What do I do in Kotoeri to display furigana above Japanese Kanji?

What do I do in Kotoeri to have the furigana/pronuncation/reading of Japanese kanji display above the kanji characters in a Pages document?

PeterBreis0807 wrote:
LightwayText is definitely an option anyway.
Yes, it is an option, but not an option I would recommend.
iText Express does not seem to have furigana. It is anyhow not in the same place in the menu as iText Pro. It does have vertical writing, though, and that is not bad.
iText Pro and LightWayText have both vertical writing and furigana.
The real problem with all three applications is that the format of their Japanese features is not outwards compatible. I have not been able to save to any format that can be opened by any other furigana-able application, like OpenOffice or MS Office.
I would hesitate a lot before tying myself to a file format that is supported by just one application or company, and which cannot be opened by other applications. Hence my recommendation of OpenOffice, or, if you have access to a Japanese or English version, MS Word.
If someone finds a way to export the Japanese features to more standard file formats, the situation changes, of course.

Similar Messages

When I upgraded to FF 3.6, the line in the FF header with file, edit, view, etc is no longer visible. What do i need to do to display this line?

When FF starts, the file, edit, etc line is not displayed. What do I need to do to display this line?
Bill
== This happened ==
Every time Firefox opened
== I upgraded to FF 3.6

'''''"...the file, edit, etc line is not displayed"''''': That's the Menu Bar; see below.
'''Can't see the Menu Bar''' (File, Edit, View, History, Bookmarks, Tools, Help)?
Turning the Menu Bar on and off is a new feature in version 3.6.
''(~~red:Linux & OSX see~~: [[Menu bar is missing]] )''
''Windows'' Method 1. '''''Hold down''''' the key and press the following letters in this exact order: V T M then release the key
''Windows'' Method 2. Tap once on the F10 key, while the Menu bar is visible, choose "View > Toolbars", click "Menu Bar" so that a check mark is placed next to Menu Bar
''Windows'' Method 3. Tap once and release the key. The Menu Bar will be displayed; then choose ~~red:V~~iew > ~~red:T~~oolbars and click on ~~red:M~~enu Bar so that a check mark is placed next to Menu Bar
The Menu Bar should now be displayed permanently, unless you turn it off again using View > Toolbars. Check mark = displayed, NO check mark = not displayed.
See:
http://support.mozilla.com/en-US/kb/Menu+bar+is+missing
http://kb.mozillazine.org/Toolbar_customization#Restoring_missing_menu_or_other_toolbars
'''Navigation Toolbar, Bookmarks Toolbar and other Toolbars''' under View > Toolbars. Clicking on one of them will place a check mark (display) or remove the check mark (not displayed).
'''To display the Status Bar''', View, then click Status bar to place a check mark (display) or remove the check mark (not displayed).
'''Full Screen mode'''
http://kb.mozillazine.org/Netbooks#Full_screen
Also see:
''' [[Back and forward or other toolbar buttons are missing]]'''
'''[[Navigation Toolbar items]]'''
'''[http://support.mozilla.com/en-US/kb/How+to+customize+the+toolbar How to customize the toolbar]'''

What to look for when purchasing external display

Hey everyone,
First and foremost I want to say I am a web developer and graphic designer so what I am looking for is a display (not too big) 20" - 23" TV OR Monitor. This way when I am developing I am not making things HUGE so i can see them while other viewers can't. I have seen the display on a 30" screen and no that isn't going ot work.
I am now searching for an external display for my newly built office but I don't know what to look for besides DVI support. What resolution do I need to make sure it goes to? There is just so many options when looking at TVs or Monitors..
any input?

DVI support is a must and most LCDs in the size that you are looking for are going to have it.
Your MB can drive a display with a resolution of up to 1920 x 1200 which just happens to be the resolution of the 23" Apple Cinema HD Display. I didn't want to pay Apple prices for a display, so I went looking at Dell. I picked up a 20" 2007WFP display from them for about $360 shipped and it works like a charm with the Apple Mini-DVI to DVI adapter.
I prefer displays that use a S-IPS panel over the more common and cheaper TN panels. S-IPS is much better for color reproduction and that is why Apple uses them in their Cinema Displays. Dell uses the same panel is some of their 20" models - I got one - but some buyers are very upset that they got a TN panel instead of the S-IPS panel. I was lucky I guess.

What do I need to do to display a MS Word, Excel or PDF document in browser

Hi, Right now I have photos loaded and displayed in my HTML document in the browser next to a report...
What do I need to do to display a MS Word, Excel or PDF document in a browser?
I use the following procedure to load the content to the region of my HTML .
This gives an EDIT link to the photo...
select
'[img src="#OWNER#.display_thumb?p_file_id=' || nvl(file_catalog_id,0) || '" /]' "File"
from "FILE_CATALOG"
where "FILE_CATALOG_ID" = :P9_FILE_CATALOG_ID
This is the procedure to load the content to the region of my HTML .
create or replace PROCEDURE "DISPLAY_THUMB" (p_photo_id in number)
as
l_mime varchar2(255);
l_length number;
l_file_name varchar2(2000);
lob_loc BLOB;
begin
select mime_type, thumbnail, photo_name, dbms_lob.getlength(thumbnail)
into l_mime, lob_loc, l_file_name, l_length
from photo_catalog where photo_catalog_id = p_photo_id;
-- Set up HTTP header
-- Use an NVL around the mime type and if it is a null, set it to
-- application/octect - which may launch a download window from windows
owa_util.mime_header(nvl(l_mime,'application/octet'), FALSE );
-- Set the size so the browser knows how much to download
htp.p('Content-length: ' || l_length);
-- The filename will be used by the browser if the users does a "Save as"
htp.p('Content-Disposition: filename="' || l_file_name || '"');
-- Close the headers
owa_util.http_header_close;
-- Download the BLOB
wpg_docload.download_file( Lob_loc );
end;

These were supplied from Justin in Experts Exchange..
For PDF, see here:
http://www.adobe.com/support/techdocs/328233.html
http://www.adobe.com/support/techdocs/331025.html
For Word docs, see here:
http://www.shaunakelly.com/word/sharing/OpenDocInIE.html
Any other input... any AJAX?

I installed CS6 on my new retina MacBook pro laptops. InDesign and Acrobat display document pixilated. I ran the updates and it fixed Illustrator and Photosho, but not InDesign and Acrobat. What can I do to make them display in high resolution? HELP!

I installed CS6 on my new retina MacBook pro laptops. InDesign and Acrobat display document pixilated. I ran the updates and it fixed Illustrator and Photosho, but not InDesign and Acrobat. What can I do to make them display in high resolution? HELP!

InDesign CS6 is not optimized for retina displays. You’ll need to move to Creative Cloud for retina compatibility.

Pls its very urgent - i dropped by iphone 3G and the display became very dim soon after and it still remains the same - pls advise what should be done to bring the display back to normal

Pls its very urgent - i dropped by iphone 3G and the display became very dim soon after and it still remains the same - pls advise what should be done to bring the display back to normal

sounds like you broke the display when you dropped it. There's nothing we users here can do for you.
Since the iPhone warranty does not cover accidental damage, you will have to pay to have your phone repaired or replaced. You can bring it into Apple for an out of warranty exchange in the country of purchase, or you can find a 3rd party iPhone repair store in your area.

Firefox 24 Android what is the about:config setting to display the full URL address again?

Firefox 24 Android what is the about:config setting to display the full URL address again?
Example this:
http://www.thewindowsclub.com/eulalyzer-review-download
instead of just this:
EULAlyzer: Free EULA analyzer software for Windows
In the address bar?

hello postewar, set ''browser.chrome.titlebarMode'' to 1.

What happened to the 30 inch Cinema display?

What happened to the 30 inch Cinema display?
I went into the Apple store to purchase one, all they had was the (too small) 27 inch with the ugly black border.
I did find a few used 30 inch Cinema displays on ebay, they are over $1100 USED.
Any suggestions, for a 30 inch display?

No suggestions, apart from changing to a non-Apple display such as a LaCie one.
I think Apple really makes a mistake with the new displays - they are nifty, granted, if you want to watch TV or the like, but they'll loose the professionals, working all day long with their displays.
1. the new displays have an excellent resolution, no trouble there, but they are like mirrors, reflecting lamps, etc. and very tiring for the eyes. That's already a problem with my MacBook Pro but I've got to accept it - what else is there to do - and fortunately it's only my secondary system.
2. we have gotten used to 30" and do not want to downgrade.
I am a translator and need to work with technical plants and several open files, so 30" really helped facilitate work. And now that's all gone as the 27" display definitely is not up to scratch for day-long work...
I ordered a 30" display right when it became available, so it's quite old now. I worry what I'll do when it breaks down ...
Suzanne

What do i do if my ipod displays this message "this ipod cannot be used because the mobil device service is not started"

what do i do if my ipod displays this message "this ipod cannot be used because the mobil device service is not started"

Make sure the Apple Mobile Device Service is installed and running. I would start with this Apple support document.
http://support.apple.com/kb/ts1567
B-rock

Hi i would to ask what is wrong with my iphone4 its display apple icon only

hi i would to ask what is wrong with my iphone4 its display apple icon only,,,tnx

Hi
Try resetting your iPhone (Hold sleep/wake & home button for 10 seconds)
If that doesn't work, then you may need to connect your iPhone to iTunes, and restore it.
iTunes: Backing up, updating, and restoring your iPhone, iPad, or iPod touch software

Chart showing Dots displayed name above it..

Hi,
Im trying to get a chart showing dots (and some name should be displayed above dot)...Can anybody telll me whats the name of that chart and mostly im asking u for a link of that particular type of chart..(ie. chart showing dots as well as displaying some name above dot)..
i will be very happy if you would give me the link for that type of chart..I have searched in googl,but I just got a Dotted chart, but there is no name displayed above dot...
Thanks in advance...

Maybe I am just stupid BUT I don't have a clue what a "Chart showing Dots displayed name above it." is. Could you elaborate?

Displaying problem of Transactional iview -- Displaying ~ITS~ above iview

Hi ,
A transactional iview is created and assigned to a workset .
Its working fine.
When it is displaying , I closed the detailed Navigational panel by clicking on the arrow of the iview in content area . so that the iview may also occupy the detailed navigation area . It is displaying ITS above the iview that is below workset tab area .
When i again clicked on the arrow to see the detailed navigation .....it is again show one more time ITS ...as
ITSITS.....
when ever iam closing and opening detailed navigation area ....subsquently ITS message increasing....ITSITSITS.......
Can any one provide me solution for not displaying ITS message....
Version : EP 7.0 , sp12

Hi Sumit,
Check out your Interner Explorer settings, it happens sometime if your secutiry setting are kept high.
Change the Privacy setting to Medium or Low.
Thanks,
Trikanth

What's with the number in a red circle above the Facetime icon in the dock?

What's with the number in a red circle above the FaceTime icon? How do I get rid of it?

I'm interested in this too, kongakut2012. I can't see an envelope either. I discovered that the number probably meant that I had a missed call, but when I cleared all recent calls (including the missed one) the number didn't go away. So -- where's the envelope, please???

Iam using a macbook with a japanese keyboard, what should i press to change a character from romanji to kanji, the prompt ask me to type my name in kanji?

iam using a macbook with a japanese keyboard, what should i press to change a character from romanji to kanji, the prompt ask me to type my name in kanji?

Do you have a Japanese name? If not, you would have to make one up to type it in Kanji. What exactly are you trying to do?

On connecting to itunes or charger iPhone 5 beeping continously and I am unable see anything on display. In itunes I can see everything when I connect to computer. What could be the issue with my display and how to fix it.

My iphone power button is not working so today I decided to replace it, on opening few screws I was unable to continue as I was not able to open all the screws on the iphone. So far I had managed to disconnect display panel & battery only. So I decided to not to replace button myself and I closed it. After closing I am able to see iphone 5 connected to itunes and I can see all my data, however it continuesly beeping when connected to charger or computer. Also I do not see anything on display. Before opening the iphone everything was working fine now I can't see anything on screen.
I do not see any hardware demage or anything like that, can anyone suggest what could be the problem?
Please help

Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Try each of these in order until the issue is resolved.
Everything that cames in the box is included in the 1year warranty, unfortunately you're just outside of that warranty. Regardless, if the above troubleshooting does not resolve, take the device to Apple and they can determine if the issue is the device, the charger(s) or something else.

What do I do in Kotoeri to display furigana above Japanese Kanji?

Similar Messages

Maybe you are looking for