What are the *smw files? Will they reinstall the original applications of my Toshiba laptop?

I did a clean installation of Windows 7 (64 bits) in my E105-S1402. I installed the Toshiba Software Installer for Windows 7 and I got the drives and updates from it.
I also download all the drives, updates and patches from Toshiba for Windows 7 (64 bits) at http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/modelContent.jsp?ct=SB&os=&category=&moid=214052...
I was trying to reinstall the software that was preinstalled in the laptop or in the recovery discs (for example the software for watching DVD movies, etc...) so I thought that Toshiba Software Installer would reinstall those applications but it did not do it Then I inserted the second DVD of the recovery discs in the laptop's DVD drive and I saw: preinst6.smw, preinst7.smw..... preinst11.smw I guess that they are the applications that were installed in my computer before but I am not sure.
If I click in any of these files then will I be able to reinstall the preinstalled applications?
Does anybody what these *.smw files are?
Thanks in advance for any answer or advice.
Truly your,
Javier

Have you tried putting the first disc in while in Windows? It may bring up an option menu to install applications and drivers and a recovery option.

Similar Messages

What are the compatible applications to nano 4th gen?

What are the compatible applications to nano 4th gen?

There are no apps that work on the iPod Nano. Apps are exclusive to the iPod Touch and iPhones. You can buy games for your iPod Nano in the iTunes Store though. They're the closest thing to apps for the Nano.

What are the standard Application tool bars used in reports

Hi All,
What are the standard application tool bars used in the report/program?
Thanks in advance
Regards
Chakri

Hi,
Goto SE41,
Programs : SAPLKKBL
Status : STANDARD
Thanks,
Best regards,
Prashant

What are the Application avaliable in Apple Iphone 4s? i wanna that application details?, what are the Application avaliable in Apple Iphone 4s? i wanna that application details?

I wanna know what are the defalut application will come iphone 4s.

So they doing the ye'old monkey in the middle routine, eh? Well I'm not a monkey and neither is anyone else(!)
AT&T is saying they aren't doing it, and that if my phone decides to crap out that I will have to see if Apple will replace my phone. But she said even though they have no involvement nor allowance with this carrier version update, that it is between apple and the federal agency requesting these updates, that she will document and send the complaint to the people at AT&T that are working on carriers updates with them.
I also stated to the rep, that there is some chatter stating the updates are being implemented by AT&T. The rep denied any such information.
I also asked the rep, if there has been any customer complaints or concerns brought to AT&Ts attention today in regards to Carrier Version Updates? The reps response was "no, this is a first"
What I am experiencing: LTE or WiFi: these OTA Forced updates are unexpected and with out advanced notice.
This is the second time I've witnessed this while the device is in use that this OTAFU comes through. There is a data cap on bandwidth, so I think the OTAFU is hogging bandwidth and other resources, which in turn is making any other apps in use choke for bandwidth and other resources while the update is taking place.
I still have the Government Alerts with the 14.2 CU.
I do believe this is IOL and Data Redundancy which is causing technical debt to grow exponentially out of control.
Amber Alerts are great, useful, and helpful - but there is an App for that, a text message, and an email alert system.
Emergency Alerts are great, and useful - BUT there are many apps and signals for that as well as being broadcasted on TV, Radio, FiOS, And Cable.
Simply all too much(!) When is enough enough?
What is the backup system to the government emergency alerts system, if we are unable to access any form of electronic communications?

What were the original speakers for the G3 B&W PowerPC?

I am looking to get a set of speakers to go with the cherry 21" CRT Studio Display I picked up (it still has the clear plastic on the apple logos). What are the original speakers that would have been available for this computer? Will any of the the harmon kardon spheres or sound sticks work with this mac? What is a Digital Sound Port (is it just a fancy way of saying L/R/Ground/DC-Power on a four-pin jack like the appletalk mics)? Is USB 1.0 fast enough to run the spheres that were available with the G4 Cube? I am seeking historical accuracy without going beige. Any oldtimers that can remember that far back please offer your sugestions.
Hooked on the Shape

Hi, funkymonkeypie -
The B&W G3 models did not come with any external speakers as a standard option; the only speaker they came with was the built-in mono one.
All Macs prior to the G4 Digital Audio model (except the Cube) had analog sound out ports. The Cube had a special external USB amplifier arrangement.
Not positive, but I believe the USB ports on the B&W G3 were USB 1.1, not 1.0, and are the same as the ones on the Cube. Don't know if the amp and speakers that came with the Cube will work on the B&W.
Don't know the answers to your other questions - perhaps someone else will post in with those.

I bought MacBook Pro a year back I want to know what were the original specs of hardware of this product as I believe that I have been cheated s

Hi, I bought this MacBook Pro a year back , as I am not a professional and for me Apple is a brand that one can buy any product while eyes shut. I told the sales man at the iStore is DHA, Sector H, Lahore/Pakistan, that I am new to apple and reason to buy this product is that I am going to learn 3dMax and Autocad and photoshop on this machine. He reccomended me this machine that I am using right now. After a year when I found a graphic instructor he checked the hardware and he said that the processor is very old and he was surprised. Herer are the specs :
MacBook Pro
Model Identifier:          MacBookPro7,1
Processor Name:          Intel Core 2 Duo
Processor Speed:          2.4 GHz
Number Of Processors:          1
Total Number Of Cores:          2
L2 Cache:          3 MB
Memory:          4 GB
Bus Speed:          1.07 GHz
Boot ROM Version:          MBP71.0039.B0B
SMC Version (system):          1.62f6
Serial Number (system):          WQ03******ATM
Sudden Motion Sensor:
State:          Enabled
He said that knowing that I am going to use this machine for graphics, they have actually fooled you, Kindly tell me what are the original specs of this machine S# . I believe that iStores are licensed , kindly help me out, I have given a complete price , but it seems i just paid huge price of Apple sign and the body of this machine. Please help me and tell me how to take actions . I will really appreciate.
Thanks
Aresha

Aresha wrote:
Thanks Kappy, could you please how to contact Apple , through email , I will appreciate if you could kindly guide me where to submit my question as I could not find the email contact. will appreciate your reply. Thank you once again.
Apple does not provide support via email or publish email contact addresses. You will have to use the other channels that are offered.
What question(s) do you still want to ask? At worst, you bought a MacBook Pro that had just been discontinued after ten months in production. A week or two before you bought it, it was still the latest 13" model. If you bought it at the very beginning of last February, it was still the latest model then, and the seller didn't know any more than you did about the new models that would be released later that month. While it is a common practice among Mac resellers to offer a small discount on discontinued models after new models are released, resellers are under no obligation to do so, and in any case it is always up to the buyer to determine exactly what he or she is buying and to research whether or not it's fit for his or her purpose. Apparently you didn't do either. If you have any grounds at all for a dispute (which is doubtful in my view), the dispute is with the local reseller, not with Apple, who does not control the pricing or practices of resellers.
You are probably finding, or have already found, that a 13-inch MBP with only integrated graphics processing is inadequate for the uses you hope to make of it. You will need a more powerful machine with a discrete graphics processor and a larger screen for the work you have in mind. Even the current 13" MBPs wouldn't suffice for that — a 15" MBP is the minimum that would do. Sell your machine to someone whose work will be less demanding, and get a new MBP that will meet your needs.

An Entire cup of coffee was spilled on the side of my MacBook Pro, it was in my purse, port side up. They were filled. I'm assuming the board or whatever is fried. If I go to apple tomorrow, what are the odds that my hard drive will be salvageable?

I'm usually good at backing up my photos and documents, but the last 2 months of pictures and videos are on there and not backed up anywhere. I'm heartbroken.

"What are the odds that my hard drive will be salvageable?"
Very very good, it's all sealed and only a large electrical surge or dropping it while running could do some damage.
Take it and use a SATA to USB adapter you can get online for $12-$40 and hook it right up to the new Mac and use Setup Assistant or Migration Assistant to transfer files.
OR you can access the drive directly and on a PC with MacDrive installed.
However the Mac itself is likley a goner.

What are the questions they will ask for output determination?

hi gurus very good evening,
pls... can anybody give the details for output determination.
what are the settings we to configure in the system for o/p determination?
thanks all
arun
Message was edited by:
arunteja vasan

Hi,
You need to know the process.
Output determination works as per follows:-
1.First you will have to create a output type.
2.Assign output program to this output type either SAP script or Smartform.
3.Assign this output type in output determination procedure along with the desired access sequence.
4.Assign this output determination procedure to your document type Order/Delivery/Billing
5.Maintain the condition record for the access sequence or you can maintain manualy in order/delivery/Billing
6.You can also add the output type manually in the order/Delivery/Billing.
7.Once you assign this output then only you will be able to see the print preview.
Reward points if helpful.
Regards,
Amrish Purohit

There are many jre exe files: what are the differences and which I choose?

Having some problems, that I will describe in another message, I was looking for the latest jre.
I saw that on www.java.com there is 6 update 1, whereas on www.sun.com there is already 6 update 2. So, I would like to know when an update is made available on www.java.com and through automatic updates?
Also, I saw different names, and I would like to understand in an exact way what are the differences:
jre-6-windows-i586.exe;
jre-6-windows-i586-iftw.exe;
jre-6u1-windows-i586-p-s.exe;
jre-6u1-windows-i586-p-iftw.exe;
jre-6u2-windows-i586-p.exe;
jre-6u2-windows-i586-p-iftw.exe;
I understand that te iftw part means the it is a small download, only the setup module. But why there are some files that end with "-p", some with "-p-s", sm with "-i586"?
Thank You
Rodolfo Giovanninetti

The question mark icon on the dlls indicates that LabVIEW is unsure of
the location of the DLL, or is unable to locate the DLL on your
system. This can happen if the DLLs do not exist, or if the "Call
Library Function Node" just specifies the name of the dll, and not the
entire path to the dll. IVI and Instrument driver VIs will
typically not supply the entire path to the DLL, whch would cause the
question mark icon to appear.
If your application is working properly, then you should ignore the
question mark in the dependencies list. If your application is
broken because the DLLs cannot be found, they are installed with the
following drivers:
ivi.dll is installed with the IVI compliance package, which is available at the following link:
Drivers and Updates: IVI Compliance Package
You should also install the latest version of NI-VISA, which is required by the IVI Compliance Package:
Drivers and Updates: NI-VISA
ag3325b_32.dll is installed with the your instrument's IVI driver, which can be found below:
Agilent 3325b Instrument Driver
Jason S.
Applications Engineer
National Instruments

What are the chances that an actual timestamp will be added to the Canon XF200 ?

I shoot depositions for a living and a timestamp is required sometimes. I upgraded to the XF200 from the XHA1s. the XHA1s had a timestamp so i assumed the XF200 would as well. I saw inthe manual that the time and date could be displayed so I bought the camera. you have to manually turn off all displays except the date and time. This works as long as you dont have to change your aperture, wb, or other settings. When you change any of these the display pops up and is also recorded. I'm just wondering why Canon would get rid of the timestamp. I asked if they could add it using a firmware update but all they said was that enough people need to ask for it. What is enough?

"What are the odds that my hard drive will be salvageable?"
Very very good, it's all sealed and only a large electrical surge or dropping it while running could do some damage.
Take it and use a SATA to USB adapter you can get online for $12-$40 and hook it right up to the new Mac and use Setup Assistant or Migration Assistant to transfer files.
OR you can access the drive directly and on a PC with MacDrive installed.
However the Mac itself is likley a goner.

What are the advantages of idoc compare to flat file. how data is secure

what are the advantages of idoc compare to flat file. how data is secure in idocs compare to flat file

Hi Ramana,
In simple words, Main advantage with idoc over flat file is security....
I will explain you some scenario here U got a flat file with all the data...Now u r having the flat file if you want u can modify the data in it, or somehow any one can modify the data in it if they were able to access this file. That means u maintained the file in the presentation server
One level of higher security to the above level is maintaining the flat file in application server, at point also even though lot of people r not having the access to that file, super user who is having the access may modify the data or delete the data from it rite....
so in both of those levels u don't have 100% security...
So there come to the picture of idocs, Idocs simply data carriers, those r generated by a program but not manually...data will be divided into number of segments based upon ur program. So manually its not so easy to modify the data in these idocs. If any changes to be made in the data then u have to modify the data in the application and then u have to update the idoc or you have to generate the new idoc with that corresponding data. so in this case not even super user can manipulate the data directly in the idoc....
I think u got my point what I mean to say.....
If you find it useful mark the points
~~Guduri

What are the steps if; the disk cannot be partitioned because some files cannot be moved

I'm to install windows XP software, and I can partition the disk. If state, "The disk cannot be partitioned because some files canot be moved." What are the steps to complete partition to install windows XP?

Ok what happens with Bootcamp is it needs to carve out a contiguous free space at the bottom of your hard drive.
If it can't do that then it can't make the partition.
What has happened is there are some files down in closer in the bottom part of the drive, this occurs if you've had a hard drive nearly full, performed a software update, installed programs and then removed some files leaving parts and large empty spaces.
So what to do to fix this?
Well your going to have to learn how to clone your OS X boot partition, with all your programs and files to a external drive, which you can then hold the option key and boot from it.
Then you run Disk Utility from the clone, erase the OS X partition on the internal drive and clone everything right back.
This will place everything in order, move everything up and nice and compact at the top of the drive, which will allow you to make a BootCamp partition as big as you have room for.
It will also make your comptuer perform a bit faster too.
Cloning back and forth is rather safe, because you always have a hold option key bootable clone, either on the internal drive or the external drive, your computer will work from either.
What you don't want to use is Defrag software, that moves things around while the computer is running and messes things up quite a bit and really doesn't optimize as well or as safely as a clone.
In fact I just assisted a person who did just that and royally messed up their machine, requiring a complete rebuild of everything.
So read through this thread of mine and grasp things and you'll be cloning your boot drive in no time.
https://discussions.apple.com/message/16276201#16276201
Remember that cloning can't clone Filevaulted drives or Bootcamp partitions, also it only (at this time) clones the OS X partition, which for Snow Leopard is the whole drive usually (minus Bootcamp partition.)
However if your on Lion, Carbon Copy Cloner doesn't quite yet clone the hidden Lion Recovery Partition, so when you clone you won't have it on the external drive but the computer will boot off the external drive just fine without it.
So when you go to erase the Lion internal drive, you need to erase only the OS X Lion Partition not the entire drive before reverse cloning.
You should make a Lion Recovery USB if you have Lion, as only through Lion Recvoery can you reinstall Lion now. Instrucitons are in my thread.
The way you can tell if your selecting a partition or a entire drive in Disk Utility is how far left it is.
The far left are devices and the slightly indented items are partitions or media using that device.
Good Luck

My MacBook Pro can't turn on again and apple said that the hard drive was broken. What are the chances of apple recovering my files on target disk?

Okay basically my MacBook Pro won't turn on. It has a spinning loading sign and a bar that won't complete at the bottom. Rang apple said take it into the apple shop and they will try target disk. What is that exactly and what are the chances my photos and files can be recovered. I would go to the shop but I'm on vacation. Help would be appreciated thanks.

This defines Target Disk Mode:
http://support.apple.com/kb/PH10725
Though not guaranteed, the chances are good that the data can be recovered.
Ciao.

What are the steps for a clean reinstall of the os?

I have updated to mavericks from mountain lion and well to say the least, my 2011 macbook pro has been running slower than what it should be. I have been reading forums that other people are having problems as well and was able to fix some of them by doing uninstalling their os and reinstalling it for a clean install. So my question is what do i need to do before i reinstall the os, will my files be safe? Also what are the steps i need to take to reinstall the os?
Im honestly thinking about just going back mountain lion, this update adds nothing for me than it being free and the extra batery life, which i havent noticed, but when it takes forever to open up itunes or switch tabs in safari or open up word, theres a problem. Anyways can anybody help me out here?

A clean install means you'll have to re-install all third party apps from scratch and migrate nothing. Your files will not survive a clean install, so be sure you have a good backup to copy them back after.
Are you sure the issue is with the system and not just something in your user account? Have you tried logging into your Guest account and see how it works, or try starting in Safe Mode and see if the problem still occurs?
Restart holding the "shift" key.
(Expect it to take longer to start this way because it runs a directory check first.)

What are the settings for datasource and infopackage for flat file loading

hI
Im trying to load the data from flat file to DSO . can anyone tel me what are the settings for datasource and infopackage for flat file loading .
pls let me know
regards
kumar

Loading of transaction data in BI 7.0:step by step guide on how to load data from a flatfile into the BI 7 system
Uploading of Transaction data
Log on to your SAP
Transaction code RSA1LEAD YOU TO MODELLING
1. Creation of Info Objects
In left panel select info object
Create info area
Create info object catalog ( characteristics & Key figures ) by right clicking the created info area
Create new characteristics and key figures under respective catalogs according to the project requirement
Create required info objects and Activate.
2. Creation of Data Source
In the left panel select data sources
Create application component(AC)
Right click AC and create datasource
Specify data source name, source system, and data type ( Transaction data )
In general tab give short, medium, and long description.
In extraction tab specify file path, header rows to be ignored, data format(csv) and data separator( , )
In proposal tab load example data and verify it.
In field tab you can you can give the technical name of info objects in the template and you not have to map during the transformation the server will automatically map accordingly. If you are not mapping in this field tab you have to manually map during the transformation in Info providers.
Activate data source and read preview data under preview tab.
Create info package by right clicking data source and in schedule tab click star to load data to PSA.( make sure to close the flat file during loading )
3. Creation of data targets
In left panel select info provider
Select created info area and right click to create ODS( Data store object ) or Cube.
Specify name fro the ODS or cube and click create
From the template window select the required characteristics and key figures and drag and drop it into the DATA FIELD and KEY FIELDS
Click Activate.
Right click on ODS or Cube and select create transformation.
In source of transformation , select object type( data source) and specify its name and source system Note: Source system will be a temporary folder or package into which data is getting stored
Activate created transformation
Create Data transfer process (DTP) by right clicking the master data attributes
In extraction tab specify extraction mode ( full)
In update tab specify error handling ( request green)
Activate DTP and in execute tab click execute button to load data in data targets.
4. Monitor
Right Click data targets and select manage and in contents tab select contents to view the loaded data. There are two tables in ODS new table and active table to load data from new table to active table you have to activate after selecting the loaded data . Alternatively monitor icon can be used.
Loading of master data in BI 7.0:
For Uploading of master data in BI 7.0
Log on to your SAP
Transaction code RSA1LEAD YOU TO MODELLING
1. Creation of Info Objects
In left panel select info object
Create info area
Create info object catalog ( characteristics & Key figures ) by right clicking the created info area
Create new characteristics and key figures under respective catalogs according to the project requirement
Create required info objects and Activate.
2. Creation of Data Source
In the left panel select data sources
Create application component(AC)
Right click AC and create datasource
Specify data source name, source system, and data type ( master data attributes, text, hierarchies)
In general tab give short, medium, and long description.
In extraction tab specify file path, header rows to be ignored, data format(csv) and data separator( , )
In proposal tab load example data and verify it.
In field tab you can you can give the technical name of info objects in the template and you not have to map during the transformation the server will automatically map accordingly. If you are not mapping in this field tab you have to manually map during the transformation in Info providers.
Activate data source and read preview data under preview tab.
Create info package by right clicking data source and in schedule tab click star to load data to PSA.( make sure to close the flat file during loading )
3. Creation of data targets
In left panel select info provider
Select created info area and right click to select Insert Characteristics as info provider
Select required info object ( Ex : Employee ID)
Under that info object select attributes
Right click on attributes and select create transformation.
In source of transformation , select object type( data source) and specify its name and source system Note: Source system will be a temporary folder or package into which data is getting stored
Activate created transformation
Create Data transfer process (DTP) by right clicking the master data attributes
In extraction tab specify extraction mode ( full)
In update tab specify error handling ( request green)
Activate DTP and in execute tab click execute button to load data in data targets.

What are the *smw files? Will they reinstall the original applications of my Toshiba laptop?

Similar Messages

Maybe you are looking for