What are required to send message to MQseries server

Hi,
What are required to send a message to MQseries server through JMS . Is JNDI lookup is necessary for this.
thanks in advance,
akmal

you need a small VM, 2-4GB RAM that's internet facing in order to host RDWeb role which runs on IIS. users connect to the web page portal and login, and can launch an RDP session to whatever VMs you have. this requires you to obtain RD CALs.
you can also go with the RDGateway route but it's somewhat more complicated, requiring certificates.
in either case, you need a server with specific port forwarding to the internet through whatever firewall/proxy you have and licensing to go along with it.
it's much easier to just setup a VPN in my opinion.

Similar Messages

What are the possibilities sending notifications using TTY

What are the possibilities sending notifications using TTY? And how to integrate TTY with Siebel

Here are the possibilities of Content search webparts
http://office.microsoft.com/en-in/office365-sharepoint-online-enterprise-help/configure-a-content-search-web-part-in-sharepoint-HA104119042.aspx
http://office.microsoft.com/en-in/office365-sharepoint-online-enterprise-help/when-to-use-the-content-query-web-part-or-the-content-search-web-part-in-sharepoint-HA104206662.aspx
Compare the strengths and limitations of the Web Parts
It’s important that you understand the strengths and limitations of the two Web Parts because if you choose the wrong one, your site could run into performance problems. You can use both Web Parts to show content that is based on a query. In a simplified
world, here’s how you can decide between the two:
Use the CQWP when you have a limited amount of content, your query is simple, and you don’t expect your content to grow much in the future.
Use the CSWP in all other scenarios when you want to show content that is based on a query.
The table below gives a comparison of the two Web Parts:
Web Part behavior
Content Query Web Part
Content Search Web Part
Query configuration
Easy
You’ll need to know about certain search features such as
managed properties.
Query across large amounts of content
Limited
Yes
Handle complex queries
Limited
Yes
Scale to handle future content growth
Limited
Yes
Display content from other site collections
No
Yes (see
section below)
Design of query results can be customized
Yes, by using XSLT.
Yes, by using HTML.
Maintenance cost in a complex site architecture
High
Small (see
section below)
Narrow down the query results that are displayed in the Web Part
No
Yes, in combination with the
Refinement Web Part.
It was not there previously but then it was added to Office 365
http://blogs.office.com/2013/10/29/search-innovations-for-site-and-portal-design-in-sharepoint-online/
If this helped you resolve your issue, please mark it Answered

Whats the difference between sending messages via socket and MQs?

Whats the difference between sending messages via socket and MQs?

Soph wrote:
Whats the difference between sending messages via socket and MQs?With JMS (and the like) your application uses a socket to connect to a central server called a "*Message Broker*". Over this connection it can send or receive messages.
A Message Broker is somewhat analogous to a database server. Multiple clients connect to it to exchange messages. As with a database a client first establishes a connection, then requests specific facilities like subscriptions.
It creates a strong decoupling between sender and receiver and handles stuff like allowing multiple receivers for the same message, queuing of messages for applications not currently running and so on.
(And don't worry, you can get perfectly good message brokers for free such as openMQ and activeMQ.)

What are required feilds values for creating a sales order using va01?

What are required feilds values for creating a sales order using va01?
Please give examples if possible.

Hi,
go through this URL:
<a href="http://web.mit.edu/cao/www/SB2002/CR/VA01.htm">http://web.mit.edu/cao/www/SB2002/CR/VA01.htm</a>
Hope this will help you.
Thanks
Shiva

HT1277 I can recieve emails but I can't send them out. The blue bar at the bottom left of the Mail page gets half way across and then the pop-up "Cannot send message using the server" comes up? What do I do?

I have my Yahoo Mail "poped" over to Apple Mail. I can recieve emails but I can't send them out. The blue bar at the bottom left of the Mail page gets half way across and then the pop-up "Cannot send message using the server" comes up? What do I do?

Your outgoing mail server is different than your incoming server. Usually the outgoing mail server will have smtp in it. I noticed yours said "cannot send message using the server mail.wavecable.com". That sounds like an incoming mail server. Try setting your outgoing mail server to smtp.wavecable.com
I hope that helps.

"Cannot send message using the server....."

Hi all,
Considering the nature of the problem I am about to relate I would have to say at the outset that I would be very very surprised if other people have not come across this problem, so here goes...
We have around 60 users of Apple Mail from both 10.4 and 10.5, so varying degrees of versions of Apple Mail however most if not all are updated to 10.4.11 and 10.5.2.
We have been plagued with people being frustrated about emails bouncing back with an immediate error which is basically the following...
"Cannot send message using the server smtp.xxx.com:user
Sending the message content to the server failed.
Select a different outgoing mail server from the list below etc etc"
I am sure a lot of you have seen this error.
However, it is totally random but I am at the end of my tether with it. It generally revolves around emails with attachments and can be totally random. I was trying to send a screenshot today, very small screenshot, using the Apple-Shift-4 technique, sent the .png file, then saved it out as a .jpg, nothing. Tiny file, around 5k. Got the error above, took it out, sent no problem. Other similar files on the desktop refused to send but a .pdf did. I then thought it might be our server, so sent teh same attachments using my .mac account. Same result and failed to send. Reports from other users in our group show that they too get random results, maybe moving the attachment in the email makes it go, sometimes putting it before your signature, sometimes putting your signature copied and pasted in so many times makes it work, all sorts of methods but all resulting in the same conclusion, Apple Mail can be very unreliable.
We have even migrated some users to Entourage and the problem disappears. Even to Thunderbird, but those users miss the search capability as it is quicker and more reliable. So they want to go back.
Considering I have been struggling with this issue back in the day when we were on the Apple Mail related version in 10.4 I was hoping that the version released in 10.5 would remedy the problems. Sometimes I feel it has just got worse.
Is anyone else experiencing this sort of difficulty in Apple Mail, I really feel isolated and at a loss with how to remedy this for so many users.
If anyone can share their experiences and how they have got around similar issues in Mail I am all ears and open to any suggestions.
Thanks everyone for taking the time to read through this. There is more but the experiences are so random it is not worth trying to put it all down.
Thanks again.
Gerry McCoy

I went in to Connection Doctor and. oddly enough, for this Mac account it said I was on Port 25. Si I changed it to Port 587 and saved the changes.
Still, I have the same problem with the same error messages.
I go back to the mail preferences > Accounts > Advanced and it shows Port 143 still there grayed out.
What about SSL - it's not checked.
Odd that this problem only seems to be from one .mac account emailing to another .mac account. Could the server be down?

Error when sending message: 500 Internal Server Error

Hi
IE is not accepting any messages,
when I try to send the messgae to the IE ( using RWB) i am getting the below error " Error when sending message: 500 Internal Server Error".
following things what i have noticed.
1. Pipleline URL is fine, both in the BS of XI and in the RFC destnation which i am maintaing on the IE admin) URL is "http://<host>:8000/sap/xi/engine?type=entry"
2. SICF all the XI serivess are up and running, i am able to test these service.
3. The http port is active ( SMICM )
Pls note the error is 500 Internal Server Error
regards
Nisar

I think in a simple term 500 can be said as "the request cannot be processed curretnly", these options mentieoned by you are not applicable in my case.
This generally occurs due to load problem or if you are on an SP less than 12 or even if there is an administration problem---I am on PI7.0 , what are the administration problem you are talking about?
1 Check Table Space is enough. ---i had installed server recently & very few interface running.
2 Server licence Date or Time. In this case change system date and restart server.---i have recently installed server.
3 Check the service pack levels on your XI. If it is obsolete upgrade it with latest versio----Can u explain more on this?
Try restart the java stack(XI Server) and follwing services.
com.sapii.af.app ---I am not passing trough Adater framework, so i dont think this service will matters....
com.sapii.cpa.af.app.---CPA cahe is done sucessfully, as i said i am not passsing through adapter framework.
basically for a simple HTTP post what might cause 500 error if all necessary services are up and running?
regards
Nisar

Error Message: "Can't Send Message using the Server UCPB GEN"

Frequently i can't send emails from "UCPBGEN" "Gmail", "MSN" and "Yahoo". There are times i can, without changing any setting. The error message i am get is "Can't Send Message using the server..."
When i check connection doctor, they are all green.

What OS are you using?
Double-checking all settings is good. Along the way, one thing to try:
Have a look at your SMTP server settings to see if the port is set to "default" or "custom". If it is "default" try switching to custom using one of the numbers listed under "default". That fixed it for me on one of my accounts.
(To do all this: Mail, Preferences, Accounts, Outgoing Mail Server, Edit SMTP server list, Advanced.)
charlie

Cannot send message using the server (null)

i use mail 2.1.
i have a .mac account and have three other email accounts attached to my mail account.
lately, i cannot send any email.
the switchiing ports fix hasn't helped either.
this is the error message:
CANNOT SEND MESSAGE USING THE SERVER (null)
The server response was: 5.1.0 <email [email protected]>...
From address does not match authentication.
Use the pop-up menu below to try a different outgoing mail server. All messages will use this server until you quit Mail or change your network settings.
Message from: email <[email protected]>
Send message using: [there is a combo box here with all the four accounts servers listed]
no matter which one i pick it doesn't work and no email is sent.
anyone have this error before? or now how to fix it?
i'd be appreciative.
thanks
1.67 GHz Power PC PowerBook G4 Mac OS X (10.4.6) Sony HDR HC3 HD HandyCam MiniDV

I was having a similar problem (don't feel like typing all the details)
I was about to to delete my com.apple.mail.plist, when finally it hit me.
I ran ethereal (again, I'm sorry, but learning how to use ethereal is a topic unto itself). Following the TCP stream (ie. looking at the smtp messages being sent back and forth) I came across two problems. For some reason my port number was set to 567 or something like that, when it's supposed to be 25, as I had originally set it to.
Once I corrected the port number I started receiving an error message from the smtp server. It said the return email address could not be authenticated. (using xyz.com as an example) The correct return email address was supposed to be [email protected], but for some reason it was changed to john@xyz in the account settings.
Anyway, to get to the point, another thing to check is that your return address has been set correctly, and if all else fails, make sure you have X11 installed and use fink to install and run ethereal. This will let you know if you are actually connecting to the server, and will show you any error messages.
PS. I think this problem started occurring with the last update made to mail. I believe it somehow corrupted my settings. This would explain how my port number could have been changed to the default port number of .mac mail.

OSX Mail - Cannot send message using the server ....

Hi there,
Mac Pro with OSX 10.6.
*Can receive mail, but can no longer send email* using the program Mail.
Been getting the popup "Cannot send message using the server [shawmail.vc.shawcable.net] for the past 3 days. I hadn't changed anything about my computer, and have had the Mac for 2+ years. So this just started doing it on it's own.
I had a technical support guy from my service provider even interface with my computer, where he could see my desktop right over the internet, and he couldn't get it fixed either.
I googled this problem, and found solutions like:
1. Uncheck "Use SSL" (Done that, and it was never checked "on" to begin with)
2. Make sure Authentication is set to none, with no password (done that, and it wasn't set with a password to begin with)
3. Delete [user]/Library/Preferences/com.apple.mail.plist (done that, didn't do anything)
4. We even totally deleted my account, and started a new fresh one. Didn't work
The tech support guy did show me a way to email online, using the same email account. That worked, but it's a hassle to go onto a web-based email program -- it's not my preference. So, with great certainty, it's not my service provider, because I was able to send emails on this web-based email program using my email account.
So there, I'm stumped.
Hopefully someone can help. What's bizarre is that googling this problem, I have found many other people that say it happens arbitrarily, out of nowhere.

I can't believe how ridiculous this issue is. i have been searching for days for a solution to this. i have tried EVERY recommendation on these forums and nothing works. It appears that this issue dates back to TIGER. I had this problem back in January and just bagged figuring it had something to do with iweb. I bought a new html program and was able to send out my newsletter last month no problem. Suddenly, one month later- here i am again, unable to send out my newsletter with no help from Apple or verizon, or these forims, or anyone else. To think that a company that I have stood behind and loved so much can't be be bothered fixing such a simple issue that has been going on now through 5 OS's (I am using Lion but I had the issue using leopard as well) is a disgrace.

" Error while sending message: 500 Internal Server Error" RNIF Adapter

Hi,
I have configured B2B integration as   Sender : RNIF adapter & Receiver: XI Adapter.
I am able to test the configuration successfully in ESR and ID. But, whille testing with RWB using same test data, i am getting the following error:
Error while sending message: 500 Internal Server Errot.
     Could you anybody help me, what could be the reason? Even i am not getting any error messages in SXMB_MONI.
Thanks
Laxman

Hope this helps..
-Is the 500 internal SErver Error in RWB is only for this issue and the message is successfully processed in SXMB_MONI?
   Could be the PI Service User :PIAFUSER(Adapter framework user) login crendential issue or run out time error.
Try taking the payload from sxmb_moni and enter it in RWB > Adater engine> Test Message Tab > give proper sender interface information , enter payload and try sending message.   check what is behaviour

"Could Not Send Message Using The Server...:

I never have any trouble sending from Apple Mail, except now I am trying to do a mass-mailing for our business. Is there a limit on how many people you can BCC?
For the 1st message I put 200 people in the BCC field, and the message sends fine. Then I setup the another message with the next 200 people, and the send fails. Get a notice that Apple "Could Not Send Message Using The Server SMTPOUT.secureserver.net". And gives me the option of selecting other servers, neither of which work either.
I am curious, are there limits on how many people you can copy on one message?

Most, if not all ISPs and email account providers have similar limits per the following for personal/non-business email accounts as part of an overall effort to eliminate or reduce bulk spam emanating from the ISP's or email account provider's domain.
Any ISP or email account provider that doesn't impose similar limits is helping to contribute to the amount of spam that gets circulated.
.Mac has several safeguards in place to ensure that only .Mac members send messages with the Mac.com outgoing mail server.
Among them are reasonable limitations on:
The number of messages that can be sent each day (200 messages)
The number of recipients that can be sent to each day (400 recipients)
The number of recipients a message can be addressed to at one time (100 recipients)
There is also a 10 MB maximum size for messages sent or received using the .Mac mail system.

What are the settings for the outgoing mail server for icloud on Outlook for Mac, what are the settings for the outgoing mail server for icloud on Outlook for Mac

what are the settings for the outgoing mail server for icloud on Outlook for Mac, what are the settings for the outgoing mail server for icloud on Outlook for Mac

iCloud Mail Settings

I tried to send a mail message to too many addees. when the rejection came back "cannot send message using the server..." the window is too long to be able to see the choices at the bottom of it. how can i see the choices at the bottom of that window?

I tried to send a mail message to too many addees. when the rejection came back "cannot send message using the server..." the window is too long to be able to see the choices at the bottom of it. how can I see the choices at the bottom of that window?

I tried to send it through gmail and the acct is a POP acct
I'm not concerned about sending to the long address list. I just can't get the email and window that says "cannot send emai using the server..." to go away. The default must be "retry", because although I cannot see the choices at the bottom of the window if I hit return it trys again... and then of course comes back with the very long pop up window that I cannot see the bottom of so I can tell it to quit trying...

SOAP Receiver- Error While Sending Message: 500 Internal Server Error

Hello,
Our scenario: IDoc to SOAP
I have added a third party system in the SLD and have used the same in my ID configuration.
An idoc will be triggered from R/3, which will received in PI, PI will transform the IDoc into SOAP message for the third party system.
I have tested the scenario in ID from Interface Determination and its successful.
But when i try to try to test it from RWB, using Test Message in Adapter Engine, I get an error,
"Error while sending message:500 Internal server error"
If we test it using a testing software like SOAP UI, it works fine but from PI we get the error mentioned above.
Regards,
Abhishek

Hello,
Since the IDOC adapter resides on the ABAP stack, you can use this URL instead (it will be sent to the integration engine as Venkata suggested)
http://host:port/sap/xi/engine?type=entry
Also check your firewall settings from PI to the third-party system.
Hope this helps,
Mark
Edited by: Mark Dihiansan on Feb 7, 2012 11:48 AM

What are required to send message to MQseries server

Similar Messages

Maybe you are looking for