ActiveX in BradySoft (CodeSoft) - What Class/Method/Object's would I use to send variable form data to BradySoft?

What Class/Method/Object's would I use to send variable form data to BradySoft? I have a basic label setup in BradySoft and I want to send it variable form data (a serial number) from Labview ActiveX. I have attached Brady's ActiveX programmers guide but can't figure out what to use for this. P.S. I would call Brady or TekLynx tech support about this but they have a strict policy whereas BradySoft supports ActiveX but their tech support doesn't provide programming help with it. I figured I'd try the NI Forums.

Aaronb, I presume by publishing an ActiveX programmers manual the BradySoft software installs Active X objects. You may choose to interact with these objects within LabVIEW using Active X controls. The following link will provide a starting point for LabVIEW help topics on Active X communication: Select ActiveX Object Dialog Box
http://zone.ni.com/reference/en-XX/help/371361F-01/lvdialog/insert_active_x_object/
Building a Simple Web Browser Using ActiveX (Example of ActiveX arcitecture)
http://zone.ni.com/devzone/cda/epd/p/id/81 Hope this helps provide a bit of guidance. Cheers!

Similar Messages

Need to know of a method / process that can be used to send the same msg to all those appearing in my email listings with the same extension after the "@" sign in their address(es) on my macbook [e.g., with "@gov.ca"; Snow Leopard].

Need to know of a method / process that can be used to send the same msg to all those appearing in my email listings with the same extension after the "@" sign in their address(es) on my macbook [Snow Leopard].

If you simply want to send the exact same message to everyone in your address book with emails ending in "@whatever.com", you can do the following:
Create an email with subject, message and attachments but no addresses
Open Address Book, All Contacts
Search in Address Book for @whatever.com
Select the results and drag them into the To: or Bcc: field of the email. If Bcc: then put your email address in the To: field.
Send the email
This will not personalize the emails (such as with "Dear firstname:" at the top of the message) but it will let you send an idential message to everyone who meets your criteria.

What camera raw default settings would you use for the Canon 5D Mark 3. I have PS CS6. Thank you.

What camera raw default settings would you use for the Canon 5D Mark 3. I have PS CS6. Thank you.

Really, this is a question you should be asking yourself...
What do you shoot? Makes a difference...
Typical ISO that you shoot? Makes a difference...
Shooting for clients or yourself? Makes a difference...
Look, there is no magic bullet...the ACR/LR "Default" should only be changed for those adjustments you make 70-90% of the time and sould not be confused with image by image adjustments...
So, as asked, your question can not really be answered other than to say, use a default that suits you.

Reg: declaring classes, methods, objects

Hi,
Can anyone help me on how do i declare classes and methods in webdynpro. My requirement is to do some functionality in a method of a class and reuse the code wherever i require.
Can anyone help me on this?
Thanks
Regards
Naveen

Hi Naveen George ,
You can create methods in both component controller and on each view also.
methods dexlaring in comp controller will be common among all view
you can call comp controller method like comp_controller->method name in other view
and own methods can be called like wd_this-> method name.
you can also use wizard to call methods
for calling own methods you have to select current controller radio button and for comp_controller you hacve to use used controller.
you can create method by going to method tab both in view and component controller
Regards
Sarath

How use XSD and Java? What classes/methods?

I want to use an XSD instead of a DTD with my XML and Java. Does anyone know the classes/methods I should use to do this? Is it even possible? Can you send sample code?

here is the helper function... hope it helps...
import java.io.IOException;
import java.math.*;
import java.text.*;
import org.xml.sax.Attributes;
import org.xml.sax.ContentHandler;
import org.xml.sax.ErrorHandler;
import org.xml.sax.Locator;
import org.xml.sax.SAXException;
import org.xml.sax.SAXParseException;
import org.xml.sax.XMLReader;
import org.xml.sax.helpers.XMLReaderFactory;
public class SAXParserDemo
     public SAXParserDemo()
     public void performDemo(String uri)
          System.out.println("Parsing XML file: " + uri + "\n\n");
          ContentHandler contentHandler = new MyContentHandler();
          ErrorHandler errorHandler = new MyErrorHandler();
          try
               XMLReader parser = XMLReaderFactory.createXMLReader("org.apache.xerces.parsers.SAXParser");
               parser.setContentHandler(contentHandler);
               parser.setErrorHandler(errorHandler);
               parser.setFeature("http://xml.org/sax/features/validation", true);
               parser.parse(uri);
          catch(IOException e)
               System.out.println("Error reading URI: " + e);
          catch(SAXException e)
               System.out.println("Error in parsing: " + e);
     public static void main(String[] args)
          if(args.length != 1)
               System.out.println("Usage: java SAXParserDemo [XML URI]");
               System.exit(0);
          String uri = args[0];
          SAXParserDemo parserDemo = new SAXParserDemo();
          parserDemo.performDemo(uri);
class MyErrorHandler implements ErrorHandler
     public void warning(SAXParseException exception) throws SAXException
          throw new SAXException("Warning encountered."+exception);
     public void error(SAXParseException exception) throws SAXException
          throw new SAXException("Error encountered: "+exception);
     public void fatalError(SAXParseException exception) throws SAXException
          throw new SAXException("Fatal error encountered."+exception);
class MyContentHandler implements ContentHandler
     private Locator locator;
     public void setDocumentLocator(Locator locator)
          //System.out.println("     * setDocumentLocator() called");
          this.locator = locator;
     public void startDocument() throws SAXException
          //System.out.println("System Message: Parsing begins...");
     public void endDocument() throws SAXException
          //System.out.println("System Message: ...Parsing ends.");
     public void processingInstruction(String target, String data) throws SAXException
          //System.out.println("System Message: PI: Target: "+target+" and Data: "+data);
     public void startPrefixMapping(String prefix, String uri)
          //System.out.println("System Message: Mapping starts on prefix "+prefix+" mapped to URI "+uri);
     public void endPrefixMapping(String prefix)
          //System.out.println("System Message: Mapping ends on prefix "+prefix);
     public void startElement(String namespaceURI, String localName, String rawName, Attributes atts) throws SAXException
          //System.out.println("System Message: startElement: "+localName);
          if(!namespaceURI.equals(""))
               //System.out.println("System Message: in namespace "+namespaceURI+" ("+rawName+")");
          else
               //System.out.println("System Message: has no associated namespace");
          int i;
          for(i=0;i<atts.getLength();i++)
               //System.out.println("System Message: Attribute: "+atts.getLocalName(i)+"="+atts.getValue(i));
     public void endElement(String namespaceURI, String localName, String rawName) throws SAXException
          //System.out.println("System Message: endElement: "+localName+"\n");
     public void characters(char[] ch, int start, int length) throws SAXException
          String s = new String(ch, start, length);
          //System.out.println("System Message: characters: "+s);
     public void ignorableWhitespace(char[] ch, int start, int length) throws SAXException
          String s = new String(ch, start, length);
          //System.out.println("System Message: ignorableWhitespace: ["+s+"]");
     public void skippedEntity(String name) throws SAXException
          //System.out.println("System Message: Skipping entity: "+name);
}

What SAP Business Objects Web Services to use with XI3.0

I'm new to BO and is tasked to install it.
What I've installed already is the BOE XI3.0 version and now want to install Xcelsius 2008 Enterprise.
What I can not figure out from the Xcelsius manual or SDN or OSS is what the Business Objects Web Services are the manual instructs you to install with Xcelsius.
I did find something called
BusinessObjects Web Services XI for Windows and downloaded it but is not sure if this is what I need to install as the business Object Web Services on XI 3.0
Can someone please direct me in the correct direction
Thanks in advance
Liezel

Hi,
i am not sure if i understand your question. If you mean Query as a Webservice (QaaWS), this component should be part of your XI 3.0 Enterprise installation. You could also use the flynet (www.flynet.co.uk) which is part of Xcelsius Enterprise 2008 SP1.
Best Regards
Ulrich
Edited by: Ulrich Hambuch on Sep 29, 2008 1:09 AM

4:3/16:9 combo. What easy setup & export settings would you use?

Trying to export a sequence combing 4:3 and 16:9 clips, expecting to get a dvd that plays 16:9 at full screen and pillarboxed 4:3. Instead I get full screen 4:3 and letterboxed 16:9 on my flat screen tv. Shot the 4:3 on my pre-16:9 Sony VX1000, and the 16:9 on my Sony Z5U. Working on FCE 4.0 and authoring on iDVD.
Have tried different easy setups and compression types, but always check the 16:9 choice when it comes up in FCE or iDVD. What am I missing here?
Thanks

For the future change your preset to the correct DV Anamorphic preset.
For this sequence I'm not sure. Try this. Set the correct DV Anamorphic preset and make a new sequence. Copy and paste the contents of the incorrect sequence and paste into the correct one. Select all the clips and use the Remove Attributes function. This should reset the anamorphic material into the correct aspect ratio. I'm not sure what it's going to do to the 4:3 media. Try it.

I updated my iPhone 4 to iOS 6 an I can connect to wifi and it will work for a short period of time until it stops loading big pages such as wifi or safari but it can send and deliver iMessages what should I do? I'm using up a lot of data now lol

.

I couldn't find the edit button on my original post so I am posting an update here.
I have gone through more apps and have had good luck on all but one more. And it's not that the app doesn't work, I am talking about the Yahoo Weather app, It works fine, but when you swipe between cities the screen lags a bit and it sometimes doesn't move between pages the way it should. On iOS 7.1.2 it was smooth as butter but on iOS 8.0, not so much. I will post a note in the app store to let them know. I really like the Yahoo app better than the new stock app.
I have been going through my games and they all work fine. Angry Birds (Original and Stella), Canabalt, Minecraft, Bejeweled 2, Silly Walks, PopWords, Doodle Jump, Deep Green all seem to work just fine.
Starbucks app works as it should.
I will stop back again next week after I have had the weekend to play with it in detail and post my thoughts again.

What kind of audio filter would i use.

i need an audio filter that will bring out a distant clapping noise thats you cant even hear during playback. i have raised the dB as high as possible. is there a way to get it heard at all?

Just be aware, that if the audio is very slight and you raise the level .. you will also raise the levels of any surrounding room noise, etc ... so you will get a lot of hiss and maybe even echo. You can also double up the clip to increase the volume but I doubt you would be left with anything useful
Been there, done that, cursed the cameraman

What is the best file type to use when dealing with text data?

Hello,
I am trying to read off text information from a file stored on the phone. I am currently using a txt file to store the data; however the input streaming process is very slow. Is there another way, or file type I can use which is much quicker?
Regards,
vj

do buffering in stead of reading char by char.

How do you know what classes to use ?

Hello,
This may sound daft - but how do you know what classes to use to do a particular task ? For example to do password-related stuff - how would I know which classes are all relevant to that ? Am I supposed to buy a book on the classes as the API documentation doesn't really tell you WHEN to use which classes.

If you're using JSP, then your password field is likely going to be implemented in HTML. So that's nothing to do with Java. (And you can't use a JPassword field in a JSP page.) But when that field comes back to your server, you may be using Java to authenticate it. Even there, the question is not yet what Java method you are going to use, but what methodology. You could have a database to authenticate against, or an LDAP directory. Or you could have the web server use its built-in authentication, which means you don't have to do any Java coding at all. And there are other ways.
So the question before yours is, how do you know what methodology to use? Again, that comes down to experience.

Need class method example for updating infoype15

Hi All,
I need to update infotype 15 without using BDC and HR_INFOTYPE_OPERATION function module, i have suggexted to use Class methods please can any one help in this regards with sample code of updation of infotype with class methods,
Regards,
Reddy

Hi
You can use the following interface:
IF_HRPA_PLAIN_INFOTYPE_ACCESS - HR: Writing Infotype Records
Interface for Writing Infotypes
This interface permits simplified write accesses for infotypes. In particular, such accesses function for "simple" infotypes only. By definition, all infotypes that use CL_HRPA_INFOTYPE_CONTAINER as container class are simple. All other infotypes cannot be processed or can only be processed in a basic way using this interface.
Regards

What function would you use instead of "IF" when referencing durations from a pop-up menu. Ie; if c4 equals 1h enter 280, if c4 equals 30m enter 160, etc. IF works fine if c4 is formatted as text but returns 0 when formatted as pop-up.

What function similar to IF would one use when the reference cell is a pop-up menu of items in duration format?
Example: if C4 equals 1h enter 280, if C4 equals 30m enter 160, etc
i can get it to work fine if I format the cell to text but I not only need it pop-up, I also need it to be written in duration format because it's used as duration in other functions.
thank you for your help in advance
Christina

Hi Christina,
A screenshot is always helpful.
C4 is your popup? You want to chose a duration there and have 280 or 160 show up somewhere else? Are they the results of a mathmatical formula or do you want a lookup table to show them?
I suspect something else is going on in your table. I have no trouble having a popup recognized as a duration:
The formula in C2 =DUR2MINUTES(B2) displaying "60" as expected. Note that "60" is not a duration. If I want C2 to be a duration I need the formula to read:
=DUR2MINUTES(B2)&"m".
I hope this helps, if not, post a screenshot including relevant formulas.
quinn

What website does iMessage use to send pictures

Hi. I have an iPad 2 and a Mac Mini that aren't able to send or receive pictures. My wifi is restricted, and I need to know what website it is that apple iMessage uses to send its pictures so that I can submit it for approval.
Thanks!!

Hopefully this will help: Using FaceTime and iMessage behind a firewall

What format to input $currentdate(datetime) Global Variable in Data Services Management Console?

What is the correct input format for the datetime Global Variable in Data Services Management Console?
I've tried several formats and keep getting a syntax error.
The DSMC is Version: 14.0.3.451
I'm a new user and learning as I go.
Thanks for your help.

Hi,
if you get syntax error as below,
Syntax error at line <1>: <>: near <.04> found <a float> expecting <+, ||, DIVIDE, MOD, *, SUBVARIABLE, a decimal>.
1 error(s), 0 warning(s).
Check and fix the syntax and retry the operation.
Error parsing global variable values from the command line: <$sedate=2014.12.04 12:00:00;>.
Check the syntax and try again.
solution is simple
Place the global variable value in single quotes '2014.12.04 12:00:00'

ActiveX in BradySoft (CodeSoft) - What Class/Method/Object's would I use to send variable form data to BradySoft?

Similar Messages

Maybe you are looking for