What is DB View in SAP MDM 7.1? How to create it?
Hi All,
Could you please let me know that what is DB view in SAP MDM 7.1?
I came to know that sap provides a special tool which does the creation of DB views.
Where will I get those tool details? and How to create it?
Thanks in advance,
Nirmala.
Edited by: C Nirmala on Oct 25, 2010 12:40 PM
Hello
This DB view is not part of standered shipmet. for that you need to contact SAP repsentative.
for more details you can refer below threads
DB Views in MDM
Re: MDM and Data Services Integration Scenarios - Part I: Advanced Consolidatio
Hope it helps
Rgds
Deep
Similar Messages
-
SAP Query-for Reporting how to create and use it
Hi SAP Gurus,
i need your help. in my project, client is asking to create queries to generate reports, i am not familiar with queries, so would appreciate it if any one can guide me and tell me the procedure for writing and creating queries soon.
also if you have any study material on steps on How to write and create queries for PP module
thank you very muchHi
Please refer below document
http://www.thespot4sap.com/Articles/SAP_ABAP_Queries_Introduction.asp
Also refer below
How to Create Infoset Query (SAP Query)
Steps on how to proceed to create a Query:
ADHOC QUERY
A query can be created to extract information from master records i.e Infotypes. For example, by creating a query , the data relating to an employee contained in various Infotypes can be extracted.
Proceedure :
Decide on the various Infotypes we want to make the query. Decide on the area where we want to query i.e Global area or Standard area. Standard area is client specific and globel area will include all clients.
Menu : HR PM Admn - Information System - Adhoc Query
Select area standard and select the user group already created
Creation of new query :
TC SQ03 - Select Environment Select Standard Area - Enter -- If new user group is to be created, enter name of the user group, click on create and enter necessary information and exit after saving
TC SQ02 - Enter name of the Infoset Create enter name of Infoset - Data source -- > Table join by basis table give name of table e.g pa0000 - Enter - Click on insert table if we want to include more tables give name of table one by one and after finishing, place cursor on the joining lines and right click to delete unwanted relationships - check - and go back - field groups - include all table fields - click on generate button - go out
TC SQ03 - Select user group - eg. Payroll
Infoset - Enter name of newly created Infoset
Assign users and Infosets - Assign infosets - put tick on payroll - save and go back
TC PAAH - Expand the nodes and put tick on relevant fields depending upon necessity
Save the query by giving the same name as infoset for easyness..
For executing a query which is already created
1. Go to SQ01 transaction
2. Go to Environment menu->query areas->std areas
3. Then choose the user group where the query is created
4. It will display all the queries created for the group.choose the query you want to executeand click execute.
5. will take to the initial screen
6. Enter the required parameters and execute
Regards
Ranga
Message was edited by:
Ranganathan Srinivasamurthy -
Maintenance View - Can you sort/Filter? How to create z transaction for it?
Hi,
I will be creating a maintenance view that will be used several times at the end of every month, eventually storing more than 500 entries.
Is there anyway for the user to be able to sort/filter the maintenance view by field? This would be helpful, since they would like to see what similar records are stored before adding others.
What are my options?
Also, how do you create a transaction code to go straight to the maintenance view instead of having to go through SM30?
Please help.
Thanks,
JohnHey John,
Is there anyway for the user to be able to sort/filter the maintenance view by field? This would be helpful, since they would like to see what similar records are stored before adding others.
What are my options?.
Option1:
We canu2019t give the sort button (as we give in the nomal reports). But if you know like - based on what field user want to see the sorted output(lets say field MATNR)? then we can create an Event for the table maintainance generator using SE11 and write the code. In this code we sort the output that will be displayed in SM30 as per the requirement.
Also, how do you create a transaction code to go straight to the maintenance view instead of having to go through SM30?.
Go-to SE93 and choose the option u201Ctransaction with parametersu201D and give the t.code as SM30 and Check Skip initial screen.
regards
Shyam. -
SAP PI 7.1 "How Tou2026 Create Modules for the J2EE Adapter Engine"
Hi everybody,
is the How To
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/02706f11-0d01-0010-e5ae-ac25e74c4c81?overridelayout=true
still applicable for 7.1?
Reason: out admin cant find:
u2022 aii_af_lib.sda
u2022 aii_af_svc.sda
u2022 aii_af_cpa_svc.sda
on the java stack.
Thanks Regards
MarioThis is for PI 7.1:
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/c0b39e65-981e-2b10-1c9c-fc3f8e6747fa?overridelayout=true -
I have created a xslt list view webpart but I does not have UI as SharePoint 2013 list view UI.
how I can have it.
Ahsan RanjhaHi Ahsan,
According to your description, my understanding is that the UI is different between XSLT web part and List View web part.
Per my knowledge, the List View web part is a kind of the XSLT list view web part which uses XSLT to display data on the page.
http://sharepoint-videos.com/list-view-and-data-view-web-parts/
How did you add the XSLT web part and the List View web part?
Could you please provide a screenshot of the two web parts?
Best regards.
Thanks
Victoria Xia
TechNet Community Support -
What is this technique called and do you know how to create it?
I meet a person at an art show yesterday that took photos and used a technique to collage them together (see attached photos for examples). I thought the pictures turned out awesome and I would love to try it myself. Any idea what tools/technique she was using to create the pictures? Any help you can give is much appreciated.
Looks like she just took two pictures and combined them using copy/paste or other methods.
For one of the pictures she used a cloud picture, which she modified by distorting by smearing and other techniques.
Start playing with images, that is what photoshop is for. -
What is Report category in SAP-HR Reports ?
Hi SAP-HR Experts .
Dear Friends tell me about
What is Report category in SAP-HR Reports ?
How to create it ?
Can we set authorizations for a Repots , if Yes the how can we set it .?
Please elaborate your replies with examples .
Best Regards to ALL .
Rajneesh .Report Category are used in reports with an LDB, usually PNP. Basically it's the configuration for the selection screen when the report is called. Among the choices you have which fields should appear on the first page, if sorting is allowed, etc, all sort of configuration.
How to see.
You can take one example, for example RPCALP0 (portuguese version, just substitute P0 with the version you use). Go to transaction SE38 and exhibit the report. Then yoy must select GOTO-->ATTRIBUTES and on the bottom tray there is a button that reads "HR report category". Just click that and on the next popup click Report Category again. So you have an example there of report category __M00001.
To create it's the same way, when you EDIT a report and click on report category the next popup has a create button.
The second question about authorization, it's quite simple, you can either use standard objects of authorization (like P_ORG for example), or your own Z objects. The sintax in ABAP is :
AUTHORITY-CHECK OBJECT 'Z_AREA_SUB'
ID 'PERSA' FIELD w_werks
ID 'BTRTL' FIELD w_btrtl.
if sy-subrc <> 0.
CONTINUE.
endif.
This is an example for a Z object to read authorization for WERKS and BTRTL of an employee. -
Difference between SAP MDM & IBM MDM
Hi,
Can any one tell me what is the difference between SAP MDM & IBM MDM, What are advantages of SAP MDM over IBM MDM.
Pl. give reply
the good answers will be get good points.
Thnks in advance.
praful.HI
SAP Master Data Management
SAP Master Data Management (SAP MDM) enables master data on customers, partners and products to be consolidated and harmonized across the enterprise, making it available to all staff and business partners. A key component of SAP NetWeaver, SAP MDM ensures data integrity across all IT systems.
The SAP NetWeaver Master Data Management (SAP NetWeaver MDM) component of SAP NetWeaver creates the preconditions for enterprise services and business process management. The functionality represents customers, products, employees, vendors, and user-defined data objects in unified form. With SAP NetWeaver MDM, customers can manage master data and supplemental content, such as texts, PDF documents, high-resolution images, or diagrams in a central business information warehouse.
SAP Master Data Management (SAP MDM) is a component of SAP's NetWeaver product group and is used as a platform to consolidate, cleanse and synchronise a single version of the truth for master data within a heterogeneous application landscape. It has the ability to distribute internally and externally to SAP and non-SAP applications. SAP MDM is a key enabler of SAP Enterprise Service-Oriented Architecture. Standard system architecture would consist of a single central MDM server connected to client systems through SAP Exchange Infrastructure using XML documents, although connectivity without SAP XI can also be achieved. There are five standard implementation scenarios:
Content Consolidation - centralized cleansing, de-duplication and consolidation, enabling key mapping and consolidated group reporting in SAP BI. No re-distribution of cleansed data.
Master Data Harmonization - as for Content Consolidation, plus re-distribution of cleansed, consolidated master data.
Central Master Data Management - as for Master Data Harmonization, but all master data is maintained in the central MDM system. No maintenance of master data occurs in the connected client systems.
Rich Product Content Management - Catalogue management and publishing. Uses elements of Content Consolidation to centrally store rich content (images, PDF files, video, sound etc.) together with standard content in order to produce product catalogues (web or print). Has standard adapters to export content to DTP packages.
Global Data Synchronization - provides consistent trade item information exchange with retailers through data hubs Some features (for example, workflow) require custom development out of the box to provide screens for end users to use.
http://www11.sap.com/platform/netweaver/components/mdm/index.epx
IBM MDM
n IBM's view, MDM is a set of disciplines, technologies, and solutions used to create and maintain consistent, complete, contextual, and accurate business data for all stakeholders (users, applications, data warehouses, processes, enterprises, trading partners, and so on). It's a holistic framework for managing structured and unstructured data that's aligned with business processes and managed throughout the information life cycle.
As Felix already given this link go through this link u will get more details.
http://www.db2mag.com/story/showArticle.jhtml?articleID=167100925
And also check these links for more knowledge
Microsoft MDM
http://www.microsoft.com/sharepoint/mdm/default.mspx
Microsoft MDM Roadmap
http://www.stratature.com/portals/0/MSMDMRoadmap.pdf
http://msdn2.microsoft.com/en-us/library/bb410798.aspx#mdmhubarch_topic1
I think it may help u
Regards
Hari -
What are mapping rules in sap xi/pi ?
hi experts
what are mapping rules in sap xi/pi ? how we can use this rules for special charters mapping .>
praveen.tecnics wrote:
> hi experts
>
> what are mapping rules in sap xi/pi ? how we can use this rules for special charters mapping .
to map special characters you need to use an element called CDATA in your mapping
a special character causes an error....as XI wont be able to read it (as it is not in a proper XML format)...so to parse this character through XI without causing an eror use the CDATA....just make a search on SDN and you will find the proper use of it....
For your info: http://www.w3schools.com/XML/xml_cdata.asp
Regards,
Abhishek.
Edited by: abhishek salvi on May 20, 2009 8:52 AM -
What is Infoset and How to create
HI Experts
Can any one please explain me what is the purpose of INFOSET in BW
and how to create a info Set between A Info Object and Cube
ThanksDear bw user,
Check the below link
http://help.sap.com/saphelp_nw04s/helpdata/en/ed/084e3ce0f9fe3fe10000000a114084/content.htm
Purpose is,
1.To join required data from basic InfoProviders
2.This allows building a relational BI data model with unified views for reporting (seeveral InfoProviders,but only one view). Therefore, we recommend keeping data in smaller, basic InfoProviders that can be flexibly joined for reporting purposes.
3. To allow BEx Reporting on a DataStore object without turning the BEx Reporting indicator on
4. To evaluate time dependencies (for example, join time dependent master data InfoObjects)
5. To be able to create self joins and left outer joins
Creatind in simple steps
Infoset is a Virtual Infoprovider.
Click on InfoProvider under modeling in RSA1 > Select InfoArea > right click Create Infoset > give name and description.
Select the ODS / Master Data Object or more than one ODS and maintain the link.
Infoset works on Join operation.
you can include Infocube if it is BI 7.
chk this link...
http://help.sap.com/saphelp_nw70/helpdata/en/a3/96663bd194a978e10000000a11402f/frameset.htm
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/2f5aa43f-0c01-0010-a990-9641d3d4eef7
Aslo see this link contents
Creating InfoSets
Prerequisites
Make sure that the objects for which you want to define the InfoSet are active. Create any required InfoObjects that do not
exist already and activate them.
Instead of creating a new InfoSet, you can transfer one of the InfoSets that are delivered with SAP Business Content.
Procedure
1. You are in the InfoProvider tree of the Modeling function area in the Administrator Workbench.
Choose the Create InfoSet function from the context menu (right mouse-click) of the InfoArea in which you want to create an
InfoSet. You get to the Create InfoSet dialog box.
2. Type in the following information for your new InfoSet:
¡ technical name
¡ long description
¡ short description
3. In the Start with InfoProvider section, you determine which InfoProvider you want to use to start defining the InfoSet.
¡ Select one of the object types that the system offers you:
ODS Object
InfoObject
Choose an object.
If you want to choose an InfoObject, it must be a characteristic with master data. The system provides you with the
corresponding input help.
4. Choose Continue. You get to the Change InfoSet screen. For more information on editing InfoSets see Editing InfoSets.
When you create an InfoSet, the system generates a corresponding entry for this InfoSet in the subtree of the InfoArea. The
following functions are available from the context menu (right mouse-click) of this entry:
Change
Delete
Object overview
Editing InfoSets
Prerequisites
Before you can get to the screen where you edit InfoSets, the following prerequisites have to be met:
You have created a new InfoSet.
You have selected the Change function from the context menu of an InfoSet entry in the InfoProvider tree of the Modeling
function area in the Administrator Workbench.
You have called the InfoSet Builder transaction, and selected the Change function. You can find additional information
under Additional Functions in the InfoSet Builder .
Procedure
1. You are in the Change InfoSet screen.
Choose a layout for the InfoProvider tree:
InfoArea
InfoProviders Used
All ODS Objects
All InfoObjects
For more information on the screen layout, particularly the layout of the InfoProvider tree, see Screen Layout: Changing
InfoSets.
2. Use the function Where-Used List via AWB to determine which BW objects use the InfoSet that you have selected. You get to
the Administrator Workbench: Where-Used List screen. You are able to work out what would happen in the system if you made
changes to the InfoSet. This helps you to decide whether or not it is sensible to make these changes at this particular point
in time.
3. You define the InfoSet by inserting one or more InfoProviders into the join.
There are several ways of inserting an InfoProvider into the join control:
¡ From the InfoProvider tree:
§ In the InfoProvider tree, double-click on the entry that corresponds to the InfoProvider that you want to add to the join
control.
§ Use the drag-and-drop function to move the InfoProvider into position.
¡ Choose the Add InfoProvider function, to add a particular ODS object or a particular InfoObject independently of the
current layout of the InfoProvider tree. You get to the dialog box of the same name. Enter the data that the system asks you
for.
If you know the technical name of the InfoProvider that you want to add, this method is quicker than switching the layout of
the InfoProvider tree.
When this function is complete, the InfoProvider that you selected is displayed in the join control. For more information on
the structure of the join control, see Join Control.
4. Define the join conditions. For more information see Defining Join Conditions.
5. You can get general information such as object version, date created and date changed via Goto ® Global Settings. You can
also set the indicator Most recent Reporting for InfoObjects from here. You can find additional information under Most recent
Reporting for InfoObjects.
6. Via the button Documents, which appears on the pushbutton bar, you can access document editing for this InfoSet.
7. You can use Check to check the correctness of the InfoSet definition. The log display is shown in the screen area under
the join control.
8. Save the InfoSet. The log display is shown in the screen area under the join control.
9. Activate the InfoSet. After activation, the system executes the checks. The result of the activation is displayed in the
log in the screen area under the join control.
Additional Functions in the InfoSet Builder
You can also use transaction RSISET to call up the InfoSet Builder when you want to edit an InfoSet. Select the InfoSet that
you want to edit. Value help is available for this. Additional functions are also available to help you edit and manage your
InfoSet.
Compare
You use this function from the main menu to check if the InfoProviders used in the InfoSet have been changed and the InfoSet
needs to be adjusted as a result. For more information, see Matching InfoSets.
Jump to object maintenance
You use the InfoObjects and ODS Objects functions to jump to the maintenance screen for the InfoProviders included in the
InfoSet definition.
Info functions
There are various info functions on the status of the InfoSets:
The Object Catalog Entry
The log display for the save, activate, and delete runs of the InfoSet.
Display in tree
You use this function to display in a tree structure all the properties of the A version (active) of the selected InfoSet.
Header data
InfoProvider and its fields
On condition
Wherecondition
The display is empty, if no active version is available.
Version comparison
You use this function to compare the following InfoSet versions:
The active (A version) and modified (M version) versions of an InfoSet
The active (A version) and content (D version) versions of an InfoSet
The modified (M version) and content (D version) versions of an InfoSet
The Display InfoSet screen appears. Depending on which option you choose, the system displays either all of the differences
between the two versions of the selected InfoSet or all of the properties of both versions in a tree structure.
Transport connection using AWB
You use this function to transport an InfoSet into another system.
The Administrator Workbench: Transport Connection screen appears.
The system has already collected all the BW objects that are needed to guarantee the consistency of the target system.
InfoSet data display
You use this function to access the data target browser. If you have already loaded data into the InfoProviders included in
the InfoSet, you can display this data.
Delete
You use this function to delete an existing InfoSet.
Copy
You use this function to copy an existing InfoSet and, if necessary, edit it further.
Show/hide technical names
You can use this function to show alias names for fields. These alias names are necessary in InfoSets, for example to be able
to map self joins. Field alias names start with F, followed by a five-digit number.
Defining Join Conditions
Use
A join condition determines the combination of records from the individual objects that are included in the resulting set.
Before an InfoSet can be activated, the join conditions have to be defined in such a way (as equal join condition) that all
the available objects are connected to one another either directly or indirectly.
Usually, however, only rows containing a common InfoObject or rows containing InfoObjects that share the same basic
characteristic are connected to one another.
Connect tables T1 and T2 using a join and set as a join condition that the F1 field from T1 must have the same value as F2
from T2. For a record from table T1, the system determines all records from T2 for which F2(T2) = F1(T1) is true. In
principle, as many records from T2 can be found as required. If one or more records are found, the corresponding number of
records is included in the result set, whereby the fields from T1 contain the values from the record from T1 under
consideration, and the fields from T2 contain the values of the records found from T2.
Procedure
There are various ways of defining join conditions:
Using a mouse-click
Position the cursor over a row in an InfoObject. Press the left mouse-button and, keeping the left mouse-button pressed down,
trace a line between this row and a row in another object. Providing that the join condition between the two rows that you
have indicated is a valid join condition, the system confirms the join condition by displaying a connecting line between the
two rows.
Using the Link Maintenance pushbutton
You get to the Link Maintenance dialog box.
In a tree structure on the left-hand side of the screen, all of the InfoProviders that are already included in the join are
displayed along with their fields or attributes. If you double-click on one of these fields or attributes, the system
displays on the right-hand side of the screen all of the fields or attributes with which you are able to create a join
condition.
In the Selection column, set one or more of the indicators for the fields or attributes for which you want to create a join
condition. The system generates valid join conditions between the fields or attributes that you specify.
You use the Delete Links pushbutton to undo all of the join conditions.
You use the All Characteristics or the Basic Characteristics Only pushbutton to choose between the corresponding display
variants.
We recommend that you use the Basic Characteristics Only option. The All Characteristics setting displays all of the
technical options involved in a join. If you are not able to find a join condition on the basic characteristic level, then
the All Characteristics setting is useful, but this is an exceptional case.
When you have finished making your settings, click on the Continue icon.
We recommend this method, because the system searches for all the possible join conditions for any field or attribute that
the user specifies, ensuring that the join conditions are defined without errors.
Using the Context Menu Left Outer Join Inner Join
Usually inner-join operators connect all the objects in a join to one another. You can also connect each object with any of
the many other objects by using a left outer join operator.
You can find additional information about usage and special features under Left Outer Join.
If you want to use a left-outer join operator to connect an object, select the object and choose the corresponding function
from the context menu.
The system displays all of the valid join conditions that originate from this object. The connecting lines that represent
these join conditions are labeled as Left Outer Join . InfoProviders, on which a left outer join condition is affixed, are
differentiated by color from the InfoProviders that are connected using an inner join operator.
If you used a left outer join operator to connect two objects, you have to make sure that all on conditions are linked except
for these two objects with the formulation of join conditions.
Note that you cannot add an object, which you have already connected by using the left outer join operator, to another
object.
If you want to use an inner-join operator instead of the left-outer join operator, select the object that you want to
connect, and choose the Inner Join option from the context menu. Again the system displays all the valid join conditions that
originate from this object, and labels the connecting lines accordingly.
Result
Once the join conditions have been defined in such a way as to connect all the available objects to one another, either
directly or indirectly, the InfoSet is ready to be activated.
You click on the Check pushbutton in the pushbutton toolbar to find out if these preconditions for the activation have been
met.
For objects that are joined by a left-outer join operator, there is one extra condition that has to be met, namely that all
the other objects have to be connected to one another either directly or indirectly.
http://help.sap.com/saphelp_erp2004/helpdata/en/ed/084e3ce0f9fe3fe10000000a114084/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/ed/084e3ce0f9fe3fe10000000a114084/content.htm
http://help.sap.com/saphelp_nw70/helpdata/en/a3/96663bd194a978e10000000a11402f/frameset.htm
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/2f5aa43f-0c01-0010-a990-9641d3d4eef7
Hope itr helps
Regards
Bala
Also -
What is BADI.How to create a BADI?
Hi all,
Can some one explain me about , What is an BADI.Where it is used .
How to create a BADI.
Iam in Initial stage, I want to know how to create a BADI.
Please help me regarding this.
Thanks,
Lee.Hi Lee,
Business Add-Ins
Business Add-Ins are a new SAP enhancement technique based on ABAP Objects. They can be inserted into the SAP System to accommodate user requirements too specific to be included in the standard delivery. Since specific industries often require special functions, SAP allows you to predefine these points in your software.
As with customer exits (SMOD/CMOD [Page 40]), two different views are available:
In the definition view, an application programmer predefines exit points in a source that allow specific industry sectors, partners, and customers to attach additional software to standard SAP source code without having to modify the original object.
In the implementation view, the users of Business Add-Ins can customize the logic they need or use a standard logic if one is available.
In contrast to customer exits, Business Add-Ins no longer assume a two-system infrastructure (SAP and customers), but instead allow for multiple levels of software development (by SAP, partners, and customers, and as country versions, industry solutions, and the like). Definitions and implementations of Business Add-Ins can be created at each level within such a system infrastructure.
SAP guarantees the upward compatibility of all Business Add-In interfaces. Release upgrades do not affect enhancement calls from within the standard software nor do they affect the validity of call interfaces. You do not have to register Business Add-Ins in SSCR.
The Business Add-In enhancement technique differentiates between enhancements that can only be implemented once and enhancements that can be used actively by any number of customers at the same time.
In addition, Business Add-Ins can be defined according to filter values. This allows you to control add-in implementation and make it dependent on specific criteria (on a specific Country value, for example). All ABAP sources, screens, GUIs, and table interfaces created using this enhancement technique are defined in a manner that allows customers to include their own enhancements in the standard.
A single Business Add-In contains all of the interfaces necessary to implement a specific task. In Release 4.6A, program and menu enhancements can be made with Business Add-Ins. The actual program code is enhanced using ABAP Objects. In order to better understand the programming techniques behind the Business Add-In enhancement concept, SAP recommends reading the section on ABAP Objects
DEFINING THE BADI
1) execute Tcode SE18.
2) Specify a definition Name : ZBADI_SPFLI
3) Press create
4) Choose the attribute tab. Specify short desc for badi.. and specify the type :
multiple use.
5) Choose the interface tab
6) Specify interface name: ZIF_EX_BADI_SPFLI and save.
7) Dbl clk on interface name to start class builder . specify a method name (name,
level, desc).
Method level desc
Linese;ection instance methos some desc
8) place the cursor on the method name desc its parameters to define the interface.
Parameter type refe field desc
I_carrid import spfli-carrid some
I_connid import spefi-connid some
9) save , check and activate adapter class proposed by system is
ZCL_IM_IM_LINESEL is genereated.
IMPLEMENTATION OF BADI DEFINITION
1) EXECUTE tcode se18.choose menuitem create from the implementation menubar.
2) Specify aname for implementation ZIM_LINESEL
3) Specify short desc.
4) Choose interface tab. System proposes a name fo the implementation class.
ZCL_IM_IMLINESEL which is already generarted.
5) Specify short desc for method
6) Dbl clk on method to insert code..(check the code in AAA).
7) Save , check and activate the code.
Some useful URL
http://www.esnips.com/doc/e06e4171-29df-462f-b857-54fac19a9d8e/ppt-on-badis.ppt
http://www.esnips.com/doc/10016c34-55a7-4b13-8f5f-bf720422d265/BADIs.pdf
http://www.esnips.com/doc/43a58f51-5d92-4213-913a-de05e9faac0d/Business-Addin.doc
http://www.esnips.com/doc/1e10392e-64d8-4181-b2a5-5f04d8f87839/badi.doc
www.sapgenie.com/publications/saptips/022006%20-%20Zaidi%20BADI.pdf
http://www.sapdevelopment.co.uk/enhance/enhance_badi.htm
http://help.sap.com/saphelp_nw04/helpdata/en/04/f3683c05ea4464e10000000a114084/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/e6/d54d3c596f0b26e10000000a11402f/content.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/c2/eab541c5b63031e10000000a155106/frameset.htm
Now write a sample program to use this badi method..
Look for BBB sample program.
AAA
data : wa_flights type sflight,
it_flights type table of sflight.
format color col_heading.
write:/ 'Flight info of:', i_carrid, i_connid.
format color col_normal.
select * from sflight
into corresponding fields of table it_flights
where carrid = i_carrid
and connid = i_connid.
loop at it_flights into wa_flights.
write:/ wa_flights-fldate,
wa_flights-planetype,
wa_flights-price currency wa_flights-currency,
wa_flights-seatsmax,
wa_flights-seatsocc.
endloop.
BBB
*& Report ZBADI_TEST *
REPORT ZBADI_TEST .
tables: spfli.
data: wa_spfli type spfli,
it_spfli type table of spfli with key carrid connid.
*Initialise the object of the interface.
data: exit_ref type ref to ZCL_IM_IM_LINESEL,
exit_ref1 type ref to ZIF_EX_BADISPFLI1.
selection-screen begin of block b1.
select-options: s_carr for spfli-carrid.
selection-screen end of block b1.
start-of-selection.
select * from spfli into corresponding fields of table it_spfli
where carrid in s_carr.
end-of-selection.
loop at it_spfli into wa_spfli.
write:/ wa_spfli-carrid,
wa_spfli-connid,
wa_spfli-cityfrom,
wa_spfli-deptime,
wa_spfli-arrtime.
hide: wa_spfli-carrid, wa_spfli-connid.
endloop.
at line-selection.
check not wa_spfli-carrid is initial.
create object exit_ref.
exit_ref1 = exit_ref.
call method exit_ref1->lineselection
EXPORTING
i_carrid = wa_spfli-carrid
i_connid = wa_spfli-connid.
clear wa_spfli.
http://help.sap.com/saphelp_nw04/helpdata/en/eb/3e7cf7940e11d295df0000e82de14a/frameset.htm
and
http://help.sap.com/saphelp_nw04/helpdata/en/eb/3e7cf7940e11d295df0000e82de14a/frameset.htm
Badihttp://help.sap.com/saphelp_erp2005/helpdata/en/73/7e7941601b1d09e10000000a155106/frameset.htm
http://support.sas.com/rnd/papers/sugi30/SAP.ppt
http://www.sts.tu-harburg.de/teaching/sap_r3/ABAP4/abapindx.htm
http://members.aol.com/_ht_a/skarkada/sap/
http://www.ct-software.com/reportpool_frame.htm
http://www.saphelp.com/SAP_Technical.htm
http://www.kabai.com/abaps/q.htm
http://www.guidancetech.com/people/holland/sap/abap/
http://www.planetsap.com/download_abap_programs.htm
http://help.sap.com/saphelp_nw04/helpdata/en/c8/1975cc43b111d1896f0000e8322d00/content.htm
/people/thomas.weiss/blog/2006/04/03/how-to-define-a-new-badi-within-the-enhancement-framework--part-3-of-the-series
/people/thomas.weiss/blog/2006/04/18/how-to-implement-a-badi-and-how-to-use-a-filter--part-4-of-the-series-on-the-new-enhancement-framework
http://esnips.com/doc/e06e4171-29df-462f-b857-54fac19a9d8e/ppt-on-badis.ppt
http://esnips.com/doc/43a58f51-5d92-4213-913a-de05e9faac0d/Business-Addin.doc
http://esnips.com/doc/10016c34-55a7-4b13-8f5f-bf720422d265/BADIs.pdf
http://esnips.com/doc/1e10392e-64d8-4181-b2a5-5f04d8f87839/badi.doc
http://esnips.com/doc/365d4c4d-9fcb-4189-85fd-866b7bf25257/customer-exits--badi.zip
http://esnips.com/doc/3b7bbc09-c095-45a0-9e89-91f2f86ee8e9/BADI-Introduction.ppt
http://help.sap.com//saphelp_470/helpdata/EN/eb/3e7cee940e11d295df0000e82de14a/frameset.htm
Thanks,
Reward If Helpful. -
How to create a view on tables with different keys?
I have to create a View on:
Z3PVR: Transparent Table
BSEG: Cluster Table
CKIS: Transparent Table
BKPF: Transparent Table
RV61A: Structure
T001: Transparent Table
All the tables have different "Key Fields" and the structure has no "Key Fields". When i create the view, what do I mention in the "JOIN FIELDS" tab. and how do i create the view with the structure?
Please advise.How to create a view on a Non-Transparent Tables.
how to create view?
HELP.. How to create a view with the tables with ALV -
How to create a left join view in se11??
I would like to create a view which contains KNA1,KONA,KNVV,KNVH(four tables) , I want to use this view to create a search help for Tcode 'VBO3'.
but when I join table KNVH, there is no data in view, because there is no customer hierarchy, so I want to create a left join view. could you please tell me how to create a left join view? Thank you very much.Hello,
yes, in general, maint. view and help view could be created as outer join view.
but it should obey relationship.
my fourt tables:
KONA -
> I want to get agreement number and type from this table
KNA1 -
>I want to get customer name, city, country from this table
KNVH -
>I want to get customer hierarchy from this table.
KNVV -
>I want to get customer group 1 from this table.
but in help view, I can only get relationship between KONA and KNA1.
I could not find the relationship for KNVH and KNVV.
if it's required to add a search help exit, then how to write the code in the function?
Could somebody please give me any solutions? thank you. -
What is the diffrence between SAP View and CAD View ?
What is the diffrence between SAP View and CAD View ?
What is the main purpose of SAP View
and
What is the main purpose of CAD View
On SAP help i found
SAP View is used for :The SAP view displays the SAP structure (document-based structure) for the active CAD object, or another document info record (header document), with a single-level or multilevel document structure in a tree structure. You can variably configure the fields using the layout editor.
CAD View is used for :The CAD view displays the document-based structure of the currently active CAD object, such as the structure of an assembly. The CAD system determines the complete (multilevel) structure and copies it either completely or in stages to the SAP system, in accordance with the default explosion level.
BUT I did not understand it well
Can someone explain this with an example
THanks
RajHello Raj,
SAP View can be further described as the view that is based on what is existing already in the SAP system. This view is generally used by SAP purchasing, MM people etc
CAD view is nothing but the replication of the model tree view in the SAP system. This is used by the design engineer and this view replicates only the parts that are actively displayed on the CAD tool window.
hope this helps. Let me know if you have further questions else please close the message.
regards
N K -
What are the must have SAP componets req to publish MDM 7.1.03.86 on web
Can anyone explain to me what are the SAP components required for MDM 7.1.03.86 allowing me create a webpage front end to MDM 7.1 and create and publish my own screens?
Like many I am very new to the world of SAP.
There are many others in my own company with a vast knowledge of what are all the pieces needed to run almost anything
In SAP. One of the exceptions to this rule is SAP Master Data Management (MDM).
We run:
- SAP MDM version 7.1.03.86
- A Windows 2003 server
- Oracle 10.X.
- 7.1 Import Manager
- 7.1 Import Server
- 7.1 Data Manager
- 7.1 Syndication Server
- I see reference to the 7.1 MDM Publishers but I donu2019t see the API in the way I have software loaded right now.
I would like to get to the point where I can create a web portal front end to the MDM product.
My problem is I canu2019t get anyone to give me a an answer as to what are the other pieced of software I would need to get
In an end to end solution. Starting with barebones and working up to the works!
Here is what I would like to be able to do:
- Publish in a SAP Portal screens to the web. (SAP NetWeaver CE Portal, PI Portal ????)
- Write code in Java, SQL, VB and more, save and test them. (SAP NetWeaver WebDynpro for Java ???)
- create a web screen in the portal and publish to a Portal or URL. (SDK kit or Developer's kit Like: SAP NetWeaver
Developer Studio ???)
- It looks to me like the "SAP NetWeaver BPM" product is "Nice" to have but not required.
This is soo confusing, PLEASE help!
Thank You
Steve THi Steve
Adding to Anu's response:
The prebuilt packages (worksets) cannot be used on a CE portal - only on a NW Enterprise Portal.
iView templates are also provided which allows you to put together your own pages and worksets. Again, these require the Enterprise Portal.
You don't have to use an SAP portal. You can use any webserver combined with Java code
(that makes use of the MDM Java API) to access the data (check out http://catalog.bd.com/ for a sample of this). Of course, this requires a lot more effort on your side.
"SAP NetWeaver BPM" amounts to NetWeaver CE. It is required if you want to make use of the WebDynpro components in new MDM releases.
Since you mentioned the MDM Publisher, if you want to simply publish "read only" data to a web front-end, you may be able to make use of the MDM Publisher together with Adboe InDesign.
Java code can make use of the MDM Java API. Windows development tools can make use of the MDM COM and MDM .NET APIs.
HTH,
Mark
Maybe you are looking for
-
Firefox Black screen with see-through search area/pannel
Firefox has suddenly encountered a problem where, when I open a new window it is black with the search area see-through. Here is a screenshot of what it looks like: http://i.imgur.com/JDexobz.png I've tried resetting and re-installing Firefox to no a
-
Auto conversion of Perchase req to Po
Hi, How to convert a req to po. As I checked auto po in material(purchaisng tab) and checked in purchasing data(control tab) of this vendor also. Where couild I be wrong? When I look at Stock requirements(MD04), it stays as req? Thanks in advance.
-
Condition Table for R/3 Product Substitution in CRM
Dear Experts, I managed to download object DNL_CUST_PDD, DNL_CUST_CND_PD, DNL_CUST_CNDALL. And also for condition object DNL_COND_D001. I believe that this D001 should contains the material determination which has been maintained in R/3. Now, my doub
-
Here's what I expect of my router: -Connect to a DSL modem (the modem itself stores the password, so I should not have to enter the password at the computer OR the router) -WEP 128bit encryption key and MAC Address Filter to allow only my computers i
-
ABAP Certification FAQ TAW12_04
Hi All, Did any one attended the Certifiaction of ABAP on TAW12_04. which is going on frm 3rd of this month to 14th of this month in INDIA. if anyone attended can any one tell me wat sort of questions came. how was the difficulty level..... thanks in