WHAT IS ERROR HANDLING OPTIONS IN dtp? FOR DSO

hi friends,
what is use for every option error handling in dtp .
1) deactivated
2)no update , not reporting
3)valid records update, no reporting(request red)
4)valid records update, reporting (request green).
what is individual effect for my DSO, ple explain me acenerio,
for my DSO what can i select, why?
regards
suneel.

Check this help - self explanatory - trying checking F1 thats very informative and self explantory most of the times
Switched off
If an error occurs, the error is reported as a package error in the DTP monitor. The error is not assigned to the data record. The cross-reference tables for determining the data record numbers are not built; this results in faster processing.
The incorrect records are not written to the error stack since the request is terminated and has to be updated again in its entirety.
No update, no reporting (default)
If errors occur, the system terminates the update of the entire data package. The request is not released for reporting. The incorrect record is highlighted so that the error can be assigned to the data record.
The incorrect records are not written to the error stack since the request is terminated and has to be updated again in its entirety.
Update valid records, no reporting (request red)
This option allows you to update valid data. This data is only released for reporting after the administrator checks the incorrect records that are not updated and manually releases the request (by a QM action, that is, setting the overall status on the Status tab page in the monitor).
The incorrect records are written to a separate error stack in which the records are edited and can be updated manually using an error DTP.
Update valid records, reporting possible
Valid records can be reported immediately. Automatic follow-up actions, such as adjusting the aggregates, are also carried out.
The incorrect records are written to a separate error stack in which the records are edited and can be updated manually using an error DTP.

Similar Messages

Error Handling in table control for line item.

Hi,
Please how to do error handling in table control for line item in bdc,i have used format_message for header but i don't no fill decamps internal tabled and how to do background processing in call transaction.
Thanks

Background processing is not possible using call transaction method.
You can create an executable program which can have CALL TRANSACTION BDC code. And this can be run in background.
What do you exactly mean by Error handling for Items in table control. Can you give some more details.

Teststand error handling Option

Hi all,
I am looking for a way that when a step get error, Sequence will not be terminated but continue to run other steps.
I found no error handle option to fit my need as the below. Value 1 seems to be good but it terminated the sequence. Value 2 sumary test result validate as good which is not useful. is there any way I can change the error handle structure?
RTEOption_Abort–(Value: 3) Instructs the execution to abort the execution.
RTEOption_Continue–(Value: 1) Instructs the execution to process the error by propagating the error to the calling sequence, if one exists. If the current step group is Setup or Main, the execution jumps directly to the Cleanup step group.
RTEOption_Ignore–(Value: 2) Instructs the execution to ignore the error and continue normal execution.
RTEOption_Retry–(Value: 4) Instructs the execution to ignore the error and re-execute the step that caused the error condition. For the StationOptions.RTEOption property, the Execution.RTEOptionForThisExecution property, and the Thread.SetBatchRTEOption method, TestStand interprets the RTEOption_Retry value as RTEOption_Continue.
RTEOption_ShowDialog–(Value: 0) Instructs the execution to launch the Run-Time Error dialog box when an error occurs.
Purpose
Solved!
Go to Solution.

You could use the SequenceFilePostStepRuntimeError callback and handle errors if you need to do something custom.
An example ships with Teststand which will give you some pointers.
http://zone.ni.com/reference/en-XX/help/370052K-01/tssuppref/infotopics/callbacks_sequencefilepostst...
Beginner? Try LabVIEW Basics
Sharing bits of code? Try Snippets or LAVA Code Capture Tool
Have you tried Quick Drop?, Visit QD Community.

What is Error code "@43@####" in DTP, Temporary Data?

What is Error code "@43@####" in DTP, Temporary Data?
I am gerring this "@43@####" in Status field for some records, in DTP's Temporary data storage...
Please let me know the solution... Thanks..
Rammohan

Hi,
I guess you get some not allowed signs/characters in one field. Check psa for that and try to correct the values there.
regards
Siggi

XI Error Handling options

Hello,
Can anyone guide me on what are the options available for XI monitoring and error handling..for the support strategy.. and some URL and links on those will be helpful.
For instance ALERTS can be used,... or Regular Monitoring in SXMB_Moni (this is very crude for client)
Like that...
I just want to show the options to Customer.
Thanks,
Himadri
Message was edited by:
Himadri Chakraborty

Hi Himadri,
Error handling in XI is already discussed in our forum. I mention the same hereunder:-
You can handle the error in different places in XI
--Data validation in Mapping or Module Processor in the Adapter level
--Runtime Error handling with the help of Alerts
--Component Error Handling with the help of CCMS alert
--Using BPM
--Adapter Level Alerts
Check this link:
http://help.sap.com/saphelp_nw04/helpdata/en/56/b46c3c8bb3d73ee10000000a114084/frameset.htm
Mapping:
/people/alessandro.guarneri/blog/2006/01/26/throwing-smart-exceptions-in-xi-graphical-mapping
Case study:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/99593f86-0601-0010-059d-d2dd39dceaa0
CCMS:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/42fb24ff-0a01-0010-d48d-ed27a70205a8
Alerts:
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step
Regards.
Praveen

What are best output options in DVDSP for playback on VGA Computer Screen?

I understand that DVDs were designed to be viewed on TV sets - not computer monitors with much higher resolution than a TV set.
However .... I'm curious what the best output options are within DVDSP3 for playback on a standard 19" VGA computer screen 1024x768 and not necessarily on a TV screen. Any ideas?
Will DVDSP3 address playback on a standard VGA computer screen any better than iDVD6? .... or are they both very much the same?
Here's my objective:
MiniDV>FCP HD >DVD SP3>DVD-R / Playback on VGA 19" Monitor only (no TV involved).
or...
MiniDV>iMovie6>iDVD6>DVD-R / Playback on VGA 19" Monitor only.
TIA
SDMacuser

George - I'm not a web designer, so I'm probably not the best person to respond but here goes anyway (FWIW):
(anywhere from 10sec to 2min) for website visitors to play (but not download). There can be multiple audios per web page.
No problem. QuickTime. X-platform and you can set whether it's downloadable or not - but that's really moot, as anything on the web can be captured, especially with the 'analog loophole' such as WireTap or Audio Hi Jack.
I need a combination of buttons from very simple round (or square 20x20 pix) to a bar style with volume control, both with the option to change the color to fit my site.
Buttons are your business - nothing to do with playback functionality. They are usually just a link to a file - your site should be set up to play anything, by anything, that's clicked on… Flash, QT whatever
a player that runs from my site and not somebody else's.
So you're hosting? I'd hate to go down that path… what if your site takes off? What if it goes down?You'd never handle the bandwidth. IMO better to buy inexpensive (but competent) hosting for $10 or so per month and avoid the headaches, and expand the hosting service as and when required.
See here for example:
http://soundpropaganda.com/blog/loudness.html
I have QT files, not downloadable (well, supposedly) from text links (check the green "Here's" links). The link method (graphic, text, whatever) is your design, not part of the playback system.

ADF Error Handling Options

JDeveloper 11.1.1.5
I'm tring to handle errors to avoid showing java stack trace, SQL, and instead show user friendly messages.
(A) To handle errors in the model layer I setup DataBindings.cpx by I adding as ErrorHandlerClass="package.MyDCErrorHandler" that extends DCErrorHandlerImpl.
Inside MyDCErrorHandler I simply log the exception then throw a new JBO exception with a generic "Unhandled error call customer support" message instead of the exception message.
(B) On the task flow I created a method and marked it as exception handler as descibed here.
http://andrejusb.blogspot.com/2011/03/exception-handler-for-method-calls.html
http://andrejusb.blogspot.com/2011/03/exception-handler-for-method-calls_19.html
I do similar logic here, log the exception then show generic faces message "Unhandled error call customer support"
Is this a good methodolgy?
This seems to work fairly well but ocassionaly an exception slips through and shows default error message.
I'm now looking at this option
http://blogs.oracle.com/jdevotnharvest/entry/extending_the_adf_controller_exception_handler
How does this compare to extending DCErrorHandlerImpl(A) and task flow exception handler method(B)?
I note that this option uses Throwable instead of Exception. Will this handle java errors (like OutOfMemory)?

Hi,
I'm now looking at this option http://blogs.oracle.com/jdevotnharvest/entry/extending_the_adf_controller_exception_handler How does this compare to extending DCErrorHandlerImpl(A) and task flow exception handler method(B)? I note that this option uses Throwable instead of Exception. Will this handle java errors (like OutOfMemory)?
Actually the default ADFc Exception handler does not listen for all kind of exceptions but only those that can be handled by the controller. If you have an exception that is not handled by the ADFc exception handler then you can take a chance and handle this in your own exception handler class. You would handle the specific exception you are interested the most to handle and re-throw all the rest for the ADFc controller to try and handle.
Just create a custom handler and print the exceptions you receive in there. If this prints the OOM error then you can handle it. If it isn't shown here then you cannot handle it this way
Frank

Displaying errors when Enable automatic error handling option is on

In order to display error messages do I need general or simple error handler to implement if I have Enable automatic error handling on?
Solved!
Go to Solution.

Both will (optionally) display a popup when an error occurs. The general error handler just has more options for special cases. The simple error handler is typically sufficient.
If you havce automatic error handing enabled, you'll get a popup whenever a function generates an error AND the error output is not wired. Once you wire an error handler, the automatic error handling will no longer occur.
To display an error, you can also just place a plain error indicator on the front panel. This avoids annoying popup messages.
LabVIEW Champion . Do more with less code and in less time .

HT1438 What does error message number 1 stand for?

Hey guys I got a new iphone 4 yesterday because my old one had a spring break so the power button wouldnt work. The new phone worked fine for most of the day but last nighht showed a message saying i needed to plug the phone into itunes again and restore it. I have now tried to restore the phone on two seperate computers and both times error message number 1 has shown up with a note saying that apple can not process my request. Im wondering what the number means so that I can fix it and restore my phone. as it is now its useless. Its just a black screen with a charger picture and an arrow telling me to connect it to itunes.

Hi. Can you post the exact error message? I can't seem to find any info for "error message number 1".
Also have you tried resetting this to factory defaults using the phone? Under Settings, there should be an option for you to restore it.

Error handling in Abap Class for SAP Workflow

Hi Experts,
I would like to know if we have an option in abap classes used in workflows to send errors to the workflow log. We can achieve this in BOR Object methods by using the EXIT_RETURN <CODE> var 1 var 2 to send the errors back to the workflow, but how is this achieved through methods from classes used in workflows.
Appreciate your quick responses,
Chaitanya

Just raise exceptions in the normal OO way. Any exception that is a subclass of CX_BO_ERROR should be automatically available in workflow. Use subclasses of CX_BO_TEMPORARY for temporary errors.

Error handling in Native SQL for ORACLE

Hi,
I have the next code:
DATA instr TYPE char4.
EXEC SQL.
    SELECT INSTRUMENTO INTO instr FROM DATOSMAESTROS
END EXEC.
And I want to control if the select has no results. Is it possible with the statement EXCEPTION inside EXEC SQL? Something like that:
DATA instr TYPE char4.
EXEC SQL.
    SELECT INSTRUMENTO INTO instr FROM DATOSMAESTROS WHERE id_inst = '01'
    EXCEPTION
         WHEN NO_DATA_FOUND THEN
                  :err = SQLCODE
                  INSERT INTO error( field, code_err) VALUES ( 'instrumento',:err)
END EXEC.
Is this a correct code? If not, how can I do it?
Thank you all,
Cris.

Hello,
Take a look on this: http://help.sap.com/saphelp_nw04s/helpdata/en/fc/eb3b8b358411d1829f0000e829fbfe/frameset.htm
Try this:
DATA instr TYPE char4.
EXEC SQL.
SELECT INSTRUMENTO INTO :instr FROM DATOSMAESTROS
ENDEXEC.
Look that I put : inside the native SQL before the intr.
To catch if no data was recovered try this:
DATA instr TYPE char4.
EXEC SQL PERFORMING no_data.
SELECT INSTRUMENTO INTO :instr FROM DATOSMAESTROS
ENDEXEC.
FORM no_data.
IF instr IS INITIAL.
    MESSAGE ...
ENDIF.
ENDFORM.
Regards.

What is the Render option in 3D for?

The images look the same to me before and after the render and it takes a long time to complete. Want is the reason for using this tool?

Rendering produces the highest quality version for output e.g. for web, print or animation projects.
This help document has further information:
https://helpx.adobe.com/photoshop/using/3d-rendering-saving-photoshop-extended.html

Error when activating DTP for InfoCube

Hi
I encountered an error '**** Error from PSA ****' 'Error when activating Data Transfer Process DTP_436DF8XYKE2Y97CUX9W7FM0JH' while trying to activate the DTP for an infocube. Does anyone know why this happens and how to fix it ?
I'm on support pack 9 at this moment.
Many thanks,
Anthony

Hi Gnana
Thanks for your reply. Yes, I had already created the transformation for the bespoke cube, checked, saved and activated it without any error. Next, I created the DTP for this cube. Checked it and there wasn't any error. However when I activated it, I received that error message. I didn't get this error when I activated DTP for DSO and master data infoobject.
I have deleted and created the DTP like 5-6 times and still faced the same error message.
Prior to applying support pack 9, I didn't get this error message. Now that I did and also applied the collective OSS note 978148 (BI in SAP NetWeaver 2004s: OSS notes after SPS9), I received this error message.
Regards,
Anthony

Execution properties, Enable automatic error handling

Hi
I am writing real-time code for standalone execution on a cRIO-9074.
If I untick the "Enable automatic error handling" option in VI properties (Execution), what is the consequence if I have an application with no error handling case structures to detect the occurrence of errors elsewhere and within subVI's ? Does the error just go undetected and the application continue regardless? If ticked, could a standalone application hang as there is no user-interface for the error to get reported automatically to? Can I configure the LabVIEW RTE to automatically handle errors in a certain way regardless of individual VI settings of the "Enable automatic error handling" option?
I am a bit confused by the usefulness of "Enable automatic error handling" within RT/FPGA code, and where in the development process it is best enabled then disabled (if necessary).
Thanks

If I untick the "Enable automatic error handling" option in VI properties (Execution), what is the consequence if I have an application with no error handling case structures to detect the occurrence of errors elsewhere and within subVI's ? Does the error just go undetected and the application continue regardless?
That's the case: the error is lost (i.e. it's not handled), and the application goes on.
If ticked, could a standalone application hang as there is no user-interface for the error to get reported automatically to?
The property "Enable automatic error handling" is not availabe in the run-time engine, so there's no automatic error handling in a built application,
Can I configure the LabVIEW RTE to automatically handle errors in a certain way regardless of individual VI settings of the "Enable automatic error handling" option?
No, for the reason stated above.
I am a bit confused by the usefulness of "Enable automatic error handling" within RT/FPGA code, and where in the development process it is best enabled then disabled (if necessary).
There's no "Enable automatic error handling" property in Labview RT either.
Regards,
Marco

Error Handling for DSO

Hi all,
Is it not possible to give error handling options for DSO in Delta loads?
I have created a delta infopackage to load data from Order Line Item (2LIS_11_VAITM) into a DSO.
But the error handling gives only option 'No Update ,No reporting'.
I want to give the option 'Valid Records update, reporting possible (request green)' option.
Please let me know whether any setting needs to be done to make this option available.
Thanks in advance.
Meera

Check this help - self explanatory - trying checking F1 thats very informative and self explantory most of the times
Switched off
If an error occurs, the error is reported as a package error in the DTP monitor. The error is not assigned to the data record. The cross-reference tables for determining the data record numbers are not built; this results in faster processing.
The incorrect records are not written to the error stack since the request is terminated and has to be updated again in its entirety.
No update, no reporting (default)
If errors occur, the system terminates the update of the entire data package. The request is not released for reporting. The incorrect record is highlighted so that the error can be assigned to the data record.
The incorrect records are not written to the error stack since the request is terminated and has to be updated again in its entirety.
Update valid records, no reporting (request red)
This option allows you to update valid data. This data is only released for reporting after the administrator checks the incorrect records that are not updated and manually releases the request (by a QM action, that is, setting the overall status on the Status tab page in the monitor).
The incorrect records are written to a separate error stack in which the records are edited and can be updated manually using an error DTP.
Update valid records, reporting possible
Valid records can be reported immediately. Automatic follow-up actions, such as adjusting the aggregates, are also carried out.
The incorrect records are written to a separate error stack in which the records are edited and can be updated manually using an error DTP.

WHAT IS ERROR HANDLING OPTIONS IN dtp? FOR DSO

Similar Messages

Maybe you are looking for