What is diff b/w order series and time seriesu2026

what is diff b/w order series and time seriesu2026

Hi S R,
Order series is the concept used in SNP whereas time series is concept used in DP.
ie In SNP, orders are stored in livecache as Order series whereas in DP, the historical data is stored with respect to time, ie time series in DP.
Regards
Senthil mareeswaran.

Similar Messages

What is diff B/W dalta image and reverse image

What is diff B/W dalta image and reverse image
Edited by: Philip Eller on Jun 3, 2008 8:44 AM
Edited by: Philip Eller on Jun 17, 2008 9:18 AM*

Please post your question to the BW forum.

What is the difference between E-Series and Commun...

Both E-series and Communicators are business phones,then what is the difference between them?
What is so special that there are two types of smartphones.

Communcatiors is just a name that nokia used to describe it's larger fold open business phones.
The last (and still the current) communicator was the E90 which uses the S60 operating system, so it is both an E series and a communicator. It was also the first (and only) communicator to use S60.
The long discontinued communicators of the past used a different operating system, S80. S80 and S60 are not cross compatible with each other.
S80 was dropped in favour of S60 when the E90 launched. This was a cost saving exercise so that nokia only had one smartphone OS to concentrate resources on.
Message Edited by psychomania on 18-Aug-2009 03:12 PM

What is diff b/w sy-index and sy-tabix

Hi all,
Can u plz give me the diff b/w sy-index and sy-tabix exactly and how it works.
Thanks & Regards
Venkat

Hi Venkat,
1.SY-INDEX
->Current loop pass
->In a DO or WHILE loop, SY-INDEX contains the number of loop passes including the current pass.
2.SY-TABIX
->Current line index
Current line of an internal table. SY-TABIX is set by the statements below, but only for index tables.
The field is either not set or is set to 0 for hashed tables.
APPEND sets SY-TABIX to the index of the last line of the table, that is, it contains the overall number of entries in the table.

COLLECT sets SY-TABIX to the index of the existing or inserted line in the table. If the table has the type HASHED TABLE, SY-TABIX is set to 0.
LOOP AT sets SY-TABIX to the index of the current line at the beginning of each loop lass. At the end of the loop, SY-TABIX is reset to the value that it had before entering the loop. It is set to 0 if the table has the type HASHED TABLE.
READ TABLE sets SY-TABIX to the index of the table line read. If you use a binary search, and the system does not find a line, SY-TABIX contains the total number of lines, or one more than the total number of lines. SY-INDEX is undefined if a linear search fails to return an entry.

SEARCH <itab> FOR sets SY-TABIX to the index of the table line in which the search string is found.
I think that it clears ur doubt.
Thanks,
Venkat.O

What happened to the Get/Set Date and Time utilities from RT 7.1?

I'd like to use the Get/Set Date and Time utilities that were available in 7.1, but disappeared after that. I see that the 7.1 utilites call a dll that does not appear to be installed with LabVIEW RT 8 and later. What do I need to do to use the utilites from 7.1 that do not appear in later versions?

In Labview 8.2 and later there are two directories for vi.lib. settime.dll is located in National instruments\Labview 8.2\Targets\NI\RT\ vi.lib
This is the dll you want to use in order to call it use the same Vi as in 7.1 (RT set date and time.vi) and link it to the correct dll.

Could anyone tell what's diff between mvt type 301 and 647?

Hi,
Since there has 301 already why still need 647??
What's the difference???
Thanks!!!
Would be better tell some detail regarding the movement type useage and difference in different module...
Thank you very much

Hi,
Movement type 301 is used to transfer material from a storage location in one plant to a storage location in a different plant. The value of the material is transferred at the moving average price of the issuing plant.
Movement 301 needs to be used each time material is moved from plant to plant. Normally both plants would be within the same agency and the physical distance not great when this movement type is used.
A goods issue for a stock transport order with delivery in Shipping is posted using movement types 641, 643, 645, or 647.
647 Goods issue for a stock transport order in one step
(Shipping)
Unlike movement type 641 when a goods issue is posted using movement type 647, a goods receipt line (movement type 101) is generated automatically in the receiving plant. If a purchase order item is flagged as a returns item in the stock transport order, you can post the goods receipt of the returns in the issuing plant with movement type 677.
For more knowledge in Movement type check out this
http://forum.saptechies.com/viewtopic.php?p=7505&sid=ee37f12564fc1c8aa9e5e131a5f402d9
Reward if this helps you
Regards
AK

What is diff b/w Include Structure and Append Structure at Database Level

Hi Experts,
Could you please let me know what is the main difference between .Include Structure and .Append Structure at SE11?
Thanks in advance and for good answer will give good points.
Sekhar

Hi,
1. Append Structures
Append structures can only be assigned to a single table.
Append structures are created in the custome rnamespace ( ZZ or YY)
In case of new versions of the standard table during upgrade, the append structures are automatically appended to the new version of the standard table
Append structures can not be used with cluster and pool tables
Append structures are created in transaction SE11. Display the standard table fields and press the Append structure button.
When you press the button, SAP sugests a name for the new append structure. After you has accepted the name,
a screen will be shown where you can enter the new fields.
Remember to activate.
2. Customizing Includes
Some of the SAP standard tables contains special include statements called Customizing includes. In contrast to Append structures,
Note that customizing includes are created by SAP, but the customer supply the fields for the include.
Customizing includes begin with CI_ and is part of the customer namespace
One Customizing include can be inserted into more than one table.
You can find Customizing includes in SE11 under structures.
Try to take a look at table RKPF which uses the Customizing include CI_COBL (In an IDES system). Next try to add a field to CI_COBL, and activate it. If you go back to table RKPF you will se that your new field has been added.
Regards,
Ferry Lianto

What is diff between oracle application server and weblogic server?

what is the exact difference between oracle application server and weblogic application server?

The difference between Oracle Application Server AND WebLogic Server has been discussed in a lot of forums dated 2008 and earlier comparing OAS10g with WebLogic10.0/WebLogic9.2
But, now since Oracle has taken over WebLogic, this is not really important.
Now, OAS has no further releases post 10g. WebLogic Server will be the Oracle's strategic application server going forward.
So, if your query is for choosing one of them for a new environment, you are better of with WebLogic Server 10.3.6 OR WebLogic Server 12g
As we will not have further releases of OAS and also OAS10g will be end of life soon, we recommend Oracle WebLogic Server.
If you still want to know the differences, here is one such old oracle documentation link that talks about it
http://docs.oracle.com/cd/B10467_16/migrate.904/b10425/asmwl02.htm
Arun

What is diff. b/w Class loading and class initializing??

Hi Guys,
When we are using final keyword as:
final static int cout;
Then class will load but not initialize?
Could any one explain this??
Thanks in advance.

>
When we are using final keyword as:
final static int cout;
Then class will load but not initialize?
Could any one explain this??
>
The class will load but not initialize? Where did you get that from?
See 4.12.4. final Variables in the Java Language Spec
http://docs.oracle.com/javase/specs/jls/se7/html/jls-4.html#jls-4.12.4
>
A blank final is a final variable whose declaration lacks an initializer.

Time series and Order series questions

Hi Guys - Need some help in understanding/Visualizing some basic APO concepts. I do not want to move further without understanding these concepts completely. I did read sap help and couple of apo books but none gave me a complete understanding of this very basic concept.
1. Data is stored in livecache in 3 different ways. time series, order series and atp time series. for now I am concentrating on just time series and order series. Can some one help me understand with an example how data is stored in time series and how it is stored in order series? I read that data which is not order related is called time series data and which is order related is called order series data.
My query is even in DP time series data, data is stored with respect to product and location that is transferred to snp. In SNP too data is processed with respect to product and location. so what is the difference in time series data and order series data?
2. what are time series key figures and what are order series key figures? I read safety stock for example is a time series keyfigure. why is it not a order series key figure? what makes a keyfigure time series or order series? can some one xplain this in detail with an example or numbers?
3. there is a stock category group in snp tab of location master LOC3. Stock category should be product related right? how is this related to location and what does this field mean in location master
Thanks a lot for your help in advance. Please let me know if I am not clear in any of the questions.

Hi,
Time series: Data is stored in buckets with no reference to orders.( If you place the mouse on time series data and right click for
                     display details , you will not find any information.
                      Suitable for tactical planing and aggregated planning. Usually in demand planning.
Pre requisite: 1. You need to create time series objects for the planning area.
                       2. When creating planning area you should not make any entries for the Key figure in the field Info Cube, category
                           and category group.
                       3. When creating planning area any entry you made in the field Key figure semantics with prefixed with TS.
                           (Optional entry)
Order series: Data is stored in buckets with reference to orders.( If you place the cursor on the order series data and right click
                      the mouse for display details , you will find information of order details.)
                     Useful for operative planning.
                     *You will have real time integration with R3.
Pre requisite: 1. You need to create time series objects for the planning area.( though you are creating Order series)
                      2.When creating a planning area specify a category or category group or enter a key figure semantics with prefix
                        LC.
                     3. When creating planning area you should not make an entry for the key figure in the field Info cube.
Thanks,
nandha

What is the diff b/w Sap Scripts and Smart Forms

Hi,
Whats the diff b/w SAP Scripts and Smart Forms..
I need the internal explanation for both Smart Forms and SAP Scripts mean when we execute what happens whether Print Program r Forms starts execution 1st and SIMILARLY FOR SMARTFORMS WHETHER FM'S R FORMS.
Thanks & Regards,
Gopi.

Hi
Difference with SMARTFORMS vs. SapScript(SE71)
The Following are the differences :-
a) Multiple page formats are possible in smartforms which is not the case in SAPScripts
b) It is possible to have a smartform without a main window .
c) Labels cannot be created in smartforms.
d) Routines can be written in smartforms tool.
e) Smartforms generates a function module when activated.
f) Unlike sapscripts (RSTXSCRP), you cannot upload/download Smartform to your local harddisk.
It was said that it was provided in CRM 3.0 version, but not available in R/3. You can download smartforms into Local PC in a XML format. In the same way you can upload this XML format into Smartform. From the smartform editor itself you can call download option, if you are working in CRM 3.0 environment.
In R3 also, you can download into XML format. However, it's not sure about uploading. Refer to the program 'SF_XSF_DEMO'.
In 4.7 Enterprise, other have seen this utlity which is completey missing in 4.6c. There is functionality to downlaod a complete form or only a particular node. (Utilities -> Download form). It will create a XML file and save it in the hard disk.
For others, if you want to download/upload the Smartforms source, you will need the help from the Basis people. What you can do is to create a Transport and then FTP down to your local harddisk. When you need the Smartform source in another system, you have FTP up the Smartforms file back to the SAP server. Finally, the Basis team, will tp it into your system.
g) The protect and endprotect command in sapscript doesn't work with smartforms. For example on a invoice: First data of position no 80. is printed on page one, other data of position no 80 is printed on page 2. And there's nothing you can do about it. Actually, there is something you can do about it. By using a folder node and checking the 'protect' checkbox, everything in that folder will be page protected.
check out this link:
http://www.sap-img.com/smartforms/sap-smart-forms.htm
Reward points if helpful.
Regards,
Swathi.

Wht is diff b/w sy-ucomm and ok code

hi,
what is diff b/w sy-ucomm and ok-code
Regards,
Rani.

Hi,
sy-ucomm is for doing the functions what the user wishes to do at that particular event. You use it in menus and other place . this mainly in using <pfstatus>
ok_code is generally used in screen as of I have used. You will define the function in the screen. and you can use it in the main program.
ok_code acts just as a temporary variable that stores the value of sy-ucomm.
When user interacts with the screen elements, the function code that you have assigned is filled in the sy-ucomm field which is turn gets reflected in OK_CODE.
In your ABAP programs, you should work with the OK_CODE field instead of SY-UCOMM. There are two reasons for this: Firstly, the ABAP program has full control over fields declared within it, and secondly, you should never change the value of an ABAP system field. However, you should also always initialize the OK_CODE field in an ABAP program for the following reason:
In the same way that the OK_CODE field in the ABAP program and the system field SY-UCOMM receive the contents of the corresponding screen fields in the PAI event, their contents are also assigned to the OK_CODE screen field and system field SYST-UCOMM in the PBO event. Therefore, you must clear the OK_CODE field in the ABAP program to ensure that the function code of a screen is not already filled in the PBO event with an unwanted value. This is particularly important when the next PAI event can be triggered with an empty function code (for example, using ENTER). Empty function codes do not affect SY-UCOMM or the OK_CODE field, and consequently, the old field contents are transported.
Diff bet OK-CODE and SY-UCOMM
Difference Between SY-UCOMM and OK_CODE
ok_code/ sy-ucomm usage in dialog program

Diff b/w alert Categories and configurations

Hi Experts,
Could you please help me here, what is diff b/w Alert Categories and configurations.
Ans also what is the use of Container elements in Categories.
You ans is very helpful for me.
Thanks in Advance all.
Regards,
Madhu.

Hi Madhu,
In Alert configuration alert rules are defined based on Alert Categories. So Alert Categories has defined using t code ALRTCATDEF. Container Elements fetches the appropriate dynamic message base on the container variable.
Go through the below doc:
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/00e97ba2-85ce-2b10-20bc-bc05cd172154?QuickLink=index&…
Regards,
Krupa

Get date AND time to show in the menu bar

What is that technique to get date AND time to show in the menu bar please?

Install iStat Menu
System Preferences -> iStat Menus -> Date & Time
\[X] Show Date & Time
Format .... \[Edit]
(*) Custom (drag tokens to build a custom format)
Drag a light blue token into the edit line below the token selections. If you want a space a colon a dash, etc... just type that character(s) before after draging a token into place.
I created: 9:35 PM Sat 1-Aug-2009
You can create anything you like in any order you like.
The other alternative (if you happen to be a fan of the Unix strftime() function) would be to use the % formatting characters in the Expert time format expression box. Use the Terminal "man strftime" to find out all the available % formatting codes.
But I think the Custom Drag & Drop section is the easiest to use.
However, if this doesn't work for you, then I guess it is just a case of "Your Mileage May Vary".

Work Status Report Date and Time Setting

Hi all
We are running BPC10 on servers configured with Central European Time which is currently 2 hours ahead of GMT allowing for Daylight Savings Time.
From what i can see in BPC10 date and times are now stored in GMT (Zulu time) in the Audit activity tables so when a user updates the work status at say 11:00AM local CET time then a value of 09:00AM GMT is stored in the Audit Activity Header table.
We have a report in excel that uses the EVLCK formula and will return the correct value of 11:00 am however if we run the Work Status Audit report on the Planning and Consolidation home page with user preferences set to Central European Time +1 then the time is displayed as 10:00am suggesting that daylight savings time is not accounted for. We need to set the time to Eastern European time +2 hours to display the correct figure.
Can anyone explain why this happens? Has DST been overlooked?
Rgds
Alan

Hi Alan,
probably it's a bug, I think it's better you open an OSS message to SAP.
Regards
Roberto

What is diff b/w order series and time seriesu2026

Similar Messages

Maybe you are looking for