What libraries are needed to use these functions

Hey Guys,
I have a short three line code,
TTConnection conn;
TTStatus stat;
conn.Connect("DSN=MyDSN", stat);
Just to compile & link this code what all libraries do I need ?
I am using the following libraries,
"-L C:\Dev-Cpp\lib -lttclasses70CS"
"-L C:\Dev-Cpp\lib -ltten70.lib"
"-L C:\Dev-Cpp\lib -lttdv70.lib"
Is this ok
- prashant

It depends on whether the application is using client/server or direct mode connectivity to TimesTen.
For client/server with TTClasses you need:
ttclasses70cs.lib
ttcl70.lib
For direct mode you need:
ttclasses70.lib
ttdv70.lib
tten70.lib
If you want the application to dynamically use client/server or direct mode based on the DSN definition use:
ttclasses70dm.lib
odbc32.lib (Microsoft driver manager library)
Note that there is a significant performance hit in using the driver manager.
Chris

Similar Messages

What do I need to use these older DAQmx VI's?

I'm trying to run an already-constructed VI on a separate computer from the one that actually controls hardware. The VI runs on the primary computer in LabVIEW 7.1, DAQmx 8.0 on Windows XP Professional.
My system runs Windows Vista Business x32, LabVIEW 8.5, and DAQmx 8.0.1. When I load up the constructed VI, I cannot load (or find) the following sub-VI's:
1) AI Config.vi
2) AI Start.vi
3) AI Read (scaled array).vi
4) AO Update Channels (scaled array).vi
5) DIO Writer.vi
6) simple www server.vi
7) AI Clear.vi
I know that most of these VI's are very similar to the current DAQmx VI's like Start Task, Read, etc., so am I right in thinking that my system can't find these files because the newer DAQmx doesn't have them? I tried downgrading my version of DAQmx (which was initially the newest) to DAQmx v. 8.0.1, but this hasn't changed anything. (I couldn't find v. 8.0; 8.0.1 was the closest I could find.) Do any of you have ideas about this? Also, are any of you familiar with "simple www server.vi"? I'm not sure whether this was a user-created sub-VI or not. Thanks for your help!

Those functions aren't DAQmx at all. They are part of traditional daq. That is a completely different driver. The latest is at http://joule.ni.com/nidu/cds/view/p/id/570/lang/en and it is not compatible with Vista. Nor can you run the program on a pc without hardware.

What adaptors are needed to use in Italy

Going to Itally and trying to understand what electrical addaptors I will need. Will I need just a plug addaptor or will I need a transformer also?

An inexpensive plug adapter is all that is required. Your Mac's power adapter will accept any utility voltage and frequency available on Earth.
You can buy this:
http://store.apple.com/us/product/MB974ZM/B/apple-world-travel-adapter-kit
... or you can buy a set from Wal-Mart for about $30 less.

Iba allow others to make text edits. What workflow are you guys using to allow others to make text edits once the iBook has been layed out and formatted? Is it too late? Do I need to export txt then reimport the editted text and reformat it all again?

iba allow others to make text edits. What workflow are you guys using to allow others to make text edits once the iBook has been layed out and formatted? Is it too late? Do I need to export txt then reimport the editted text and reformat it all again?

Hi Ken,
Thanks for the reply. The project I am working on is a test project for a customer. They could potentially want a number of their educational subjects presented as an interactive text book. The intent of this first project with them is to establish a logical workflow that will allow us to efficiently estimate costs and allow for review throughout the design process. Having worked with customers on creative projects in the past I can anticipate that they will want a number of changes made once they see a working version of the interactive text book.
It is a grim reality that no project can be fully edited and planned prior to working on it and I know revisions and changes are always made once the customer can see their product. It is ok with me if there is no easy way to pass the text back and forth from the customer and me without having to reformat everything but I just want to know that is the way it works in order to provide a realistic time estimate for the project.
My hope was I would be able to export the formatted text, allow them to make edits and then reimport that formatted text. The style sheets I am using are from one of the iBooks Author templates.
Do you know if there is a way to use (or export ) this style sheet so it can be used in a Pages Document?
Or, would the best option be to have the customer install iBooks Author? This would require the customer to have a mac and the software so it doesn't work for all cases.
Another idea I was considering would be to export the book as a PDF and have the customer add markup and notes to the PDF.
All of these options do not seem too great to me.
I am open to any ideas.
Thanks,
Rob

What levels of Acrobat are needed to use forms created in Acrobat Pro 9?

What levels of Acrobat are needed to use forms created in Acrobat Pro 9? I want to use my form as a job ticket but want to know what levels of adobe reader are needed for the end users to be able to fill out & submit the forms without any problems.

Reader 7 and higher should be able to fill out forms and submit if the pdf format allows Reader 7 to fill out the form. However, without problems is a different issue. Submission of forms via email is ALWAYS a problem. It is always better to post the form on a website and have the form filled out on the web and have the data stored or sent to a database for further action.

I have an iPhone 4s. My problem is that I can't see the icon of FaceTime and iMessage. I need to use these apps. What should I do?

I have an iPhone 4s. My problem is that I can't see the icon of FaceTime and iMessage. I need to use these apps. What should I do?

Red21Gerard wrote:
I have an iPhone 4s. My problem is that I can't see the icon of FaceTime and iMessage. I need to use these apps. What should I do?
FaceTime:
Check Settings>FaceTime>ON and check Settings>General>Restrictions>FaceTime>ON. There is no icon, on the 4 & 4S FaceTime is accessed through contacts. Go into your Contacts, access the contact you want to FaceTime with and you will see a tab at the bottom of their contact card. You can also access FaceTime by going into your Phone app, select dialling keypad, dial number, press call and an option for FaceTime on the keypad will appear. It should be noted that FaceTime has been removed from iPhones sold in some Middle Eastern countries at the express wish of the respective Governments.
iMessage:
Check Settings>Messages>iMessage>ON. The icon is the same as your SMS icon. This support document will explain how to use iMessage http://support.apple.com/kb/HT3529

How to use these function modules

Hi all,
can anyone help that how to use these Function modules to update the status of a task, what are all the inputs i required to proceed
1. FC_USER_AUTHORITY_CHECK
<b>2. FC_USER_STATUS_CHECK
3. FC_USER_STATUS_UPDATE</b>
4. FC_USER_GET_CACTI
5. FC_USER_CHECK_FOR_OUTPUT
Thanks in Advance
Ganesh

Hi Rob,
thanks for ur reply,
but they are not clear what they are meant to be, I understood there are some flags needed to run the Function Modules 2 & 3 which are in bold...
but how do i populate them.. i am not getting that..
thanks
ganesh

What is the need of creating partner functions for sales document type.

Hi SAP (SD-GURUS),
Actually we create partner functions before creating customer ex: sold to party, ship to party, bill to party, and payer.
These partner functions are going to be copied into sales order while processing sales order.
Again what is the need of creating partner functions for sales document type.
Thanks&Regards
sreenivas peruru

There are some Partners you could enter at Sales ORder Level. E.g. Sales Person, Employee Responsible, Forwarding Agent, Broker, etc.
Thus these partner Determination need to be carried out at Sales Order Level & not at Customer Master level.
So we have to configure partner Determination for various levels e.g. Customer Master, Sales Order, Delivery level etc...
Hope this helps...
THanks,
Jignesh Mehta

I am having font issues with font book. It validates the font, yet it is not availabe in my software programs (Adobe or Microsoft). What can I do to use these fonts?

I am having font issues with font book. It validates the font, yet it is not availabe in my software programs (Adobe or Microsoft). What can I do to use these fonts?
I actually created these fonts with fontagrapher in 1998 and have been using them regularly ever since and now they are not available in InDesign. I really need to use them.

I found a page on Adobe, Troubleshoot fonts | Mac OS X
On PostScript type 1 fonts you need to copy/move the fonts to the correct font folder because Font Book doesn't copy them into the folder. Select the fonts double-click the fonts and Find in the font Book app and validate.
The correct font folder depends how you are set up. I am by myself so my font folder was MyHarddrive/Library/Fonts. I was using Suitcas fusion and the fonts are located in a different folder.
Most of the fonts have worked. Go to
http://helpx.adobe.com/x-productkb/global/troubleshoot-fonts-mac-os-x.html
This should help. Good Luck.

What commands are needed to configure authentication?

I'm running the JaasAcn Sample from a DOS prompt on a Win XP client and am getting 'authentication failed'. My Active Directory Realm is AD.COURSEWIZARD.COM and the KDC FQDN is ad.ad.coursewizard.com. It succeeds when I run the 'Sample' locally on the AD server. If I set 'isInitiator=false' in jaas.conf, it succeeds no matter what I enter for username & password. It seems that I need to configure an SPN.
When setting an SPN, are you declaring that a particular AD user account is associated with a remote service that will be requesting authentication?
Do I have to also use the 'ktpass' command, even though I'm using a Win client?
If I use ktpass, but am just testing with a PC on the Inet, should I just use my IP address for domain since I don't have a FQDN?
Do I need to move the keytab file, created by ktpass, to the client and configure it to use it?
Does the ADS need to have a krb5.conf or krb5.init file? I don't see one under '../drivers/etc/'.
What commands are needed in order to configure the server, and client, to authenticate successfully?
Cheers

Sorry, I haven't seen a nice JGSS for Windows guide yet.
Back to your questions:
1. When setting an SPN, are you declaring that a particular AD user account is associated with a remote service that will be requesting authentication?
IMHO, setspn creates a service-like alias for a normal AD account, so that GSS style server program can use it as a NT_HOSTBASED_SERVICE name.
2. Do I have to also use the 'ktpass' command, even though I'm using a Win client?
ktpass is used at the server side, what you use at client side is unrelated.
3. If I use ktpass, but am just testing with a PC on the Inet, should I just use my IP address for domain since I don't have a FQDN?
Porbably not. Anyway, AD works fine with a DNS. If you haven't one, config the AD server as a DNS server.
4. Do I need to move the keytab file, created by ktpass, to the client and configure it to use it?
No, keytab is used at server side. The client side uses the native credentials cached in LSA after you login to Windows as an AD account.
5. Does the ADS need to have a krb5.conf or krb5.init file? I don't see one under '../drivers/etc/'.
Yes, Java needs the file for both client and server JGSS programs. Normally it should be inside the WINDOWS directory. Somethign weird woun happen if you uses Terminal Services or else. Add -Dsun.security.krb5.debug=true to the Java command line will show you when Java tries to look for this file.
6. What commands are needed in order to configure the server, and client, to authenticate successfully?
You need setspn.exe and ktpass.exe on the server to create the SPN and the keytab file. No tools are necessary on the client side, but MS's kerbtray.exe and klist.exe (attention: MS's klist, not Java's) are nice. BTW, a nice network sniffer (say, Wireshark) is also useful.
I'm not an expert on all these questions, but I cannott resist the temptation to give an answer to each of them.

In what case, we need to use PI for vendor replication in MM-SUS?

Dear Experts,
In what scenarios, we need to use or configure the PI settings for vendor replication between MM and SUS? The SAP configuration guide for SRM 7.01 mentions about the PI settings for vendor replication from ECC to SUS.
However, we are able to replicate the vendor from ECC to SUS using the program BBPGETVD in SUS client?
In what circumstances, we need to configure the PI settings for vendor replication when we are able to do so in a much simpler way?
Thanks in advance,
Ranjan
Ranjan Sutradhar

Hi Ranjan,
In all circumstances you need to replicate vendors from MM to SUS via PI. BBPGETVD is not the right way to replicate vendors to SUS because the information like vendor class, assignment of this vendor class to an object and the vendor classification cannot be transferred via BBPGETVD.
Hence you will have to use PI. You can try sending a PO from MM to SUS and the PO will fail in SUS with a message like 'Vendor not present in SUS' if you use BBPGETVD.
Regards,
Nikhil

What Systems are the Pros Using for Premier, After Effects, and SpeedGrade?

I bought the full Creative Cloud in hopes of making a career for myself in audio/visual editing. The problem is, my system doesn't seem to be able to handle the software, particularly when changing back and forth between the three programs mentioned above. Beyond that, my first project failed to export properly. Moreover, all throughout its development the system lagged badly. And this is after having followed all the preferences recommendations available in the Adobe's tutorials and elsewhere on the Web.
Here's my system:
SYX-P67A-C43: Intel Core i7 2600 (an 8-core unit) at 3.4GHz, with 8 Gigs of RAM (soon to be 16) with a GTX 550 NVidia Card, 1Gig of RAM.
As you can see, this is far in excess of what Adobe claims to be the minimum system requirements. It's obviously NOT.
What systems are the Pros using (like the guys in the tutorials) for Premier, After Effects, and SpeedGrade? Give me the exact machines with all the specs so I can price one up.

...although a little " old" now.....the fundamentals of your machine are still OK to get started IF you : 1. INCREASE your system memory to the full 32 GB....should make a BIG difference in performance.....8 GB is NOT enough, it will HINDER performance. 2. OVERCLOCK your CPU !!!.....many owners of your CPU have been safely running at 4.5 Ghz or HIGHER...some at 4.8 Ghz !!! This OC will make a DRAMATIC improvement as CPU speed is a huge factor in performance. 3. Improve your video card to a new NVidia 970 with 4 GB of video memory. 4. Check and MAKE SURE the power supply in your machine is ADEQUATE to handle everything, esp. if you overclock the CPU....generally 850 to 1,000 watts of a quality make is good. 5. Use a fast storage system...that means a SATA III SSD as your "C" drive, ( boot drive), being a Crucial M550 series,( or, M600 series), OR, a Samsung 850 Pro series SSD, ( more expensive). Other SSDs are NOT recommended, only these two makes are recommended for technical reasons. On this "C" drive, you should have Operating system, Programs, and Windows page file ONLY !! Your "D" drive can be ANOTHER single SSD to be used as a "cache drive" for all the previews, media cache, and cache files that Premier Pro creates PLUS, it can ALSO serve as the "Global Performance cache" used in After Effects. All your media and project files can go on your "E" drive. HERE you would have LIMITED OPTIONS because your motherboard only has TWO SATA III ports, ( which would already be used b the "C" and "D" SSDs). You NOW have only 4 SATA II ports left ......you COULD RAID 0 four 1 TB HDDs off these ports and have a 4TB backup drive connected to one of your TWO USB 3 external ports.....any DVD or Blue-ray can ALSO go on an external port.
However, if you are into spending REAL MONEY !!!.....Go Haswell E and X99 all the way !!...THAT will give you great performance !!

27 inch iMac to a 29 inch Dell Ultrasharp U2913WM monitor. What do I need to hook these two up?

27 inch iMac to a 29 inch Dell Ultrasharp U2913WM monitor. What do I need to hook these two up?

Welcome to Apple Support Communities
That monitor has got a lot of ports you can use. The easiest and cheapest way to connect the iMac to the Dell monitor is through a Mini DisplayPort cable, because you do not need any adapter.
Another way you have is to connect it through HDMI. In this case, you need a Mini DisplayPort to HDMI adapter and a HDMI cable

What roles are required to use Guided Procedures?

Hi ,
What roles are required to use Guided Procedures?
Thanks
Srinivas.K

Hi,
Refer this block https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/3603. [original link is broken] [original link is broken] [original link is broken]
This blog is very useful to u and in this blog she is explained what roles to needed for Guided Procedure.The Composite Application Framework role is used for the Guided Procedure in the Portal.First create the user and then assign the CAF role for that user.This is way to obtain the Guided Procedure for that user.
Thanks,
satheshkumar.R

While doing ODI migration what things are needed to be setup in Topology?

While doing ODI migration what things are needed to be setup in Topology manager ?
1.Like in Toplogy in file we hive file paths.
2. In Planning we set Logical schema .
Not sure about other things.
Hoping some can can help!!!!!!!!!!!!!!!11

Lots of things are defined in the topology manager - below is a simplified list
1) Physiccal Schemas the actual connection information / details related to any technology you plan to use in your ODI integration interfaces
2) Logical schema, abstracted version of the Physical schema which allows greater flexibility ad reuse across environments
3) Contexts - how you asssociate logical and physical schemas
4) Agents - manage the execution of ODI jobs
When you talk about migration, do you mean moving ODI objects between seperate environments such as Dev and Prod? If so you will need to ensure that all the technologies you use in Dev are present in Prod. The physical layer has been set up with all the correct connection details. Your logical scemas has been set up matching your configuration in the dev environment and you have used the contexts to associate the logical and physical layers as per your dev configuration.

What libraries are needed to use these functions

Similar Messages

Maybe you are looking for