What is best format for HD partition?

I am partitioning my external hard drive into 3 partititons.  I will use 2 of them for time machine drives and the third will be for general storage usage.
What is the best type of format to use for these partitions?

My read would be this:
Keep the TimeMachine drive (with only two partitions) for only TimeMachine.  You should not muddy-up your backups with "general use".
You can get a 16 GB or 32 GB thumb drive, and format it exFAT which both Windows and Mac can read and write.  Or get an external drive with higher capacity like 160 GB for the same purpose.  Just do the exFAT formatting on the Windows machine, as Macs do not always do this cleanly.
Further, when you can afford it, you should separate your two backups physically (separate external drives).  The chance of 3 drives (internal, two external) all dying at the same time is very very small, and much smaller than two drives (internal, one external) dying at the same time.

Similar Messages

  • What is best format for simple text animation in iWeb?

    I want to use a simple text animation "movie" in my site using iWeb.  I don't want the controller visible -- and I want the animation to play automatically.  I went to Inspector and checked for it to start automatically, but no effect.  I still have to manually click on it.  The mov file plays fine, but not automatically. 
    Second question:  is mov the best file format for what I'm tryin to do?  I admit to getting lost with all these formats/codecs.
    Thanks.

    Its not so much the movie format that matters as the way in which you decide to play it on your page.
    Dragging a movie file onto the iWeb page requires that the visitor has the QuickTime plugin - which a lot of people don't. Flash is not the answer anymore due the fact that iOS devices don't support it unless you provide fallback to HTML5.
    Here are some alternatives...
    http://www.iwebformusicians.com/Website-Movie-Video/Flow-Player.html
    http://www.iwebformusicians.com/Website-Movie-Video/Fallback-To-Flash.html
    http://www.iwebformusicians.com/Website-Movie-Video/JW-Media-Player.html
    http://www.iwebformusicians.com/Website-Movie-Video/Easy-Movie-Player.html
    Some stuff about movie files...
    http://www.iwebformusicians.com/Website-Movie-Video/Movie-Formats.html
    "I may receive some form of compensation, financial or otherwise, from my recommendation or link."

  • Dealing with old AVI files - what is best format for 'master' storage.

    I kept a lot of original AVI footage from the original DV Tapes. I see these as the MASTER material.
    I also have the same footage on MPG.
    My new Smart TV will link to ny network and can see the AVI files but not play them.
    It seems i need to convert them to a Divx format of AVI in order to play these files...
    Question is therefore 2 fold.
    1 - I want store/keep and have as 'masters' the highest quality of the orginal recordings. So is the best 'original',  the orignal DV Tape AVI files or would editing these via CS6 and outputing an MPG or MP4 format be as good as the 'original'.
    Despite 15 years messing about with digital editing, i remain baffled by what constitutes 'ORIGINAL FORMAT'.
    2 - How can I convert the AVI files from current set up to a Divx Codec that my SMART TV will recognise and play.  WIll CS6 do this or Encoder ?  I cant see an option.
    I've tried all AVI outputs and the SmartTV cannot read any of them.
    Regards
    Kev.

    About 4 years ago I transferred all my old 8/Hi8/DV tapes onto my PC exactly the same as you have done.
    The AVI is a standard introduced by Microsoft http://en.wikipedia.org/wiki/Audio_Video_Interleave gives the detail and history
    Smart TV's in 2012 could play AVI's or at least the youtube demo I just watched did so you may want to check the manual to find out precisely what your TV will play
    Keep the originals as they are, do nothing to them.
    Editing and output to whatever the TV can play, MPG and MP4 should be OK and as future proof as possible.
    Try exporting a short say 1 minute of mixed footage to MPG and MP4 and view these, I did just this with my network and Sony TV and they streamed great, then I edited all that old footage to MPG and MP4 (I saved the same movie to both formats just in case).
    Do remember that your AVI's will be SD and these will be upscaled by your TV to fill the HD screen
    Divx is great but quite lossy and there has been a myrad of types over the years so future proofing may be an issue.
    I cannot advise on CS6 as I use CS5.5.
    Finally before you ask.......edit SD AVI's export movies to DVD's and playing back via a good quality upscaling Bluray player will probably give the best HD results, far better than thinking about software upscaling your AVI's to HD
    Col

  • What the best format for compression to DVD

    I have a 18.91gb .mov file that I made of FCP and I want to compress it with out losing to mush quality, to be able to fit on to a DVD.
    So my question is which of the compression settings should I pick to start of with.
    Thanks
    Message was edited by: Jon 2050

    Compressor is doing a HD to SD conversion in addition to creating a MPG-2 file.
    I have had video turn out wonderful using this work flow and other times I have not.
    In worst case scenarios I have ended up doing the SD conversion in FC and then creating the MPG-2 from the SD FC export.
    If you have problems or are not happy with the final compression you may want to do a test on a problem scene with the above work flow and see if you get better results. Whenever I have had compressor issues this has solved it.

  • Best format for SSD when i use os x and windows

    Which is best format for my new SSD when i want use OS X and Windows together ? I mean when i will be in windows i can copy folders from windows to OS X folders and conversely ? Thank you for all info

    Before you do anything make sure that anything you have on your external hard drive is moved somewhere else as all information will be lost in this process. Then make sure it is plugged into your mac
    Here's what you need to do next. If you click on your Macintosh HD on your desktop then click on applications. Then scroll down and click on utilities. In there you need to click on disk utilities. When this opens you need to select your external hard drive from the list on the left.Then on the tabs at the top click on partition but just leave it all as is except you need to change the format from Mac Journaled to Fat 32 then click apply. It will then be ok for use on both Mac & PC but be warned they don't like each other so some stuff will work and some stuff won't. If it formatted for Fat 32 then mac will sometimes not read it through a wireless connection. (I am trying to figure this at the moment and can't seem to get it to work).
    Good Luck

  • When bouncing- what's best method for smallest file size/highest quality?

    I am in the process of embedding 3 mp3's into a PDF to submit as a portfolio. The PDF also has text, and two scores included, and with the 3 embedded mp3's it can't be more than 10mb.
    So my question is: When bouncing a project out of Logic, what is the best method for getting the smallest file size, but retaining the best audio quality? And once it's out of Logic and it is an mp3 or other type of audio file, is there a best format for compressing it further, and still maintaining the relative quality?
    I bounced out the three projects into wav's. Now I am using Switch for Mac to compress them down to smaller Mp3's. I basically need them to be about 3 mb each. Two of the recordings sound OK at that size, but they are just MIDI(one project is piano and string quartet, the other is just piano- all software instruments. The recording that combines MIDI and Audio and has more tracks (three audio tracks and 10 Midi/software instrument tracks)and sounds completely horrible if I get it under 5 mb as an mp3. The problem is that I need all three to equal around 9mb, but still sound good enough to submit as a portfolio for consideration into a Master's program.
    If anyone can help I would really appreciate it. Please be detailed in your response, because I am new to logic and I really need the step by step.
    Thank you...

    MUYconfundido wrote:
    I am in the process of embedding 3 mp3's into a PDF to submit as a portfolio. The PDF also has text, and two scores included, and with the 3 embedded mp3's it can't be more than 10mb.
    So my question is: When bouncing a project out of Logic, what is the best method for getting the smallest file size, but retaining the best audio quality?
    The highest bitrate that falls within your limits. You'll have to calculate how big your MP3's can be, then choose the bitrate that keeps the size within your limit. The formula is simple: bitrate is the number of kilobits per second, so a 46 second stereo file at 96 kbps would be 96 x 46 = 4416 kbits / 8* = 552 kBytes or 0.552 MB. (*8 bits = 1 Byte)
    So if you know the length of your tracks you can calculate what bitrate you need to keep it within 10 MB total.
    I consider 128 kbps the lowest bearable bitrate for popsongs and other modern drumkit based music. Deterioration of sound quality is often directly related to the quality of the initial mix and the type of instruments used in it. Piano(-like) tones tend to sound watery pretty quickly at lower bitrates, as do crash and ride cymbals. But don't take my word for it, try it out.
    And once it's out of Logic and it is an mp3 or other type of audio file, is there a best format for compressing it further, and still maintaining the relative quality?
    You can only ZIP the whole thing after that, but that is just for transport. You'll have to unzip it again to use it. And no, you cannot compress an MP3 any further and still play it.
    I bounced out the three projects into wav's. Now I am using Switch for Mac to compress them down to smaller Mp3's.
    That is silly, you could have done that in Logic, which has one of the best MP3 encoders built in. And how good encoders are will especially come out at bitrates around or below 128, which you might be looking at.
    I basically need them to be about 3 mb each.
    So, one more scrap of info we need here: how long are those three pieces, exactly? I'll calculate the bitrate for you - but please bounce 'm directly out of Logic as MP3's. They will very probably sound better than your WAV-conversions made with Switch.
    !http://farm5.static.flickr.com/4084/4996323899_071398b89a.jpg!
    Two of the recordings sound OK at that size, but they are just MIDI(one project is piano and string quartet, the other is just piano- all software instruments. The recording that combines MIDI and Audio and has more tracks (three audio tracks and 10 Midi/software instrument tracks)and sounds completely horrible if I get it under 5 mb as an mp3. The problem is that I need all three to equal around 9mb, but still sound good enough to submit as a portfolio for consideration into a Master's program.
    Length of the piece? And does the .Wav bounce you have sound OK?

  • Best Format for Archiving Video Files

    I am importing old VHS and 8mm family videos for my cousin, to both burn them to DVD, and to archive the movies in case he wants to edit them later.
    I am planning on purchasing for him, a "write once," external HDD, probably firewire, (though I am open to suggestions), to put both the backup Video TS folders on, as well as the Quicktime movies themselves.
    My guess is, the best format for the QT movies would be their original DV-NTSC, but at around 13GB an hour, this can add up pretty fast.
    The h264 .mov codec looks great, takes forever to render, and it seems the file size difference to DV-NTSC is nominal at best.
    Obviously the future is some kind of HD, so these movies will never look great years from now, but I want them to be preserved for him at the best quality possible, at the smallest file size, if it will not compromise the quality too much.
    I know I can render them significantly smaller as h264 .mp4 files, or as DIVX, (which also takes a long time), but I imagine they are of significantly reduced quality that would be visible in future video editing he might do.
    If DV-NTSC is the only way to go, so be it. But if not, then any suggestions for what other format I could use to save these QT files, without visible loss of quality is greatly appreciated.

    Thanks for all the advice. And I mean everyone.
    Here is my latest dilemma.
    Though 15 years old, the original Vhs's play beautifully. Aside from some (expected) glitches in the beginning or end of some of the shots, the video has not degraded appreciably. This is great news, as my cousin wanted to make back ups before degradation begins.
    First, I captured the Vhs movies and corrected some bad color, mostly due to poor white balancing, and on the computer, they looked great in comparison. I burned DVD's and they looked terrible in comparison with the originals. Now I know I am going to lose some resolution when going to DVD, but it seemed harsh, so I ran some tests.
    I burned a DVD of the original capture, with no color correction, just the raw footage and the DVD did not look much better, so it wasn't the color correction.
    Not satisfied, I made a copy from the FCP timeline straight to Vhs, (I should note, through the ADVC-110.) This looked significantly degraded as well.
    Finally, I made a straight dub from Vhs to DVCam, figuring that had to look good, and that also looked significantly degraded, compared to the, (now looking pristine), Vhs original.
    As the original Vhs looks so good, what good would a TBC do? Or a proc amp?
    Is there some secret to capturing and exporting Vhs that I am missing? Or, will it always look significantly degraded, even straight to DVCam?
    +David Murray wrote: There is an industrial way to get good VhS copies but it is extremely expensive+
    I don't know what this is, but I am sure it is clearly out of our league, but David M., if you are still following this thread, I'm curious, would this ultra expensive method actually result in a dub that looks like the original? I am actually really shocked at how bad the straight DVCam dub looks. It really does not look much better than the color corrected, computer exported version.
    The Vhs tapes of my cousins daughter are as precious to him as anything he has.
    As they date back 15 years, he is concerned about the longevity of the tapes.
    As there are over forty hours of them, he wants them to be in an editable format, so later he or his daughter can make a highlight reel, or whatever. So thus the QT movie archive/backup on HD.
    Whether as Finalcutter said, that this drive, even if unused, and put in a cool dry safe, might not function years down the line, makes it iffy, but what other choice is there for editable versions, unless I break the QT movies up into 20 minute chunks and archive them to over a hundred DVD's instead. Perhaps that is the safest solution, though certainly time consuming.
    As failure of the HDD somewhere in the future is likely, though not certain, I am still not sure that the HDD holding all his QT movies for future editing is the wrong way to go.
    As it is a digital version, and not an analog copy, I get that a DVCam backup of the originals is the best option. I will suggest to him that we do this as well, even though he does not have DVCam himself. But again, is there something I am missing here? Why does the Vhs to DVCam copy look so degraded? Is there anything I can do to keep the original quality, or will it die with his original Vhs as it slowly degrades over time?

  • Best format for converting video

    What is the best format for converting videos for your iPod? I am using handbrake but there are alot of settings. What is the best one? mp4,avi,ogm? and what about codecs? aac audio, mp3 audio,h.264 video mpeg 4 video, .mp4 video? Need help?

    See this Wikipedia article for some encoders:
    * http://en.wikipedia.org/wiki/Theora#Encoding

  • Best format for DVD studio pro??

    I will be exporting from FCP4.5 and am wondering what is the best format to get the best possible quality from FCP to DVDSP? Also, should I go through compressor and what settings should I use?
    I also want to make my own video transistions, what is the best format for those as well?
    Thank You

    The movie is 90 minutes.
    You didn't mention your video format. You can export your movie as QuickTime Movie (not QT Conversion), same settings and self contained (my favorite flavor). The use that movie in Compressor and use the Best Quality DVD: 90 min presets encoding your video to MPEG2 and your audio to Dolby 2 (AC3).
    That's the best standard workflow. With standard I mean that sometimes some kind of footage can need different treatment.
    Hope that helps !
      Alberto

  • Best Format For Front Row

    Hi what is the best format for videos in front row? Most videos I have are avis so I had been saving them as .mov files instead until recently when I discovered I could export them to Mpeg4 and in the process make them widescreen - I also noticed that when I saved these videos as .mov they took up about 5 gb but as mp4 they took up 500mb. So anyone have any opinions on what is the best way to do it?
    Cheers

    AVI and MOV are both simply "containers". The video and audio files inside them can be many formats with less or more compression. The MPEG-4 compression can be very good, of course, depending on the quality of the original file. The MOV files you saved must be using a different type of video compression that may be better quality but takes up more hard drive space. The "best" type of compression is probably a personal choice. What type of software are you using to save the files? QuickTime Pro?
    -Doug

  • Best format for ps3 and apple tv

    What is the best format for viewing movies on a hdtv (1080p) via ps3 and apple tv?
    Not sure what my best option would be in the sharing/export options, also should I make it 16:9 even though all the footage was 4:3?
    Message was edited by: rwltrz4

    Thanks.
    I've posted up on their forum too (the folks over there are not as responsive as you guys, helpful, but not in the same volume )
    I kinda hear what you're saying, but the encoding time (fps and time taken) is pretty slow on my PPC G5 iMac at the moment, and if the Turbo.264 is doing most of the processing then from what you say it'll stay the same on a new Intel Mac. I really hope not, or it'll be me throwing in the whole notion of recording TV on my Mac and heading off down the shop for a PlayTV for the PS3.
    Either that or hope for a decent upgrade to the Mini at Macworld, sling the Apple TV on to ebay (film rental selection here in the UK is still pretty weak) and replace with a Mini, plug the tuner in that and watch native EyeTV recordings without the need for lengthy encoding. I reckon Front Row, and an iPhone Remote will do almost as good a job for my music as the Apple TV does.
    One day we will look back and laugh at the notion of an hour long TV show being 'encoded' for playback at all, let alone waiting more than 2 minutes for the process to happen!

  • Best format for Premiere elements 12?

    What is the best format for making movies on PRE 12? My clips are now .mov files, whether on iPhone 5 or Nikon 7000 SLR. Should I still convert them to .AVI files?

    fish614
    Are you working with Nikon D7000 as well as the iPhone video?
    What are your settings for these devices when you record?
    How do you want to view the export of your Premiere Elements Timeline after you edit this video on the Premiere Elements Timeline?
    ATR

  • Best format for upload to a website

    i would like to know what is the best format for upload to a website, what i got now is an exported quicktime self contained movie from fcp 25 minutes in length.
    the footage itself is shot on mini dv and edited on an uncompressed 8 bit sequence, when exported to quicktime it is 28 gb in size so it is kind of a heavy one.
    is it possible to upload it in one piece ( apple recommends exporting to mpeg4 yet i got a bad quality out of this using mpeg streamclip.
    what would be the best compreessor for this
    than you very much

    i got a bad quality out of this using mpeg streamclip.
    Check the links that Cristina posted, then let us know if your quality improved, using Compressor...it should.
    One question for you regarding quality...are you referring to overall quality of the full frame image, or are you displeased with text/graphics.
    If this is the case, then I'd wonder if you edited in a DV sequence, then dropped the edited content into an 8bit timeline for exporting at better quality.
    This can cause degradation of the image (particularly text/graphics), since you're taking a 720x480 frame and ever-so-slightly vertically scaling the frame up to 720x486.
    Let us know what you did...and your results w/Compressor.
    K

  • What other file format for IDVD project?

    hi I have edited hd video files which are Quicktime movies in m-peg2 1920x1080.  The files currently put me over the size limit to be able to burn a DVD. I don't want to leave any of the files of of the DVD.  My question is what's the next best conversion format I should use so that they all can fit onto my DVD.  in other words I want to convert to a smaller size using compressor to fit the idvd project.
    Thanks
    RD

    I advice you to use Brorsoft Video to iDVD Converter.
    With it, you can convert video to the best format for burning to iDVD on Mac OS X. iDVD only supports video or image files supported by QuickTime. You can use the tool to convert video to QuickTime MOV file.
    Trick:
    For best results, in the QuickTime export settings of your video editing application, choose NTSC-DV with a frame rate of 29.97 or PAL-DV with a frame rate of 25. Choose No Compression for audio, and set the sample rate to 48 kilohertz.
    Tips:
    1. You can drag a QuickTime movie file to the audio well in the Menu Info window or in the slideshow editor. iDVD uses the first audio track in the file as a soundtrack for the menu that is open or for the slideshow and ignores the video. For more information, see Related Topics below. 
    2. If you share an iMovie HD project as a QuickTime movie using the Full Quality option, iMovie HD doesn’t include chapter markers in the QuickTime movie.

  • What is the format  for  0calmonth2,0calquarter,0calweek,0calyear,0fiscper,

    what is the format  for  0calmonth2,0calquarter,0calweek,0calyear,0fiscper,0ficper3, 0halfyear1, 0weekday1

    Hi Dominic,
    0FISCPER is a NUMC 7 infoobject. And it takes your 003.200 seven symbols leaving the last symbol. Though, the output format is length of 8.
    A'm not sure if you are dealing with external format (in this case try to enter 0032005) or with internal (then try 2005003).
    Best regards,
    Eugene

Maybe you are looking for