What are the steps necessary to create an EXE using LabVIEW DSC ?

I´m developing an application in LabVIEW 7.0 using the LabVIEW DSC 7.0 Toolkit. I´d like to know the steps I should take to cretae an EXE for this application.

There is information regarding building a LVDSC .exe at
http://zone.ni.com/devzone/conceptd.nsf/webmain/2f7cf918f3b412db86256a1c006af25f?OpenDocument
It's from the time of LV6, but contains some useful info.
=====================================================
Fading out. " ... J. Arthur Rank on gong."

Similar Messages

Installed new harddrive, what are the steps necessary to load operating sy

replaced hard drive in power book g 4 titatium(sp) What is next steps that needed to be taken so I can load OS X

Hi
Place the original disks that came with the laptop into the optical drive and hold down the 'C' key. The rest is fairly obvious from there. If you don't have the original installer disks but have a 'Universal' installer disk, use that instead. If you don't have any installer disks at all for some reason you're going to have to buy some.
All of this assumes your optical drive is at least a DVD-ROM and still working? If that's not the case there are other methods you could use to install the OS. The hardware you have means you can't install 10.6 (Snow Leopard) as 10.6 will only install on Intel Macs. If you have a set of gray coloured installer disks loaned to you by a friend or acquired in some other means which are not machine specific to your hardware you won't be able to use those either.
Tony

What are the steps necessary to allow a single user login the ability to execute a single stored procedure and nothing else.

Hello,
I have a request to create a user login and restrict that user to only be able to execute a single stored procedure.
Is this possible using only TSQL commands?
Am i on the right track here?
USE MyDatabase
GO
CREATE LOGIN [mylogin] DEFAULT_DATABASE = [MyDatabase], CHECK_POLICY = OFF, CHECK_EXPIRATION = OFF
GO
CREATE ROLE exec_single_proc_role
GO
exec sp_addrolemember 'exec_single_proc_role', 'mylogin'
GO
CREATE SCHEMA [restricted] AUTHORIZATION mylogin
GO
GRANT EXECUTE ON SCHEMA::restricted TO exec_single_proc_role
GO

Thanks for the reply.
This particular user should need to be able to Alter, Execute, and View the stored procedure as well.
Here is what i ended up with: Any improvement are appreciated. Thanks
USE MyDatabase
GO
--DROP SCHEMA
IF EXISTS (SELECT * FROM sys.schemas WHERE name = N'restricted')
DROP SCHEMA [restricted]
GO
--DROP SERVER WIDE LOGIN
IF EXISTS (SELECT * FROM sys.server_principals WHERE name = N'MyUserLogin')
DROP LOGIN [MyUserLogin]
GO
--CREATE SERVER WIDE LOGIN
CREATE LOGIN [MyUserLogin] WITH PASSWORD = 0x0100F1CF6792E602EF40DFF55983FDE81A9 HASHED, SID = 0xC33B04EECE59DC4C95BE66ED9B15D13D, DEFAULT_DATABASE = [MyDatabase], CHECK_POLICY = OFF, CHECK_EXPIRATION = OFF
GO
--DROP ROLE
DECLARE @RoleName sysname
set @RoleName = N'exec_single_proc_role'
IF EXISTS (SELECT * FROM sys.database_principals WHERE name = @RoleName AND type = 'R')
Begin
DECLARE @RoleMemberName sysname
DECLARE Member_Cursor CURSOR FOR
select [name]
from sys.database_principals
where principal_id in (
select member_principal_id
from sys.database_role_members
where role_principal_id in (
select principal_id
FROM sys.database_principals where [name] = @RoleName AND type = 'R' ))
OPEN Member_Cursor;
FETCH NEXT FROM Member_Cursor
into @RoleMemberName
WHILE @@FETCH_STATUS = 0
BEGIN
exec sp_droprolemember @rolename=@RoleName, @membername= @RoleMemberName
FETCH NEXT FROM Member_Cursor
into @RoleMemberName
END;
CLOSE Member_Cursor;
DEALLOCATE Member_Cursor;
End
IF EXISTS (SELECT * FROM sys.database_principals WHERE name = N'exec_single_proc_role' AND type = 'R')
DROP ROLE [exec_single_proc_role]
GO
--DROP USER
IF EXISTS (SELECT * FROM sys.database_principals WHERE name = N'MyUserLogin')
DROP USER [MyUserLogin]
GO
--CREATE USER AND ASSIGN DEFAULT SCHEMA
CREATE USER [MyUserLogin] FOR LOGIN [MyUserLogin] WITH DEFAULT_SCHEMA=[restricted]
GO
--CREATE SCHEMA
CREATE SCHEMA [restricted] AUTHORIZATION [MyUserLogin]
GO
--CREATE ROLE
CREATE ROLE [exec_single_proc_role] AUTHORIZATION [MyUserLogin]
GO
--ADD ROLE
EXEC sp_addrolemember 'exec_single_proc_role', [MyUserLogin]
GO
GRANT EXECUTE ON SCHEMA::[restricted] TO [exec_single_proc_role]
GO
GRANT EXECUTE ON OBJECT::[dbo].[MyStoredProcedure] TO [MyUserLogin]
GO

What are the steps required to create multi-steps campaigns?

I've a workflow that does not work. I'm trying to send email using the multi-steps campaign, but after creating the workflow nothing seems to happen, Any thoughts on that?

Hi,
which version of JDeveloper is this ? 11 ?
Frank

What are the steps necessary to get EPICS server to publish when deploying on RT cRIO

I have been using LV for many years and just began using a cRIO 9074 RT. I am able to build and run/deploy simple VIs on the cRIO, but cannot get the EPICS server to publish the PVs to the network. I have spent many hours researching examples and white papers, but can not find a good example of deploying an EPICS server on the cRIO. ( I have successfully used EPICS on computer based systems)
Does any one have a step by step example relating to EPICS deployment on a cRIO (Real Time)?
Solved!
Go to Solution.

Turns out the PVs were being published. Just have to know how to look for them.

What are the steps in creating a customised report?

Dear Experts,
can you help me with your expereince what are the steps involved in creating a customised report?
Who generates the requirement?
Who prepares the functional spec and what information it contains?
Who approves the functional spec once it is prepared?
You can take the followig case as an example:
The customer requirement is that a report can be run for everything that is received in a given area and compare the price at which the material was received to the standard or moving average price in SAP.
Here, what information you will give to ABAP ers to devlop the report?
I would appreciate if anyone can help me with the entire process.
Full points to be awarded for a satisfactory reply.
Regards,
Ranjan

hi
>Who generates the requirement?
client or end user
>Who prepares the functional spec and what information it contains
there should be a specific format and it is to be filled by the functional consultant
http://www.sap-img.com/general/what-are-functional-specification-in-sap.htm
http://erp.ittoolbox.com/groups/project-management/erp-projectmanagement/samples-for-sap-functional-specification-1194336
>Who approves the functional spec once it is prepared?
abaper or the TL
http://sap.niraj.tripod.com/id67.html
get the proper info from ur customer as what means all information
get the proper fields he required
regards
KI

What are the steps involed in Mvt types

Dear friends I have 3 Questions
1. How to create movement types? What are the steps involved? Can someone explain in details?
2. What is the difference between the stock transfer between 2 plants of same company code, and stock transfer between 2 plants belonging to the different company codes.
3. What are the steps involved in creating pricing procedure?
Thanks in advance
regards
Radha

Hi
1. Please check this
http://www.sap-basis-abap.com/sapmm015.htm
2. please check this
http://help.sap.com/saphelp_47x200/helpdata/en/4d/2b90dc43ad11d189410000e829fbbd/content.htm
3. Please check this
http://sap-img.com/materials/steps-for-mm-pricing-procedures.htm
Hope it helps
regards
Srinivas

What are the steps to create sap apo ..plz send step by steps plzzzzzzzzzzz

what are the steps to create sap apo ..plz send step by steps plz. Iam new for these ?

what are the steps to create sap apo ..plz send step by steps plz. Iam new for these ?

What are the steps to create DB connect?

What are the steps to create DB connect?

Hi,
Check the following link for DB Connect details:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/2f0fea94-0501-0010-829c-d6b5c2ae5e40
Also please search in the forum, you will find lot of threads on this topic.
regards,
Pruthvi R

What are the steps to create classes?

What are the steps to create classes?

Hello.
Here's one example applied to a BSP page.
How to create your first OO Abap Class for a BSP
Kind regards.
Bruno

What are the steps needs to be perform to define a data model

What are the steps needs to be perform to define a data model
a. Information Gathering
b. Hardware & Software
c. Structure the Information MDM
d. Transfer into a Physical Model BW data model
e. Explore use of existing model Business Content

Hi Siva,
 Very first activity is Proof of concept (POC), here we have to show How BW works for clients Reporting requirement during POC we as BW consultants need to creat some sample BW back end objects and also some reports based on business requirement. This is very crucial stage as Client Judge wethere BW would meet his demands. If every thing is fine then next step is Bidding.
After Bidding the contract then actual Project intiates. from here we follow ASAP methodology.

Project Preparation
Here Senior Consultant would go to Client place for Business Process Transistion and to know in what way the Architectue should be set up so here Basis People will come into picture.
Blue Print
Transistion could be understood by BRD (Business Requirement Documents) BRD states what is exact requirement and it is given by End users.
 By seeeing thr BRD's we as BW consultants must prepare APPlication Design Documents . The Application Design Documents states all the Technical aspects that needs to be performed as BW backend and also as well as Frontend.
Realization Phase
Here as BW consultants we must start confuguring as mentioned in ADD's by taking care of all performance aspects, once all the configuration are done we do Unit testing. unit testing is an activity where we check all the design process wether it running correct or not. After unit testing we move the design objects to Qulaity for Integration Testing.
Testing
 Here end user will check all the objects, reports on end to end basis. after integration testing is done then UAT ( User acceptance Testing) would come into picture where user check each process and sign off.
Go live
Here all the object will be moved to Production where end users and power users can start working on the system. intially for some days Development team would be taking care of all support activites there after it will be transitoned to support team.
Hope It helps you.
Assign Points if it usefull
Regards
Sujan

What are the steps to migrate j2ee project from version 1.4 to 1.6

Hi All,
What are the steps to migrate java project from version1.4 to 1.6 and weblogic 9 to 12c.
Currently my application(java version1.4) is running on weblogic 9, i want to migrate it to weblogic 12c, what are the major steps i have to follow.
Please anyone of you help me as soon as possible.
Thanks,
Yugandhar.G

Hi Jeet,
The following are the logs for exception.
<Dec 13, 2012 12:04:52 PM CST> <Warning> <Socket> <BEA-000449> <Closing the socket, as no data read from it on 0:0:0:0:0:0:0:1:52,370 during the configured idle timeout of 5 seconds.>
<Dec 13, 2012 12:07:14 PM CST> <Warning> <Deployer> <BEA-149251> <Operation Remove failed for application "tcs". Error: java.lang.NullPointerException
java.lang.NullPointerException
 at weblogic.servlet.internal.WebAppModule.remove(WebAppModule.java:851)
 at weblogic.application.internal.flow.ModuleStateDriver$4.previous(ModuleStateDriver.java:236)
 at weblogic.application.internal.flow.ModuleStateDriver$4.previous(ModuleStateDriver.java:223)
 at weblogic.application.utils.StateMachineDriver.previousState(StateMachineDriver.java:148)
 at weblogic.application.utils.StateMachineDriver.previousState(StateMachineDriver.java:138)
 Truncated. see log file for complete stacktrace
Caused By: java.lang.NullPointerException
 at weblogic.servlet.internal.WebAppModule.remove(WebAppModule.java:851)
 at weblogic.application.internal.flow.ModuleStateDriver$4.previous(ModuleStateDriver.java:236)
 at weblogic.application.internal.flow.ModuleStateDriver$4.previous(ModuleStateDriver.java:223)
 at weblogic.application.utils.StateMachineDriver.previousState(StateMachineDriver.java:148)
 at weblogic.application.utils.StateMachineDriver.previousState(StateMachineDriver.java:138)
 Truncated. see log file for complete stacktrace
>
<Dec 13, 2012 12:07:14 PM CST> <Error> <Deployer> <BEA-149265> <Failure occurred in the execution of deployment request with ID "1355371555961" for task "1". Error is: "java.lang.ArrayIndexOutOfBoundsException: 8"
java.lang.ArrayIndexOutOfBoundsException: 8
 at com.bea.objectweb.asm.ClassReader.readUnsignedShort(Unknown Source)
 at com.bea.objectweb.asm.ClassReader.<init>(Unknown Source)
 at com.bea.objectweb.asm.ClassReader.<init>(Unknown Source)
 at weblogic.application.utils.annotation.ClassInfoImpl.<init>(ClassInfoImpl.java:44)
 at weblogic.application.utils.annotation.ClassfinderClassInfos.polulateOneClassInfo(ClassfinderClassInfos.java:145)
 Truncated. see log file for complete stacktrace
Caused By: java.lang.ArrayIndexOutOfBoundsException: 8
 at com.bea.objectweb.asm.ClassReader.readUnsignedShort(Unknown Source)
 at com.bea.objectweb.asm.ClassReader.<init>(Unknown Source)
 at com.bea.objectweb.asm.ClassReader.<init>(Unknown Source)
 at weblogic.application.utils.annotation.ClassInfoImpl.<init>(ClassInfoImpl.java:44)
 at weblogic.application.utils.annotation.ClassfinderClassInfos.polulateOneClassInfo(ClassfinderClassInfos.java:145)
 Truncated. see log file for complete stacktrace
>
<Dec 13, 2012 12:07:14 PM CST> <Warning> <Deployer> <BEA-149004> <Failures were detected while initiating deploy task for application "tcs".>
<Dec 13, 2012 12:07:14 PM CST> <Warning> <Deployer> <BEA-149078> <Stack trace for message 149004
java.lang.ArrayIndexOutOfBoundsException: 8
 at com.bea.objectweb.asm.ClassReader.readUnsignedShort(Unknown Source)
 at com.bea.objectweb.asm.ClassReader.<init>(Unknown Source)
 at com.bea.objectweb.asm.ClassReader.<init>(Unknown Source)
 at weblogic.application.utils.annotation.ClassInfoImpl.<init>(ClassInfoImpl.java:44)
 at weblogic.application.utils.annotation.ClassfinderClassInfos.polulateOneClassInfo(ClassfinderClassInfos.java:145)
 Truncated. see log file for complete stacktrace
Caused By: java.lang.ArrayIndexOutOfBoundsException: 8
 at com.bea.objectweb.asm.ClassReader.readUnsignedShort(Unknown Source)
 at com.bea.objectweb.asm.ClassReader.<init>(Unknown Source)
 at com.bea.objectweb.asm.ClassReader.<init>(Unknown Source)
 at weblogic.application.utils.annotation.ClassInfoImpl.<init>(ClassInfoImpl.java:44)
 at weblogic.application.utils.annotation.ClassfinderClassInfos.polulateOneClassInfo(ClassfinderClassInfos.java:145)
 Truncated. see log file for complete stacktrace
>
<Dec 13, 2012 12:07:17 PM CST> <Error> <Console> <BEA-240003> <Administration Console encountered the following error: weblogic.application.WrappedDeploymentException: 8
 at com.bea.objectweb.asm.ClassReader.readUnsignedShort(Unknown Source)
 at com.bea.objectweb.asm.ClassReader.<init>(Unknown Source)
 at com.bea.objectweb.asm.ClassReader.<init>(Unknown Source)
 at weblogic.application.utils.annotation.ClassInfoImpl.<init>(ClassInfoImpl.java:44)
 at weblogic.application.utils.annotation.ClassfinderClassInfos.polulateOneClassInfo(ClassfinderClassInfos.java:145)
 at weblogic.application.utils.annotation.ClassfinderClassInfos.populateClassInfos(ClassfinderClassInfos.java:137)
 at weblogic.application.utils.annotation.ClassfinderClassInfos.<init>(ClassfinderClassInfos.java:28)
 at weblogic.application.utils.annotation.AnnotationMappingsImpl.loadAnnotatedClasses(AnnotationMappingsImpl.java:69)
 at weblogic.application.internal.ApplicationContextImpl.processAnnotationMappings(ApplicationContextImpl.java:985)
 at weblogic.application.internal.ApplicationContextImpl.getAnnotatedClasses(ApplicationContextImpl.java:1010)
 at weblogic.j2ee.managedbean.ManagedBeanModuleExtensionFactory.create(ManagedBeanModuleExtensionFactory.java:43)
 at weblogic.servlet.internal.WebAppModule.initModuleExtensions(WebAppModule.java:562)
 at weblogic.servlet.internal.WebAppModule.init(WebAppModule.java:271)
 at weblogic.servlet.internal.WebAppModule.init(WebAppModule.java:636)
 at weblogic.application.internal.flow.ScopedModuleDriver.init(ScopedModuleDriver.java:162)
 at weblogic.application.internal.ExtensibleModuleWrapper.init(ExtensibleModuleWrapper.java:74)
 at weblogic.application.internal.flow.ModuleListenerInvoker.init(ModuleListenerInvoker.java:84)
 at weblogic.application.internal.flow.InitModulesFlow.initModule(InitModulesFlow.java:312)
 at weblogic.application.internal.flow.InitModulesFlow.initModules(InitModulesFlow.java:325)
 at weblogic.application.internal.flow.InitModulesFlow.prepare(InitModulesFlow.java:378)
 at weblogic.application.internal.BaseDeployment$1.next(BaseDeployment.java:706)
 at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:35)
 at weblogic.application.internal.BaseDeployment.prepare(BaseDeployment.java:237)
 at weblogic.application.internal.EarDeployment.prepare(EarDeployment.java:61)
 at weblogic.application.internal.DeploymentStateChecker.prepare(DeploymentStateChecker.java:158)
 at weblogic.deploy.internal.targetserver.AppContainerInvoker.prepare(AppContainerInvoker.java:60)
 at weblogic.deploy.internal.targetserver.operations.ActivateOperation.createAndPrepareContainer(ActivateOperation.java:207)
 at weblogic.deploy.internal.targetserver.operations.ActivateOperation.doPrepare(ActivateOperation.java:96)
 at weblogic.deploy.internal.targetserver.operations.AbstractOperation.prepare(AbstractOperation.java:229)
 at weblogic.deploy.internal.targetserver.DeploymentManager.handleDeploymentPrepare(DeploymentManager.java:747)
 at weblogic.deploy.internal.targetserver.DeploymentManager.prepareDeploymentList(DeploymentManager.java:1216)
 at weblogic.deploy.internal.targetserver.DeploymentManager.handlePrepare(DeploymentManager.java:250)
 at weblogic.deploy.internal.targetserver.DeploymentServiceDispatcher.prepare(DeploymentServiceDispatcher.java:159)
 at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.doPrepareCallback(DeploymentReceiverCallbackDeliverer.java:171)
 at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.access$000(DeploymentReceiverCallbackDeliverer.java:13)
 at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer$1.run(DeploymentReceiverCallbackDeliverer.java:46)
 at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:545)
 at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
 at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
>

What are the steps for using the backup files to reload data to my blackberry curve (8310, i think)?

What are the steps for using the backup files to reload data to my blackberry curve (8310, i think)?

Connect BB to PC. On 'Desktop Manager'>Backup & Restore tab>Click Restore. Double click .ipd file (backup file created from Desktop Manager).

What are the steps to view the output for check printing

what are the steps ,the method to view the output for check printing

Hi,
You can ask your functional person to make a payment to a vendor which will then issue a check. You can use the same payment run in program RFFOUS_C and create new checks by voiding the previous check number with a void reason code.
You can do this as many times as you want and test your check output.
Regards
Shounak

What are the steps to configure Fund Management in Plant Maintenance

Hi Friends,
while creating Plant Maintenance order through T code iw31.
In the main menu Go to-Assisments----Fund management.
now this Fund management is in grey mode.
What are the steps i need to carry to make it active mode.
Please suggest
Thanks in advance

Dear
Ask with your Co person either they activated fund mgt. This is thier Job u can activate your order types for commitmente check at KOAB.
Ask them to look at SPRO--PUBLIC SECTOR MGT
Also at SPRO-CONTROLLING-INTERNAL ORDERS-BUDGET AND AVAILABLITY CONTROL
You also check at your OIOA.
thenna

What are the steps necessary to create an EXE using LabVIEW DSC ?

Similar Messages

Maybe you are looking for