, age = 2524, ssid[ 9] = "CMSFLWLAN"
    Nov 14 12:11:26 unknown kernel[0] <Debug>: AppleBCMWLANCore::configureWoWAssociatedExit(): Disabled the '!ICMP' packet filter
    Nov 14 12:11:26 unknown kernel[0] <Debug>: AppleBCMWLANCore::configureWoWAssociatedExit(): Disabled the '!ICMP' packet filter
    Nov 14 12:11:26 unknown kernel[0] <Debug>: AppleBCMWLANCore::configureWoWAssociatedExit(): Disabled packet filters
    Nov 14 12:11:26 unknown kernel[0] <Debug>: en0: BSSID changed to 5c:d9:98:02:9a:40
    Nov 14 12:11:27 unknown UserEventAgent[12] <Warning>: Unable to cancel system wake for 2011-11-14 12:11:17 -0500. IOPMCancelScheduledPowerEvent() returned 0xe00002c2
    Nov 14 12:11:27 unknown UserEventAgent[12] <Warning>: Unable to cancel system wake for 2011-11-14 12:11:17 -0500. IOPMCancelScheduledPowerEvent() returned 0xe00002c2
    Nov 14 12:11:27 unknown lockdownd[22] <Error>: 016b9000 handle_watcher_service_start: Got a service sock 13 for hostID 30225B68-00D2-49E3-AE4A-38D7AA7B605B
    Nov 14 12:11:28 unknown kernel[0] <Debug>: AppleKeyStore:cp_key_store_action(1)
    Nov 14 12:11:28 unknown kernel[0] <Debug>: AppleKeyStore:Sending lock change
    Nov 14 12:11:28 unknown timed[2619] <Notice>: (Note ) CoreTime: Want active time in 34.44hrs. Need active time in 117.78hrs.
    Nov 14 12:11:29 unknown configd[14] <Notice>: network configuration changed.
    Nov 14 12:11:29 unknown UserEventAgent[12] <Warning>: Unable to cancel system wake for 2011-11-14 12:11:17 -0500. IOPMCancelScheduledPowerEvent() returned 0xe00002c2
    Nov 14 12:11:30 unknown CommCenter[17] <Notice>: No more assertions for PDP context 0.  Returning it back to normal.
    Nov 14 12:11:30 unknown CommCenter[17] <Notice>: Scheduling PDP tear down timer for (342983790.026476) (current time == 342983490.026488)
    Nov 14 12:11:30 unknown wifid[29] <Error>: WiFi:[342983490.109759]: Client dataaccessd set type to background application
    Nov 14 12:11:31 unknown dataaccessd[54] <Notice>: 1127d0|CalDAV|Error|Could not find the current user principal. Found properties: [{
                  "DAV::displayname" = "[<CoreDAVLeafItem: 0xdea1ae0>]: DAV:displayname";
                  "DAV::principal-URL" = "[[<CoreDAVItemWithHrefChildItem: 0xf1b79b0>]: DAV:principal-URL]
      HREF: [[[<CoreDAVHrefItem: 0xdeb4b30>]: DAV:href]
      Payload as original URL: [/calendar/dav/[email protected]/user/]
      Payload as full URL: [https://[email protected]/calendar/dav/anyoneemail.com/user///[email protected]/calendar/dav/anyoneemail.com/user/]
      Base URL: [https://[email protected]/calendar/dav/anyoneemail.com/user///[email protected]/calendar/dav/anyoneemail.com/user/]]";
                  "urn:ietf:params:xml:ns:caldav:calendar-home-set" = "[[<CoreDAVItemWithHrefChildren: 0xf1b6f30>]: urn:ietf:params:xml:ns:caldavcalendar-home-set]
      Number of HREFs: [1]
      Unauthenticated: [(null)]";
                  "urn:ietf:params:xml:ns:caldav:calendar-user-address-set" = "[[<CoreDAVItemWithHrefChildren: 0xde8f6f0>]: urn:ietf:params:xml:ns:caldavcalendar-user-address-set]
      Number of HREFs: [2]
      Unauthenticated: [(null)]";
                  "urn:ietf:params:xml:ns:caldav:schedule-inbox-URL" = "[[<CoreDAVItemWithHrefChildItem: 0xde755f0>]: urn:ietf:params:xml:ns:caldavschedule-inbox-URL]
      HREF: [[[<CoreDAVHrefItem: 0xdeb4de0>]: DAV:href]
      Payload as original URL: [/calendar/dav/anyoneemail.com/inbox/]
      Payload as full URL: [https://[email protected]/calendar/dav/anyoneemail.com/inbox///[email protected]/calendar/dav/anyoneemail.com/inbox/]
      Base URL: [https://[email protected]/calendar/dav/anyoneemail.com/user///[email protected]/calendar/dav/anyoneemail.com/user/]]";
                  "urn:ietf:params:xml:ns:caldav:schedule-outbox-URL" = "[[<CoreDAVItemWithHrefChildItem: 0xdeac3a0>]: urn:ietf:params:xml:ns:caldavschedule-outbox-URL]
      HREF: [[[<CoreDAVHrefItem: 0xdeb7450>]: DAV:href]
      Payload as original URL: [/calendar/dav/anyoneemail.com/outbox/]
      Payload as full URL: [https://[email protected]/calendar/dav/anyoneemail.com/outbox///[email protected]/calendar/dav/anyoneemail.com/outbox/]
      Base URL: [https://[email protected]/calendar/dav/anyoneemail.com/user///[email protected]/calendar/dav/anyoneemail.com/user/]]";
    Nov 14 12:11:32 unknown dataaccessd[54] <Notice>: 1127d0|CalDAV|Error|There were some failures changing properties, according to the following response: [[[<CoreDAVResponseItem: 0xf2dfd20>]: DAV:response | Number of HREFs: [1]| Status: [(null)]| Number of prop stats: [1]| Error: [(null)]| Response description: [(null)]| Location: [(null)]]].
    Nov 14 12:11:34 unknown UserEventAgent[12] <Warning>: Unable to cancel system wake for 2011-11-14 12:11:19 -0500. IOPMCancelScheduledPowerEvent() returned 0xe00002c2
    Nov 14 12:11:38 unknown timed[2619] <Notice>: (Note ) CoreTime: Not setting system time to 11/14/2011 17:11:39 from GPS because time is unchanged
    Nov 14 12:11:42 unknown wifid[29] <Error>: WiFi:[342983502.660924]: Client itunesstored is background application
    Nov 14 12:12:29 unknown wifid[29] <Error>: WiFi:[342983549.925022]: Disable WoW requested by "apsd"
    Nov 14 12:12:29 unknown wifid[29] <Error>: WiFi:[342983549.927995]: Disable WoW requested by "dataaccessd"
    Nov 14 12:12:37 unknown SpringBoard[15] <Notice>: Posting 'com.apple.iokit.hid.displayStatus' notifyState=0
    Nov 14 12:12:37 unknown SpringBoard[15] <Notice>: MultitouchHID: detection mode: 3->255
    Nov 14 12:13:38 unknown profiled[2629] <Notice>: (Note ) profiled: Service starting...
    Nov 14 12:13:38 unknown profiled[2629] <Notice>: (Note ) profiled: Locking device
    Nov 14 12:13:39 unknown kernel[0] <Debug>: AppleKeyStore:Sending lock change
    Nov 14 12:13:43 unknown CommCenter[17] <Notice>: Telling CSI to go low power.
    Nov 14 12:13:44 unknown lockdownd[22] <Error>: 016b9000 __handle_watcher_service_start_block_invoke_1: Stopping heartbeat service for host 30225B68-00D2-49E3-AE4A-38D7AA7B605B
    Nov 14 12:13:48 unknown kernel[0] <Debug>: AppleKeyStore:timer fired
    Nov 14 12:13:48 unknown kernel[0] <Debug>: AppleKeyStore:cp_key_store_action(0)
    Nov 14 12:13:48 unknown kernel[0] <Debug>: AppleKeyStore:Removing timer
    Nov 14 12:13:48 unknown kernel[0] <Debug>: AppleKeyStore:Sending lock change
    Nov 14 12:13:48 unknown kernel[0] <Debug>: AppleBCMWLANCore::powerStateWillChangeToGated(): cap 0x8000, stateNum 0, dev 0x81609000 (this 0, provider 1)
    Nov 14 12:13:48 unknown kernel[0] <Debug>: AppleBCMWLANCore::powerOffSystem() : Powering Off and sleeping
    Nov 14 12:13:48 unknown kernel[0] <Debug>: AppleBCMWLANCore::powerOff(): fStateFlags(34822)
    Nov 14 12:13:48 unknown kernel[0] <Debug>: AppleBCMWLANCore::configureWoWAssociatedEntry(): Unicast IP filter enabled
    Nov 14 12:13:48 unknown kernel[0] <Debug>: AppleBCMWLANCore::configureWoWAssociatedEntry(): Enabled WOMP filter  0 (ID=103)
    Nov 14 12:13:48 unknown kernel[0] <Debug>: AppleBCMWLANCore::configureWoWAssociatedEntry(): Enabled WOMP filter  1 (ID=104)
    Nov 14 12:13:48 unknown kernel[0] <Debug>: AppleBCMWLANCore::configureWoWAssociatedEntry(): Enabled the '!ICMP' packet filter
    Nov 14 12:13:48 unknown kernel[0] <Debug>: AppleBCMWLAN Sleeping on BSS:   @ 0xc1b50c00, BSSID = 5c:d9:98:02:9a:40, rssi = -42, rate = 54 (100%), channel =  7, encryption = 0xc, ap = 1, failures =   0, age = 2667, ssid[ 9] = "CMSFLWLAN"
    Nov 14 12:13:48 unknown kernel[0] <Debug>: AppleBCMWLANBusInterfaceHSIC::prepareForWoW(): Sending disconnect command..
    Nov 14 12:13:48 unknown kernel[0] <Debug>: AppleBCMWLANBusInterfaceHSIC::sendDisconnectCommand()
    Nov 14 12:13:48 unknown kernel[0] <Debug>: AppleBCMWLANCore::powerOff(): Associated & WoW enabled, WiFi will remain up
    Nov 14 12:13:48 unknown kernel[0] <Debug>: virtual void AppleRGBOUT::do_power_state_change(): fSoft: 0 fHard: 0 swapBusy: 0  fController: 0 -> 0
    Nov 14 12:13:48 unknown kernel[0] <Debug>: AppleEmbeddedUSBArbitrator::setPowerState: calling handleUSBCableTypeChange from setPowerState
    Nov 14 12:13:48 unknown kernel[0] <Debug>: AppleSynopsysOTGDevice::handleUSBCableDisconnect
    Nov 14 12:13:48 unknown kernel[0] <Debug>: AppleBCMWLANCore::powerStateDidChangeToGated(): stateNum 0, pol 0x81609000 (this 0, provider 1)
    Nov 14 12:13:48 unknown kernel[0] <Debug>:
    Nov 14 12:14:20 unknown CommCenter[17] <Notice>: Telling CSI to exit low power.
    Nov 14 12:14:20 unknown SpringBoard[15] <Notice>: Posting 'com.apple.iokit.hid.displayStatus' notifyState=1
    Nov 14 12:14:20 unknown kernel[0] <Debug>: pmu wake events: menu
    Nov 14 12:14:20 unknown kernel[0] <Debug>: virtual void AppleRGBOUT::do_power_state_change(): fSoft: 0 fHard: 1 swapBusy: 0  fController: 0 -> 0
    Nov 14 12:14:20 unknown kernel[0] <Debug>: AppleEmbeddedUSBArbitrator::setPowerState: calling handleUSBCableTypeChange from setPowerState
    Nov 14 12:14:20 unknown kernel[0] <Debug>: AppleSynopsysOTGDevice::handleUSBCableDisconnect
    Nov 14 12:14:20 unknown kernel[0] <Debug>: AppleSynopsysUSBEHCI[0xc199f000]::UIMInitialize - HSIC ports enabled
    Nov 14 12:14:20 unknown kernel[0] <Debug>: AppleBCMWLANCore::powerStateWillChangeToGated(): cap 0x8000, stateNum 1, dev 0x81609000 (this 0, provider 1)
    Nov 14 12:14:20 unknown kernel[0] <Debug>: AppleBCMWLANCore::powerStateDidChangeToGated(): stateNum 1, pol 0x81609000 (this 0, provider 1)
    Nov 14 12:14:20 unknown kernel[0] <Debug>: AppleBCMWLANCore::powerStateDidChangeToGated(): No fBus, deferring reconnect bus...
    Nov 14 12:14:20 unknown SpringBoard[15] <Notice>: MultitouchHID: detection mode: 255->3 (deferring until bootloaded)
    Nov 14 12:14:20 unknown SpringBoard[15] <Notice>: MultitouchHID: device bootloaded
    Nov 14 12:14:20 unknown SpringBoard[15] <Notice>: MultitouchHID: detection mode: 3->3
    Nov 14 12:14:20 unknown timed[2631] <Notice>: (Note ) CoreTime: Received network time zone "NITZ" with 342983659.00 -300 NO DST in 310
    Nov 14 12:14:20 unknown timed[2631] <Notice>: (Note ) CoreTime: Searching in NO DST time zone map for offset -300 and MCC 310
    Nov 14 12:14:20 unknown timed[2631] <Notice>: (Note ) CoreTime: Received timezone "America/New_York" from "NITZ"
    Nov 14 12:14:20 unknown timed[2631] <Notice>: (Note ) CoreTime: Not setting time zone to America/New_York from NITZ
    Nov 14 12:14:21 unknown kernel[0] <Debug>: AppleD1881PMUPowerSource: AppleUSBCableDetect 0
    Nov 14 12:14:21 unknown kernel[0] <Debug>: AppleD1881PMUPowerSource: AppleUSBCableType Detached
    Nov 14 12:14:21 unknown kernel[0] <Debug>: AppleBaseband::resetDetectInterrupt with 0
    Nov 14 12:14:21 unknown kernel[0] <Debug>: set_crc_notification_state 0
    Nov 14 12:14:21 unknown kernel[0] <Debug>: AppleBCMWLANCore::powerOnSystem() : Powering On
    Nov 14 12:14:21 unknown kernel[0] <Debug>: AppleBCMWLANCore::powerOn(): stateFlags(24823)
    Nov 14 12:14:21 unknown kernel[0] <Debug>: AppleBCMWLANCore::powerOn(): Tearing down WoW mode
    Nov 14 12:14:21 unknown kernel[0] <Debug>: AppleBCMWLAN Woke on same BSS:  @ 0xc1b50c00, BSSID = 5c:d9:98:02:9a:40, rssi = -40, rate = 54 (100%), channel =  7, encryption = 0xc, ap = 1, failures =   0, age = 2668, ssid[ 9] = "CMSFLWLAN"
    Nov 14 12:14:21 unknown kernel[0] <Debug>: AppleBCMWLANCore::configureWoWAssociatedExit(): Disabled the '!ICMP' packet filter
    Nov 14 12:14:21 unknown kernel[0] <Debug>: AppleBCMWLANCore::configureWoWAssociatedExit(): Disabled the '!ICMP' packet filter
    Nov 14 12:14:21 unknown kernel[0] <Debug>: AppleBCMWLANCore::configureWoWAssociatedExit(): Disabled packet filters
    Nov 14 12:14:21 unknown kernel[0] <Debug>: en0: BSSID changed to 5c:d9:98:02:9a:40
    Nov 14 12:14:21 unknown lockdownd[22] <Error>: 016b9000 handle_watcher_service_start: Got a service sock 13 for hostID 30225B68-00D2-49E3-AE4A-38D7AA7B605B
    Nov 14 12:14:22 unknown profiled[2629] <Notice>: (Note ) profiled: Device unlock notification received
    Nov 14 12:14:23 unknown kernel[0] <Debug>: AppleKeyStore:cp_key_store_action(1)
    Nov 14 12:14:23 unknown kernel[0] <Debug>: AppleKeyStore:Sending lock change
    Nov 14 12:14:23 unknown timed[2631] <Notice>: (Note ) CoreTime: Want active time in 34.39hrs. Need active time in 117.73hrs.
    Nov 14 12:14:33 unknown Preferences[1862] <Warning>: -[VPNConnectionStore reloadVPN]: The active VPN configuration has changed from  to (null)
    Nov 14 12:14:33 unknown timed[2631] <Notice>: (Note ) CoreTime: Not setting system time to 11/14/2011 17:14:34 from GPS because time is unchanged
    Nov 14 12:14:34 unknown Preferences[1862] <Warning>: -[VPNBundleController _vpnConfigurationChanged:] (0x13d7b0:<VPNBundleController: 0x13d7b0>): _serviceCount(0), serviceCount(0), toggleInRootMenu(0), RootMenuItem(1)
    Nov 14 12:14:34 unknown com.apple.misd[2635] <Notice>: allowing special port forwarding for test fixtures
    Nov 14 12:14:41 unknown Preferences[1862] <Warning>: BTM: attaching to BTServer
    Nov 14 12:14:41 unknown Preferences[1862] <Warning>: BTM: posting notification BluetoothAvailabilityChangedNotification
    Nov 14 12:14:44 unknown Preferences[1862] <Warning>: Should show voicemail? YES
    Nov 14 12:14:44 unknown Preferences[1862] <Warning>: Should show voicemail? YES
    Nov 14 12:14:44 unknown Preferences[1862] <Warning>: Should show voicemail? YES
    Nov 14 12:14:44 unknown Preferences[1862] <Warning>: Should show voicemail? YES
    Nov 14 12:15:01 unknown CommCenter[17] <Notice>: removing received message 2147483663
    Nov 14 12:15:22 unknown profiled[2629] <Notice>: (Note ) profiled: Idled.
    Nov 14 12:15:22 unknown profiled[2629] <Notice>: (Note ) profiled: Service stopping.
    Nov 14 12:15:38 unknown kernel[0] <Debug>: launchd[2643] Builtin profile: container2 (sandbox)
    Nov 14 12:15:38 unknown kernel[0] <Debug>: launchd[2643] Container: /private/var/mobile/Applications/E45DB0BB-3802-413A-B858-D5EE2F5C8DFF [69] (sandbox)
    Nov 14 12:15:38 unknown wifid[29] <Error>: WiFi:[342983738.764213]: Client itunesstored is background application
    Nov 14 12:15:41 unknown UIKitApplication:com.apple.iBooks[0xdd89][2643] <Notice>: DictinaryServices: Dictionary cache was updated
    Nov 14 12:19:40 unknown kernel[0] <Debug>: 096088.069853 hsic-baseband::portActionGated: start device 0x00020001 (bus 1 port 2) completed with 0xe00002ed, retrying in 50ms
    Nov 14 12:20:50 unknown wifid[29] <Error>: WiFi:[342984050.417001]: Client dataaccessd set type to background application
    Nov 14 12:21:11 unknown lockdownd[22] <Error>: 00386000 __handle_watcher_service_start_block_invoke_1: Stopping heartbeat service for host 30225B68-00D2-49E3-AE4A-38D7AA7B605B
    Nov 14 12:21:11 unknown com.apple.mobile.lockdown[22] <Notice>: Could not shutdown SSL connection: -9806
    Nov 14 12:21:53 unknown wifid[29] <Error>: WiFi:[342984113.211059]: Client itunesstored is background application
    Nov 14 12:22:06 unknown dataaccessd[54] <Notice>: 1127d0|CalDAV|Error|connection died with error Error Domain=NSURLErrorDomain Code=-1001 "The request timed out." UserInfo=0x1934d0 {NSErrorFailingURLStringKey=https://[email protected]/calendar/dav/anyoneemail.com/user///[email protected]/calendar/dav/anyoneemail.com/user/, NSErrorFailingURLKey=https://[email protected]/calendar/dav/anyoneemail.com/user///[email protected]/calendar/dav/anyoneemail.com/user/, NSLocalizedDescription=The request timed out., NSUnderlyingError=0x108be0 "The request timed out."} 0xde94790
    Nov 14 12:22:06 unknown dataaccessd[54] <Notice>: 1127d0|CalDAV|Error|Error refreshing properties for account: Error Domain=NSURLErrorDomain Code=-1001 "The request timed out." UserInfo=0x1934d0 {NSErrorFailingURLStringKey=https://[email protected]/calendar/dav/anyoneemail.com/user///[email protected]/calendar/dav/anyoneemail.com/user/, NSErrorFailingURLKey=https://[email protected]/calendar/dav/anyoneemail.com/user///[email protected]/calendar/dav/anyoneemail.com/user/, NSLocalizedDescription=The request timed out., NSUnderlyingError=0x108be0 "The request timed out."}
    Nov 14 12:22:06 unknown dataaccessd[54] <Notice>: 1127d0|CalDAV|Warn |CalDAV refresh task failed wih error Error Domain=NSURLErrorDomain Code=-1001 "The request timed out." UserInfo=0x1934d0 {NSErrorFailingURLStringKey=https://[email protected]/calendar/dav/anyoneemail.com/user///[email protected]/calendar/dav/anyoneemail.com/user/, NSErrorFailingURLKey=https://[email protected]/calendar/dav/anyoneemail.com/user///[email protected]/calendar/dav/anyoneemail.com/user/, NSLocalizedDescription=The request timed out., NSUnderlyingError=0x108be0 "The request timed out."}
    Nov 14 12:22:06 unknown dataaccessd[54] <Notice>: 1127d0|CalDAV|Warn |==== CalDAV refresh FAILED for "email" (8B3B7412-5AB7-4636-85FC-0613452101C4): Error Domain=NSURLErrorDomain Code=-1001 "The request timed out." UserInfo=0x1934d0 {NSErrorFailingURLStringKey=https://[email protected]/calendar/dav/anyoneemail.com/user///[email protected]/calendar/dav/anyoneemail.com/user/, NSErrorFailingURLKey=https://[email protected]/calendar/dav/anyoneemail.com/user///[email protected]/calendar/dav/anyoneemail.com/user/, NSLocalizedDescription=The request timed out., NSUnderlyingError=0x108be0 "The request timed out."}.
    Nov 14 12:22:06 unknown dataaccessd[54] <Notice>: 1127d0|CalDAV|Error|CoreDAVPropFindTask failed: Error Domain=NSURLErrorDomain Code=-1001 "The request timed out." UserInfo=0x1934d0 {NSErrorFailingURLStringKey=https://[email protected]/calendar/dav/anyoneemail.com/user///[email protected]/calendar/dav/anyoneemail.com/user/, NSErrorFailingURLKey=https://[email protected]/calendar/dav/anyoneemail.com/user///[email protected]/calendar/dav/anyoneemail.com/user/, NSLocalizedDescription=The request timed out., NSUnderlyingError=0x108be0 "The request timed out."}
    Nov 14 12:23:24 unknown kernel[0] <Debug>: launchd[2659] Builtin profile: PasteBoard (sandbox)
    Nov 14 12:23:25 unknown SpringBoard[15] <Notice>: MultitouchHID: detection mode: 3->1
    Nov 14 12:23:25 unknown MobileSMS[117] <Error>: clip: empty path.
    Nov 14 12:23:25 unknown UIKitApplication:com.apple.MobileSMS[0x1a48][117] <Notice>: Nov 14 12:23:25 users-iPhone MobileSMS[117] <Error>: clip: empty path.
    Nov 14 12:23:26 unknown MobileMail[79] <Notice>: d65c270|EAS|Error|connection died with error Error Domain=NSURLErrorDomain Code=-1001 "The request timed out." UserInfo=0xd6ebe90 {NSErrorFailingURLStringKey=https://email.website.com/Microsoft-Server-ActiveSync?User=user&DeviceId=ApplC39 GKPU5DTDK&DeviceType=iPhone&Cmd=MoveItems, NSErrorFailingURLKey=https://email.website.com/Microsoft-Server-ActiveSync?User=user&DeviceId=ApplC39 GKPU5DTDK&DeviceType=iPhone&Cmd=MoveItems, NSLocalizedDescription=The request timed out., NSUnderlyingError=0xd6c7a50 "The request timed out."} 0x112d18d0
    Nov 14 12:23:26 unknown MobileMail[79] <Notice>: d65c270|EAS|Error|ASMoveItemsTask failed: Error Domain=NSURLErrorDomain Code=-1001 "The request timed out." UserInfo=0xd6ebe90 {NSErrorFailingURLStringKey=https://email.website.com/Microsoft-Server-ActiveSync?User=user&DeviceId=ApplC39 GKPU5DTDK&DeviceType=iPhone&Cmd=MoveItems, NSErrorFailingURLKey=https://email.website.com/Microsoft-Server-ActiveSync?User=user&DeviceId=ApplC39 GKPU5DTDK&DeviceType=iPhone&Cmd=MoveItems, NSLocalizedDescription=The request timed out., NSUnderlyingError=0xd6c7a50 "The request timed out."}
    Nov 14 12:23:29 unknown SpringBoard[15] <Notice>: MultitouchHID: detection mode: 1->3
    Nov 14 12:23:29 unknown MobileSMS[117] <Warning>: Trying to remove already removed image
    Nov 14 12:23:33 unknown MobileSMS[117] <Error>: CGAffineTransformInvert: singular matrix.
    Nov 14 12:23:33 unknown UIKitApplication:com.apple.MobileSMS[0x1a48][117] <Notice>: Nov 14 12:23:33 users-iPhone MobileSMS[117] <Error>: CGAffineTransformInvert: singular matrix.
    Nov 14 12:23:40 unknown imagent[49] <Warning>: [Warning] Async loading of bag failed: Error Domain=NSURLErrorDomain Code=-1001 "The request timed out." UserInfo=0xeeb64c0 {NSErrorFailingURLStringKey=http://init-p01md.apple.com/bag, NSErrorFailingURLKey=http://init-p01md.apple.com/bag, NSLocalizedDescription=The request timed out., NSUnderlyingError=0xee9e340 "The request timed out."}
    Nov 14 12:23:40 unknown imagent[49] <Warning>: [Warning] Bag loading failed! Error (NSURLErrorDomain:-1001): The request timed out. http://init-p01md.apple.com/bag
    Nov 14 12:23:45 unknown SpringBoard[15] <Notice>: Connection to the change hub got interrupted.
    Nov 14 12:23:49 unknown wifid[29] <Error>: WiFi:[342984229.632067]: Client itunesstored is background application
    Nov 14 12:24:28 unknown UserEventAgent[12] <Warning>: Unable to cancel system wake for 2011-11-14 12:24:18 -0500. IOPMCancelScheduledPowerEvent() returned 0xe00002c2
    Nov 14 12:24:29 unknown UserEventAgent[12] <Warning>: Unable to cancel system wake for 2011-11-14 12:24:18 -0500. IOPMCancelScheduledPowerEvent() returned 0xe00002c2
    Nov 14 12:24:29 unknown UserEventAgent[12] <Warning>: Unable to cancel system wake for 2011-11-14 12:24:18 -0500. IOPMCancelScheduledPowerEvent() returned 0xe00002c2
    Nov 14 12:24:31 unknown UserEventAgent[12] <Warning>: Unable to cancel system wake for 2011-11-14 12:24:18 -0500. IOPMCancelScheduledPowerEvent() returned 0xe00002c2
    Nov 14 12:24:31 unknown UserEventAgent[12] <Warning>: Unable to cancel system wake for 2011-11-14 12:24:21 -0500. IOPMCancelScheduledPowerEvent() returned 0xe00002c2
    Nov 14 12:24:31 unknown UserEventAgent[12] <Warning>: Unable to cancel system wake for 2011-11-14 12:24:21 -0500. IOPMCancelScheduledPowerEvent() returned 0xe00002c2
    Nov 14 12:24:36 unknown UserEventAgent[12] <Warning>: Unable to cancel system wake for 2011-11-14 12:24:21 -0500. IOPMCancelScheduledPowerEvent() returned 0xe00002c2
    Nov 14 12:24:47 unknown MobileMail[79] <Notice>: d65c270|EAS|Error|connection died with error Error Domain=NSURLErrorDomain Code=-1001 "The request timed out." UserInfo=0x113bdf50 {NSErrorFailingURLStringKey=https://email.website.com/Microsoft-Server-ActiveSync?User=user&DeviceId=ApplC39 GKPU5DTDK&DeviceType=iPhone&Cmd=MoveItems, NSErrorFailingURLKey=https://email.website.com/Microsoft-Server-ActiveSync?User=user&DeviceId=ApplC39 GKPU5DTDK&DeviceType=iPhone&Cmd=MoveItems, NSLocalizedDescription=The request timed out., NSUnderlyingError=0x113b5750 "The request timed out."} 0x1127a260
    Nov 14 12:24:47 unknown MobileMail[79] <Notice>: d65c270|EAS|Error|ASMoveItemsTask failed: Error Domain=NSURLErrorDomain Code=-1001 "The request timed out." UserInfo=0x113bdf50 {NSErrorFailingURLStringKey=https://email.website.com/Microsoft-Server-ActiveSync?User=user&DeviceId=ApplC39 GKPU5DTDK&DeviceType=iPhone&Cmd=MoveItems, NSErrorFailingURLKey=https://email.website.com/Microsoft-Server-ActiveSync?User=user&DeviceId=ApplC39 GKPU5DTDK&DeviceType=iPhone&Cmd=MoveItems, NSLocalizedDescription=The request timed out., NSUnderlyingError=0x113b5750 "The request timed out."}
    Nov 14 12:26:07 unknown MobileMail[79] <Notice>: d65c270|EAS|Error|connection died with error Error Domain=NSURLErrorDomain Code=-1001 "The request timed out." UserInfo=0x2c7230 {NSErrorFailingURLStringKey=https://email.website.com/Microsoft-Server-ActiveSync?User=user&DeviceId=ApplC39 GKPU5DTDK&DeviceType=iPhone&Cmd=MoveItems, NSErrorFailingURLKey=https://email.website.com/Microsoft-Server-ActiveSync?User=user&DeviceId=ApplC39 GKPU5DTDK&DeviceType=iPhone&Cmd=MoveItems, NSLocalizedDescription=The request timed out., NSUnderlyingError=0x2a0b10 "The request timed out."} 0x11257260
    Nov 14 12:26:07 unknown MobileMail[79] <Notice>: d65c270|EAS|Error|ASMoveItemsTask failed: Error Domain=NSURLErrorDomain Code=-1001 "The request timed out." UserInfo=0x2c7230 {NSErrorFailingURLStringKey=https://email.website.com/Microsoft-Server-ActiveSync?User=user&DeviceId=ApplC39 GKPU5DTDK&DeviceType=iPhone&Cmd=MoveItems, NSErrorFailingURLKey=https://email.website.com/Microsoft-Server-ActiveSync?User=user&DeviceId=ApplC39 GKPU5DTDK&DeviceType=iPhone&Cmd=MoveItems, NSLocalizedDescription=The request timed out., NSUnderlyingError=0x2a0b10 "The request timed out."}
    Nov 14 12:26:31 unknown imagent[49] <Warning>: [Warning] Async loading of bag failed: Error Domain=NSURLErrorDomain Code=-1001 "The request timed out." UserInfo=0x19b500 {NSErrorFailingURLStringKey=http://init-p01md.apple.com/bag, NSErrorFailingURLKey=http://init-p01md.apple.com/bag, NSLocalizedDescription=The request timed out., NSUnderlyingError=0x18d740 "The request timed out."}
    Nov 14 12:26:31 unknown imagent[49] <Warning>: [Warning] Bag loading failed! Error (NSURLErrorDomain:-1001): The request timed out. http://init-p01md.apple.com/bag
    Nov 14 12:31:45 unknown kernel[0] <Debug>: launchd[2681] Builtin profile: container (sandbox)
    Nov 14 12:31:45 unknown kernel[0] <Debug>: launchd[2681] Container: /private/var/mobile/Applications/DD219E23-801C-44FF-A939-FC1E23D7B5CD [69] (sandbox)
    Nov 14 12:31:48 unknown Ping[2681] <Warning>: WARNING: Using legacy cell layout due to delegate implementation of tableView:accessoryTypeForRowWithIndexPath: in <myping: 0x161090>.  Please remove your implementation of this method and set the cell properties accessoryType and/or editingAccessoryType to move to the new cell layout behavior.  This method will no longer be called in a future release.
    Nov 14 12:31:49 unknown MobileMail[79] <Notice>: d65c270|EAS|Error|connection died with error Error Domain=NSURLErrorDomain Code=-1001 "The request timed out." UserInfo=0x11344bc0 {NSErrorFailingURLStringKey=https://email.website.com/Microsoft-Server-ActiveSync?User=user&DeviceId=ApplC39 GKPU5DTDK&DeviceType=iPhone&Cmd=MoveItems, NSErrorFailingURLKey=https://email.website.com/Microsoft-Server-ActiveSync?User=user&DeviceId=ApplC39 GKPU5DTDK&DeviceType=iPhone&Cmd=MoveItems, NSLocalizedDescription=The request timed out., NSUnderlyingError=0x113fb400 "The request timed out."} 0x2f3eb0
    Nov 14 12:31:49 unknown MobileMail[79] <Notice>: d65c270|EAS|Error|ASMoveItemsTask failed: Error Domain=NSURLErrorDomain Code=-1001 "The request timed out." UserInfo=0x11344bc0 {NSErrorFailingURLStringKey=https://email.website.com/Microsoft-Server-ActiveSync?User=user&DeviceId=ApplC39 GKPU5DTDK&DeviceType=iPhone&Cmd=MoveItems, NSErrorFailingURLKey=https://email.website.com/Microsoft-Server-ActiveSync?User=user&DeviceId=ApplC39 GKPU5DTDK&DeviceType=iPhone&Cmd=MoveItems, NSLocalizedDescription=The request timed out., NSUnderlyingError=0x113fb400 "The request timed out."}
    Nov 14 12:32:48 unknown SpringBoard[15] <Notice>: Posting 'com.apple.iokit.hid.displayStatus' notifyState=0
    Nov 14 12:32:48 unknown SpringBoard[15] <Notice>: MultitouchHID: detection mode: 3->255
    Nov 14 12:33:01 unknown SpringBoard[15] <Notice>: Posting 'com.apple.iokit.hid.displayStatus' notifyState=1
    Nov 14 12:33:01 unknown SpringBoard[15] <Notice>: MultitouchHID: detection mode: 255->3 (deferring until bootloaded)
    Nov 14 12:33:01 unknown SpringBoard[15] <Notice>: MultitouchHID: device bootloaded
    Nov 14 12:33:01 unknown SpringBoard[15] <Notice>: MultitouchHID: detection mode: 3->3
    Nov 14 12:33:02 unknown kernel[0] <Debug>: set_crc_notification_state 0
    Nov 14 12:33:11 unknown com.apple.misd[2685] <Notice>: allowing special port forwarding for test fixtures
    Nov 14 12:33:13 unknown profiled[2686] <Notice>: (Note ) profiled: Service starting...
    Nov 14 12:33:13 unknown Preferences[1862] <Warning>: loadAPTableCellImages: loading images
    Nov 14 12:33:15 unknown Preferences[1862] <Warning>: -[APSettingsController specifiers]: CMSFLWLAN: _canForget(1), _canSetAutoJoin(0), _canSetAutoLogin(0)
    Nov 14 12:33:23 unknown kernel[0] <Debug>: AppleD1881PMUPowerSource: AppleUSBCableDetect 1
    Nov 14 12:33:23 unknown kernel[0] <Debug>: AppleD1881PMUPowerSource: AppleUSBCableType USBHost
    Nov 14 12:33:23 unknown kernel[0] <Debug>: AppleSynopsysOTGDevice::handleUSBReset
    Nov 14 12:33:23 unknown kernel[0] <Debug>: launchd[2688] Builtin profile: ptpd (sandbox)
    Nov 14 12:33:23 unknown lockdownd[22] <Error>: libMobileGestalt copyMobileEquipmentIdentifier: No MEID in CT mobile equipment info dictionary - <CFBasicHash 0xfe164d0 [0x3fced630]>{type = mutable dict, count = 5,
              entries =>
                        1 : <CFString 0xfe2dc20 [0x3fced630]>{contents = "kCTMobileEquipmentInfoCurrentSubscriberId"} = <CFString 0xfe16770 [0x3fced630]>{contents = "310410438874235"}
                        2 : <CFString 0xfe1cd20 [0x3fced630]>{contents = "kCTMobileEquipmentInfoCurrentMobileId"} = <CFString 0xfe2cd90 [0x3fced630]>{contents = "012937000519404"}
                        4 : <CFString 0xfe2e1b0 [0x3fced630]>{contents = "kCTMobileEquipmentInfoICCID"} = <CFString 0xfe2e1e0 [0x3fced630]>{contents = "89014103254388742359"}
                        11 : <CFString 0xfe2d750 [0x3fced630]>{contents = "kCTMobileEquipmentInfoIMEI"} = <CFString 0xfe2cd90 [0x3fced630]>{contents = "012937000519404"}
                        12 : <CFString 0xfe2e280 [0x3fced630]>{contents = "kCTMobileEquipmentInfoIMSI"} = <CFString 0xfe16770 [0x3fced630]>{contents = "310410438874235"}
    Nov 14 12:33:23 unknown lockdownd[22] <Error>: 00386000 copy_meid: MobileGestalt failed to provide an MEID but returned no error (?)
    Nov 14 12:33:24 unknown atc[2690] <Warning>: Error: Connection invalid
    Nov 14 12:33:28 unknown ptpd[2688] <Notice>: PTP interface has been activated at high speed.
    Nov 14 12:33:37 unknown lockdownd[22] <Error>: 0173b000 special_case_get_domain: NN: checking BT MAC Address reported back f0:cb:a1:06:a3:0d
    Nov 14 12:33:38 users-iPhone mc_mobile_tunnel[2700] <Notice>: (Note ) MC: mc_mobile_tunnel starting.
    Nov 14 12:33:38 users-iPhone mc_mobile_tunnel[2700] <Notice>: (Note ) MC: mc_mobile_tunnel shutting down.

    *228 option 2 might work. All phones can be different.

Maybe you are looking for

  • How can i use different language in Forms9i or 10g

    Hi, I want to use two languages at a time on forms9i.So i have Configured my NLS_LANG parameter on Form 9i by REGEDIT. and also install that others language setup by REGIONAL SETTING.After it on run time i am abled to insert data in other language an

  • Is it possible to play Sculpture using my Roland GR-55 synth?

    I'm connecting the CakeWalk UM-1G MIDI USB Interface to connect my Roland GR-55 Guitar Synth to Logic Pro 9.1.7 with the purpose of controlling or being able to access the sound capabilities of Sculpture and record them as audio tracks. Can anyone sh

  • E65 as a modem: UMTS or WLAN?

    Hi, If I connect the E65 to my laptop, using it as a modem, and i log it in to my home wlan (but it's still connected to mobile umts service), how can I determine whether it connects to the internet via the wlan or via umts? How do I tell the phone t

  • Disallow PGI Reversal of STO, If MIGO made against Outbound dly

    Hello all, Please guide me in solving this query it is STO between 2 plants under same company code (1) STO Pur Order made for 100 Pcs (2) [vl10b & vl02n] - partial goods issue made i.e., for 50 Pcs (3) [MIGO]- Goods Receipt made with reference to th

  • Show HTML-file as Portlet ?

    We are using Portal 3.0.6. Using the HTML-portlet you have to cut and paste HTML code. Is there any easier way (~ browse file) to add an HTML-file as a Portlet to an region? null