What adaptors are needed to use in Italy

Going to Itally and trying to understand what electrical addaptors I will need. Will I need just a plug addaptor or will I need a transformer also?

An inexpensive plug adapter is all that is required. Your Mac's power adapter will accept any utility voltage and frequency available on Earth.
You can buy this:
http://store.apple.com/us/product/MB974ZM/B/apple-world-travel-adapter-kit
... or you can buy a set from Wal-Mart for about $30 less.

Similar Messages

  • What libraries are needed to use these functions

    Hey Guys,
    I have a short three line code,
    TTConnection conn;
    TTStatus stat;
    conn.Connect("DSN=MyDSN", stat);
    Just to compile & link this code what all libraries do I need ?
    I am using the following libraries,
    "-L C:\Dev-Cpp\lib -lttclasses70CS"
    "-L C:\Dev-Cpp\lib -ltten70.lib"
    "-L C:\Dev-Cpp\lib -lttdv70.lib"
    Is this ok
    - prashant

    It depends on whether the application is using client/server or direct mode connectivity to TimesTen.
    For client/server with TTClasses you need:
    ttclasses70cs.lib
    ttcl70.lib
    For direct mode you need:
    ttclasses70.lib
    ttdv70.lib
    tten70.lib
    If you want the application to dynamically use client/server or direct mode based on the DSN definition use:
    ttclasses70dm.lib
    odbc32.lib (Microsoft driver manager library)
    Note that there is a significant performance hit in using the driver manager.
    Chris

  • What levels of Acrobat are needed to use forms created in Acrobat Pro 9?

    What levels of Acrobat are needed to use forms created in Acrobat Pro 9? I want to use my form as a job ticket but want to know what levels of adobe reader are needed for the end users to be able to fill out & submit the forms without any problems.

    Reader 7 and higher should be able to fill out forms and submit if the pdf format allows Reader 7 to fill out the form. However, without problems is a different issue. Submission of forms via email is ALWAYS a problem. It is always better to post the form on a website and have the form filled out on the web and have the data stored or sent to a database for further action.

  • Iba allow others to make text edits. What workflow are you guys using to allow others to make text edits once the iBook has been layed out and formatted?  Is it too late? Do I need to export txt then reimport the editted text and reformat it all again?

    iba allow others to make text edits. What workflow are you guys using to allow others to make text edits once the iBook has been layed out and formatted?  Is it too late? Do I need to export txt then reimport the editted text and reformat it all again?

    Hi Ken,
    Thanks for the reply. The project I am working on is a test project for a customer. They could potentially want a number of their educational subjects presented as an interactive text book. The intent of this first project with them is to establish a logical workflow that will allow us to efficiently estimate costs and allow for review throughout the design process. Having worked with customers on creative projects in the past I can anticipate that they will want a number of changes made once they see a working version of the interactive text book.
    It is a grim reality that no project can be fully edited and planned prior to working on it and I know revisions and changes are always made once the customer can see their product. It is ok with me if there is no easy way to pass the text back and forth from the customer and me without having to reformat everything but I just want to know that is the way it works in order to provide a realistic time estimate for the project.
    My hope was I would be able to export the formatted text, allow them to make edits and then reimport that formatted text. The style sheets I am using are from one of the iBooks Author templates.
    Do you know if there is a way to use (or export ) this style sheet so it can be used in a Pages Document?
    Or, would the best option be to have the customer install iBooks Author? This would require the customer to have a mac and the software so it doesn't work for all cases.
    Another idea I was considering would be to export the book as a PDF and have the customer add markup and notes to the PDF.
    All of these options do not seem too great to me.
    I am open to any ideas.
    Thanks,
    Rob

  • In what case, we need to use PI for vendor replication in MM-SUS?

    Dear Experts,
    In what scenarios, we need to use or configure the PI settings for vendor replication between MM and SUS? The SAP configuration guide for SRM 7.01 mentions about the PI settings for vendor replication from ECC to SUS.
    However, we are able to replicate the vendor from ECC to SUS using the program BBPGETVD in SUS client?
    In what circumstances, we need to configure the PI settings for vendor replication when we are able to do so in a much simpler way?
    Thanks in advance,
    Ranjan
    Ranjan Sutradhar

    Hi Ranjan,
    In all circumstances you need to replicate vendors from MM to SUS via PI. BBPGETVD is not the right way to replicate vendors to SUS because the information like vendor class, assignment of this vendor class to an object and the vendor classification cannot be transferred via BBPGETVD.
    Hence you will have to use PI. You can try sending a PO from MM to SUS and the PO will fail in SUS with a message like 'Vendor not present in SUS' if you use BBPGETVD.
    Regards,
    Nikhil

  • What roles are required to use Guided Procedures?

    Hi ,
    What roles are required to use Guided Procedures?
    Thanks
    Srinivas.K

    Hi,
        Refer this block  https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/3603. [original link is broken] [original link is broken] [original link is broken]
        This blog is very useful to u and in this blog she is explained what roles to needed for Guided Procedure.The Composite Application Framework role is used for the Guided Procedure in the Portal.First create the user and then assign the CAF role for that user.This is way to obtain the Guided Procedure for that user.
    Thanks,
    satheshkumar.R

  • While doing ODI migration what things are needed to be setup in Topology?

    While doing ODI migration what things are needed to be setup in Topology manager ?
    1.Like in Toplogy in file we hive file paths.
    2. In Planning we set Logical schema .
    Not sure about other things.
    Hoping some can can help!!!!!!!!!!!!!!!11

    Lots of things are defined in the topology manager - below is a simplified list
    1) Physiccal Schemas the actual connection information / details related to any technology you plan to use in your ODI integration interfaces
    2) Logical schema, abstracted version of the Physical schema which allows greater flexibility ad reuse across environments
    3) Contexts - how you asssociate logical and physical schemas
    4) Agents - manage the execution of ODI jobs
    When you talk about migration, do you mean moving ODI objects between seperate environments such as Dev and Prod? If so you will need to ensure that all the technologies you use in Dev are present in Prod. The physical layer has been set up with all the correct connection details. Your logical scemas has been set up matching your configuration in the dev environment and you have used the contexts to associate the logical and physical layers as per your dev configuration.

  • WHAT PARTS ARE NEEDED TO SHOW MY MAC 10.8.4 OVER TV-.

    WHAT PARTS ARE NEEDED TO SHOW MY MAC 10.8.4 OVER TV….

    About AirPlay Mirroring in OS X Mountain Lion
    You need:
    An AirPlay-enabled device such as http://store.apple.com/us/ipod/ipod-accessories/apple-tv
    A suitable TV monitor
    A network
    HDMI cable
    A compatible Mac:
    iMac (Mid 2011 or newer)
    Mac mini (Mid 2011 or newer)
    MacBook Air (Mid 2011 or newer)
    MacBook Pro (Early 2011 or newer)
    Or, depending on the model Mac you intend to use: a Thunderbolt or MiniDP or DVI to HDMI adapter for a wired connection to your TV or AVR

  • Does anyone know what converter i need to use to watch a dvd film on my phone

    does anyone know what converter i need to use to watch a dvd film on my phone

    Moveis/tv shows etc that you buy on DVD are encrypted to stop you from doing this.  Breaking this encryption is against the law.  We cannot help you break the law here.
    Sorry.

  • What do I need to use iphone and macbook air in europe

    What do I need to use iphone 4 and macbook air in europe? 

    Hello Bev23,
    Thank you for posting in the Apple Support Communities.  To charge your devices, you will need adapters for the country you are in.  We sell a Apple World Travel Adapter Kit that will work with several different countries and will work with both your MacBook Air and iPhone:
    Apple World Travel Adapter Kit
    http://store.apple.com/us/product/MB974ZM/B/apple-world-travel-adapter-kit
    You can also find information about wireless carrier support for using your iPhone in the article below.  You may need to contact your wireless carrier for more information about using your iPhone abroad:
    iPhone: Wireless carrier support and features
    http://support.apple.com/kb/HT1937
    Have a safe trip!
    Best,
    Sheila M.

  • What commands are needed to configure authentication?

    I'm running the JaasAcn Sample from a DOS prompt on a Win XP client and am getting 'authentication failed'. My Active Directory Realm is AD.COURSEWIZARD.COM and the KDC FQDN is ad.ad.coursewizard.com. It succeeds when I run the 'Sample' locally on the AD server. If I set 'isInitiator=false' in jaas.conf, it succeeds no matter what I enter for username & password. It seems that I need to configure an SPN.
    When setting an SPN, are you declaring that a particular AD user account is associated with a remote service that will be requesting authentication?
    Do I have to also use the 'ktpass' command, even though I'm using a Win client?
    If I use ktpass, but am just testing with a PC on the Inet, should I just use my IP address for domain since I don't have a FQDN?
    Do I need to move the keytab file, created by ktpass, to the client and configure it to use it?
    Does the ADS need to have a krb5.conf or krb5.init file? I don't see one under '../drivers/etc/'.
    What commands are needed in order to configure the server, and client, to authenticate successfully?
    Cheers

    Sorry, I haven't seen a nice JGSS for Windows guide yet.
    Back to your questions:
    1. When setting an SPN, are you declaring that a particular AD user account is associated with a remote service that will be requesting authentication?
    IMHO, setspn creates a service-like alias for a normal AD account, so that GSS style server program can use it as a NT_HOSTBASED_SERVICE name.
    2. Do I have to also use the 'ktpass' command, even though I'm using a Win client?
    ktpass is used at the server side, what you use at client side is unrelated.
    3. If I use ktpass, but am just testing with a PC on the Inet, should I just use my IP address for domain since I don't have a FQDN?
    Porbably not. Anyway, AD works fine with a DNS. If you haven't one, config the AD server as a DNS server.
    4. Do I need to move the keytab file, created by ktpass, to the client and configure it to use it?
    No, keytab is used at server side. The client side uses the native credentials cached in LSA after you login to Windows as an AD account.
    5. Does the ADS need to have a krb5.conf or krb5.init file? I don't see one under '../drivers/etc/'.
    Yes, Java needs the file for both client and server JGSS programs. Normally it should be inside the WINDOWS directory. Somethign weird woun happen if you uses Terminal Services or else. Add -Dsun.security.krb5.debug=true to the Java command line will show you when Java tries to look for this file.
    6. What commands are needed in order to configure the server, and client, to authenticate successfully?
    You need setspn.exe and ktpass.exe on the server to create the SPN and the keytab file. No tools are necessary on the client side, but MS's kerbtray.exe and klist.exe (attention: MS's klist, not Java's) are nice. BTW, a nice network sniffer (say, Wireshark) is also useful.
    I'm not an expert on all these questions, but I cannott resist the temptation to give an answer to each of them.

  • What skills are needed to manage Exalogic?

    Hi there
    Please let me know if I should be directing this question to another Forum and which Forum it should be.
    We are thinking of purchasing Exalogic with a view to having a private Cloud.
    What skills are needed or teams in order to manage Exalogic in-house?
    I've used google but not really found the answers other than a couple of Oracle docs which suggest sys admins teams, network teams, etc could all have a hand in the management as they currently exist.
    However, Management are wondering if a new team needs to be formed and what skills that team should have.
    As we already have Exadata under the DBA team they are wondering if the skills the DBAs have will also apply for Exalogic.
    Thanks.

    Others are welcome to jump in!
    Thanks and stay tuned to for results next week<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/developerareas/technology">The Technology HomePage</a> for tally and scores

  • What Systems are the Pros Using for Premier, After Effects, and SpeedGrade?

    I bought the full Creative Cloud in hopes of making a career for myself in audio/visual editing. The problem is, my system doesn't seem to be able to handle the software, particularly when changing back and forth between the three programs mentioned above. Beyond that, my first project failed to export properly. Moreover, all throughout its development the system lagged badly. And this is after having followed all the preferences recommendations available in the Adobe's tutorials and elsewhere on the Web.
    Here's my system:
    SYX-P67A-C43: Intel Core i7 2600 (an 8-core unit) at 3.4GHz, with 8 Gigs of RAM (soon to be 16) with a GTX 550 NVidia Card, 1Gig of RAM.
    As you can see, this is far in excess of what Adobe claims to be the minimum system requirements. It's obviously NOT.
    What systems are the Pros using (like the guys in the tutorials) for Premier, After Effects, and SpeedGrade? Give me the exact machines with all the specs so I can price one up.

    ...although a little " old" now.....the fundamentals of your machine are still OK to get started IF you : 1. INCREASE your system memory to the full 32 GB....should make a BIG difference in performance.....8 GB is NOT enough, it will HINDER performance. 2. OVERCLOCK your CPU !!!.....many owners of your CPU have been safely running at 4.5 Ghz or HIGHER...some at 4.8 Ghz !!! This OC will make a DRAMATIC improvement  as  CPU speed is a huge factor in performance. 3. Improve your video card to a new NVidia 970 with 4 GB of video memory. 4. Check and MAKE SURE the power supply in your machine is ADEQUATE to handle everything, esp. if you overclock the CPU....generally 850 to 1,000 watts of a quality make is good. 5. Use a fast storage system...that means a SATA III SSD as your "C" drive, ( boot drive), being a Crucial M550 series,( or, M600 series), OR, a Samsung 850 Pro series SSD, ( more expensive). Other SSDs are NOT recommended, only these two makes are recommended for technical reasons. On this "C" drive, you should have Operating system, Programs, and Windows page file ONLY !! Your "D" drive can be ANOTHER single SSD to be used as a "cache drive" for all the previews, media cache, and cache files that Premier Pro creates PLUS, it can ALSO serve as the "Global Performance cache" used in After Effects. All your media and project files can go on your "E" drive. HERE you would have LIMITED OPTIONS because your motherboard only has TWO SATA III ports, ( which would already be used b the "C" and "D" SSDs). You NOW have only 4 SATA II ports left ......you COULD RAID 0 four 1 TB HDDs off these ports and have a 4TB backup drive connected to one of your TWO USB 3 external ports.....any DVD or Blue-ray can ALSO go on an external port.
    However, if you are into spending REAL MONEY !!!.....Go Haswell E and X99 all the way !!...THAT will give you great performance !!

  • How do I determine what xtras are needed?

    From the searching I have done it appears that xtras equired are mostly trial-and-error.
    Is there an efficient way to determine what xtras are needed for each lindividual movie?
    My programs are divided into a series of sequential movies.  At the end of each movie
    there is a goto statement to launch the next movie.  Does that require me to determine
    xtras for each separate movie? 
    In a perfect world there would be a way for Director to search a  folder for and present an aggregate list of all xtras required for that set of movies.
    If no such method exists, what is the recommended hunt and peck system?

    Thanks for the response, rduane.  But I refer to the procedures as a bit random for the reasons you mentioned in your explanation.  For example, you stated that, "Director will normally add all of the Xtras that you need to each movie as you build it".  And, yes, I know that it does add some automatically.  But, if Director really does "add all of the xtras that you need to each movie as it is built", how could I ever jump to one that is missing a needed xtra?  If it needs it, why wasn't it added when it was built?
    So, that's the reason I mentioned "trial and error", and "hunt and peck".  The system is not reliable in its handling of xtras, or which ones are needed where.  I am familiar with workarounds such as going to each movie and selecting Modify>Movies>Xtras to see which ones Director has added,  But that is all it tells you.  It does not tell you if it has added all the xtras "needed".  And when the error message comes up, it does name the missing xtra, but not which movie needs it.  So, one has to go find the named xtra and copy it over to the Xtras folder. 
    At least, that's what I do to fix it.  But I asked the question because I wanted to know if Xtras handling itself is unreliable, or if I'm doing something incorrectly.
    Dewey-+

  • HT1918 how do you know what computers are authorized to use home share before i delete a computer

    how do you know what computers are authorzed to use an I tune account?

    Welcome to the Apple Community.
    There is no way to view a list of authorised computers. You can only tell a computer is authorised from that computer itself, from the store menu in iTunes.

Maybe you are looking for