WF mailer is not sending mail.

Hi,
WF mailer is not sending mail. earlier it was sending email. Nothing change in configuration.
Select * from WF_NOTIFICATIONS
mail_status is showing FAILED.
Earlier password reset was working also.
Please advice.

Please mention the details of the application release, database version and OS.
Please check the workflow log file as well as the database log for any details about the errors.
Also, see old threads which discuss the same topic.
http://forums.oracle.com/forums/search.jspa?threadID=&q=Workflow+not+sending+emails&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
http://forums.oracle.com/forums/search.jspa?threadID=&q=Workflow+not+working&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
Thanks,
Hussein

Similar Messages

Mail will not send mail, only receive.

I have spent the majority of today re-installing OS X and all necessary updates, music, data after the death of a hard drive. Luckily everything went perfectly, except for the same problem I had with Mail even before the 1st hard drive died. Mail will not send mail, only receive.
All efforts time out and give me this message: "The connection to the server mail.earthlink.net on port 25 timed out"
Mail used to send messages, but stopped suddenly in 2004 and has yet to start again. Any idea guys?! I can't figure it out, under Account settings I have necessary fields filled in: Outgoing Mail Server (SMTP) is set to "mail.earthlink.net", Server Port is set to 25, and Authentication drop menu is set to None.
Any help would be greatly appreciated.
--DANIEL

This is NOT a problem with Mail or OS X. This is an incorrect settings problem - garbage in = garbage out and this information is certainly available at Earthlink's website and Earthlink also provides technical support.
Earthlink has an authenticated SMTP server they changed to long ago.
SMTP Server: smtpauth.earthlink.net
Server Port: 587 but 25 should work if you are using Earthlink as your internet service provider for connecting to the internet.
Use SSL: Off or not selected.
Authentication: MD5 Challenge-Response
User Name: Your ENTIRE Earthlink email address.
Password: The account's password - the same password used to check the incoming mail server for new messages.

Can receive mail but not send mail

Hey, I can receive mail but cannot send mail. I previously had bellsouth mail and it worked fine, now I have a Charter.net account and I get a pop up every time I try to send mail saying, Mail couldn't be sent using the POP account Charter.net. I would really appreciate any help that some of you Mac experts could give me. It'd be nice to be able to send e-mail without having to go to the Charter website!
Thanks in advance for your help!
Lee

Ernie,
Is there any chance that this inability to SEND could be fixed by the removal of MessageRules.plist, MessageRules.plist.backup, MessageSorting.plist and MessageSorting.plist.backup that I have seen in other threads on Mail problems? I'm not having a complete failure of Mail, but I can't send mail (only receive).
I have contacted both my ISP (ATT) and my "second party" mail host (Godaddy.com) and all my settings are correct and things should, in theory, work fine -- but they don't!
Steve
Steve

I can receive mail but not send mail

i can receive mail but not send mail

never had this problem in the past. i tried sending mail using my I Pad then i logged in to I Cloud on my Pc so far no success and thee is no where to contact support for it.

Mail will not send mail wirelessly: need to plug into ethernet port:

Hi:
This is weird. While my wife's ibook has a strong signal and can use Safari effortlessly, when she tries to send mail, Mail won't let her. In other words SMTP is the issue because she never has a problem receiving mail the POP server. Since we have several macs on a network, she has recently borrowed my CAT5 cable (removing it from the back of my B&W G3) and when the connection is made to her ibook, the mail is automatically sent. All the other computers have no difficuly receiving or sending mail from Sympatico. I don't think it's the ISP it's the program mail. I have not checked to see if Entourage (part of Office) has the same issue. All I've done was to trash the preferences file and removed the program and reinstalled. No Change. Any ideas? My wife is tired to using my ethernet cable
Ted

You’re welcome.
Both of our versions on Mail for our tiger systems is indeed 2.07.
If you’re running Mac OS X 10.4.8, it should be at least 2.1. Have you re-installed Mail? This is a common mistake. If you’ve reinstalled Mail from installation disks with an older version of Mac OS X, you must also reinstall the Combo Update for the type of computer and the version of Mac OS X you’re using, to bring Mail back in sync with the rest of the system:
About the Mac OS X 10.4.8 Combo Update
Mac OS X 10.4.8 Combo Update for PPC
Mac OS X 10.4.8 Combo Update for Intel
You may also want to read the following articles for guidelines on how to properly install system updates:
Troubleshooting installation and software updates
Installing software updates
Basically, you should verify/repair the startup disk before installing the update, no applications should be running while installing it, and you may experience unexpected results if you have third-party system software modifications (not normal applications) installed.

Internal mail can not send. mail stored in draft folder.

Hello all,
I have Exchange server 2010 installled on Win Server 2k8 R2 which is running on VMware workstatione. I installed three server OS (2k8 R2) and that server one is my AD and DNS server. On another two OS, one is for Hub transport and CAS role and
second one is for Mailbox server. In exchange, I am able to configure new mailbox or Database. But through OWA, my mail cant send. User can able to login into server. He can access OWA page as well can access for Address book. But when I send the mail for
internal user, it is stored in draft folder. also meeting schedule can not send. I am testing exchange in lab environment. Please help me to resolve this issue.

Hi,
From your description, I recommend you run the Test-ServiceHealth cmdlet to verify if all the Windows services that Exchange server requires have started, especially the Microsoft Exchange Transport service.
If all the services that Exchange server required are started, please use message tracking to trace these undelivered messages and check if there is any error.
Hope it helps.
Best regards,
Amy
Amy Wang
TechNet Community Support

Database mail is not sending mail through SMTP TLS

Hello,
I have strange issue with SQL 2012 and Database mail. For some reason server refusing to send email over SMTP TLS. The only error reported to log is below which is completely useless (shame on you Microsoft for that).
I verified that there
1. No networking issues between server and SMTP relay host (Installed Windows Mail and sent mail through it)
2. That account and password is right (verification same as above)
3. That mail engine itself is working (verified through plain SMTP relay through local box itself)
I made a network capture of the process as well and it showing SQL server making initial TLS connection successfully to SMTP relay box and then never sending any data over established TCP connection and eventually timinig out after 60s with no data being
sent).
Any ideas?
Date 1/4/2015 2:03:33 AM
Log Database Mail (Database Mail Log)
Log ID 268
Process ID 223804
Mail Item ID 125
Last Modified 1/4/2015 2:03:33 AM
Last Modified By sa
Message
The mail could not be sent to the recipients because of the mail server failure. (Sending Mail using Account 2 (2015-01-04T02:03:33). Exception Message: Cannot send mails to mail server. (Failure sending mail.).

I looked at both locations mentioned and there is nothing there to tell exactly what is the problem. Again I see on network capture that connection IS established, just no data is being sent.
Relay is done through AWS relay server so there is not an issue on their side. Again I tested this scenario via Windows Mail client installed directly on SQL server, so any issues on the other side (like connectivity, timeouts, AV interferences are ruled
out since Windows Mail works).
Email error log supposed to have details about failure in last brackets, the one which in my case contains fuzzy "Failure to send mail". It supposed to say "unable to establish connection", "timeout expired" etc if there were
any issues on the other side. I have found a lot of reports of those issues on this forum where issue is explicitly stated in error message. In my case there is ZERO information about the issue. Mark Russinovich has excellent presentations where he talks about
useless error messages and this is certainly one of them.
Failure sending mail.

Outgoing mail server not sending mail?

Out of nowhere, my iPhone 5 stopped sending mail. It recieves fine but won't send. I did a hard reboot and also shut it off and on again and nothing has worked.
I tried creating a new acct. and that would not work either. Any idea's on how to fix this issue? Thanks!

Please check your outgoing mail folder to see if you have an email stuck in outgoing mail. This will definately stop outgoing mail.
Good luck

Mail will not send, Mail will not send

Why Can't I send email from my iPad? I previously was ably to do so. First lost the ability to send from one e account and today lost the ability to send mail from a second account.

If it was just one account, I would say to check the outgoing server settings, which you can still do, but the odds of them both going ahywire at the same time seem sort of slim. I t doesn hurt to check however.
Settings>Mail, Contacts, Calendars>Your email account>Account>Outgoing mail server - tap the server name next to SMTP and check in the primary server and make sure your username and password are entered and correct - even if it says that the password is optional.
You can try quitting the mail app completely and reboot the iPad as well. Sometimes that cures mysterious issues.
Go to the home screen first by tapping the home button. Double tap the home button and the recents tray will appear with all of your recent apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Tap the home button or anywhere above the task bar.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

Apple mail is not sending mail

I can't send mail from apple mail where I can still receive any mail.

Which email service are you using? You can check your SMTP settings by clicking Mail>Properties>Accounts. In that box you should see a SMTP section with a pulldown menu. In that pulldown menu you'll see 'Edit SMTP settings.' Just check and make sure the information is correct. The biggest problem I've seen is that the password field in those settings is blank (just enter your password and violia!)

Can receive mail, can not send mail and can connect to outgoing mail server

I am able to receive email, but I am not able to send email. I have run the Connection doctor - My email connects and logs in to the verizon mail server. My outgoing mail goes into a send folder but doesn't go out. I connect to the Outgoing Mail Server. Any suggestions?

change your outgoing mail server (SMTP) port in mail preferences to port 587.....

Mail server not sending mail properly

I'm sure there is a quick fix to this that I'm not seeing but hopefully someone knows this better than I do.
We are in transition from a Plesk Mail system over to our OSX Server Mail Server. We are transitioning over our accounts by domain and not doing every domain at once which would be a hassle. We have transitioned over the primary domain and one virtual domain so far. We have two more virtual domains to go.
This third virtual domain has a lot of users and I just finish importing them all. I followed the write up on how to do this properly with doing it in WGM and then duplicating it in Postfix since virtual domains is broken. So I followed all those instructions but something weird is happening. We have not cut over our MX record yet for that virtual domain as we want to prepare our clients for when we do. But what is happening is if I send an e-mail from my account in the primary domain to a person in the virtual domain that we have not cut over yet, they won't get any mail from me. It's almost like the OSX server thinks it controls that virtual domain and delivers it to itself instead of passing it on. Yet I look in my virtual domain settings and I don't have that virtual domain setup or turned on. I just have the user accounts in.
There has to be a way for the OSX server not to take control of virtual accounts until I'm ready for it to. Anyone know how to fix this?
-Brian

So I thought this was fixed but I'm still hearing that users of the virtual domain that we haven't cut over yet are not getting their e-mail. It seems like our server is holding onto messages that need to be sent on to the old server for now until I change the MX record.
Here is the main.cf file output:
readme_directory = /usr/share/doc/postfix
mydomain_fallback = localhost
messagesizelimit = 10485760
myhostname = mail.xpmedia.com
mailbox_transport = cyrus
mailboxsizelimit = 0
virtual_transport = lmtp:unix:/var/imap/socket/lmtp
virtualmailboxdomains = hash:/etc/postfix/virtualdomainsxp
virtualaliasdomains = hash:/etc/postfix/virtual_domains
virtualaliasmaps = hash:/etc/postfix/virtual
mydomain = xpmedia.com
enableserveroptions = yes
inet_interfaces = all
relayhost =
mydestination = $myhostname,localhost.$mydomain,localhost,xpmedia.com
smtpdsasl_authenable = yes
smtpduse_pwserver = yes
smtpdrecipientrestrictions = permitsasl_authenticated,permit_mynetworks,reject_unauthdestination,permit
smtpdpw_server_securityoptions = login,cram-md5,plain
content_filter = smtp-amavis:[127.0.0.1]:10024
smtpdclientrestrictions = permit_mynetworks rejectrblclient zen.spamhaus.org permit
mapsrbldomains =
mynetworks = 98.173.129.235,127.0.0.0,127.0.0.1
localrecipientmaps =
luser_relay = postmaster
transportmaps=hash:/etc/postfix/transportmaps
Here is the Transport Maps file output:
xpmedia.com :
xpmissions.com :
xpwebchurch.com smtp:mail.xpmissions.com:587

Exchange Mail will not Send mail from Iphone when Desktop computer Shutdown

A client of mine has an Iphone that I have setup to connect to his Microsoft Exchange 2003 Server using Activesync. Everything works fine and dandy until he shutdown his desktop in his office. Than he is no longer able to send any mail from his Iphone but is able to receive it no problem. Anyone have any insight on this problem?

Your problem is with Cox and Cox not having an authenticated SMTP server.
Not many ISPs provide an authenticated SMTP server and I'm not sure why - especially with laptops and devices such as the iPhone so popular.
I'm a Time Warner/RoadRunner customer for cable and internet access and I quit using my RR email account several years ago for this very reason. I switched to using my .Mac account as my primary personal email account which has an authenticated SMTP server. I'm able to send messages with the account regardless the internet service provider used for internet access. My business POP account also has an authenticated SMTP server and no problems sending with this account either - via a number of different Wi-Fi connections and EDGE.
I suggest seriously considering switching to another email account. A Gmail account is free, can be accessed as a POP or IMAP account with the email client on your computer as well as with the iPhone's email client, has a good spam filter at the incoming mail server, and has an authenticated SMTP server.
If you ever move or decide to change your ISP from Cox to a different ISP, your email account and address will not need to change. You can access and send messages with a Gmail account with any ISP - the same with a .Mac account. And you'll have much more server storage space than Cox provides.

Mail 10.8.3 not sending mail from intended account

Since upgrading from 10.8.2 to 10.8.3, my wife is having a new problem where Mail is not sending mail from the intended account.
She has 2 mail acocunts, and normally sends most e-mail from one of them. That mail account is set as the default to send messages from.
Now when she composes messages, it sends them from the other account, even if she has made certain that the pull-down choice of "send message as..." is set to the correct/desired mail account.
The only way she was able to stop this was to deactivate the other e-mail account in Mail's preferences.
Is anyone else having this problem?

Hi.
Please click on the Mail > Prefrence > Account.
then click on the first account on the left side & Uncheck the option 'Use onlythis server'
repeat the step for the second account aswell.
this should fix your issue.
Kind regards,
Ayaz

Mail will not send but thunderbird will

I have two mail programs: mac mail and thunderbird. Mail will not send mail, but Thunderbird will. Any suggestions?
SJ

Yeah stop trying to make Mac Mail work and just use Thunderbird. You really don't need 2 Mail programs.

WF mailer is not sending mail.

Similar Messages

Maybe you are looking for