What are the different "Setup tables" in OF?
Hi all,
what are the different "Setup tables" in OF?
SOMASI
setup is depends on the various tables, for example the key flexfield structure data stores in the fnd_flex_values and the gl segments data stores in the gl_code_combinations. You have to go through from each setup.
Srini C
Similar Messages
-
What are the different methods to find the user-exit for any requirement?
Hi Everybody,
What are the different methods to follow to find the user-exit for any requirement?
Thanks & Regards,
Nagaraju MaddiThe following program search all the user exits involved with a T-code:
Selection Text: P_TCODE: Transaction Code to Search
Text Symbols: 001 - Enter the Transaction Code that you want to search through for a User Exit
REPORT z_find_userexit NO STANDARD PAGE HEADING.
*& Enter the transaction code that you want to search through in order
*& to find which Standard SAP® User Exits exists.
*& Tables
TABLES : tstc, "SAP® Transaction Codes
tadir, "Directory of Repository Objects
modsapt, "SAP® Enhancements - Short Texts
modact, "Modifications
trdir, "System table TRDIR
tfdir, "Function Module
enlfdir, "Additional Attributes for Function Modules
tstct. "Transaction Code Texts
*& Variables
DATA : jtab LIKE tadir OCCURS 0 WITH HEADER LINE.
DATA : field1(30).
DATA : v_devclass LIKE tadir-devclass.
*& Selection Screen Parameters
SELECTION-SCREEN BEGIN OF BLOCK a01 WITH FRAME TITLE text-001.
SELECTION-SCREEN SKIP.
PARAMETERS : p_tcode LIKE tstc-tcode OBLIGATORY.
SELECTION-SCREEN SKIP.
SELECTION-SCREEN END OF BLOCK a01.
*& Start of main program
START-OF-SELECTION.
* Validate Transaction Code
SELECT SINGLE * FROM tstc
WHERE tcode EQ p_tcode.
* Find Repository Objects for transaction code
IF sy-subrc EQ 0.
SELECT SINGLE * FROM tadir
WHERE pgmid = 'R3TR'
AND object = 'PROG'
AND obj_name = tstc-pgmna.
MOVE : tadir-devclass TO v_devclass.
IF sy-subrc NE 0.
SELECT SINGLE * FROM trdir
WHERE name = tstc-pgmna.
IF trdir-subc EQ 'F'.
SELECT SINGLE * FROM tfdir
WHERE pname = tstc-pgmna.
SELECT SINGLE * FROM enlfdir
WHERE funcname = tfdir-funcname.
SELECT SINGLE * FROM tadir
WHERE pgmid = 'R3TR'
AND object = 'FUGR'
AND obj_name = enlfdir-area.
MOVE : tadir-devclass TO v_devclass.
ENDIF.
ENDIF.
* Find SAP® Modifications
SELECT * FROM tadir
INTO TABLE jtab
WHERE pgmid = 'R3TR'
AND object = 'SMOD'
AND devclass = v_devclass.
SELECT SINGLE * FROM tstct
WHERE sprsl EQ sy-langu
AND tcode EQ p_tcode.
FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
WRITE:/(19) 'Transaction Code - ',
20(20) p_tcode,
45(50) tstct-ttext.
SKIP.
IF NOT jtab[] IS INITIAL.
WRITE:/(95) sy-uline.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
WRITE:/1 sy-vline,
2 'Exit Name',
21 sy-vline ,
22 'Description',
95 sy-vline.
WRITE:/(95) sy-uline.
LOOP AT jtab.
SELECT SINGLE * FROM modsapt
WHERE sprsl = sy-langu AND
name = jtab-obj_name.
FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
WRITE:/1 sy-vline,
2 jtab-obj_name HOTSPOT ON,
21 sy-vline ,
22 modsapt-modtext,
95 sy-vline.
ENDLOOP.
WRITE:/(95) sy-uline.
DESCRIBE TABLE jtab.
SKIP.
FORMAT COLOR COL_TOTAL INTENSIFIED ON.
WRITE:/ 'No of Exits:' , sy-tfill.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(95) 'No User Exit exists'.
ENDIF.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(95) 'Transaction Code Does Not Exist'.
ENDIF.
* Take the user to SMOD for the Exit that was selected.
AT LINE-SELECTION.
GET CURSOR FIELD field1.
CHECK field1(4) EQ 'JTAB'.
SET PARAMETER ID 'MON' FIELD sy-lisel+1(10).
CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN. -
What are the different kinds of tools available to cleanup the siebel file
Hi All,
Please let me know What are the different kinds of tools available to cleanup the siebel filesystem.
Thanks in advance
Tusarassuming that you installed Siebel Server under d:\D:\dba81
cd D:\sba81\siebsrvr\bin
1) reporting mode
sfscleanup.exe /u SIEBEL-USER /p SIEBEL-PASSWORD /C SIEBEL-DATA-SOURCE /d SIEBEL-TABLE-OWNER /f SIEBEL-FILE-SYSTEM /m SIEBEL-FILE-SYSTEM-FOR-INCORRECT_FILES /r Y /x "D:\sba81\siebsrvr\log\sfscleanup_report.log"
2) Real execution
Replace /r Y by /r N
Best Regards
EvtLogLvl -
What are the different types of parameters available in function builder an
What are the different types of parameters available in function builder and where do we use them.
The different type of parameters available in FM are
Import - They are used to pass the values to the function module.
Export- They are used by FM to pass the result back to the calling program.
Changing - The variables are passed to the FM and can be changed during the FM processing.
Tables - Internal tables can be passed to the FM (it works similar to changing parameter). -
What are the different functions used in sap script?
Hi,
What are the different functions used in sap script? What are the parameters used in each Function?
Regards,
Maheshhe print program is used to print forms. The program retieves the necesary data from datbase tables, defines the order of in which text elements are printed, chooses a form for printing and selects an output device and print options.
Function modules in a printprogram:
When you print a form you must used the staments OPEN_FORM and CLOSE_FORM. To combine forms into a single spool request use START_FORM and END_FORM.
To print textelements in a form use WRITE_FORM. The order in which the textelements are printed, is determined by the order of the WRITE_FORM statements. Note: for printing lines in the body, you can also use the WRITE_FORM_LINES function module.
To transfer control command to a form use CONTROL_FORM.
Structure of a print program
Read data
Tables: xxx.
SELECT *
FROM xxx.
Open form printing - Must be called before working with any of the other form function modules.
Must be ended with function module CLOSE FORM
call function 'OPEN_FORM'.....
To begin several indentical forms containing different data within a single spool request, begin each form using START_FORM, and end it using END_FORM
call funtion 'START_FORM'.....
Write text elements to a window of the form
call function 'WRITE_FORM'.....
Ends spool request started with START_FORM
call funtion 'END_FORM'.....
Closes form printing
call function 'CLOSE_FORM'...
OPEN_FORM function
Syntax:
CALL FUNCTION 'OPEN_FORM'
EXPORTING
APPLICATION = 'TX'
ARCHIVE_INDEX =
ARCHIVE_PARAMS =
DEVICE = 'PRINTER'
DIALOG = 'X'
FORM = ' '
LANGUAGE = SY-LANGU
OPTIONS =
MAIL_SENDER =
MAIL_RECIPIENT =
MAIL_APPL_OBJECT =
RAW_DATA_INTERFACE = '*'
IMPORTING
LANGUAGE =
NEW_ARCHIVE_PARAMS =
RESULT =
EXCEPTIONS
CANCELED = 1
DEVICE = 2
FORM = 3
OPTIONS = 4
UNCLOSED = 5
MAIL_OPTIONS = 6
ARCHIVE_ERROR = 7
INVALID_FAX_NUMBER = 8
MORE_PARAMS_NEEDED_IN_BATCH = 9
SPOOL_ERROR = 10
OTHERS = 11
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Some important parameters:
FORM Name of the form
DEVICE
PRINTER : Print output using spool
TELEFAX: Fax output
SCREEN: Output to screen
OPTIONS Used to control attrubutes for printing or faxing (Number of copies, immediate output....
The input for the parameter is structure ITCPO.
CLOSE_FORM function
CALL FUNCTION 'CLOSE_FORM'
IMPORTING
RESULT =
RDI_RESULT =
TABLES
OTFDATA =
EXCEPTIONS
UNOPENED = 1
BAD_PAGEFORMAT_FOR_PRINT = 2
SEND_ERROR = 3
SPOOL_ERROR = 4
OTHERS = 5
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Paramerters:
RESULT Returns status information and print/fax parameters after the form has been printed. RESULT is of structure ITCPP.
WRITE_FORM function
CALL FUNCTION 'WRITE_FORM'
EXPORTING
ELEMENT = ' '
FUNCTION = 'SET'
TYPE = 'BODY'
WINDOW = 'MAIN'
IMPORTING
PENDING_LINES =
EXCEPTIONS
ELEMENT = 1
FUNCTION = 2
TYPE = 3
UNOPENED = 4
UNSTARTED = 5
WINDOW = 6
BAD_PAGEFORMAT_FOR_PRINT = 7
SPOOL_ERROR = 8
OTHERS = 9
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Some important parameters:
ELEMENT Specifies which textelement is printed
WINDOW Specifies which window is printed
TYPE Specifies the output area of the main window. This can be:
TOP - Used for headers
BODY
BOTTOM - Used for footers
FUNCTION Specifies whether text is to be appended, replaced or added
Example of how to use the WRITE_FORM function module together with a script.
Form layout of the MAIN window
/E INTRODUCTION
Dear Customer
/E ITEM_HEADER
IH Carrier, Departure
/E ITEM_LINE
IL &SBOOK-CARRID&, &SPFLI-DEPTIME&
/E CLOSING_REMARK
The print program
Writing INTRODUCTION
CALL FUNCTION 'WRITE_FORM'
EXPORTING
ELEMENT = 'INTRODUCTION'
FUNCTION = 'SET'
TYPE = 'BODY'
WINDOW = 'MAIN'
EXCEPTIONS
OTHERS = 8
Writing ITEM_HEADER
CALL FUNCTION 'WRITE_FORM'
EXPORTING
ELEMENT = 'ITEM_HEADER'
FUNCTION = 'SET'
TYPE = 'BODY'
WINDOW = 'MAIN'
EXCEPTIONS
OTHERS = 8
Set ITEM_HEADER into TOP area of main window for subsequent pages
CALL FUNCTION 'WRITE_FORM'
EXPORTING
ELEMENT = 'ITEM_HEADER'
FUNCTION = 'SET'
TYPE = 'TOP'
WINDOW = 'MAIN'
EXCEPTIONS
OTHERS = 8
Write ITEM_LINE
LOOP AT .....
CALL FUNCTION 'WRITE_FORM'
EXPORTING
ELEMENT = 'ITEM_LINE'
FUNCTION = 'SET'
TYPE = 'BODY'
WINDOW = 'MAIN'
EXCEPTIONS
OTHERS = 8.
ENDLOOP.
Delete ITEM_HEADER from TOP area of main window
CALL FUNCTION 'WRITE_FORM'
EXPORTING
ELEMENT = 'ITEM_HEADER'
FUNCTION = 'DELETE'
TYPE = 'TOP'
WINDOW = 'MAIN'
EXCEPTIONS
OTHERS = 8
Print CLOSING_REMARK
CALL FUNCTION 'WRITE_FORM'
EXPORTING
ELEMENT = 'CLOSING_REMARK'
FUNCTION = 'SET'
TYPE = 'BODY'
WINDOW = 'MAIN'
EXCEPTIONS
OTHERS = 8
START_FORM function
CALL FUNCTION 'START_FORM'
EXPORTING
ARCHIVE_INDEX =
FORM = ' '
LANGUAGE = ' '
STARTPAGE = ' '
PROGRAM = ' '
MAIL_APPL_OBJECT =
IMPORTING
LANGUAGE =
EXCEPTIONS
FORM = 1
FORMAT = 2
UNENDED = 3
UNOPENED = 4
UNUSED = 5
SPOOL_ERROR = 6
OTHERS = 7
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
END_FORM function
CALL FUNCTION 'END_FORM'
IMPORTING
RESULT =
EXCEPTIONS
UNOPENED = 1
BAD_PAGEFORMAT_FOR_PRINT = 2
SPOOL_ERROR = 3
OTHERS = 4
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CONTROL_FORM function
The CONTROL_FORM function module alows you to create SapScript control statements from within an APAB program.
Syntax:
CALL FUNCTION 'CONTROL_FORM'
EXPORTING
command =
EXCEPTIONS
UNOPENED = 1
UNSTARTED = 2
OTHERS = 3
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Example:
Protecting the text element ITEM_LINE
CALL FUNCTION 'CONTROL_FORM'
EXPORTING
COMMAND = 'PROTECT'.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
TEXELEMENT = 'ITEM_LINE'.
CALL FUNCTION 'CONTROL_FORM'
EXPORTING
COMMAND = 'ENDPROTECT'. -
What are logistics and setup tables?
Hi,
What are logistics and setup tables?? How are these two related?
Regards,
SnehHi,
Logistics is the management of the flow of goods, information and other resources, including energy and people, between the point of origin and the point of consumption in order to meet the requirements of consumers (frequently, and originally, military organizations). Logistics involves the integration of information, transportation, inventory, warehousing, material-handling, and packaging, and occasionally security. Logistics is a channel of the supply chain which adds the value of time and place utility.
setup tables- are used to full the data for logistic applications.setup table are used for initialization and full loads.As there will be large number of data for logistic application first it will be fetched into setup tables then from there it will be used for initialization and full loads.
Regards,
Ravi -
What are the functions of tables in ods
Hi,
what are the functions of tables in ods.
new data table
change log table
active data table.
How 0recordmode work with these 3 tables.
and how sid will work with ods?
can anyone give detailed explanation.
please do not give sap help links.
Thanks,
madhu
ThanksHi,
new table holds the "new" loaded data in ODS. If you start a new request to load data in your ODS, it firstgoes to table new data. Then you normally activate data either manually or by process chain. Then the daa will be copied over from new to active table. The change log table holds the delta information, what will change during activation or which records will be overwritten with new data or which data is new at all.
With recordmode you can specify which update mode will be used or more excalty which delta mode will be used. SID is necessary for master data, because ODS will only hold the SID values of the used characteristivcs and not the characteristic values itselfs. It's part of normalization used in BI.
For more details I recommend to look here in SDN, go to a class or read help.sap.com pages.
Regards,
Juergen -
What are the master data tables for 'Plant'?
Hi friends,
What are the master data tables for 'Plant' that contain below data?:
PLANT
NAME1
NAME2
LANGUAGE
HOUSE_NUM_STREET
PO_BOX
POSTAL_CODE
CITY
COUNTRY_KEY
REGION
COUNTRY_CODE
CITY_CODE
TIME_ZONE
TAX_JURISDICTION
FACTORY_CALENDAR
Thanks a lot!Hi,
Plz try out following tables for your requirement.
TOO1W
ADRC
J_1IMOCOMP
T001W : werks TYPE t001w-werks, "PLANT
name1 TYPE t001w-name1, "PLANT DESCRIPTION
adrnr TYPE t001w-adrnr, "PLANT ADDRESS NUMBER
ADRC: addrnumber TYPE adrc-addrnumber, "ADDRESS NUMBER
str_suppl1 TYPE adrc-str_suppl1, "STREET2
str_suppl2 TYPE adrc-str_suppl2, "STREET3
street TYPE adrc-street, "STREET
city1 TYPE adrc-city1, "CITY
post_code1 TYPE adrc-post_code1, "CITY POSTAL CODE
post_code2 TYPE adrc-post_code2, "PO Box postal code
tel_number TYPE adrc-tel_number, "TELEPHONE NUMBER
fax_number TYPE adrc-fax_number, "FAX NUMBER
str_suppl3 TYPE adrc-str_suppl3, "STREET4
location TYPE adrc-location, "STREET5
city2 TYPE adrc-city2,
For Tax Details :
J_1IMOCOMP : werks TYPE j_1imocomp-werks,
j_1icstno TYPE j_1imocomp-j_1icstno,
j_1ilstno TYPE j_1imocomp-j_1ilstno,
Hope this will help.
Regards,
Archana -
What are the different ports required to Deploy(Run) an application in NWDS
Hi all,
We have a issue here in deploying our application in NWDS. As we are accessing our servers(from another country) thru firewalls in between, most of the ports are blocked for security reasons,henceforth, we are unable to deploy our application in NWDS.
Initially port 3601 was blocked, now its open.when i try to deploy my application , it prompts for a SDM password, after i enter it , it gives me error saying it can't process thru 50018 port.
So my query is , to build,deploy and run or debug a application in NWDS what are the different ports that needs to be accessable ?( so that i can tell my basis guys that all this specific ports need to be opened )
(Note: will the SDM port, debug port,Http port be enough to deploy and run an application)
Need your help on this
Regards,
VijayHi Arun,
Thanks for your reply, as you told port 3601, its already opened. I didnt understand about the 3200,3300,3299. Can u be more clear about why each of this port is used for? ( bcoz i need to give a reason to my Basis guys,what each port is for)
Hope this Log details of the error that I get here helps you:-
<i>Settings
SDM host : "ServerName"
SDM port : 50018
URL to deploy : file:/C:/DOCUME1/abap1/LOCALS1/Temp/temp22390Welcome.ear
Deployment exception : Server "srvName" did not accept login request as admin on port 50018. Details: ERROR: Could not establish connection to server "srvName" at port 50018: "srvName"
Inner exception was :
Server "srvName" did not accept login request as admin on port 50018. Details: ERROR: Could not establish connection to server "srvName" at port 50018: "srvName"</i>
appreciate your valuable inputs. -
What are the different types of analytic techniques possible in SAP HANA with the examples?
Hello Gurus,
Please provide the information on what are the different types of Analytic techniques possible in SAP HANA with examples.
I would want to know in category of Predictive analysis ,Advance statistical analysis ,segmentation analysis ,data reduction techniques and forecast techniques
Which Analytic techniques are possible in SAP HANA?
Thanks and Regards
Sushma C NarasimhamurthyHi Sushma,
You can download the user guide here:
http://www.google.com.au/url?sa=t&rct=j&q=&esrc=s&source=web&cd=2&ved=0CFcQFjAB&url=http%3A%2F%2Fhelp.sap.com%2Fbusinessobject%2Fproduct_guides%2FSBOpa10%2Fen%2Fpa_user_en.pdf&ei=NMgHUOOtIcSziQfqupyeBA&usg=AFQjCNG10eovyZvNOJneT-l6J7fk0KMQ1Q&sig2=l56CSxtyr_heE1WlhfTdZQ
It has a list of the algorithms, which are pretty disappointing, I must say. No Random Forests? No ensembling methods? Given that it's using R algorithms, I must say this is a missed opportunity to beat products like SPSS and SAS at their own game. If SAP were to include this functionality, they would be the only BI vendor capable of having a serious predictive tool integrated with the rest of the platform.... but this looks pretty weak.
I can only hope a later release will remedy this - or maybe the SDK will allow me to create what I need.
As things stand, I could built a random forest using this tool, but I would have to use a lot of hardcoded SQL to make it happen. And if I wanted to go down that road, I could use the algorithms that come with the Microsoft/Oracle software.
Please let me be wrong........ -
What are the different steps to follow in order to develop an application and deploy it into a PAC
Hi,
I developped a program on my computer but in order to deploy it in a PAC , I don't know what are the different steps to follow?
What are the difference between a stand alone application and communication with server mode.
Can the file which will be downloaded into the PAC be in a form othre than (.exe).
what does the deployment licence consist of??? is it a software?
if the file is .exe then how to maintain it?
Thank you for all,
RegardsHi!
Since I'm familiar with FieldPoint PACs, I'll refer to that (but maybe it is similar for cRIO...).
An embedded application (standalone), runs entirely and independently on the PAC, while if you're not doing this, you'll have your computer, with LabView, which is controlling the PAC. In this mode, application is dowloaded in PAC's RAM, so when you reboot controller, application will be lost. If you build an embedded application, you can provide for application to boot authomatically at boot, each time the PAC reboots. These are some basic stuffs on embedded applications with LV.
To deploy an application to a PAC, you need LabVIEW + Real-Time module. Without it, you can't build an embedded application on PACs.
usually, the file dowloaded is an .exe, and some libraries. What would you like to have, exactly? For example, I think you can buy a simple .exe, which is universal, which loads VIs dinamically, so you can download directly VIs, but I've never tried this way....
Deployment license, I think, refer to PCs, id est, when you use a PC or PXI as embedded target, in PACs, you have it bundled (it seems to me) whit the PAC you buy, so you don't have to buy an extra license for every PAC you ship with your application. Otherwise, if you develop a Real-Time application for a PC, you will ship PC + OS licensed + Real-Time extension licensed, but this is not your case, since you'll use PACs.
The maintain problem... I've already faced with! Simply, for my needs it was enough to make an application which loads configuration files, depending on different task the controller has to do. If you have to dowload a completely new version of VI.... it's better to deploy new application from LV. But maybe you can bypass this problem with dinamic VIs loading...
Let me know if this help.... Have a nice day!
graziano -
What are the different ways to upload file data to SAP? Please help
Hi Experts,
I have to transfer huge file data (few lakhs records) to SAP business transaction. What are the different ways to do the same? I have heard of BDC and LSMW. But are there any more options?
Which option is best suited for huge file data?
Is LSMW an old technology and SAP will not support it any more?
Kindly answer my queries at the earliest.
I will be greatful to you if you can help me.
Thanks
Gopalfor uplodig data to non sap we have 2 methodes
i) if u know bapi u will use lasm
2) bdc
but u mentioned so many records isthere
best thing is u will uplode all record sto al11 using XI interface
then u have to write bdc / lsmw program
beter to go for lsmw before that u will find bapi
if u will unable to find bapi
u have to create bapi and use it in lasmw
ofter that u have schedule the lsmw program as a bockground
then u have to create a job for it
and release from sm 37
then u have to moniter through bd87
if u want to go through i will help u.
if it is usefull to u pls give points
Saimedha -
What are the different kind of parameter/attributes we can set in XI ?
Hi Experts
Yesterday i have attended an interview ....one question was
1) What are the different knid of parameters we can set in XI ? Have done ?
what and all the cases we will set the parameters/Attributes?
and one more was
2) How will you do Stress testing in XI ?
Awaitng for responses
Adv thax and regards
Kiran lvsHi,
1) What are the different knid of parameters we can set in XI ? Have done ?
what and all the cases we will set the parameters/Attributes?
-First you should ask in which stage or where do you want to configure parameters ,i mean Whatever parameters we can set in XI all comes under this question like all sort of Adapters,each of adapter can have its own set of configuration , configuration parameters,XI admin config parameters.. etc..
and one more was
2) How will you do Stress testing in XI ?
In general stress tesing will be done by testing team
Stress testing by way of sending more messages and performance also
see the below links
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/3a67c790-0201-0010-89aa-d27d97dd1374
Rules of thumb on size of messagetypes in XI
/people/sravya.talanki2/blog/2006/02/28/simulating-xi-messages-proto
Measure Performance
Regards
Chilla.. -
What are the Different Ways of receiving Acknowlegements ?
Hi Experts,
Can you please let me know what are the Different Ways of receiving Acknowlegements from target system as a response to the Message sent from source system.
As when we send Idoc to target system acknowledgement is sent through XI to Source system, what are the configuration steps required for it. Can we use Webservice or link which can be provided to target/customer system and acknowledgement is confirmed using this medium. Please suggest any possible option.
Where I can find the related information or standard document about the same.
Please guide.
Regards,
NitinHi ,
Can you please let me know what are the Different Ways of receiving Acknowlegements from target system as a response to the Message sent from source system.
System acknowledgments used by the runtime environment to confirm that an asynchronous message has reached the receiver.
Application acknowledgments used to confirm that the asynchronous message has been successfully processed at the receiver
These are of positive or Negative.
As when we send Idoc to target system acknowledgement is sent through XI to Source system, what are the configuration steps required for it. Can we use Webservice or link which can be provided to target/customer system and acknowledgement is confirmed using this medium. Please suggest any possible option.
This is based on your souce system to accept the ack, what is the protocol used to communicate with the source system.
http://help.sap.com/saphelp_nw04/helpdata/EN/55/65c844539349e9b1450581ab44a5e6/frameset.htm
Regards
Harsha Paruchuri -
What are the different types of bind that we can use to configure COREid?
Hi
What are the different types of LDAP bind that we can use to configure COREid?
Thanks for your input.(http://download-west.oracle.com/docs/cd/B28196_01/idmanage.1014/b25343/idconfig.htm#BABGAECB)
7.5.2 Creating an LDAP Directory Server Profile
Maybe you are looking for
-
Inter company cheque payment through F110
Hi all, what customization needs for intercompany payments through F110. i customized settings, but cheques are not generated. can any one kindly tell me details of this settings. points will be awarded. Rgds, Soma
-
How to skip the Analysis level in the workflow for manual investigation?
Hi Experts, My requirement is to bypass the Analysis level for manual investigation in the workflow template number WS15100038. I tried to set the 'skip first decision step?' step as true to bypass the analyst level by setting the container element
-
Redo log files are not applying to standby database
Hi everyone!! I have created standby database on same server ( windows XP) and using oracle 11g . I want to synchronize my standby database with primary database . So I tried to apply redo logs from primary to standby database as follow . My standby
-
BEx query selection screen takes long time to popup
Hi, I have a query which is taking long time to popup the selection screen. I have tried in RSRT the generate report option, the generating report takes 45 to 60 mins. After the report is generated the query selection screen comes up in couple of sec
-
SOAP vs RFC - performance and pros and cons
Hi, I have been playing around with the SAP .NET Connector 2.0 between an ASP.NET 1.1 application and SAP passing in either SOAP or RFC connection strings to the proxy classes as a proof of concept for some integration work required for our existing