What ESB adapter can pass a message from JMS service to outside service?

1. we are running ESB from SOA 10.1.3.1 on linux
2. we have XML message passed to JMS deployed at the local OC4J
3. we need this XML message passed to an outside service.
What will be the adapter to use as outbound from JMS?
TIA

What is this outside service, if it is a web service then you can use SOAP adapter. just put in the WSDL and away you go.
Use the JMS adapter for reading the queue and the SOAP adapter for writing to outside service.
cheers
James

Similar Messages

  • Receive asynchronous message from JMS  topic over web service

    Hi,
    I have a JMS topic and I want to expose it as a web service so that clients can
    make durable subcription to the topic and receive messages asynchronously. What
    is the best way of doing this ? Is there a portable (to other containers) way
    of do this ? If not, is there a web logic specific way of doing this ?
    Thanks,
    Siva

    So you expect clients to be receiving SOAP messages over HTTP? In this
    case, the clients are really servers that are capable of servicing SOAP
    requests, correct? And how about the senders: are they also using
    SOAP/HTTP to send messages that are delivered to the receivers?
    It should be possible to write this yourself using JMS not as the
    transport, but as a mechanism for distributing the message to a set of
    clients. You'll need to implement a Web Service for publishing to a
    topic, an operation for registering an end point to recieve messages,
    and an MDB (or other form of JMS subscriber) executing on the server to
    relay the message to the end point.
    Siva wrote:
    Hi,
    I have a JMS topic and I want to expose it as a web service so that clients can
    make durable subcription to the topic and receive messages asynchronously. What
    is the best way of doing this ? Is there a portable (to other containers) way
    of do this ? If not, is there a web logic specific way of doing this ?
    Thanks,
    Siva

  • How to Read Message from JMS Queue using Business Service(ALSB3.0)

    Hi,
     My Project Set up is as follows(using ALSB3.0).
    1>One Proxy Service with transport as HTTP.
    2>The Proxy service is calling another Business Service.
    3>The Business Service has transport layer as JMS.
    So here the business service is posting Request Message into the JMS queue.
    I want at the same time it(The Business Service) should listen to another queue and from there it should read Response Message and forward back to the caller proxy service.
    Can any one help me regarding this...
    Thanks in advance...
    Deba

    Hi ,
    Problem in : Reading / writing messages to the JMS Queue -
    I am stuck with the same problem and I am not able to proceed futher, Can you please help me out in sending an example of how to do right configurations in ALSB and on the server. I read the documentation but still I dont see messages in the queues.
    please help me out. can you post a small sample example
    thanks
    adi

  • Hi, my iPhone was stolen and now i can't receive messages from people with iPhones. What do i do to fix this problem, and get my old messages? This has been a problem for 3 weeks!

    Hi, my iPhone was stolen and now i can't receive messages from people with iPhones. What do i do to fix this problem, and get my old messages? This has been a problem for 3 weeks!

    This won't get your old messages back but will help with new ones: https://selfsolve.apple.com/deregister-imessage

  • Is there a way to tell what is actually being passed to DB from PreparedSta

    Is there a way to tell what is actually being passed to DB from PreparedStatement? What I mean by that is that I have a PreparedStatement that is a simple
    prepstmt = connection.prepareStatement("Insert into table (col1, col2, col3, .... colx) values (?,?,?....?)");
    (there are x ?s)
    I precompile this, and later, when there is a connection I call set all the variables
    prepstmt.setInt(1, someint); prepstmt.setString(2, "\\'" + somestring + "\\'"); etc... prepstmt.executeUpdate();
    I get back an exception thrown by Oracle complaining that one of my values is too large for the column (but doesn't say what column/value).
    So I made a string that contains what ought to be the same query
    String debug = "Insert into table (col1, col2, col3, .... colx) values (someint,'somestring',etc....someotherint)"; System.out.println(debug);
    I give the printed out line directly to Oracle through SQLScratchpad and it works just fine in there and I can confirm the row has been inserted. Nothing is too big.
    Is there a way to look at what the PreparedStatement actually has as values in there? I found I could look at the original statement (the one with the ?s) if I expand the prepstmt object in the debugger's (Eclipse) view, but nothing to show me where the values were filled in.
    Thanks for any help you can give me.

    Hrm, I'm suspecting that perhaps it has to do something with setting CHAR fields. Some of the fields in this table are CHAR but I don't see a call in my PreparedStatement that can set a char, only a String, so that's what I've been using, but it may be that that's not the right thing to do. I'm running Java 1.5.10, and looking through the API there doesn't seem to be anything specifically for char.

  • How to read Java Object message from JMS Queue using JMS Adapter .

    Dear All,
    In my scenario i have to read a java object message from JMS Queue . I tried by using the JMS Adaper ,but i am not getting any Payload . Can any one tell me is there any special settings for JMS Adapter to read the Java Object message .
    I am able to read the Message successfully thru JMS Adapter but in SXMB_MONI it is not showing any payload .
    I also went in Message monitoring but i am getting this type of message in Sender JMS Adapter  in Audit Log.
    JMS Message ID XXXXX Message Type Null unknown.Payload can not be read and will be empty.
    JMS Message ID XXXXX Payload Empty can not read.
    Please Help.
    Lateef

    Hi,
    As far as i know, JMS Object Messages is not supported by XI JMS adapter.
    you need to have the JMS provider to transform the message to bytes messages.
    (Refer to SAP note 856346)

  • I am passing range table from the method of ODATA Service to FM but In FM range table is becoming initial.What would be the reason for the same?

    I am passing range table from the method of ODATA Service to FM but In FM range table is becoming initial.What would be the reason for the same?

    Vinod, Can you share detail on how are you sending and how are you reading.

  • Can I receive messages from Skype when my ipad is in sleep mode and the app is closed?

    Ok, can I receive messages from Skype when my ipad and iPod touch are off, and the app is closed? Becuase my mom sent me a message and I did nott receive it. I have to have the app running or running in the background to receive messages. Is there a way to recieve messages when my ipad and ipod do NOT have the app running?

    The ipad may keep a connection alive in sleep mode.. but it should only use local connection AFAIK, and no internet content.
    I have a similar setup with iPad and although it has an IP it is not actually reachable on the network. I will track usage and see if it is actually using anything but I would doubt it.
    Now of course it may depend on what apps you have running. I really doubt the ipad will be using that much of your download unless you are watching movies on it.

  • How can i link my E-mail with my iPad in a way that i can delete my messages from my email inbox server not from my iPad inbox only?

    How can i link my E-mail with my iPad in a way that i can delete my messages from my email inbox server also not from my iPad inbox only?
    Because when i delete emails from my iPad inbox, it will be deleted on my iPad only but when i check my email inbox server from the browser its not deleted!
    So how can i set up this link so when i delete any email from my iPad it will be deleted from my email inbox server also?

    Hi Pierrot10,
    Insert your backup disc (or plug your external hd), then open Mail.
    In the File menu, click *Import Mailboxes* and follow the steps for a *Mail for Mac OS X* transfer.
    Navigate to your CD/DVD's or external HD's backup and hit "OK".
    This should create a new "Imported" folder in Mail with all your old messages in it, that you can then rearrange as you wish, creating new mailboxes etc.
    Axel

  • Jms adapter not polling messages from jms topic

    Hi
    We have a jms adapter configured in BPEL process which need to poll messages from JMS topic.Unfortunately its not polling message from JMS Topic if we add Message Selector and Durable Subscriber properties in jca file.Please find jca file content below
    <adapter-config name="SyncCustomerPartyListCDHJMSConsumer" adapter="JMS Adapter" wsdlLocation="oramds:/apps/AIAMetaData/AIAComponents/ApplicationConnectorServiceLibrary/CDH/V1/ProviderABCS/SyncCustomerPartyListCDHProvABCSImpl.wsdl" xmlns="http://platform.integration.oracle/blocks/adapter/fw/metadata">
      <connection-factory location="eis/jms/aia/syncCustomerParty_cf" UIJmsProvider="WLSJMS" UIConnectionName="Dev"/>
      <endpoint-activation portType="Consume_Message_ptt" operation="Consume_Message">
        <activation-spec className="oracle.tip.adapter.jms.inbound.JmsConsumeActivationSpec">
          <!--property name="DurableSubscriber" value="XYZ"/-->
          <property name="PayloadType" value="TextMessage"/>
          <!--property name="MessageSelector" value="Target in ('XYZ')"/-->
          <property name="UseMessageListener" value="true"/>
          <property name="DestinationName" value="jms/aia/Topic.jms.COMMON.CustomerParty.PUBLISH"/>
        </activation-spec>
      </endpoint-activation>
    </adapter-config>
    If we remove Durable subscriber and message selector properties,its able to poll messages.
    Any pointer will help
    thanks in advance
    Baji

    After changing below property in jca file.JMS adapter is able to poll messages from JMS Topic.
    <property name="UseMessageListener" value="false"/>
    But if i un comment below line and deploy my code again, it stop pulling the messages from topic.
    <property name="DurableSubscriber" value="XYZ"/>
    If i bounce the server after above change and deployment ,it will start polling the message.I am not sure why i need to restart my server after adding above property.
    Thanks
    Baji

  • CAN I RECEIVE MESSAGE FROM MY CELLULAR SERVICE PROVIDER IN MY iPAD MINI CELLULAR ?

    Hi Using iPad,
    Can I receive message from my cellular service provider in my iPad mini cellular?

    I Picked This Username wrote:
    Be aware though..
    If you send an iMessage to an iPhone that isn't using WiFi, they will be charged for receiving the message..
    The same goes with the iPad sending the message: if you are not using WiFi..
    That is incorrect. No cell carrier charges for a message sent by and received by iMessage other than any relevant data charges. The carrier doesn't even know the message is any different from an email message or any other standard Internet traffic. Only if the iPhone was not set up to iMessage and hence receives the message via SMS would there perhaps be a charge, and that will depend on the cell plan. The iPad cannot receive messages via SMS at all so there will never be a charge.
    Regards.

  • How can I show message from server?

    Has anyone idea, how can I show message from server? I want to show message after some files are uploaded via FTP.

    Hi,
    You can use OPEN DATASET for this purpose.
    Try this code:
    <b>****************************************</b>
    Data:
    A_FILE TYPE RLGRAP-FILENAME,   "Application server
    P_FILE TYPE RLGRAP-FILENAME.   "Presentation server
    DATA: BEGIN OF ITAB OCCURS 0,
    LINE TYPE STRING,
    END OF ITAB.
    DATA: FILENAME TYPE STRING.
    FILENAME = P_FILE.
    CALL FUNCTION 'GUI_UPLOAD'
      EXPORTING
        FILENAME                = FILENAME
      TABLES
        DATA_TAB                = ITAB[]
      EXCEPTIONS
        FILE_OPEN_ERROR         = 1
        FILE_READ_ERROR         = 2
        NO_BATCH                = 3
        GUI_REFUSE_FILETRANSFER = 4
        INVALID_TYPE            = 5
        NO_AUTHORITY            = 6
        UNKNOWN_ERROR           = 7
        BAD_DATA_FORMAT         = 8
        HEADER_NOT_ALLOWED      = 9
        SEPARATOR_NOT_ALLOWED   = 10
        HEADER_TOO_LONG         = 11
        UNKNOWN_DP_ERROR        = 12
        ACCESS_DENIED           = 13
        DP_OUT_OF_MEMORY        = 14
        DISK_FULL               = 15
        DP_TIMEOUT              = 16
        OTHERS                  = 17.
    IF SY-SUBRC <> 0.
      MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
              WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    OPEN DATASET A_FILE FOR OUTPUT IN TEXT MODE ENCODING DEFAULT.
    LOOP AT ITAB.
      TRANSFER ITAB-LINE TO A_FILE.
    ENDLOOP.
    <b>*****************************************</b>
    Hope this helps,
    Regards,
    Pragya

  • How can i  remove messages from faces context

    hi
    how can i remove messages from faces context
    with regards
    shannu sarma

    I'm also looking to find a way to remove message/s from FacesContext, and so far I've not been able to do this.
    The issues described below (if you have the patience to understand it) may uncover some JSF issues when combining different functionalities in JSF to come up with a solution.
    I have a requirement to display (let's just say error) messages in a message board. I do this in 2 steps: field-level validations are done first, and if all corrected (by the user), I do multi-field-level as well as business logic validation after model update (the way JSF seems to be designed to handle different types of validations). Let's say I have a combination of 3 combo-boxes that are dependent on one another. Selection from (1) requires dynamically filtering and setting a list for two and that in turn requires dynamically filtering and setting a list for 3, so the first two have valueChangeListener (try doing this in JSF!!!, I had to hack my way through to set this up with JSF, but that is not the issue). I have business rules associated with items within combo (1) and other entry fields entered by users (i.e. for simplicity let's just say, if material 'chain' is selected from combo 1, I should set combo (2) and (3), and validate that user entered at least four in # used entry field). Let's say I have a table with many rows of above combination of combo-boxes specified. Again for simplicity, assume we only have business rule violations (not field-level that would not go through model update):
    * User selects many combination of entried before submit (with no field-level error)
    * Business rules are checked and messages added to FacesContext and displayed in a message board
    * Next, all these messages disappear from the view when selecting any item from any combo-box (with valueChangeListeners attached to them) - 2 reasons: 1. a new FacesContext is created per valueChangeEvent 2. Business model update does not happen (so we don't generate these messages again and add them to FacesContext, it is not efficient to do so anyways)
    * we would like to display all those business logic validation messages so the user could correct them all (and not lose them by any combo-box selection)
    * As a workaround, I add these messages to session (which is another issue, since FacesMessages are not serializable) at the end of business logic validation, and retrieve and display them by (a.) forcing combo-boxes go through (field-level) validation, (b.) adding a new hidden field at the end of all fields in JSP page with a custom-validator that all it does is to get messages saved to session (from the last business logic validation) and add them to the FacesContext - this ensures that messages are not lost due to combo-box selections
    * The problem is that when user submits (to validate the business rules again), since the old Business validations messages are added to FacesContext at the end of field-level validation, I need to clear them, before adding the newly generated messages
    * But....I can't remove messages from FacesContext
    So here's a reason for this 'needed' functionality, based on whatever is available (as of JSF 1.1.01). Is there a better way to this, I'll be delighted to hear it (as I have tried different solutions myself with above combination of issuses), and have wasted some time trying to work-around the issues I've faced using JSF (in every one of those ways I've tried) ....part of which is described here...
    Thanks...

  • Got a new Samsung galaxy s3 and can't get messages from iphone users now. Don't have the old iphone to change the settings ! please help . need to know how I can get messages on my galaxy

    Can't get messages from iphone users on my new Samsung g allaxy and don't have my old iphone anymore ! Please help !

    Read here under no longer have device:
    http://support.apple.com/kb/ht5661
    Be aware, changing your Apple ID password doesn't always work, & can take up to 45 days to work.
    It's either that, or you call AppleCare & have them fix.

  • How can i extract messages from icloud backup in apple 4

    how can i extract watsapp messages from icloud backup in apple 4

    When you backup messages in iCloud, your SMS will be stored in Network. As i know, you cannot view the SMS. But you can try to sync to your iPhone or backup in iTunes. After that, you can extract your messages from iTunes with iPhone backup Extractor apps.

Maybe you are looking for