What does 'include render files' option mean for when I duplicate a project. I deselected it and the duplicated file is very slow so maybe this has affected it. It's a shame cause original project is deleted. Have I lost the rendered files? Thanks

What does 'include render files' option mean for when I duplicate a project. I deselected it and the duplicated file is very slow so maybe this has affected it. It's a shame cause original project is deleted. Have I lost the rendered files? Thanks

Yes, if you duplicate without the render files and delete the original project you lose the render files. But render files get recreated - automatically if you have it set in the preferences (which is the default option). It just takes time.

Similar Messages

  • What does 64-bit 33 MHz mean for my PCI slots?

    Hi all,
    I was looking at my specs for my G4 and saw this under the PCI slot expansion section, 64-bit 33 MHz. What does it mean and what can I add to these slots to expand my Mac to the max? I know I can add video cards, controller cards,etc. What else?
    Thanks
    web dude

    Hi! PCI cards that are Mac compatible. Graphics cards, usb/firewire, gigabit ethernet cards, wireless cards and disk controller cards are the main ones. Tom

  • HT201250 what does reported "error code 6584" mean ?

    What does reported "error code 6584" mean ? when trying to get into my time machine back up.

    First, I suggest you make another full backup to a locally-attached external hard drive. You should do that anyway. One backup isn't enough to be safe, and backing up over a network is less reliable than backing up locally. Then try each of the following steps that you haven't already taken.
    1. Restart the backup device. You can do that by disconnecting and reconnecting the power cord.
    2. Open the Time Machine pane in System Preferences and check that the device is selected as a destination. If it isn't, select it and try again.
    3. Hold down the option key and select Verify Backups from the TM menu in the menu bar (not the Dock icon.) This operation may take a long time. If the menu-bar icon (a clock that runs backwards) isn't showing, check Show Time Machine in menu bar in the preferences.
    4. Erase the backup device. With a Time Capsule, you do that from within the AirPort Utility application; see its built-in help for details. All backups on the device will be lost, so don't do this until you've backed up to another device. After erasing, select the device again as a backup destination in the TM preference pane. The first backup should be made over a wired connection, if possible.

  • What does a grey file folder and ? mark blinking mean on my macbook?

    What does a grey file folder and ? mark blinking on my macbook mean and how do I fix it???

    With 10.4, 10.5 or 10.6 put your install DVD into the optical drive (CD/DVD drive) and reboot. Be sure to either use the disc that came with your Mac, or, if you installed a later Mac OS X version from disc, use the newer disc. As soon as you hear the boot chime, hold down the "c" key on your keyboard (or the Option Key until the Install Disk shows up) until the apple shows up. That will force your MacBook to boot from the install DVD in the optical drive.
    When it does start up, you'll see a panel asking you to choose your language. Choose your language and press the Return key on your keyboard once. It will then present you with an Installation window. Completely ignore this window and click on Utilities in the top menu and scroll down to Reset Password. After resetting the password use Startup Disk from the same menu to choose your hard drive for startup and restart.
    With 10.4, 10.5 or 10.6 if you don’t have an install disk check this article. http://www.macyourself.com/2009/08/03/how-to-reset-your-mac-os-x-password-withou t-an-installer-disc/
    If you're running 10.7 Lion check this article
    http://osxdaily.com/2011/08/24/reset-mac-os-x-10-7-lion-password/
    With 10.8 restart holding the Command and R keys, then from the drop down
    of actions, choose Terminal.  When Terminal opens type:
    resetpassword
    and press enter.
    You will get a reset password window from which you can select the user you want to reset, the admin account in your case.  Type a new password twice, do not do anything with the hint box.  Click Save, then confirm you want to do this reset.  Then click apply to the user's home directory, and click the apple in the left corner, and choose Restart.

  • What does Warning SUID file System/Library/Core has been modified and will not be repaired mean?

    what does Warning SUID file System/Library/Core has been modified and will not be repaired mean how does that happen?

    its a Macbook Air 2009 i clicked on notebooks yet it put iPod

  • What does Transparent Networking Substrate (TNS) mean ?

    Hello,
    what does Transparent Networking Substrate (TNS) mean?
    I searched several Oracle documentations but couldn't find a plain explanation!
    Thanks
    Axel

    In addition to the glossary definition...
    For what most people care about, TNS is a layer that transparently allows you to use a variety of different methods to resolve database aliases. You can configure a tnsnames.ora file, you can set up Oracle Names, an LDAP directory, or you can use host names.
    Justin
    Distributed Database Consulting, Inc.
    http://www.ddbcinc.com/askDDBC

  • What is "FND : Diagnostics %"  profile option used for ?

    What is "FND : Diagnostics %" profile option used for ?
    How is it different from "FND : Debug%" profiles ?

    I guess my above update was misleading (Sorry for that) .. Please find below more details about (FND: Diagnostics) and (FND: Debug Log Enabled):
    Both profile options are used to configure logging, the difference between them is (FND: Debug Log Enabled) is a database profile option used to configure logging while (FND: Diagnostics) is used to configure logging to screen.
    Logging to screen provides:
    - The ability to enable logging on a per HTTP request or per HTTP session basis.
    - Dynamic configuration which does not require restarting any servers or changing any log profiles.
    - A convenient lightweight mechanism to diagnose performance issues. Each message is timestamped to the millisecond.
    If Logging to Screen is enabled, then the Java log messages generated for a particular HTTP Request-Response are buffered in memory and appended to the end of the generated HTML page.
    This feature does not affect any existing configurations of file or database logging. File or database logging continues to behave per the configured middle tier log properties and/or log profile values.
    Note that this mechanism currently provides only Java layer messages. Regular file or database logging should be used if messages from other layers (e.g., PL/SQL) are needed.
    In brief ..
    FND: Diagnostics (Self-Service) --> To see this, Login as that user and navigate to self-service, Click the Diagnostics link in the upper right corner
    - Default = “No”
    - Recommendation = “No”
    - Requires APPS password to use Examine function
    - Usually set to “Yes” during development

  • What does a blinking file folder with a question mark indicate?

    What does a blinking file folder with a question mark indicate?  I cannot get past it or do anything with the unit.

    glamiera wrote:
    What does a blinking file folder with a question mark indicate?
    That's the firmware telling you it can't find the operating system it's been assigned to boot from.
    It could be because it forgot somehow, or the operating system is no longer there or readable or the hardware holding the operating system has failed.
    Hold the power button to force a hardware shutdown, then reboot holding the option/alt key held down on the wired or built in keyboard, icons will hopefully load on the screen and if OS X appears, click the arrow to boot from it.
    Once in OS X, head to System Preferences > Startup Disk and select your boot drive so it can remind the firmware.
    If there is no OS X boot volume, just recovery or Bootcamp (if Windows installed) then you need to perform more work.
    Create a data recovery/undelete external boot drive
    To get a copy of your files off the drive.
    Step by Step to fix your Mac
    To fix your machine and find out (hardware test) if it's a hardware issue of some sort.

  • What does "Only DRM free/unprotected" mean when trying to transfer pictures and videos to my laptop?

    What does "Only DRM free/unprotected" mean when trying to transfer pictures and videos to my laptop?

    Only Digital Rights Management music and video which you do not own rights to copy or use cannot be placed on your device.
    songs you have paid for or own outright will not have those restrictions.
    hope that helped?
    Good Luck

  • What does "[C", "[B" "[J" classnames mean in

    Hi,
    I ran the jrcmd tool to get some memroy diagnostics and "[c" class name occupies the most.
    --------- Detailed Heap Statistics: ---------
                          51.5%     98k      890    +98k[b] [C[/b]
    15.3% 29k 21 +29k[b] [B[/b]
    8.2% 15k 672 +15k java/lang/String
    3.9% 7k 1 +7k [S
    2.2% 4k 178 +4k java/util/HashMap$Entry
    2.0% 3k 84 +3k [Ljava/util/HashMap$Entry
    Here is the reference, see memory leak tool
    http://dev2dev.bea.com/pub/a/2004/04/jrockit142_hirt.html
    What does "[C", "[B" "[J" classnames mean in Detailed Heap Statistics? How can I find them in my code ?                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                           

    Generally speaking, the allocation traces from JRMC would show where objects are allocated. However, objects such as String, char[], byte[] etc are so ubiquitous that they are very hard to trace.
    Your best bet could be to focus on application specific packages and look for unusual object counts.
    Regards,
    /Raj

  • What does "into corresponding field" addition used for?

    What does "into corresponding field" addition used for?. I have seen them in open sql statements. Please explain?

    before knowing this you have to know how u write select in ABAP....
    think you have a str./internal table itab with this strucutre:
    data: begin of itab occurs 0,
             vbeln like vbak-vbeln,
             posnr like vbap-posnr,
             netwrt like vbap-netwrt,
           end of itab.
    u have to follow the same order in the select statement...
    select vbeln posnr netwrt
    from vbap
    into table itab
    where......
    Think that u had some concern and coudnt write a select in same order then u write it like this...
    Performance wise its very bad...so ppl generally try to eliminate it..
    select  netwrt posnr vbeln 
    from vbap
    into corresponding field of table itab
    where......
    Award points if helpful

  • On my iPad I have a working icloud that I have complete access to, but on my iPhone it keeps asking me for the password for it, but I do not know it! And the email that I used is not activated anymore! How do I delete the icloud account on my phone?

    On my iPad I have a working icloud that I have complete access to, but on my iPhone it keeps asking me for the password for it, but I do not know it! And the email that I used is not activated anymore! How do I delete the icloud account on my phone?

    Hi Aurion23,
    If you intend to keep using iCloud on your iPad, your best course of action would be to update your Apple ID/iCloud information so that you have a known password and it is associated with an active email address. You may find the following articles helpful:
    iCloud: Change your iCloud password
    http://support.apple.com/kb/ph2617
    Apple ID: Changing your Apple ID
    http://support.apple.com/kb/ht5621
    Regards,
    - Brenden

  • What does error code 150:30 mean and why can i not access my elements site

    what does error code 150:30 mean I cannot access my element equipment

    ok then so what is the problem I have with this error code

  • HT201210 what does 'firmware is not compatible' mean? What do I do to solve it?

    what does 'firmware is not compatible' mean? What do I do to solve it?

    Exactly what it says.
    How are you trying to update the device, step by step?

  • HT1338 What does a medium write error mean, when trying to burn a cd?

    What does a medium write error mean, when trying to burn a cd?

    nwalls wrote:
    What does a medium write error mean, when trying to burn a cd?
    It's an error message returned by the burner. You can see the full list of these error messages here
    <http://en.wikipedia.org/wiki/Key_Code_Qualifier>
    It's not specific enough to pinpoint what caused it—it could be anything from a bad optical medium (CD-R) to a dusty or dying laser diode. You have to isolate the problem—use a different CD-R brand, try a different speed, use a different burn engine (eg, Burn), etc. If it occurs once or twice, randomly, it's more likely to be a bad disc. If it occurs consistently, and at the same stage of the burn process, it's more likely to be a drive or software issue.

Maybe you are looking for

  • File Receiver Adapter:Can't write a large xml file completely

    Hi Folks I am doing an IDOC - Xi - FILE scenario where i am writing the xml file as it is onto XI directory. The problem i m facing is - the adapter does not write complete file. If i check from AL11 the file i am getting is not exceeding length 660.

  • Gamers Club unlocked extension?

    I still have not recieved my $30 coupon to extend my Gamers club membership.  Has anybody gotten it ye?.  Nothing in the mail or email (i checked my spam too).

  • How to remove background image per action

    Hi! I just created a wonderful action, but there's still one step I can't get working. I am optimzing scanned PDFs. First step: Preflight: Convert to greyscale. Second step: Optimize PDF: All filters set to high. This separates the background of the

  • Message from loaded movie

    I have loaded a movie (test.swf) into movieClip: var ldr:Loader = new Loader(); ldr.load(new URLRequest("test.swf")); addChild(ldr); The code above is in the movieClip. Now I would like to "send" a message from the loaded movie to the main timeline o

  • Final Cut x can't find my events or projects

    Final Cut x can't find my events or projects. I've tried removing the events and projects and put them back into the right folders again but when I start up Final Cut X, the screen looks like a new installed application. Only "New Event" is on the li