What classes or methods to use?

Hello everyone. I´m connecting flash cs4 to a microcontroller through serialproxy and have a AS3library for this purpose and everything is working great ando so on.. i can get and write everything i need from and to the board so all that is working great. Beatymuss!! But there´s somthing i can´t find a way to get to work. I have a analog device, wich is a reed switch, used to measure speed. I know that if this swich will close a circuit very second it will be spinning at a certain speed ( say: 1 mile per hour... ok?). so every time it closes a value will be sent to a dynamic text field that is displaying the readings of this pin on the board ( 0 for OFF and 1 for ON). Good so far. But the thing is, i can´t find a class or methods to count the 1 (ones) coming in so i can apply the math and get a speed value displayed on a dynamic text field (allways updated). Can anyone please HELP? i´ve been the help files and found nothing that works, i´m sure its because i´m new to action script and i just dn´t know my way around so good.
I don´t know if i explained this verry well but feel free to ask for any additional info on this.
Thanks in advance,
Chris Correia.

Hello Ned, and thank you so much for your interest and quick respons.
I´d like to try to explain a lttle beeter what i´m trying to achieve here. Basicly what i wnt is to count how many times per second that pin on the board ( the one sending the switch data - 0 for OFF and 1 for ON) sends an ON message, in this case, to a dynamic text field listening to that pin´s sent data.So i can then complete the function with an equation that will output the speed at wich it is happening.
I´m sorry if i got you even more confused.
(This may be even more confusing....)
If you don´t mind i´d like to know if clear a few points for me about the getTimer() function. as you said in your post i could use the "getTimer() function to keep track of the total time from when the closings start" but can i get the timer to output how manny "closes" happened every second ?
Allso about the "closing to closing time or the averaging of them" issue you mentioned, ita the closing to closing time i´m looking for. Because if i was looking for an average of these i´d have collect readings for a period of time to have values to average out. That´s wy i say i need the closing to closing time.
To try and make this alittle clearer the reed switch i mentioned is a magnetic spinning switch that closes a contact every time the magnet moves past a switch as it spins. And by knowing that if the contact is closed once per second its spinning at a certain speed, if i find out how manny times its closing per secon every second i´ll determin how fast its spinnig every second that goes by.(?)
So iguess all need from AS3 is for it to count how many times this event happens per second because the rest is a simple math operation ( a rule of three should work fine) to determin speed of rotation then render the result in a dynamic text field ( that will update every second showing variatons in speed).
I hope you can really help me out on this one.
Thank you verry much for your atention,
Chris Correia

Similar Messages

What class sd card to use in lumia 2520?

What class sd card should be used in the lumia 2520 tablet?

jones65,
Jimmyireland is correct. Card rated Class 2, 4, 6, and 10 even the much more faster cards should work just fine with the 2520 as long as it is made by a reputable brand.

What class / API should i used ?

Hi, all
what api should i used when i want to know present time (hour-minute-second) or date... i've used :
GregorianCalendar kal = new GregorianCalendar();
int year=kal.YEAR;
instead i got year is 1 ??? (for present year !!) ...
it does the same as hour and minute... i dont have the exact time like the time in my win task bar.. plzzz help me...

This should help:
* Calendar Demo (by Sun, with modifications)
import java.util.*;
public class CalendarDemo {
    public static void main(String[] args) {
// get the supported ids for GMT-08:00 (Pacific Standard Time)
        String[] ids = TimeZone.getAvailableIDs(-8 * 60 * 60 * 1000);
        // if no ids were returned, something is wrong. get out.
        if (ids.length == 0) {
            System.exit(0);
// create a Pacific Standard Time time zone
        SimpleTimeZone pdt = new SimpleTimeZone(-8 * 60 * 60 * 1000, ids[0]);
// set up rules for daylight savings time
        pdt.setStartRule(Calendar.APRIL, 1, Calendar.SUNDAY, 2 * 60 * 60 * 1000);
        pdt.setEndRule(Calendar.OCTOBER, -1, Calendar.SUNDAY, 2 * 60 * 60 * 1000);
// create a GregorianCalendar with the Pacific Daylight time zone
// and the current date and time
        Calendar calendar = new GregorianCalendar(pdt);
        Date trialTime = new Date();
        calendar.setTime(trialTime);
// Change month numbering to 1-12
        int monthNumber = calendar.get(Calendar.MONTH)+1;
// begin output
        System.out.println("Current Time");
// print out a bunch of interesting things
        System.out.println("ERA: " + calendar.get(Calendar.ERA));
        System.out.println("YEAR: " + calendar.get(Calendar.YEAR));
        System.out.println("MONTH: " + monthNumber);
        System.out.println("WEEK_OF_YEAR: " + calendar.get(Calendar.WEEK_OF_YEAR));
        System.out.println("WEEK_OF_MONTH: " + calendar.get(Calendar.WEEK_OF_MONTH));
        System.out.println("DATE: " + calendar.get(Calendar.DATE));
        System.out.println("DAY_OF_MONTH: " + calendar.get(Calendar.DAY_OF_MONTH));
        System.out.println("DAY_OF_YEAR: " + calendar.get(Calendar.DAY_OF_YEAR));
        System.out.println("DAY_OF_WEEK: " + calendar.get(Calendar.DAY_OF_WEEK));
        System.out.println("DAY_OF_WEEK_IN_MONTH: " +
            calendar.get(Calendar.DAY_OF_WEEK_IN_MONTH));
        System.out.println("AM_PM: " + calendar.get(Calendar.AM_PM));
        System.out.println("HOUR: " + calendar.get(Calendar.HOUR));
        System.out.println("HOUR_OF_DAY: " + calendar.get(Calendar.HOUR_OF_DAY));
        System.out.println("MINUTE: " + calendar.get(Calendar.MINUTE));
        System.out.println("SECOND: " + calendar.get(Calendar.SECOND));
        System.out.println("MILLISECOND: " + calendar.get(Calendar.MILLISECOND));
        System.out.println("ZONE_OFFSET: " +
            (calendar.get(Calendar.ZONE_OFFSET) / (60 * 60 * 1000)));
        System.out.println("DST_OFFSET: " +
            (calendar.get(Calendar.DST_OFFSET) / (60 * 60 * 1000)));
        System.out.println("Current Time, with hour reset to 3");
        calendar.clear(Calendar.HOUR_OF_DAY);
        // so doesn't override
        calendar.set(Calendar.HOUR, 3);
        System.out.println("ERA: " + calendar.get(Calendar.ERA));
        System.out.println("YEAR: " + calendar.get(Calendar.YEAR));
        System.out.println("MONTH: " + calendar.get(Calendar.MONTH));
        System.out.println("WEEK_OF_YEAR: " + calendar.get(Calendar.WEEK_OF_YEAR));
        System.out.println("WEEK_OF_MONTH: " + calendar.get(Calendar.WEEK_OF_MONTH));
        System.out.println("DATE: " + calendar.get(Calendar.DATE));
        System.out.println("DAY_OF_MONTH: " + calendar.get(Calendar.DAY_OF_MONTH));
        System.out.println("DAY_OF_YEAR: " + calendar.get(Calendar.DAY_OF_YEAR));
        System.out.println("DAY_OF_WEEK: " + calendar.get(Calendar.DAY_OF_WEEK));
        System.out.println("DAY_OF_WEEK_IN_MONTH: " +
            calendar.get(Calendar.DAY_OF_WEEK_IN_MONTH));
        System.out.println("AM_PM: " + calendar.get(Calendar.AM_PM));
        System.out.println("HOUR: " + calendar.get(Calendar.HOUR));
        System.out.println("HOUR_OF_DAY: " + calendar.get(Calendar.HOUR_OF_DAY));
        System.out.println("MINUTE: " + calendar.get(Calendar.MINUTE));
        System.out.println("SECOND: " + calendar.get(Calendar.SECOND));
        System.out.println("MILLISECOND: " + calendar.get(Calendar.MILLISECOND));
        System.out.println("ZONE_OFFSET: " +
            (calendar.get(Calendar.ZONE_OFFSET) / (60 * 60 * 1000)));
        // in hours
        System.out.println("DST_OFFSET: " +
            (calendar.get(Calendar.DST_OFFSET) / (60 * 60 * 1000)));
        // in hours
}

What is best method to use airdrop to keep documents in sync

I have a an imac and a macbook air 13 inch. Both running Mountain Lion. I use the imac for my primary computer and the Air when I need to travel for business.
I am looking for the best suggestion on how to use the two computers to access the same documents through either a cloud or Airdrop solution. I use Office (Word; excel; PP) for most all business needs. I don't have nor use Keynote, Pages or Numbers, nor do I have any desire to start using those.
Thanks.

This isn't a Dreamweaver question as much as it is an SEO question.
Web searches reveal results based on content inside semantic HTML; not their URLs. So a link to index.html carries the same approximate weight as a link to http://yourdomain.com.
The main diff is that DW cannot manage absolute links for you. It can only manage links that are document or site root relative.
Nancy O.

ActiveX in BradySoft (CodeSoft) - What Class/Method/Object's would I use to send variable form data to BradySoft?

What Class/Method/Object's would I use to send variable form data to BradySoft? I have a basic label setup in BradySoft and I want to send it variable form data (a serial number) from Labview ActiveX. I have attached Brady's ActiveX programmers guide but can't figure out what to use for this. P.S. I would call Brady or TekLynx tech support about this but they have a strict policy whereas BradySoft supports ActiveX but their tech support doesn't provide programming help with it. I figured I'd try the NI Forums.

Aaronb, I presume by publishing an ActiveX programmers manual the BradySoft software installs Active X objects. You may choose to interact with these objects within LabVIEW using Active X controls. The following link will provide a starting point for LabVIEW help topics on Active X communication: Select ActiveX Object Dialog Box
http://zone.ni.com/reference/en-XX/help/371361F-01/lvdialog/insert_active_x_object/
Building a Simple Web Browser Using ActiveX (Example of ActiveX arcitecture)
http://zone.ni.com/devzone/cda/epd/p/id/81 Hope this helps provide a bit of guidance. Cheers!

Can I use classes and methods for a maintenance view events?

Hello experts,
Instead of perform/form, can I instead use classes and methods, etc for a given maintenance view event, lets say for example I want to use event '01' which is before saving records in the database. Help would be greatly appreciated. Thanks a lot guys!

Hi viraylab,
1. The architecture provided by maintenance view
   for using EVENTS and our own code inside it -
   It is provided using FORM/PERFORM
   concept only.
2. At this stage,we cannot use classes.
3. However, inside the FORM routine,
   we can write what ever we want.
   We can aswell use any abap code, including
   classes and methods.
(But this classes and methods won't have any
   effect on the EVENT provided by maintenance view)
regards,
amit m.

How do you know what classes to use ?

Hello,
This may sound daft - but how do you know what classes to use to do a particular task ? For example to do password-related stuff - how would I know which classes are all relevant to that ? Am I supposed to buy a book on the classes as the API documentation doesn't really tell you WHEN to use which classes.

If you're using JSP, then your password field is likely going to be implemented in HTML. So that's nothing to do with Java. (And you can't use a JPassword field in a JSP page.) But when that field comes back to your server, you may be using Java to authenticate it. Even there, the question is not yet what Java method you are going to use, but what methodology. You could have a database to authenticate against, or an LDAP directory. Or you could have the web server use its built-in authentication, which means you don't have to do any Java coding at all. And there are other ways.
So the question before yours is, how do you know what methodology to use? Again, that comes down to experience.

What classes should I use to send/receive bytes inmediately?

What classes should I use to send/receive bytes inmediately? I mean, without using any buffers or whatever (I will implement this on my app), just the faster method.
Is InputStream/OutputStream the lowest level choice?
Thanks!

Hi!
Thank you very much for your help, I appreciate it a lot.
While I test my server, I execute ping www.myclienthost.com -t (my client games are in other office, in the same building, but different ISP) and I don't see anything strange, so I guess network is working perfectly. However, if I use wireshark (sniffer) and I see that my system fails (server does not send acks so client disconnects) is because my acks messages are not sended for 6 o 7 seconds (it should send them every 2 or 3). It seems thread is blocked. and after 6 or 7 seconds one message with 2 or 3 acks together is sent. So, I see that the thread handler blocked for a few seconds and this is doing my server is failing. Why client handler thread on my server is blocked? One question: every 2 or 3 seconds I have a thread that uses sleep that iterates thru client handlers and takes OutputStream and send one ack message for every client handler. My question is, in client handler class I have a method called SendInfo(String whatever) which encrypts and sends through OutputStream, should I protectd this method from accesing from two threads??? as acks thread and client thread can access at the same time. Could this be the problem??
EDIT: In my previous post I forgot to say what I found out with wireshark. Here I explain it. Sorry.
By the way, how can I debug threads?? I would like to know if my client thread is blocked in that critical moment.
Thanks a lot for your ideas and sorry for my English.
Edited by: Ricardo_Ruiz_Lopez on Jan 22, 2009 7:38 AM

What is the difference of using JavaBean and regular classes?

Experts,
I am new to JavaBean(not EJB), and wondering what is the difference of using JavaBean for JSP page compared with using regular Java class?
I know there are Bean tags which save some lines, what else?
What does "serialization" mean compared with "not serializable"?
thanks very much.

No.
A JavaBean is a regular JavaClass that:
1) implements java.io.Serializable
2) Its data members are private, and its data is accessed via getters and setters. You must define the getters and setters. Getters retrive the property, and must be in the format:
public PropertyType getPropertyName()
for most cases. The exception is when the PropertyType is a boolean, in which case you use:
public boolean isPropertyName()
Setters assign values to the property, and are in the form:
public void setPropertyName(PropertyType propValue)
3) There is also a PropertyChangeEvent model that needs to be followed.
A marker interface has no methods you need to implement. It just marks the class as supporting certain operations. In the case of Serializable, it means the class can be written to be an ObjectOutputStream for persistant storage.
As far as an example of JavaBean persistance, take a search on the java.sun.com site for Serializeable
Also, take a look at this: http://java.sun.com/developer/onlineTraining/Beans/beans02/
It concentrates mainly on gui component beans, but not all beans need to be gui parts... There are other pages to look at, but I can't find them at the moment, and I have to run...

What is the advantage of using methods to return objects?

Hello there,
What is the advantage of using static methods to return
objects? Isnt this a Factory Pattern ?
What is the real advantage of using methods to return objects
rather than using public constructors to create objects ?
Can some one please explain
Regards

I think there were two questions. The first (why
static) is well answered but I hope somebody can
answer the general question - why whatever =
createSomething(); as opposed to whatever
= new Something(); - because inquiring minds
want to know.I thought I answered that question. Perhaps I need to be more specific.
For the Singleton pattern, you don't want a new instance (except possibly the first time, if you're using lazy instantiation).
For the Factory pattern, you might not always want an instance of the actual class containing the static methods, so new won't work.
If, on the other hand, neither of the above holds, there is no reason not to use new (unless, of course, anyone can come up with another use of static creators).
RObin

HT5625 if i have multiple apple IDS and i would like to delete all of them except the one I wish to continue using what is the method

In case I have multiple Apple Ids and I want to delete all of them except one , what is the method to be followed.??
Or is it that there is no scope for deletion and the Ids are just disabled

Sorry, Apple ID's cannot be deleted or merged. All you can do is stop using an Apple ID.

How we can use class and methods for the FM of reuse_alv_list_display

Hi Abapers,
Please provide the sample code of class and method of REUSE_ALV_LIST_DISPLAY.
Which Class i can use for this Function module.
I need to write a code using OOPS concept.
I was done the GRID display using this class cl_gui_alv_grid.
But i want only List Display using the class & methods.
Plz provide sample code.
Thanks
Nani.

Hi Nani,
This is the sample code..
*& Report Z_OO_ALV
*& We can Use Two containers in OOALV
REPORT z_oo_alv LINE-COUNT 50.
*types gt_struct type sflight.
DATA BEGIN OF gt_struct.
INCLUDE STRUCTURE sflight.
DATA rcol(4) TYPE c.
DATA colors TYPE lvc_t_scol.
DATA END OF gt_struct.
*ALV GRIDs
DATA gr_alvgrid TYPE REF TO cl_gui_alv_grid.
DATA gr_alvgrid1 TYPE REF TO cl_gui_alv_grid.
DATA gc_custom_control_name TYPE scrfname VALUE 'CC_ALV'.
DATA gc_custom_control_name1 TYPE scrfname VALUE 'CC_ALV1'.
*CONTAINERs
DATA gr_ccontainer TYPE REF TO cl_gui_custom_container.
DATA gr_ccontainer1 TYPE REF TO cl_gui_custom_container.
*FIELDCATALOGs
DATA gt_fieldcat TYPE lvc_t_fcat WITH HEADER LINE.
DATA gt_fieldcat1 TYPE lvc_t_fcat WITH HEADER LINE.
*LAYOUTs
DATA gs_layout TYPE lvc_s_layo.
DATA gs_layout1 TYPE lvc_s_layo.
DATA pt_exclude TYPE ui_functions. "internal table declaration to be passed.
*DATA pt_cell TYPE lvc_t_cell with header line.
DATA : gt_list LIKE gt_struct OCCURS 50 WITH HEADER LINE,
gt_list1 LIKE gt_struct OCCURS 50 WITH HEADER LINE.
*DATA v_ucomm TYPE sy-ucomm.
CALL SCREEN 100.
*& Module display_alv OUTPUT
text
MODULE display_alv OUTPUT.
PERFORM display_alv.
ENDMODULE. " display_alv OUTPUT
*& Module PAI INPUT
text
MODULE pai INPUT.
CASE sy-ucomm.
WHEN 'EXIT'.
PERFORM exit_program.
WHEN 'PICK'.
PERFORM cell_info.
ENDCASE.
ENDMODULE. " PAI INPUT
*& Form display_alv
text
FORM display_alv.
PERFORM prepare_field_catalog CHANGING gt_fieldcat[].
PERFORM prepare_layout CHANGING gs_layout.
PERFORM data_retrival.
IF gr_alvgrid IS INITIAL.
CREATE OBJECT gr_ccontainer
EXPORTING
container_name = gc_custom_control_name
EXCEPTIONS
cntl_error = 1
cntl_system_error = 2
create_error = 3
lifetime_error = 4
lifetime_dynpro_dynpro_link = 5
OTHERS = 6.
IF sy-subrc <> 0.
ENDIF.
CREATE OBJECT gr_alvgrid
EXPORTING
I_SHELLSTYLE = 0
I_LIFETIME =
i_parent = gr_ccontainer
I_APPL_EVENTS = space
I_PARENTDBG =
I_APPLOGPARENT =
I_GRAPHICSPARENT =
I_NAME =
I_FCAT_COMPLETE = SPACE
EXCEPTIONS
error_cntl_create = 1
error_cntl_init = 2
error_cntl_link = 3
error_dp_create = 4
OTHERS = 5
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
PERFORM exclude_tb_functions CHANGING pt_exclude.
PERFORM set_col.
CALL METHOD gr_alvgrid->set_table_for_first_display
EXPORTING
I_BUFFER_ACTIVE =
I_BYPASSING_BUFFER =
I_CONSISTENCY_CHECK =
I_STRUCTURE_NAME =
IS_VARIANT =
I_SAVE =
I_DEFAULT = 'X'
is_layout = gs_layout
IS_PRINT =
IT_SPECIAL_GROUPS =
it_toolbar_excluding = pt_exclude "excluding toolbar functions
IT_HYPERLINK =
IT_ALV_GRAPHICS =
IT_EXCEPT_QINFO =
IR_SALV_ADAPTER =
CHANGING
it_outtab = gt_list[]
it_fieldcatalog = gt_fieldcat[]
IT_SORT =
IT_FILTER =
EXCEPTIONS
invalid_parameter_combination = 1
program_error = 2
too_many_lines = 3
OTHERS = 4
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ELSE.
CALL METHOD gr_alvgrid->refresh_table_display
EXPORTING
IS_STABLE =
I_SOFT_REFRESH =
EXCEPTIONS
finished = 1
OTHERS = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDIF.
PERFORM prepare_field_catalog1 CHANGING gt_fieldcat1[].
PERFORM prepare_layout1 CHANGING gs_layout1.
PERFORM data_retrival1.
IF gr_alvgrid1 IS INITIAL.
CREATE OBJECT gr_ccontainer1
EXPORTING
container_name = gc_custom_control_name1
EXCEPTIONS
cntl_error = 1
cntl_system_error = 2
create_error = 3
lifetime_error = 4
lifetime_dynpro_dynpro_link = 5
OTHERS = 6.
IF sy-subrc <> 0.
ENDIF.
CREATE OBJECT gr_alvgrid1
EXPORTING
I_SHELLSTYLE = 0
I_LIFETIME =
i_parent = gr_ccontainer1
I_APPL_EVENTS = space
I_PARENTDBG =
I_APPLOGPARENT =
I_GRAPHICSPARENT =
I_NAME =
I_FCAT_COMPLETE = SPACE
EXCEPTIONS
error_cntl_create = 1
error_cntl_init = 2
error_cntl_link = 3
error_dp_create = 4
OTHERS = 5
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
PERFORM set_col1.
CALL METHOD gr_alvgrid1->set_table_for_first_display
EXPORTING
I_BUFFER_ACTIVE =
I_BYPASSING_BUFFER =
I_CONSISTENCY_CHECK =
I_STRUCTURE_NAME =
IS_VARIANT =
I_SAVE =
I_DEFAULT = 'X'
is_layout = gs_layout1
IS_PRINT =
IT_SPECIAL_GROUPS =
IT_TOOLBAR_EXCLUDING =
IT_HYPERLINK =
IT_ALV_GRAPHICS =
IT_EXCEPT_QINFO =
IR_SALV_ADAPTER =
CHANGING
it_outtab = gt_list1[]
it_fieldcatalog = gt_fieldcat1[]
IT_SORT =
IT_FILTER =
EXCEPTIONS
invalid_parameter_combination = 1
program_error = 2
too_many_lines = 3
OTHERS = 4
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ELSE.
CALL METHOD gr_alvgrid1->refresh_table_display
EXPORTING
IS_STABLE =
I_SOFT_REFRESH =
EXCEPTIONS
finished = 1
OTHERS = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDIF.
ENDFORM. "display_alv
*& Form prepare_field_catalog
text
-->GT_FIELDCAT text
FORM prepare_field_catalog CHANGING pgt_fieldcat TYPE lvc_t_fcat.
DATA ls_fieldcat TYPE lvc_s_fcat.
ls_fieldcat-tabname = 'gt_list'.
ls_fieldcat-fieldname = 'CARRID'.
ls_fieldcat-scrtext_m = 'Air line code'.
ls_fieldcat-col_pos = 0.
ls_fieldcat-outputlen = 10.
ls_fieldcat-emphasize = 'C400'.
ls_fieldcat-key = 'X'.
APPEND ls_fieldcat TO pgt_fieldcat.
ls_fieldcat-tabname = 'gt_list'.
ls_fieldcat-col_pos = 1.
ls_fieldcat-fieldname = 'CONNID'.
ls_fieldcat-scrtext_m = 'Connection code'.
ls_fieldcat-emphasize = 'C900'.
APPEND ls_fieldcat TO pgt_fieldcat.
ls_fieldcat-tabname = 'gt_list'.
ls_fieldcat-fieldname = 'PRICE'.
ls_fieldcat-scrtext_m = 'PRICE'.
APPEND ls_fieldcat TO pgt_fieldcat.
ENDFORM. "prepare_field_catalog
*& Form prepare_layout
text
-->GS_LAYOUT text
FORM prepare_layout CHANGING gs_layout TYPE lvc_s_layo.
gs_layout-stylefname = 'FIELD_STYLE'.
gs_layout-zebra = 'X'.
gs_layout-grid_title = 'FLIGHT'.
gs_layout-sel_mode = 'A'.
gs_layout-ctab_fname = 'COLORS'.
ENDFORM. "prepare_layout
*& Form data_retrival
text
FORM data_retrival.
SELECT carrid
connid
price
FROM sflight
INTO CORRESPONDING FIELDS OF TABLE gt_list
UP TO 50 ROWS.
ENDFORM. "data_retrival
FORM EXIT_PROGRAM *
FORM exit_program.
CALL METHOD gr_ccontainer->free.
CALL METHOD gr_ccontainer1->free.
LEAVE TO SCREEN 0.
ENDFORM. "exit_program
*& Module STATUS_0100 OUTPUT
text
MODULE status_0100 OUTPUT.
SET PF-STATUS 'STAT'.
SET TITLEBAR 'xxx'.
IF W_CUSTOM_CONTAINER IS INITIAL.
**sets TITLEBAR
PERFORM TITLEBAR.
ENDMODULE. " STATUS_0100 OUTPUT
*& Form prepare_field_catalog1
text
-->GT_FIELDCAT text
FORM prepare_field_catalog1 CHANGING pgt_fieldcat1 TYPE lvc_t_fcat.
DATA ls_fieldcat TYPE lvc_s_fcat.
ls_fieldcat-tabname = 'gt_list1'.
ls_fieldcat-fieldname = 'SEATSMAX'.
ls_fieldcat-scrtext_m = 'MAX. SEATS'.
ls_fieldcat-col_pos = 0.
ls_fieldcat-outputlen = 10.
ls_fieldcat-emphasize = 'C400'.
ls_fieldcat-key = ' '.
APPEND ls_fieldcat TO pgt_fieldcat1.
ls_fieldcat-tabname = 'gt_list1'.
ls_fieldcat-col_pos = 1.
ls_fieldcat-fieldname = 'SEATSOCC'.
ls_fieldcat-scrtext_m = 'SEATS OCCUPIED'.
APPEND ls_fieldcat TO pgt_fieldcat1.
ENDFORM. "prepare_field_catalog
*& Form prepare_layout1
text
-->GS_LAYOUT text
FORM prepare_layout1 CHANGING gs_layout1 TYPE lvc_s_layo.
gs_layout1-stylefname = 'FIELD_STYLE'.
gs_layout1-zebra = 'X'.
gs_layout1-grid_title = 'DETAILS'.
gs_layout-sel_mode = 'C'.
gs_layout1-info_fname = 'RCOL'.
gs_layout-no_toolbar = 'X'.
ENDFORM. "prepare_layout
*& Form data_retrival1
text
FORM data_retrival1.
SELECT seatsmax
seatsocc
FROM sflight
INTO CORRESPONDING FIELDS OF TABLE gt_list1
UP TO 50 ROWS.
ENDFORM. "data_retrival
*& Form exclude_tb_functions
&---- subroutine to exclude toolbar options -
text
-->PT_EXCLUDE text
FORM exclude_tb_functions CHANGING pt_exclude TYPE ui_functions.
DATA ls_exclude TYPE ui_func.
ls_exclude = cl_gui_alv_grid=>mc_fc_maximum.
APPEND ls_exclude TO pt_exclude.
ls_exclude = cl_gui_alv_grid=>mc_fc_minimum.
APPEND ls_exclude TO pt_exclude.
ls_exclude = cl_gui_alv_grid=>mc_fc_subtot.
APPEND ls_exclude TO pt_exclude.
ls_exclude = cl_gui_alv_grid=>mc_fc_sort.
APPEND ls_exclude TO pt_exclude.
ls_exclude = cl_gui_alv_grid=>mc_fc_sum.
APPEND ls_exclude TO pt_exclude.
ls_exclude = cl_gui_alv_grid=>mc_mb_subtot.
APPEND ls_exclude TO pt_exclude.
ls_exclude = cl_gui_alv_grid=>mc_mb_sum.
APPEND ls_exclude TO pt_exclude.
ls_exclude = cl_gui_alv_grid=>mc_mb_filter.
APPEND ls_exclude TO pt_exclude.
ENDFORM. "data_retrival1
*& Form cell_info
text
FORM cell_info. "CHANGING pt_cell TYPE lvc_t_cell.
DATA lt_cell TYPE lvc_t_cell WITH HEADER LINE.
CALL METHOD gr_alvgrid->get_selected_cells
IMPORTING
et_cell = lt_cell[].
LOOP AT lt_cell.
WRITE : lt_cell-col_id , lt_cell-row_id.
ENDLOOP.
MODIFY pt_cell[] from lt_cell[].
ENDFORM. "cell_info
*& Form set_col
text
FORM set_col .
DATA ls_cellcolor TYPE lvc_s_scol.
LOOP AT gt_list.
IF gt_list-price GT 500.
ls_cellcolor-fname = 'PRICE'.
ls_cellcolor-color-col = 5.
ls_cellcolor-color-int = 1.
ls_cellcolor-color-inv = 0.
APPEND ls_cellcolor TO gt_list-colors.
else.
ls_cellcolor-fname = 'PRICE'.
ls_cellcolor-color-col = 3.
ls_cellcolor-color-int = 1.
APPEND ls_cellcolor TO gt_list-colors.
ENDIF.
MODIFY gt_list.
ENDLOOP.
ENDFORM. "set_col
*& Form set_col1
text
FORM set_col1.
data : ind type sy-tabix,
indx type sy-tabix.
loop at gt_list1.
ind = sy-tabix / 2.
indx = sy-tabix - ind.
if indx eq ind.
gt_list1-rcol = 'C500'.
endif.
MODIFY gt_list1.
endloop.
ENDFORM. "set_col
*FORM TITLEBAR.
*SET TITLEBAR 'TITLE'.
*ENDFORM.
*double click on TITLE and write ur title
Thanks,
Samantak.
Rewards points for useful answers.

What is the method used for upload of data

Hi All,
What is the method used for upload of Data from excel spread sheets to SAP HR.
it is Bulk Data from many countries.LSMW or BDC Session Method?
what are country specific infotypes used for PA and OM.
can u plz give the list of country specific infotypes used for PA n OM Module.
Thanks
Archana

Hi Archana,
To Upload bulk data I think BDC is the best and effecient way.
Regarding Infotypes we dont have any country specific Infotypes in OM & PA. In Payroll we do have according to country wise.
I hope you had understood the point
Regards
Pavani
Remainder: Points to be given on answers

Firefox will not maximize. Covers about 1/2 of my monitor and will not max, no matter what method I use. How do I correct this?

My firefox screen is filling only about 1/2 my monitor screen. I cannot maximize it no matter what method I use (F11, manual click & drag on corner). I have rebooted; no change.
== This happened ==
Just once or twice
== I opened Firefox this morning. Has never happened before.

See:
*http://www.imessengr.com/2006/12/how-to-remove-uninstall-sweetim.html
* http://www.sweetim.com/help_simff.asp

What is correct method to deploy cluster aware technology using HA VMs?

Dear all,
I recently had experience creating Hyper-V Server 2012 cluster. This allows for deploying a highly available virtual machine. That's fine. The business machine (virtual machine) becomes highly available. This includes an existing VM enabled to be highly
available or a new VM installed into cluster from scratch.
On the other hand; we have cluster aware applications (SQL Server, SCVMM etc.) which are installed in clustered OS (Windows 2008 R2 Enterprise edition which has failover clustering service) .
Just for clearing concept; what is correct way of deploying a cluster aware technology (SQL Server, SCVMM) in the scenario where the underlying OS; running in VM(s) can be made highly available.
Method 1:
Create simple non clustered VM, install cluster aware application (SQL Server e.g.). Make this VM highly available using Hyper-V cluster. (This seems to be clustering the VM running cluster aware application, not the cluster ware application; which
requires clustering.)
Method 2:
Create HA-enabled VM onto Hyper-V Servers cluster; install cluster aware application within this HA-enabled VM. (This again; the underlying OS/VM is clustered first, the cluster aware application (SQL server or others) how would it leverage
the cluster?)
Please shed light on what is correct method. In both cases it seems the VM running the cluster aware application; is made highly available; meaning leveraging clustering. What about clustering the application
itself? The objective is to be able to not only make the VM highly available; but also deploy clustered SQL Server or other cluster aware technology using such HA VM.
Regards,
Shahzad.

Dear all,
I recently had experience creating Hyper-V Server 2012 cluster. This allows for deploying a highly available virtual machine. That's fine. The business machine (virtual machine) becomes highly available. This includes an existing VM enabled to be highly
available or a new VM installed into cluster from scratch.
On the other hand; we have cluster aware applications (SQL Server, SCVMM etc.) which are installed in clustered OS (Windows 2008 R2 Enterprise edition which has failover clustering service) .
Just for clearing concept; what is correct way of deploying a cluster aware technology (SQL Server, SCVMM) in the scenario where the underlying OS; running in VM(s) can be made highly available.
Method 1:
Create simple non clustered VM, install cluster aware application (SQL Server e.g.). Make this VM highly available using Hyper-V cluster. (This seems to be clustering the VM running cluster aware application, not the cluster ware application; which
requires clustering.)
Method 2:
Create HA-enabled VM onto Hyper-V Servers cluster; install cluster aware application within this HA-enabled VM. (This again; the underlying OS/VM is clustered first, the cluster aware application (SQL server or others) how would it leverage
the cluster?)
Please shed light on what is correct method. In both cases it seems the VM running the cluster aware application; is made highly available; meaning leveraging clustering. What about clustering the application
itself? The objective is to be able to not only make the VM highly available; but also deploy clustered SQL Server or other cluster aware technology using such HA VM.
Regards,
Shahzad.
With SQL Server both M1 and M2 are by far the best solutions. See guest VM cluster is non-optimal as SQL Server works better with own clustering features (AlwaysOn, see link below). And HA would make VM re-boot on another physical host so there would be
both downtime and potential data loss. Run SQL Server in a pair of VMs on a different physical hosts, configue AlwaysOn (use failover SMB share as a witness) and you'll be fine. See:
Overview of AlwaysOn Availability Groups (SQL Server)
http://technet.microsoft.com/en-us/library/ff877884.aspx
How to Build SQL Server
2012 AlwaysOn Hyper-V Virtual Machines
http://social.technet.microsoft.com/wiki/contents/articles/6198.how-to-build-sql-server-2012-alwayson-hyper-v-virtual-machines-for-demos-emu-build.aspx
SQL Server 2012 AlwaysOn High Availability and Disaster Recovery Design Patterns
http://blogs.msdn.com/b/sqlcat/archive/2013/11/20/sql-server-2012-alwayson-high-availability-and-disaster-recovery-design-patterns.aspx
Also the best place to ask about SQL Server High Availability is dedicated MSFT group here:
SQL Disaster Recovery Forum
http://social.technet.microsoft.com/Forums/sqlserver/en-US/home?forum=sqldisasterrecoveryHope
this helped :)
StarWind VSAN [Virtual SAN] clusters Hyper-V without SAS, Fibre Channel, SMB 3.0 or iSCSI, uses Ethernet to mirror internally mounted SATA disks between hosts.

What classes or methods to use?

Similar Messages

Maybe you are looking for