What is "code in" here

Hi All,
I have a query with regards to code in
I am looking into source code of an application where the source is like
where_clause := where_clause || ' code in (SELECT .....)
I want to know what this code in does , what its use/purpose
TIA

>
I am looking into source code of an application where the source is like
where_clause := where_clause || ' code in (SELECT .....)
I want to know what this code in does , what its use/purpose
>
In your example Oracle would compare the value of 'code' to each value returned by the subquery.
So if the subquery returns values of 10 and 20 the condition would be the equivalent of
WHERE CODE = 10 OR CODE = 20See IN Condition in the SQL Language doc
http://docs.oracle.com/cd/B28359_01/server.111/b28286/conditions013.htm#sthref2967
>
An in_condition is a membership condition. It tests a value for membership in a list of values or subquery

Similar Messages

I had a code to get logics pro for free and after it installed its asking me for a serial number does anyone know what to do from here.

I had a code to get logics pro for free and after it installed its asking me for a serial number but it never gave me one to put in, it just started downloading and then asked me. Does anyone know what to do from here.

I really don't think that is anywhere near on track.
Most likely the trial version was installed earlier, is that correct?

TS3297 can't connect to itunes store. getting code "11222". done all the trouble shooting i can think of. been on fone w/ "helpline", but no success. anyone got an idea what is going on here ?

Can't connect to Itunes store. Keep getting message code"11222". Done all the troubleshooting I can think of . Have researched my network settings and firewall settings. Have followed all the diagnostic routines. Been on the fone w/ HELP , no success. This code appears to apply to windows . but I can't get past this code. Anyone out there got a clue as to what is going on here ? thanks
sambodine

4 months and 80 views later, not a single response...
nice to know this support forum works....
Thanks (for nothing) apple....
and BTW, please continue ignoring this topic, cause i really dont give a **** about "genius" any more...

HT201210 My daughter put a pass code on her ipod &she forgot what it was how do unlock it

My 6 yr old daughter put a pass code on her Ipod & she forgot it now she can unlock it does anyone know how

hi try this
Options for when an iOS device gets locked because of forgotten password:
Restore (and reset password) on your device by connecting it to the last computer to which it was connected:
iTunes: Backing up, updating, and restoring iOS software -http://support.apple.com/kb/HT1414
If you cannot connect it to the computer to which the device was last connected you will have to use recovery mode to completely reset the device, losing all data:
iOS: Unable to update or restore - http://support.apple.com/kb/HT1808 - recovery mode (e.g., cannot connect to computer last used to sync device, iTunes still asks for a password)

What html code will start an EXE (program) with a click on a webpage link?

The code in bold below worked. After I switched my browser from IE 11 to Firefox to get the hover on hotspots to work, the program gave me this error message. I moved the EXE file to my local file folder and tried it as shown below. Still no success. Any suggestions?
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<title>Family Tree Charts</title>
<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1" /><style type="text/css">

</style></head>
<body link=blue vlink=blue>
<table width="100%" height="25" border="0" cellpadding="4" cellspacing="0">
<tr>
 <td width="93%" height="27" bgcolor="#EFEFEF"> <div align="center">
 This Software Allows You To Review Neat Charts of Your Family Tree </div></td>
 <td width="7%" bgcolor="#CCFFFF"> <div align="center"><A href="Mementos_Menu.html">Back</a></div></td>
</tr>
</table> <center>
 
Click the link below to download a special software program for your PC. 
 
<a href="http://jdmcox.com/">Cox Website</a> 
ITEM 1 (AT THIS WEBSITE) IS THE FAMILY TREE CHART PROGRAM. 
It is called Simple Family Tree 
<table width="80%" border="2" cellspacing="2" cellpadding="2">
<tr>
 <td width="49%" align="left" valign="top">Click the link below to use this special software program after you download and install the program. 
 

<a href="C:\Users\Tom and Polly\Documents\Genealogy CD\Simple Family Tree\Simple Family Tree.exe">Family Tree Charts Program</a> 
Click the "run" button for both warning messages. 
Click the "READ THIS!" menu option when the program opens. 
Click "X" in the upper right to close the program. 
You can update the family data in future years with this program too.
 </td>
 <td width="51%" align="left" valign="top">NOTE 1: Be sure your HTML code for this webpage has a proper line to link to the location where the software was installed. You can use NOTEPAD to make HTML code changes. My existing line is: 
 "c:\program files (x86)\simple family tree\simple family tree.exe" 
 The underlined portion will need to agree with where the program was installed. Just change the directory (see underlined sample above). Good luck. If I am still living, call me. 
 NOTE 2: After you download, install, and try to use the program, you may get an error message window that looks like this -"0 FAMS @F191 @ FAM". This means you have an individual record in your GEDCOM file that does not have a parent. Be sure all GEDCOM records have at least one parent even if you must name the parent UNKNOWN.</td>
</tr>
</table>
 </center>
<table width="100%" border="0" cellpadding="2" cellspacing="0" bgcolor="#CCCCCC">
 <tr>
 <td bgcolor="#EFEFEF"> ©2002 Sales and People</td>
 </tr>
</table></body>
</html>

Herbert:
Here is my latest code attempt, but I get messages about the lines in BOLD that I do not understand.
Perhaps you will see what I need to fix. Sure appreciate what you have found and shared with such a neophyte (aka dumbo).
Tom

function RunExe(path) {
try {
var ua = navigator.userAgent.toLowerCase();
if (ua.indexOf("msie") != -1) {
MyObject = new ActiveXObject("WScript.Shell")
MyObject.Run(path);
} else {
netscape.security.PrivilegeManager.enablePrivilege("UniversalXPConnect");
var exe = window.Components.classes['@mozilla.org/file/local;1'].createInstance(Components.interfaces.nsILocalFile);
exe.initWithPath(path);
var run = window.Components.classes['@mozilla.org/process/util;1'].createInstance(Components.inteinterfaces.nsIProcess);
run.init(exe);
var parameters = ["/c start Simple Family Tree.exe"];
run.run(false, parameters, parameters.length);
} catch (ex) {
alert(ex.toString());
This Software Allows You To Review Neat Charts of Your Family Tree
Back
Click the link below to download a special software program for your PC and your GED file.
*Cox Website*
ITEM 1 (AT HIS WEBSITE) IS HIS FAMILY TREE CHART PROGRAM.
It is called Simple Family Tree
Click the link below to look at my GEDCOM file contents. Instructions are provided in the READ THIS menu option at the top of the window.
*Show Yarnall Chart*
*Return to this webpage by clicking on the backarrow after looking at the chart.
You can update the family data in future years with this program too.*
©2002 Sales and People
Date: Thu, 2 Jan 2014 02:09:18 -0800
From: [email protected]
To: [email protected]
Subject: What html code will start an EXE (program) with a click on a webpage link?
 Re: What html code will start an EXE (program) with a click on a webpage link?
 created by Herbert2001 in Dreamweaver support forum - View the full discussion
Perhaps this might be helpful:
https://addons.mozilla.org/en-US/firefox/addon/opendownload-10902/
It allows executables in Firefox to be run - it is an extenstion, though, so it must be installed in Firefox before your page will work.
Another option is this solution, but it will still require a manual change in Firefox:
http://forums.mozillazine.org/viewtopic.php?f=19&t=803615
Or this: http://stackoverflow.com/questions/6472435/running-exe-in-firefox-why- do-i-get-an-error
However, you will still have problems with getting it to work cross-browser. Honestly, browsers are not supposed to have access like that to the client side file system, which absolutely makes sense for the web.
That is why you may have to approach the solution from a different angle - perhaps create a server side cloud version of your application(s) which can be easily accessed and run by your family members. I believe you used C to develop the applications? Although I have no experience with this framework, Wt might be a solution to convert your projects to server side applications:
http://www.webtoolkit.eu/wt
Good luck!
 Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5972893#5972893
 Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5972893#5972893
 To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5972893#5972893. In the Actions box on the right, click the Stop Email Notifications link.
 Start a new discussion in Dreamweaver support forum at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

Can anyone explain what is going on here?

Is the following code not recommend usage of interfaces?
public interface Test {
Test t1 = new Test(){};
}

why is:
Test t1 = new Test(){};valid inside an interface
and:
Test t1 = new Test();not?
what is {} really saying here?

Searching data in datastore - what T-code do I use?

What transaction code in BW is used to search the data in a datastore?
I want to search the data in a datastore in BW GUI similar to how I would search data in a table using SE16N.
Thanks.

DSO -> Manage -> Content -> Active data
Here u can see DSO table name.. ex /BI0/A(ODS name)00
U can use SE16 to search from that table

Help Dont know what this code is doing ?????

i dont know what this code is doing from the for part can some one explain it for me
i am confused starting at the for statement thanks for the help
public class LeastToGreatestPlaceHolder {
public static void main(String []args) {
 int [] myArray;
 myArray = new int[3];
 myArray[0] = 6;
 myArray[1] = 7;
 myArray[2] = 9;
 for (int i = 0; i < 2 ; i++){ // confused here
 for(int j = 1; j < 3; j++) {
 int placeholder = myArray[j];
 if (myArray[i] > myArray[j]) {
 myArray[j] = myArray;
myArray[i] = placeholder;
System.out.print(myArray[0]);
System.out.print(myArray[1]);
System.out.print(myArray[2]);

Have you tried running the program and seeing what it outputs?
Have you considered writing out the state of the array and running through the code by hand?
I'll give you a [head start|http://java.sun.com/docs/books/tutorial/java/nutsandbolts/for.html].

What is code in

Hi All,
I have a query with regards to code in
I am looking into source code of an application where the source is like
where_clause := where_clause ||
+ ' code in (SELECT+
I want to know what this code in does , what its use/purpose
TIA

Hi;
I suggest close your issue here as answered than move your issue Forum Home » Database » SQL and PL/SQL which you can get more quick response
Regard
Helios

My granddaughter put a pass code in her ipad and forgot it. how do you fix this?

My granddaughter put a pass code in her ipad2 and forgot what it was. How do you fix this?

If she's forgotten the passcode to unlock the iPad then she will need to connect the iPad to the computer that she normally syncs to and she should then be able to reset the iPad and restore/re-sync her content to it (http://support.apple.com/kb/HT1212) - she may need to put the iPad into recovery mode in order to be able to reset it : http://support.apple.com/kb/ht1808
If you do it via a different computer then :
If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present.

It says I've got 12,3 GB free space left, of my total 25GB. But my iPhone tells me there is no more space to take pictures or download stuff. It clearly says I have 12,3 GB left. What's the issue here??

It says I've got 12,3 GB free space left, of my total 25GB. But my iPhone tells me there is no more space to take pictures or download stuff. It clearly says I have 12,3 GB left. What's the issue here??

The issue is probably space on the phone, not in your iCloud account. (Space in your iCloud account does not give you more space on your phone.) Check Settings>General>Usage at the top to see how much available space you have. If it's low, you'll have to delete or sync something off our phone to make room for more.

I have 2 iphones on one itunes account. I just upgraded both to ios 8 and now the messages i receive come through to both phones when they used to be seperated. What is going on here?

I have 2 iphones on one itunes account. I just upgraded both to ios 8 and now the messages i receive come through to both phones when they used to be separated. What is going on here?

I noticed the same problem after upgrading a few iPhones to IOS 8, all use the same Apple ID. However, I now notice when I go into Message and instead of selecting a person from my contact list, I start typing their name which brings up a list of people, some of which are not in my contact list and are on one of the other iPhones. There's a circle/exclamation point next to the name which I click on, and one of the options is to "Remove from Recent". How did these names get from one phone to another and how do I remove all "recents"? They do not appear in my contact list. Anyone see this?

My daughter put in a restriction code on her ipod touch and I need to know how to reset her device as a new one and I also do not have her itunes account information?

My daughter put a restriction code on her ipod touch and i also cannot get onto her itunes account. I need to know how to reset her device as a new device?

See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once... Be sure to Follow ALL the Steps...
Take your time... Pay particular attention to Steps 3 and 4.

I am trying to set up iTunes match on my apple tv, but it just keeps showing that it is loading, it has been running for over an hour, what can be done here, it has gone with no problem on my iPhone, iPad but not the tv

i am trying to set up iTunes match on my apple tv, but it just keeps showing that it is loading, it has been running for over an hour, what can be done here, it has gone with no problem on my iPhone, iPad but not the tv

Same here and this is driving me crazy. I can buy, but can't upgrade. Grrr.

HT201372 used this to make a bootable copy for a new hard drive installation. copied the install find but gave error code 110 when making the disk bootable.. Any help in what this code is

Used createinstallmedis to make a copy of the Mavericks app for use in a new hard drive install.. Copied find but gave error code 110 and failed to make the flash drive bootable.. Any help in what errror code means?

Did you partition and format the flash drive first? See the following:
Make Your Own Mavericks, Mountain/Lion Installer
After downloading the installer you must first save the Install Mac OS X application. After the installer downloads DO NOT click on the Install button. Go to your Applications folder and make a copy of the installer. Move the copy into your Downloads folder. Now you can click on the Install button. You must do this because the installer deletes itself automatically when it finishes installing.
2. Get a USB flash drive that is at least 8 GBs. Prep this flash drive as follows:
Open Disk Utility in your Utilities folder.
After DU loads select your flash drive (this is the entry with the mfgr.'s ID and size) from the leftside list. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
Select the volume you just created (this is the sub-entry under the drive entry) from the left side list.
Click on the Erase tab in the DU main window.
Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
Click on the Erase button. The format process can take up to an hour depending upon the flash drive size.
Make your own Mavericks flash drive installer using the Mavericks tool:
Mavericks has its own built-in installer maker you use via the Terminal:
You will need a freshly partitioned and formatted USB flash drive with at least 8GBs. Leave the name of the flash drive at the system default, "Untitled." Do not change this name. Open the Terminal in the Utilities folder. Copy this command line after the prompt in the Terminal's window:
sudo /Applications/Install\ OS\ X\ Mavericks.app/Contents/Resources/createinstallmedia --volume /Volumes/Untitled --applicationpath /Applications/Install\ OS\ X\ Mavericks.app --nointeraction
Press RETURN. Enter your admin password when prompted. It will not be echoed to the screen so be careful to enter it correctly. Press RETURN, again.
Wait for the process to complete which will take quite some time.

What is "code in" here

Similar Messages

Maybe you are looking for