What files to modify for the settings of Safari Prefs using plist editor ?

I'm running into a situation that the default "Save downloaded files to"
for some unknown reason has been changed to the hard disk top level of Desktop which caused all users can't download (permission error). I knew this can
be fixed by the logged user by going to Safari's General Preference and change
to the desired location. However, I need to use the "Property List Editor"
to modify the preferences file(s) for all users ! as I have a customized
/System/Library/User\ Template/English.lproj which contains a Safari folder
under /System/Library/user\ template/English.lproj/Library. There is file called "Downloads.plist" under the Safari folder, I examined this file using
"Property List Editor", it contains the following two lines:
<key>DownloadEntryPath</key>
<string>~/Desktop/fdmacosx.sit</string>
I am not sure if the above two entries are for the "Save downloaded files to"
setting in Safari GUI Preferences setting. If they are, then they should point
to the logged user's home directory's Desktop (Not points to the drive top level)which should be correct. BUT all subsequent created users STILL point to the drive top level Desktop (with Red stop sign in the icon)in Safari's Preferences.
I also looked in the /System/Library/user\ template/English.lproj/Library/Preferences/com.apple.Safari.plist, nothing related to the "Save downloaded files to".
Where to look for the Preferences file(s) for this setting ?
DC

Found nothing related to the "Save downloaded files to" preferences setting
in ~/Library/Preferences/com.apple.Safari.plist. what is the entry in
~/Library/Preferences/com.apple.Safari.plist ? Should not be in the logged user
Preferences file, I'm looking for system wide plist file.
-DC

Similar Messages

  • What file name is for the driver of gpib-usb-b?and how to add the driver file to vb in win2000??thanks

    what file name is for the driver of gpib-usb-b?and how to add the driver file to vb in win2000??thanks

    Hi,
    Multiple files are required for the proer fnctioning of any of our GPIB products. Unfortunatly the installation is not as simple as copying a single file over. If you wish to make the installer silent, i believe this is entirely possible in a fashion similar to the details given at http://digital.ni.com/public.nsf/websearch/0730A66245E6808086256CA8006E2183?OpenDocument.
    Hope this helps out!
    Best Regards,
    Aaron K.
    Application Engineer
    National Instruments

  • Create a counter for the rows in a table using script editor?

    Hi ,
    I want to add afield in a particular table  with first field is its serial number . How to use scripting editor to fill the serial number ?
    How to create a counter ?
    Edited by: Rajan.Dexter9 on Jan 30, 2012 9:40 PM

    Hello Rajan,
    Create a field in the table and name it as 'SERIAL'.  Create a variable called 'count' with default value as 0.  Now in script editor, for javascript language and calculate event, write the following script.
    var fields = xfa.layout.pageContent(xfa.layout.page(this)-1, "field", 0);
    for (var i=0; i <= fields.length-1; i++)
         if (fields.item(i).name == "SERIAL")
              count.value = count.value + 1;
                     this.rawValue = count.value;     

  • Problem with my program looking for the settings file in the wrong folder

    I have been writing a simple FTP file uploader, what I want to do is be able to select the files I want to upload in windows explorer and then right click and click the menu item and it launches the program and passes the files paths that I have selected to it.
    So I use this in the windows registry "C:\Program Files\Java\jre1.6.0_03\bin\java.exe -jar D:\BenFTP\BenFTP.jar %1"
    It launches fine and has no problem finding the files I want to upload. The problem is that it tries to look for the settings file in the same folder that the file I am try to upload is in. Which it's not suppose to do since the settings file is in the same folder that the .jar is in.
    Edited by: ColNewman on Feb 5, 2008 6:55 PM

    So, you're looking for your settings file in your current working directory. There's no way to set the CWD in your registry entry (is there?) so that isn't a practical thing to do. Presumably you're using a File object or a FileReader or something? Can't do that.
    One alternative is to look for the settings file in the classpath. You can get a URL to a file in the classpath like this:URL settings = this.getClass().getResource("/settings.xml");Or you can get an InputStream to read the file by using the getResourceAsStream method. You would have to make sure that your executable jar file contained a Class-Path entry that specified the right directory, because the directory the jar is contained in isn't automatically in an executable jar's classpath.
    Another alternative is to ask the user where the settings file is supposed to be, and put an entry in the Preferences (java.util.prefs) to remember that location.

  • TS3297 What do I do if music files purchased/downloaded for the iTunes store don't work properly?

    What do I do if music files purchased/downloaded for the iTunes store don't work properly?

    Buddhabeat...clicking on the "Report a Problem" button next to the song(s) in question, should open a drop-down list menu, that allows you to select the specific issue/area of concern that you are experiecing (or you can select a generic "My problem is not on the list" (or something to that effect). Underneath this drop-down menu box, there should be another message box where you can describe  the issue/problem your having. Below this message box will be a "Submit" button...clicking on that will send your message to the Apple iTunes Store Customer Support Centre (you will see a confirmation message that your message has been sent), as well as receive an email notification from the Support Centre confirming your message has been received, a case number, and that you will receive an email response pertaining to the issue/problem you're having, from the Support Centre asap (usually within 24 hours). That's how it worked for me, anyhow.

  • "XML File not found for the Container DataBindings.cpx" error after deploy

    Hello,
    I have a problem with my JSP-Javaproject. Local works all fine but when i deploy my project to a Oracle Aplication Server i allway get this XML-File-Not-found exception:
    oracle.jbo.NoXMLFileException: JBO-26001: XML File not found for the Container DataBindings.cpx
    In my EAR-File the DataBindings.cpx is at:
    \WEB-INF\classes\
    My JSP-File:
    <jbo:ApplicationModule id="AippackageModule" definition="DataBindings.DataModule" releasemode="Stateful" />
    My web.xml:
    <context-param>
    <param-name>CpxFileName</param-name>
    <param-value>DataBindings</param-value>
    </context-param>
    My DataBindings.cpx:
    <?xml version='1.0' encoding='windows-1252' ?>
    <Application xmlns="http://xmlns.oracle.com/adfm/application" id="DataBindings"
    Package="" ClientType="Generic">
    <pageMap>
    </pageMap>
    <pageDefinitionUsages>
    <page id="eonerrorPageDef"
    path="de.avacon.ahb.system.tools.pageDefs.eonerrorPageDef"/>
    </pageDefinitionUsages>
    <dataControlUsages>
    <BC4JDataControl Configuration="AppModuleLocal"
    Package="model.data"
    xmlns="http://xmlns.oracle.com/adfm/datacontrol"
    id="DataModule">
    <Parameters/>
    </BC4JDataControl>
    </dataControlUsages>
    </Application>
    What can i do?
    Thanks, steve

    Adding the dependency in the ViewController fixed this for me.
    I'm using two AppModules in the controller and the second one wasn't being picked up.
    I was able to fix this by:
    Go to the Project Properties, select Dependencies, edit the Dependent Projects and Archives, find the model that's failing and add a tick in the Build Output box.
    The model should now be picked up in the ViewController's DataBindings.cpx source file, though I did have to restart JDev for this to be picked up.
    HTH
    Phil

  • I have the latest Mac Air 13" and I have a Seagate 500MB external hard disk I cant copy or Cut any files on the hard disk and I cant even delete any files. I have the settings as Read and Write in the get info tab. Please help

    I have the latest Mac Air 13" and I have a Seagate 500MB external hard disk I cant copy or Cut any files on the hard disk and I cant even delete any files. I have the settings as Read and Write in the get info tab. Please helpand also note that my hard drive was formatted on a Windows 7 Laptop.

    thats the problem, its in MSDos (Fat) or NTFS for Windows.
    Options.....
    1. offload all that data on the HD onto your PC, THEN format the HD in EXFAT for use on BOTH PC and Mac for read/write.....then reload all (or as you need) that data back onto the HD
    2. get another HD, and format it for Mac OSX extended journaled.
    FAT32 (File Allocation Table)
    Read/Write FAT32 from both native Windows and native Mac OS X.
    Maximum file size: 4GB.
    Maximum volume size: 2TB
    You can use this format if you share the drive between Mac OS X and Windows computers and have no files larger than 4GB.
    NTFS (Windows NT File System)
    Read/Write NTFS from native Windows.
    Read only NTFS from native Mac OS X
    To Read/Write/Format NTFS from Mac OS X, here are some alternatives:
    For Mac OS X 10.4 or later (32 or 64-bit), install Paragon (approx $20) (Best Choice for Lion)
    Native NTFS support can be enabled in Snow Leopard and Lion, but is not advisable, due to instability.
    AirPort Extreme (802.11n) and Time Capsule do not support NTFS
    Maximum file size: 16 TB
    Maximum volume size: 256TB
    You can use this format if you routinely share a drive with multiple Windows systems.
    HFS+     ((((MAC FORMAT)))  (Hierarchical File System, a.k.a. Mac OS Extended (Journaled) Don't use case-sensitive)
    Read/Write HFS+ from native Mac OS X
    Required for Time Machine or Carbon Copy Cloner or SuperDuper! backups of Mac internal hard drive.
    To Read HFS+ (but not Write) from Windows, Install HFSExplorer
    Maximum file size: 8EiB
    Maximum volume size: 8EiB
    You can use this format if you only use the drive with Mac OS X, or use it for backups of your Mac OS X internal drive, or if you only share it with one Windows PC (with MacDrive installed on the PC)
    EXFAT (FAT64)    ------Can read/write from both PC and Mac
    Supported in Mac OS X only in 10.6.5 or later.
    Not all Windows versions support exFAT. 
    exFAT (Extended File Allocation Table)
    AirPort Extreme (802.11n) and Time Capsule do not support exFAT
    Maximum file size: 16 EiB
    Maximum volume size: 64 ZiB
    You can use this format if it is supported by all computers with which you intend to share the drive.  See "disadvantages" for details.

  • TS2756 iam using iphone 4S with win 7 PC and i cannot connect to the internet through my phone but i tried with my other 4S and it works but what should i do for the first iphone 4S???

    iam using iphone 4S with win 7 PC and i cannot connect to the internet through my phone but i tried with my other 4S and it works but what should i do for the first iphone 4S???
    as i said i have two iphone 4S,,,,,
    1st one --- has os 5.1
    2nd one has os 6.0
    i tried 2nd one with carrier reliance gsm nd it works with that personal hotspot setting using USB...
    but i want to connect the first 4S with carrier TATA DOCOMO GSM but its not working with the same USB feature????
    plz reply asap...!!!
    thnxxx in advance!!!

    If not this:
    iOS: Wi-Fi or Bluetooth settings grayed out or dim
    One user reported that placing the iPod in the freezer fixed the problem.
    Also heating sometimes works. See:
    Why can't I select my wifi settings?
    A trick that works frequently with iPhones:
    Settings > AirPlane Mode ON, Do Not Disturb ON
    Power down and wait 5-10 minutes
    Power up
    Settings > AirPlane Mode OFF, Do Not Disturb OFF
    If not successful, an appointment at the Genius Bar of an Apple store is usually in order.
    Apple Retail Store - Genius Bar
    Then:
    Does the iOS device connect to other networks? See other networks? If yes that tends to indicate a problem with your network.
    Does the iOS device see the network?
    Any error messages?
    Do other devices now connect?
    Did the iOS device connect before?
    Try the following to rule out a software problem:                
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on your router
    .- Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - Wi-Fi: Unable to connect to an 802.11n Wi-Fi network      
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar

  • HT4623 what can be done for the ipad that is making people dizzy and having headaches?

    what can be done for the ipad that is making people dizzy and having headaches?

    Go to settings>general>accessibility>reduce motion> turn on.

  • [svn:fx-trunk] 11585: Initial check-in of CoreTech' s pixel bender kernel files for the pixel bender filters we use to mimic AIM blendModes based on Vera 's ok.

    Revision: 11585
    Author:   [email protected]
    Date:     2009-11-09 13:39:53 -0800 (Mon, 09 Nov 2009)
    Log Message:
    Initial check-in of CoreTech's pixel bender kernel files for the pixel bender filters we use to mimic AIM blendModes based on Vera's ok. Added the standard Flex copyright headers to what Core Tech passed along.
    QE notes: None
    Doc notes: None
    Bugs: None
    Reviewer: Me
    Tests run: Checkintests
    Is noteworthy for integration: Yes, perhaps, to downstream teams that want to rebuild the pixel bender filters
    Added Paths:
        flex/sdk/trunk/frameworks/projects/spark/src/spark/primitives/supportClasses/shaders/Colo r.pbk
        flex/sdk/trunk/frameworks/projects/spark/src/spark/primitives/supportClasses/shaders/Colo rBurn.pbk
        flex/sdk/trunk/frameworks/projects/spark/src/spark/primitives/supportClasses/shaders/Colo rDodge.pbk
        flex/sdk/trunk/frameworks/projects/spark/src/spark/primitives/supportClasses/shaders/Excl usion.pbk
        flex/sdk/trunk/frameworks/projects/spark/src/spark/primitives/supportClasses/shaders/Hue. pbk
        flex/sdk/trunk/frameworks/projects/spark/src/spark/primitives/supportClasses/shaders/Lumi nosity.pbk
        flex/sdk/trunk/frameworks/projects/spark/src/spark/primitives/supportClasses/shaders/Lumi nosityMaskFilter.pbk
        flex/sdk/trunk/frameworks/projects/spark/src/spark/primitives/supportClasses/shaders/Satu ration.pbk
        flex/sdk/trunk/frameworks/projects/spark/src/spark/primitives/supportClasses/shaders/Soft Light.pbk

  • HT1212 my ipad got disable bcoz of entering wrong password for several time and i got the above method but what if i dont have the same computer which i used to sync my ipad

    my ipad got disable bcoz of entering wrong password for several time and i got the above method but what if i dont have the same computer which i used to sync my ipad

    How can I unlock my iPad if I forgot the passcode?
    http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
    iOS: Device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212
    How can I unlock my iPad if I forgot the passcode?
    http://tinyurl.com/7ndy8tb
    How to Reset a Forgotten Password for an iOS Device
    http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
    Using iPhone/iPad Recovery Mode
    http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
    Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
    ~~~~~~~~~~~~~
    ‘iPad is disabled’ fix without resetting using iTunes
    Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
    I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
    Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
    1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
    2. Open iTunes with the iPad disconnected.
    3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
    4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
    5. Click ‘Setup as new iPad’ and then click restore.
    6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
    7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
    8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
    If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
    ~~~~~~~~~~~~~
    Try it and good luck. You have nothing more to lose if it doesn't work for you.
     Cheers, Tom

  • What software is recommended for the maintenance of mac?

    What software is recommended for the maintenance of mac?

    How to maintain a Mac
    1. Make redundant backups, keeping at least one off site at all times. One backup is not enough. Don’t back up your backups; all should be made directly from the original data. Don’t rely completely on any single backup method, such as Time Machine. If you get an indication that a backup has failed, don't ignore it.
    2. Keep your software up to date. In the App Store or Software Update preference pane (depending on the OS version), you can configure automatic notifications of updates to OS X and other Mac App Store products. Some third-party applications from other sources have a similar feature, if you don’t mind letting them phone home. Otherwise you have to check yourself on a regular basis.
    Keeping up to date is especially important for complex software that modifies the operating system, such as device drivers. Before installing any Apple update, you must check that all such modifications that you use are compatible. Incompatibility with third-party software is by far the most common cause of trouble with system updates.
    3. Don't install crapware, such as “themes,” "haxies," “add-ons,” “toolbars,” “enhancers," “optimizers,” “accelerators,” "boosters," “extenders,” “cleaners,” "doctors," "tune-ups," “defragmenters,” “firewalls,” "barriers," “guardians,” “defenders,” “protectors,” most “plugins,” commercial "virus scanners,” "disk tools," or "utilities." With very few exceptions, such stuff is useless or worse than useless. Above all, avoid any software that purports to change the look and feel of the user interface.
    The more heavily promoted the product, the more likely it is to be garbage. The most extreme example is the “MacKeeper” scam.
    As a rule, the only software you should install is that which directly enables you to do the things you use a computer for, and doesn't change the way other software works.
    Safari extensions, and perhaps the equivalent for other web browsers, are a partial exception to the above rule. Most are safe, and they're easy to get rid of if they don't work. Some may cause the browser to crash or otherwise malfunction.  Some are malicious. Use with caution, and install only well-known extensions from relatively trustworthy sources, such as the Safari Extensions Gallery.
    Never install any third-party software unless you know how to uninstall it. Otherwise you may create problems that are very hard to solve.
    4. Beware of malware. Malware is malicious software that circulates on the Internet. This kind of attack on OS X used to be so rare that it was hardly a concern, but it's now increasingly common, and increasingly dangerous.
    There is some built-in protection against downloading malware, but you can’t rely on it — the attackers are always at least one day ahead of the defense. You can’t rely on third-party protection either. What you can rely on is common-sense awareness — not paranoia, which only makes you more vulnerable.
    Never install software from an untrustworthy or unknown source. If in doubt, do some research. Any website that prompts you to install a “codec” or “plugin” that comes from the same site, or an unknown site, is untrustworthy. Software with a corporate brand, such as Adobe Flash Player, must come directly from the developer's website. No intermediary is acceptable, and don’t trust links unless you know how to parse them. Any file that is automatically downloaded from the web, without your having requested it, should go straight into the Trash. A web page that tells you that your computer has a “virus,” or that anything else is wrong with it, is a scam.
    In OS X 10.7.5 or later, downloaded applications and Installer packages that have not been digitally signed by a developer registered with Apple are blocked from loading by default. The block can be overridden, but think carefully before you do so.
    Because of recurring security issues in Java, it’s best to disable it in your web browsers, if it’s installed. Few websites have Java content nowadays, so you won’t be missing much. This action is mandatory if you’re running any version of OS X older than 10.6.8 with the latest Java update. Note: Java has nothing to do with JavaScript, despite the similar names. Don't install Java unless you're sure you need it. Most people don't.
    5. Don't fill up your boot volume. A common mistake is adding more and more large files to your home folder until you start to get warnings that you're out of space, which may be followed in short order by a boot failure. This is more prone to happen on the newer Macs that come with an internal SSD instead of the traditional hard drive. The drive can be very nearly full before you become aware of the problem.
    While it's not true that you should or must keep any particular percentage of space free, you should monitor your storage use and make sure you're not in immediate danger of using it up. According to Apple documentation, you need at least 9 GB of free space on the startup volume for normal operation.
    If storage space is running low, use a tool such as OmniDiskSweeper to explore the volume and find out what's taking up the most space. Move seldom-used large files to secondary storage.
    6. Relax, don’t do it. Besides the above, no routine maintenance is necessary or beneficial for the vast majority of users; specifically not “cleaning caches,” “zapping the PRAM,” "resetting the SMC," “rebuilding the directory,” "defragmenting the drive," “running periodic scripts,” “dumping logs,” "deleting temp files," “scanning for viruses,” "purging memory," "checking for bad blocks," "testing the hardware," or “repairing permissions.” Such measures are either completely pointless or are useful only for solving problems, not for prevention.
    Let go of the Windows mentality that every computer needs regular downtime maintenance such as "defragging" and "registry cleaning." Those concepts do not apply to the Mac platform. The machine should not be a focus of your attention. You shouldn't have to think about it at all. It should be a transparent, almost unnoticeable tool by means of which you communicate, work, and play. If you want a computer that depends on you to keep going, use a PC.
    The very height of futility is running an expensive third-party application called “Disk Warrior” when nothing is wrong, or even when something is wrong and you have backups, which you must have. Disk Warrior is a data-salvage tool, not a maintenance tool, and you will never need it if your backups are adequate. Don’t waste money on it or anything like it.

  • UIXJSP App built off BC4J Project JBO Excep XML File not found for the Container

    Running JDEV 9.0.3 build 960
    Created a new project in folder "UIX JSP"
    "UIX JSP" note the space!
    Create a default UIX JSP Application based on existing BC4J Project
    When running a JSP - Get a JBO Error complaining that the XML File not found for the Container
    If I recreate the project with name UIX_JSP problem does not occur.

    I logged a bug on this.

  • XML File not found for the Container model.cpx

    I can run my application from JDeveloper without receiving the error. But when I deploy the application I get the following:
    500 Internal Server Error
    oracle.jbo.NoXMLFileException: JBO-26001: XML File not found for the Container model.cpx     at oracle.jbo.mom.DefinitionManager.loadProjectDefinition(DefinitionManager.java:751)     at oracle.jbo.uicli.mom.JUMetaObjectManager.createPool(JUMetaObjectManager.java:457)     at oracle.jbo.http.HttpContainer.findSessionCookie(HttpContainer.java:541)     at oracle.jbo.html.struts11.BC4JRequestProcessor.initPageFromPath(BC4JRequestProcessor.java:233)     at oracle.jbo.html.struts11.BC4JRequestProcessor.processMapping(BC4JRequestProcessor.java:123)     at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:234)     at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1292)     at org.apache.struts.action.ActionServlet.doPost(ActionServlet.java:510)     at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)     at com.evermind[Oracle9iAS (9.0.3.0.0) Containers for J2EE].server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:721)     at com.evermind[Oracle9iAS (9.0.3.0.0) Containers for J2EE].server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:306)     at com.evermind[Oracle9iAS (9.0.3.0.0) Containers for J2EE].server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:767)     at com.evermind[Oracle9iAS (9.0.3.0.0) Containers for J2EE].server.http.HttpRequestHandler.run(HttpRequestHandler.java:259)     at com.evermind[Oracle9iAS (9.0.3.0.0) Containers for J2EE].server.http.HttpRequestHandler.run(HttpRequestHandler.java:106)     at EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:803)     at java.lang.Thread.run(Thread.java:479)
    Any Ideas?

    Hi,
    please explicitly "make" the project. One reason for this problem could be that the model.cpx isn't created properly. Select the model project and compile the complete project before deploying it. Sometimes it helps to clear the "class" directory of the project on teh file system before re-compiling
    Frank

  • XML File not Found for the Container BC4J.cpx

    Hi,
    Have following error when I start a BC4J-JSP/Struts application (with Embedded and standalone OC4J) :
    500 Internal Server Error
    oracle.jbo.NoXMLFileException: JBO-26001: XML File not found for the Container BC4J.cpx
         oracle.jbo.mom.ContainerDefImpl oracle.jbo.mom.DefinitionManager.loadProjectDefinition(java.lang.String)
              DefinitionManager.java:751
         oracle.jbo.mom.ContainerDefImpl oracle.jbo.mom.DefinitionManager.loadProjectDefinition()
              DefinitionManager.java:793
         void oracle.jbo.mom.DefinitionManager.initManager()
              DefinitionManager.java:137
         void oracle.jbo.uicli.mom.JUMetaObjectManager.<init>()
              JUMetaObjectManager.java:57
         oracle.jbo.uicli.mom.JUMetaObjectManager oracle.jbo.uicli.mom.JUMetaObjectManager.getJUMom()
              JUMetaObjectManager.java:131
         oracle.jbo.common.ampool.SessionCookie oracle.jbo.http.HttpContainer.findSessionCookie(javax.servlet.http.HttpSession, java.lang.String, java.lang.String, java.util.Properties)
              HttpContainer.java:541
         boolean oracle.jbo.html.struts11.BC4JRequestProcessor.initPageFromPath(oracle.jbo.html.struts11.BC4JActionMapping, javax.servlet.http.HttpServletRequest, javax.servlet.http.HttpServletResponse)
              BC4JRequestProcessor.java:222
         org.apache.struts.action.ActionMapping oracle.jbo.html.struts11.BC4JRequestProcessor.processMapping(javax.servlet.http.HttpServletRequest, javax.servlet.http.HttpServletResponse, java.lang.String)
              BC4JRequestProcessor.java:124
         void org.apache.struts.action.RequestProcessor.process(javax.servlet.http.HttpServletRequest, javax.servlet.http.HttpServletResponse)
              RequestProcessor.java:234
         void org.apache.struts.action.ActionServlet.process(javax.servlet.http.HttpServletRequest, javax.servlet.http.HttpServletResponse)
              ActionServlet.java:1292
         void org.apache.struts.action.ActionServlet.doGet(javax.servlet.http.HttpServletRequest, javax.servlet.http.HttpServletResponse)
              ActionServlet.java:492
         void javax.servlet.http.HttpServlet.service(javax.servlet.http.HttpServletRequest, javax.servlet.http.HttpServletResponse)
              HttpServlet.java:740
         void javax.servlet.http.HttpServlet.service(javax.servlet.ServletRequest, javax.servlet.ServletResponse)
              HttpServlet.java:853
         void com.evermind[Oracle9iAS (9.0.3.0.0) Containers for J2EE].server.http.ServletRequestDispatcher.invoke(javax.servlet.ServletRequest, javax.servlet.ServletResponse)
              ServletRequestDispatcher.java:721
         void com.evermind[Oracle9iAS (9.0.3.0.0) Containers for J2EE].server.http.ServletRequestDispatcher.forwardInternal(javax.servlet.ServletRequest, javax.servlet.http.HttpServletResponse)
              ServletRequestDispatcher.java:306
         boolean com.evermind[Oracle9iAS (9.0.3.0.0) Containers for J2EE].server.http.HttpRequestHandler.processRequest(com.evermind[Oracle9iAS (9.0.3.0.0) Containers for J2EE].server.ApplicationServerThread, com.evermind[Oracle9iAS (9.0.3.0.0) Containers for J2EE].server.http.EvermindHttpServletRequest, com.evermind[Oracle9iAS (9.0.3.0.0) Containers for J2EE].server.http.EvermindHttpServletResponse, java.io.InputStream, java.io.OutputStream, boolean)
              HttpRequestHandler.java:767
         void com.evermind[Oracle9iAS (9.0.3.0.0) Containers for J2EE].server.http.HttpRequestHandler.run(java.lang.Thread)
              HttpRequestHandler.java:259
         void com.evermind[Oracle9iAS (9.0.3.0.0) Containers for J2EE].server.http.HttpRequestHandler.run()
              HttpRequestHandler.java:106
         void EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run()
              PooledExecutor.java:803
         void java.lang.Thread.run()
              Thread.java:484
    Then I make a Reload and it's ok.
    I have a Workspace with two Projects :
    BC4J.jpr for Businnes Components
    Web.jpr for JSP Struts
    In /classes I have the file Web.cpx, but no BC4J.cpx.
    From which does this name come ? Can I change this name ?
    Thanks
    Yves

    I found this on Metalink...
    JBO-26001: NoXMLFileException
    Cause: Could not open the named XML file for read.
    The following is from Note 137429.1. Hope this helps.
    Raja.
    JBO-26001: NoXMLFileException
    Cause: Could not open the named XML file for read.
    Action: 1. Make sure that the file is present. In particular, if the file is to be found in a zip/jar file, make sure that the Zip/JAR file is included in the CLASSPATH.
    2. This error is also reported if the name of the XML file does not match the object Name specified in the XML file. If the file system support case insensitive file names (e.g., Windows NT), make sure that the file name matches the object Name in the XML file in case-sensitive fashion.
    3. For a .JPX file, this error is reported if the JPX file is missing the JboProject XML tag. Check the JPX file to make sure that the valid tag is in there.
    4. One XML file may be extending another XML file (specified by the Extends element in this XML file). This error is reported if the base XML file is not found.
    5. When loading the XML file for a package (JboPackage tag), this error is reported if some unexpected error occurs while loading a containee.
    In all of the above cases, a more descriptive message may be printed on Diagnostic. If you are not seeing Diagnostic messages, you can run your application with Diagnostic turned on, as in "java -Djbo.debugoutput=console ...", to see Diagnostic messages.

Maybe you are looking for