What does reply with message mean?

In the Passcode Lock section of Settings, you can decide what you can access when the iPod is locked, and I was wondering what "Reply with Message" is?

The iBook nor the online manual even mentions this setting.
This is the setting I'm referring to

Similar Messages

What does this error message mean? disc recording not found

What does this error message mean? disc recording not found

Often it suggests issues with device filters in your registry. But it's probably best to check the situation more closely.
Could you post your diagnostics for us please?
In iTunes, go "Help > Run Diagnostics". Uncheck the boxes other than DVD/CD tests, as per the following screenshot:
... and click "Next".
When you get through to the final screen:
... click the "Copy to Clipboard" button and paste the diagnostics into a reply here.

What does this Bridge message mean?

I have a new Mac (and Photoshop Elements 11) and when I open Bridge I get this message:
OLSException in OLS Adapter Startup
/OLS/development/main/bridge/3.2.0/build/mac/../../sdk/src/COLS.cpp#19 : 16
Should I be worried?
(I've tried using PSE Organizer and I hate it. I'd rather stick with Bridge unless I'm headed for trouble.)
What does this Bridge message mean?

Bridge came with an earlier version of PSE, PSE6 I think. The Organizer comes with PSE 9 and PSE11. Like some other PSE users, I much prefer Bridge to the Organizer. I had no trouble using Bridge with PSE9 and an older Mac. But with PSE11 and my new Mac, I started getting this message. I wonder if anyone knows what this message means, if it portends trouble for me, if there is anything I should do to correct it?
I posted this question on the Elements Forum and was told that it should be addressed on the Bridge Forum.

HT3529 what does 2127 error message mean?

what does 2127 error message mean when trying to send a text??

"...usually the 2127 invalid destination indicates that you should check your number and try again. It could be if number sending to has text blocked, a network issue, or not sending to a full 10 digit phone number...if you are sending text to a contact in your phone make sure contact saved has all 10 digits with area code save and also in contact make sure saved as a mobile number and not a home number..."

What does this error message mean: "Filename: Mips32.ari TFTP Error: 'File not found' in AP-105"?

Question: What does this error message mean: "Filename: Mips32.ari TFTP Error: ‘File not found’ in AP-105"?
Product and Software: This article applies to AP-105.
The root cause of this error is that the AP cannot perform a code upgrade.
Scenario 1
Check the ArubaOS code.
The minimum requirement to bring up an AP-105 is ArubaOS 3.3.3+ or ArubaOS 3.4.1+.
If the controller is running pre 3.3.3 code, upgrade the code to fix the issue.
Scenario 2
If the AP is not connected to the controller directly, bring up the AP in the controller and then connect it to the desired location. This process loads mips32.ari to the AP so that the AP can upgrade the code.
Scenario 3
The AP has no power adapter and you want to use the PoE feature. A few controller series like the 200 and 3000 Series do not support PoE. In this case, the AP cannot be terminated physically in the controller. Instead, connect the AP to the PoE switch, which is connected to the controller. Then assign a static IP configuration for the AP using the following commands:
apboot> setenv ipaddr <ip address>
apboot> setenv netmask <netmask>
apboot> setenv gatewayip <ip address of the gateway>
apboot> setenv master <ip address of the master>
apboot> setenv serverip <ip address of the TFTP server>
apboot> setenv bootcmd tftp
apboot> save
apboot> boot
Locally configure the TFTP server for the AP and load the mips32.ari file from the controller with the help of the TFTP application.

I want to download this file Mips32.ari for AP-105 device. Please give me this file download link. APBoot 1.2.4.4 (build 26618)
Built: 2011-01-07 at 13:42:04Model: AP-10x
CPU: AR7161 revision: A2
Clock: 680 MHz, DDR clock: 340 MHz, Bus clock: 170 MHz
DRAM: 128 MB
POST1: passed
Copy: done
Flash: 16 MB
PCI: scanning bus 0 ...
dev fn venID devID class rev MBAR0 MBAR1 MBAR2 MBAR3
00 00 168c 0029 00002 01 10000000 00000000 00000000 00000000
01 00 168c 0029 00002 01 10010000 00000000 00000000 00000000
Net: eth0
Radio: ar922x#0, ar922x#1Hit <Enter> to stop autoboot: 0
Checking image @ 0xbf100000
Invalid image format version: 0xffffffff
Checking image @ 0xbf800000
Invalid image format version: 0xffffffff
eth0 up: 1 Gb/s full duplex
DHCP broadcast 1
DHCP IP address: 192.168.x.xx
DHCP subnet mask: 255.255.255.0
DHCP def gateway: 192.168.x.xx
DHCP DNS server: 192.168.x.xx
DHCP DNS domain: xx
ADP multicast 1
ADP broadcast 1
ADP multicast 2
checksum bad
ADP broadcast 2
checksum bad
ADP multicast 3
checksum bad
checksum bad
checksum badRetry count exceeded
DNS request 1 for aruba-master to 192.168.x.xx
checksum bad
checksum bad
checksum bad
T Using eth0 device
TFTP from server 192.168.x.xx; our IP address is 192.168.x.xx
Filename 'mips32.ari'.
Load address: 0x2000000
Loading: checksum bad
T T checksum bad
T checksum bad
checksum bad
checksum bad
T checksum bad
checksum bad
T T checksum bad
T checksum bad
checksum bad
T T T
Retry count exceeded; starting again
eth0 up: 1 Gb/s full duplex
checksum bad
checksum bad
checksum bad
checksum bad
checksum bad
checksum bad
checksum bad
checksum bad
checksum bad
checksum bad
checksum bad
checksum bad
checksum bad
checksum bad
checksum bad
checksum bad
checksum bad
checksum badARP Retry count exceeded; starting again
eth0 up: 1 Gb/s full duplexchecksum bad
checksum bad
checksum bad
checksum bad
checksum bad
checksum bad
checksum bad
checksum bad ThanKs :)

What does this error message mean and how do I solve it? "Sorry, one or more of the following command-line tools was not found: /usr/bin/lsbom, /bin/pax, /bin/mkdir, /bin/chmod, or /usr/bin/update_prebinding."

When I try to open up this program, Pacifist, I receive this error message. Here's a screenshot. http://i.imgur.com/v717w.jpg What does this error message mean and how do I solve it?

It sounds like some of the Unix Executable commands were removed (or the permissions to those were modified) out of the /usr/bin/ folder. You can try opening disk utility and repairing permissions on Macintosh HD or you can reboot your computer and holding down option-r when it comes back up to reinstall Lion again. This will not delete your personal information or applications you have installed but it would be best to back it up to Time Machine before you do. The article on how to do this is here. (http://www.apple.com/macosx/recovery/) I have had to do this before and it works like a charm. It should fix your issue but grab a cup of coffee because its going to take about 35 - 40 minutes depending on how fast your computer is.

TS1846 What does this error message mean?

What does this error message mean? I am trying to burn a project to DVD...
Formatting was not successful. Layer 0 exceeds the maximum layer size allowed. Please choose a suitable marker location that will support this condition.

The project is 1:22:30 - 1080P HD (4.9GB)...I am using the share drop down and hitting DVD...I am using a DVD+R Dual Layer 8.5GB...It processes for about an hour and a half the status bar gets almost done and then the error message comes up...thanks for any help you can give me

TS1702 0xE8000004-what does this error message mean?

0xE8000004-what does this error message mean? I get it when trying to sync my Garmin USA app.

See http://support.apple.com/kb/TS3221.

What does this error message mean? MFMessageErrorDomain error 1028.

What does this error message mean?
MFMessageErrorDomain error 1028.
I can't seem to delete a message from my mailbox. The above error message comes up every time and the message then reappears in my inbox.

Back up all data. Rebuild the mailbox. Try to delete the message again. If you still can't, continue.
From the Mail menu bar, select
Mail > Preferences > Accounts > Advanced
From the menu labeled
Keep copies of messages for offline viewing
choose
Don't keep copies of any messages
Close the window and save the change. Relaunch Mail and test.

What does this error message mean? "Systemflippers"

SystemFlippers: didn't consume all data for DLOG ID 2002 (pBase = 0x858200, p = 0x85828c, pEnd = 0x85870e)
I'm using old fashioned resources with DLOG and DITL, etc... but DLOG 2002 exists, so... I'm not sure what's up.
ETA: After re-saving the resource file n times it didn't help. Re-saving the n+1th time, made the error go away.
MAGIC!
I'd still like to know what it was if anyone knows, for the next time it comes up.
Message was edited by: Brian Postow

Please point me to anything that google got that gave the answer? My google-fu is weak but not THAT weak.
Ok, so "systemflippers" is a endianness thing in, where? the compiler? run-time? resource manager? and what does the error mean? Just knowing what systemflippers does (I sort of figured it was something like that) doesn't tell me what the error means.

What does PL error message mean and awdd?

I got a PL message signifying something crashed along with awdd, what does this mean?

I do not think so. It is not that unusual for apps to crash occasionally.
If it happens a lot:
Apps crashing
See:
iOS: Troubleshooting applications purchased from the App Store
Contact the developer/go to their support site if only one app.
Restore from backup. See:
iOS: How to back up
Restore to factory settings/new iPod

What does this error message mean? "An unexpected error occurred (error code -6584). It arises when I open my Time Capsule icon.

I had a problem when downloading iTunes 11.1 and had to clear my disc and rebuild it from Time Capsule. Thats when I learned that Time Capsule stopped backing up back in January. So now I keep looking to see if Time Capsule is backing up but whenever I open the Time Capsule icon i get this error message. What does it mean and how can I fix the problem?

The backup is corrupted in some way.. you need to verify it.
The error is common enough but there seems to be a range of solutions.
Read the thread here.. https://discussions.apple.com/thread/3123920?tstart=0
Look particularly for the posts by Pondini.
And check his troubleshooting for methods of doing things like verify.
http://pondini.org/TM/Troubleshooting.html
A5

Help! what does battery with ! mean?

I connect my ipod mini to the computer and the battery with the '!' mark shows up and nothing happens. I read a link someone sent in response to the same question and it still did not answer my question.
I use the same cable and connect another iPod, a nano, and it works perfectly...same computer, same cable...just when my mini is connected...the battery with '!' symbol.
What does this mean? Can anyone help me?

Did you try these?
The Five Rs.Your Windows PC doesn't recognize iPod.
Your Windows PC doesn't recognize iPod.
iPod battery doesn't charge.
When restoring the iPod, it's often useful to put it into disk mode first.
Putting iPod into disk mode
What is this "fire stuff" that you refer to?

MacBook Woke Up By Itself - What does this error message mean?

My MacBook woke itself up today. First time this has happened to me. I can see from the Console Log that it's due to a USB disconnect, but I can't see anything that's disconnected. Everything appears to be working, so I'm not sure what's up. Here's the log snippet. Can someone tell me what the error codes mean?
6/4/10 1:18:00 PM kernel Wake reason = UHC4 EHC2
6/4/10 1:18:00 PM kernel System Wake
6/4/10 1:18:00 PM kernel Previous Sleep Cause: 5
6/4/10 1:18:00 PM kernel USB (EHCI):Port 1 on bus 0xfa connected or disconnected: portSC(0x101803)
6/4/10 1:18:00 PM kernel An Unknown USB Device (Port 1 of Hub at 0xfa000000), may have caused a wake by being connected
6/4/10 1:18:00 PM kernel The USB device IOUSBWirelessControllerDevice (Port 1 of Hub at 0x1a000000) may have caused a wake by being disconnected
What does Wake reason = UHC4 EHC2 mean? I can't find a meaning for UHC4 and EHC2 online.
Also, Based on the description "IOUSBWirelessControllerDevice" sounds like it would have something to do with the wifi on my MacBook, but that appears to be fine. Any ideas on what hub 0xfa is? Is that an internal USB connection? Any ideas where "Port 1 of Hub at 0x1a000000" is located?
Thanks again

6/4/10 1:18:00 PM kernel An Unknown USB Device (Port 1 of Hub at 0xfa000000), may have caused a wake by being connected
6/4/10 1:18:00 PM kernel The USB device IOUSBWirelessControllerDevice (Port 1 of Hub at 0x1a000000) may have caused a wake by being disconnected
This is the part that matters.
Unfortunately, a number of the MacBook's internal components (keyboard, iSight, USB ports themselves) are on the same USB bus. This means if any one of these components is disturbed somehow, the machine may wake from sleep. As far as I know, there is no easy way to figure out which specific device woke the machine.
Be sure to disconnect all external devices, and try turning off Bluetooth, to see if the computer continues to wake from sleep.
~Lyssa

What does sync with Foxfire mean?

What does Foxfire Sync mean? Can I use my Yahoo email account?

'''Firefox Sync''' is a browser synchronizer "system" which allows users to keep their Firefox web browser configured in the same way on different computers, devices, and operating systems. For instance, if a user adds a bookmark while being at home, the bookmark will be available the day after at office; along with many other types of personal data.
See this: <br />https://support.mozilla.org/en-US/kb/firefox-sync-take-your-bookmarks-and-tabs-with-you
'''Can I use my Yahoo email account? ''' <br />
Yes, you can use your Yahoo email account username for your username / email address when you setup Sync.

What does reply with message mean?

Similar Messages

Maybe you are looking for