What can I expect with 4.1

I want to build a fast computer - i7 with 12 gig of ram... fast drives...etc.
I will shoot HMC150 AVCHD and transcode to NeoScene.
I'm wondering about rendering...
Will I be able to add a few filters such as Color Balance, Picture in Picture, Title without having to render? I realize I can't really stact the filters/layers up like crazy, but will I be able to add a few basic filters without rendering.
I will be monitoring from a MXO2 mini.
I currently have a RTX-100 and don't have to render much.
Thanks,
Mickey

Nice article Harm.
To only dream of a machine with all that power.
So far on my soon to be build I have:
Case:
COOLER MASTER HAF 932
Motherboard:
ASUS P6T Deluxe V2 LGA 1366
CPU:
Intel Core i7 920 Nehalem 2.66GHz
CPU Cooler:
Noctua NH-U12P SE1366 120mm SSO CPU Cooler
Operating System:
Microsoft Windows 7 64-bit
RAM:
CORSAIR XMS3 12GB (6 x 2GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800)
Graphics Card:
SAPPHIRE Toxic 100269TXSR Radeon HD 4890 1GB 256-bit GDDR5 PCI Express 2.0 x16
Power Supply:
CORSAIR CMPSU-1000HX 1000W ATX12V 2.2 / EPS12V 2.91 SLI Ready CrossFire Ready 80 PLUS Certified Modular Active PFC Compatible with Core i7 Power Supply
Boot Drive:
Western Digital VelociRaptor WD3000HLFS 300GB 10000 RPM 16MB Cache SATA 3.0Gb/s 3.5" Internal Hard Drive
Hard Drives: ( 2-4 min )
Western Digital Caviar Black WD1001FALS 1TB 7200 RPM 32MB Cache SATA 3.0Gb/s 3.5" Internal Hard Drives
Blu-ray Burner:
Pioneer Black 8X BD-R 2X BD-RE 16X DVD+R 5X DVD-RAM 8X BD-ROM 4MB Cache SATA Internal Blu-ray Burner 8X Blu-Ray DVD Burner
Im still waiting till Windows 7 comes out.
Any changes you see I might have to make ?
Thanks:  Glenn

Similar Messages

  • What can I expect of my 4s with wifi  connectivity. My 4s receive a signal from the same router I have always used. My 3G would pick up a signal throughout the house, and my 4s won't allow me out of the room. Is my new phone defective or just inferior.

    What can I expect of my 4s with wifi  connectivity. My 4s receive a signal from the same router I have always used. My 3G would pick up a signal throughout the house, and my 4s won't allow me out of the room. Is my new phone defective or just inferior.

    4S at my house have stronger antenna than 3G iPhone. Reset Network Settings, tap Settings App>General>Reset, near bottom>Reset Network Settings. If still problem take to Apple for Warranty Coverage.

  • "app.selection[0]" – what can be done with it? (CS5)/(CS6)(JS)

    This is hopefully not a simple question – because then the answer would probably be 'no'/'nothing else'.
    What can be done with a selection? Is it posible to sort out the different contents within a selection, declare variables around them or give them names, and then continue from there?
    I have one specific idea here. I want to select two things – one is a group, and the other is a non-grouped object, and then include that object in the original group. No – not the same as selecting them and simply grouping them, that could be done by hand. I want to include an object in a previously set group without creating another one.
    It has to do with a plugin used for creating apps for mobile devices. Creating another group out of the group + item makes all previous settings assigned to the original group dissapear. Not sure if the plugin will accept this method, but it's worth a try.

    Hm. This now is pure speculation on my side, 'cause you are not telling much about the plugIn that has to do with app creation.
    From my knowledge of Adobe Digital Publishing Suite, and I cannot assume that you are using the DPS plugIns "Folio Builder" and "Overlay Creator", I can only guess, that you applied something like an effect (in terms of DPS an "overlay" function) to a group and afterwards grouping anew with a different object to a new group. Then the overlay is burried in that group and will not work as you expected.
    I never asked myself if it will damage an applied "overlay", if the object is grouped with something that has an different "overlay" effect or no "overlay" effect at all. But I will test for that situation…
    After re-reading your question you like to add the same "overlay" effect of the original group to the new group or adding a new object to the group so the effect is not lost.
    In case you are working with DPS, the overlay effects are "injected" with a method you can compare directly with the JavaScript method  insertLabel("KeyString","ValueString") and will stick to the object until the values are changed or the object (your group) will not exist any more (by un-grouping).
    So please, tell us something more about your workflow…
    It's not that easy to add an existing object to a group without un-grouping and re-grouping. And this will destroy the "injected" Key/Value-pairs of the effect.
    Here is something to think about (read the whole discussion):
    http://forums.adobe.com/message/2259499#2259499
    Uwe

  • Replace a MOBO-What Can I expect?

    Hello-
    I have a 2.5 yr old GNB-MAX and the IDE controller seems to have gone bad; my DVD and CD drives don't spin up correctly; this happened before and I swapped MOBO and the problem was fixed, with the faulty MOBO being repaired by MSI.  Fortunately, I have a spare MOBO of the same model, which greatly helps (smartest thing I ever did was purchase a backup on EBAY for $40).
    Since I don't do this often, I can't remember exactly how the system will respond with the new MOBO.  When I swap my MOBO, what can I expect?  I presume I will not need to reinstall WIN-XP, but I will have to reactivate it, right?   What other nuances will I encounter?
    Thanks.
    Scott

    I think no .. unless the mobo "touch wood" had problems... maily ... all not much difference .. unless is the BIOS different ver .. etc .... should be no problem =)

  • After the last update is no longer contact to the internet or to whatsapp? What can I do with my iphone 5?

    After the last update is no longer contact to the internet or to whatsapp? What can I do with my iphone 5?

    No internet access when connected to an available wi-fi network and the same when connected to your carrier's cellular network, or when connected to your carrier's cellular network only?
    Any error message provided?

  • I/O timeout all the time on console - what can I do with my hard drive? Macbook pro late 2011

    My macbook has been extremely slow for a while and after looking on this site I discovered I should look at the console - and noticed I had I/O timeouts all the time which I gather are a problem.
    What can I do with my hard drive? If I back it up using time machine and erase the disk with zeros will the problem continue if I simply restore from time machine?
    Or should I invest in a new hard drive - but if I buy a new hard drive is there something on my computer that will wreck that one as well? i use final cut pro/studio a lot and it's got to the stage where I can barely use it - do I need a 7200rpm hard drive? My current one is a 500gb 5400rpm.
    I have 16gb of RAM in but since upgrading this from 4GB it made a difference to the speed for all of two seconds then the computer returned to its normal slow speed.
    Would appreciate any help on this issue as I'm not particularly technical.

    I wouldn't worry too much about what the Console logs are showing... although I/O timeouts, if related to reading/writing to your disk may be a problem. I would have to see the whole Console message to know for certain...
    Your hard drive is sure to be slowing you down with FCP. Your best bet would be to upgrade to an SSD, if you can afford it. It's the only way you're going to see a real speed increase in FCP as so many large temp/cache files are written to the drive.
    If you can't afford a SSD, you may want to look at a 7200rpm SATA III drive (if your MBP supports SATA III - which model do you have? 2011 or later, I'm assuming, since you note that you've 16GB of RAM?).
    You should also update your OS to 10.7.5 if your profile reading of 10.7.2 is correct. Won't help speed, but will be more reliable -> http://support.apple.com/kb/DL1582.
    Clinton

  • I recently upgrade to an iPAD Air. I gave my old iPAD (1st gen) to my wife.  I restored it to original factory conditions.  Now we cannot install iBook on it since it requires iOS 7.  What can we do with older iPADS that are still 100% functional.

    I recently upgrade to an iPAD Air. I gave my old iPAD (1st gen) to my wife.  I restored it to original factory conditions.  Now we cannot install iBook on it since it requires iOS 7.  What can we do with older iPADS that are still 100% functional except for the fact that you cannot updrade the iOS above version 5?

    Look at this similar problem in getting Netflix on an iPad 1. Same technique should work for you.
    https://discussions.apple.com/thread/5753106?tstart=30
     Cheers, Tom

  • What can be wrong with my iPhone 4?  There is no sound from incoming calls, SMS and even when I play music.  I already checked that it's not muted, volume is high and not set to "vibrate mode."

    What can be wrong with my iPhone 4s.  There is no sound from incoming calls and SMS even when I try to play music.
    I already checked that it is not muted, volume is high and not in " vibrate mode."

    What can be wrong with my iPhone 4s.  There is no sound from incoming calls and SMS even when I try to play music.
    I already checked that it is not muted, volume is high and not in " vibrate mode."

  • HT204406 what can I do with an error code -50 network reset message?

    what can I do with an error code -50 network reset message?

    Hi ddelacruz,
    Thanks for using Apple Support Communities.  This article has some information on error (-50):
    iTunes Store: "Error (-50)" when downloading purchased content
    http://support.apple.com/kb/ts1583
    Cheers,
    - Ari

  • Curve drenched and doesn't work - what can i do with it now?

    i went swimming with my curve in my pocket, and needless to say, it's now dead.  what can i do with it? send it somewhere for refurb? and no i didn't have insurance, so please don't rub it in!
    Solved!
    Go to Solution.

    11 times out of 10, water damaged is not covered under warranty.
    I'm very sorry for your loss.
    Hope you manage to get the moisture out, you can pull teh device apart and shave off the rust and corrosion you see buy purchasing a mobile repair kit, however rust spreads in a matter of months..
    If your issue is resolved, put a checkmark in the green box that contains the resolution.
    OR
    If it was just/or also really helpful - Give it a Kudos.. Go on Mate.. Help the rest of the clueless blackberry user world find their answer too..
    ~Gday from Down Under~

  • My iphone 5 suddenly has a white blank screen,  no liquid contact or history of fall, what can i do with this problem?

    my iphone 5 suddenly has a white blank screen,  no liquid contact or history of fall, what can i do with this problem?

    Hey there Galileo,
    It sounds like your iPhone screen is solid white and you cannot do anything with it. Take a look at these steps from the following article about that kind of issue:
    Get help with the screen on your iPhone, iPad, or iPod touch
    If you see a solid color screen (black, white or blue)
    Plug in your device to a power source. If you see the low-battery screen when you plug in, let your device charge for at least 10 minutes (20 minutes for iPad) before using it.
    Reset your device while it's plugged in.
    If resetting doesn’t fix the issue, restore your device.
    If you still see the issue after you restore, contact Apple Support.
    Thank you for using Apple Support Communities.
    Regards,
    Sterling

  • Please help me!!!!!!! what can I do with the message " no service " I have already updated for 5.0.1 (9A406) and nothing happened. Please Help me!!!!! I´m thinking to came back to my nokia. It´s work at least!!!!

    Please help me!!!!!!! what can I do with the message " no service " I have already updated for 5.0.1 (9A406) and nothing happened. Please Help me!!!!! I´m thinking to came back to my nokia. It´s work at least!!!!

    Please DO go back to your Nokia.  I'm sure people on their support forums will love your whining and idle threats just as much as we do.

  • What can I do with Creative Cloud and Photoshop ELEMENTS besides backup my photos?

    What can I do with Creative Cloud and Photoshop ELEMENTS besides backup my photos?

    Umm, seriously? No offense, but what you are saying is basically "I just bought a Mercedes, but don't know how to drive." You can plenty of info what each program in Creative Cloud does by just typing the respective words into a web search...
    Mylenium

  • I have Sony camera DSC-HX400V which does not have raw program. Pls explain what can I do with jpeg only

    I have Sony camera DSC-HX400V which does not have raw program. Pls explain what can I do with lightroom 5 with jpeg only
    Arieh Gertler
    [email protected]

    You can do just about anything with a JPEG image that you can with a raw image. The advantage of working with raw is that it is possible to work with more extremes in exposure. More highlights and shadows can be recovered in a raw image, but there is a lot that can be done with JPEG images as well. All of the library functions and keywording and all the other features of Lightroom can be used on JPEG images just as easily as they can be used on raw images.
    Having said all that, you might be more comfortable using Photoshop Elements. Both programs have trial versions that you can use for 30 days to decide which one or whether both will work for you. It would probably be to your advantage to try them out and decide for yourself.

  • See what can be done with Java

    Want to see what can be done with a Java and specifically a Java3D application. Go to the Java3D forum and download the application "Free Java3D Demo Application".
    This should put to rest the questions if Java is good enough to do serious programming. This is a Demo of a full application that has over 100,000 circulation within the last month.

    I appreciate the response to this posting however please do not email questions to me reguarding how it works or can I help you to do your java homework. <8-)
    I received 60 email since this posting with many questions. The software is a commercial application. If you are interested, I suggest you go to www.3demall.com/fast and join the program in order to receive a CD and support. The Fast Start Program is a way to introduce our complete concept of PayWare while providing a good value.

Maybe you are looking for

  • I use iMac desktop. I can't save web pages as PDF file by using Firefox, but by Safari is fine.

    I'm using Mac OS X 10.6.4. Today, I tried to save my email content as a PDF file. However, I only got a PDF file that have partial content of email. Then I adjust the printer setting and did it again, then I only got a blank PDF file. There was nothi

  • Help needed with Boot times and performanc​e.

    Hi everyone, after two weeks of getting nowhere i gave up and here i am. I have an S10-3 which i am struggling with. As the post title indicates perfomance is (how can i put it) slow. We are talking 15/20 minutes to boot and when i finaly get to Wind

  • Mc book pro for maya

    hi everybody, I´m going to buy a mac since i´m tired of windows (actually i have workstation dell precision with 2 xeon 3.0 and 3Gb ram) wich i use mostly for 3d with maya and some compositing. I thought to buy a mac book pro with 2.66 core duo and 2

  • Quicktime 10.3 doesn't play

    I just bought a Mc Book Air. But when I try to play any video mov or avi it doesn't play. I need any additional program or update? File information: codecs MP42, MPEG Layer 3.

  • Question on JSF/JSP mixing issue

    Hello all. We have an JSP application which we are trying to move to JSP. After some thought we decided that these will need to coexist in some parts of the code. Now I have run into an issue as result of these and I am wondering if anyone can help.