What is expected from a two year experience ABAPer

Hi guys,
After working in ABAP for one year... what will be the expected experience from a two years experience ABAPer?
I have three years of experience in .NET and one year experience in ABAP.
I have finished my training a year ago in ABAP.
Any suggestion?
William Wilstroth

Hello William,
This is a rather difficult question, due to it's highly subjective nature. What an employer wants is something that cannot really be predicted.
some of them might want very strong skills in SAP Script and SMARTFORMS, while they really may not care if you have not worked on BDC. Some may want very good knowledge about the BADI and User-Exits concepts, while they don't mind if you are not familiar with LSMW, for instance.
If you're looking for a job, then please read the job requirements carefully. That is the best source for the kind of information you're seeking.
Regards,
Anand Mandalika.

Similar Messages

Is this what to expect from two WRE54G Range Extenders I've installed?

I bought a WRE54G Range Extender for home use with a WRT54G router at my home. My laptop and iPhone had poor signal strength in the room at the opposite end of the house from the router. I set everything up, it seemed to work ok, so I bought another one to do the same thing at work.
Now that I've had a couple of weeks of trying to use the Range Extenders with several iPhone and several laptops, including 3 hours on the phone with Linksys Support (Level 2) yesterday, I'm disappointed with my results. I'm having the same problem on both systems in both locations, configured for both the Linksys and the Fortinet wireless routers. Here's what I'm getting.
If I start a laptop or an iPhone within range of the router, I join the network fine. Then if I carry the device closer to the Range Extender, the signal becomes stronger after a minute or two and my problem is solved. But then the device loses the network signal after 3-10 minutes, regains it, but now I don't get an IP address, so I can't do anything. The only way to get back on the network is to carry the device back to the router, reconnect, then carry the device back to near the Range Extender. At my house the Range Extender is now about 25 feet from the router. At the office it's about 70 feet away.
On one of my laptops at home, if the laptop is connected via wi-fi with medium signal strength, when I turn on the Range Extender, within a couple of seconds the laptop gets knocked off the wi-fi altogether. Then it shows it's connected but either has 0.0.0.0 for an IP address of 169.x.x.x. Usually the only way to get that laptop to work is to power off the Range Extender.
On my iPhone I've got a wireless diagnostic application. From it I can see all the wi-fi signals, a couple of low strength ones from neighbors. I've got my network on an unused channel. Both the router and the range extender are set with the same channel, security settings, etc. They both show up with the same name.
Should I be able to connect to the Range Extender instead of having to connect to the router first, then move to the Range Extender? Is it normal to keep losing signal every 3-10 minutes? I've never had any of this trouble with the router, only with the Range Extender.
Maybe I need a different device and the Range Extender is not supposed to do what I'm trying to do. Anyone got any experiences or ideas to share?
Solved!
Go to Solution.

As you have mentioned in the Post that the Distance between the Router and the Range Expander is about 70 Feet. Well you can try to reduce the Distance between the Router and the Range Expander, you can make it upto 40 to 50 feet and then check if you are able to get connected to your wireless network.

Brand New iMac Won't Turn On - What To Expect From Support?

Hello,
I've been wanting to purchase an iMac for about a year now. Unfortunately I'm destitute, so puchasing this was a huge deal. I finally absolutely had to order it after using a PowerBook for two weeks that I have to plug an ancient monitor into, and recently I've had to use the track pad, inverted, as the one USB port fried and I have to position the laptop a certain way because of how I run the cables.
Anyway... today felt like Christmas. Such a beautiful computer. I installed World of Warcraft, ripped a few CDs onto iTunes and then randomly, "fzzt." I knew it was bad... it sounded like something "blew" and, sure enough, it won't shut on.
I've tried everything possible and I'm pretty sure it's the motherboard or power supply. I'm obviously incredibly upset, but to soothe myself until I can call phone support in the morning I'm wondering... what should I expect with this experience? I purchased through Amazon, but I'm assuming that doesn't matter. Will I get a new computer since this was obviously a lemon, or will they refurb mine? Will they retain my HD? How long does this usually take? I need this for work, which is most worrying. Kind of feel like crying. Is it okay to cry, and how hard? Do I have to send my pretty little mouse and keyboard back, too?

Hi I am a totally new mac user myself, how did the WoW install go, Im swithcing from a PC to an Imac? and I have been playing WoW since vanilla, so Im quite apprehensive about the change.
Should I expect the same problems, my Mac's are being delivered next week some time?

I recently got a new laptop and i havent downloaded new music for many months off iTunes and i have always used my aunts laptop. I setup up an my itunes sccount but it only showed downloaded music from over two years ago. How to fix it?

I recentl bought a new laptop and setup my itunes and couldnt remember my account informaion. I got logged in but only 60 of my 750 songs were on there and they were downloaded over 2 years ago on my aunts laptop and that is the only place i have ever downloaded from my itunes. I would like to get new songs but im worried to sync it because it ssays all my music will be removed. Is it possible i have my ipod connected to two accounts? If not can anyone explain what has happend or help me out of this pickle?

I have tried many things and none of them work i have purchased over 340 songs itunes and id really noy like to lose them all.

What to expect from a new build I'm planning

I have a basic "opinion" or "guess" question, please.
I'm planning a new build at some point and have to make a decision on when to take the financial plunge. In a few months, funds will be better, but I can manage the cost now if the speed improvements will be worth it. Speed improvements mean time which means money.
I'm running a small business producing videos for ourselves for business presentations (marketing and fund-raising) using Premiere Pro, outputting to FLV and DVD.
My content is pretty simple: video footage (talking head) from a camcorder, with two more tracks for titles and Photoshop images, with dip-to-black transitions. Soon I'll have my video guru provide some 3D animations that will also be included.
Until now, I've been capturing my footage into an interlaced project where I cut the raw footage into usable pieces. Then, I output those pieces to AVI, which I then run through a routine in Virtual Dub with presets my guru provided me with to take care of noise reduction and deinterlacing. Then, I import that resultant AVI (or set of AVIs) to a progressive project where I finish my editing and add the additional tracks with the titles, images and transitions.
Then, I output that to AVI, and convert those AVIs to FLV and/or use Encore to create DVD images.
The main concern I have is the very long wait times when I output to AVI from Premiere, process with Virtual Dub, and output to DVD image from Encore. (Of course, reduction in any wait time adds up, too.)
So, I have to try to guess at what kind of time I'll save when doing those tasks (and across overall working time) once I build the new machine. That will help me decide on whether to build the new machine now or later, based on the financial criteria.
I currently own an HP workstation, but it will not support the new Fermie CUDA cards. I want to use a GTX-470 (or -480). This is the pivotal issue that requires I build a new machine. Until then, I’m not using the CS5 MPE-CUDA features. What I don't know is how much time it will really save me on those major time-consuming tasks when I do make the jump.
One important consideration may lie in the fact that, accoring to my video guru, one of the advantages of the way Premiere CS5 plays well together with the approved CUDA cards is that it does GPU-based deinterlacing. He's suggesting this should may save me the time of having to do it in Virtual Dub phase (I'm not sure what he suggests about the noise reduction -- I think he may have commented that it may no longer be unnecessary, though to me it has seemd to make a huge improvement).
(Note: I see there are still some bugs in CS5 that hamper the benefits for now. For instance, I've read that there's an issue with CS5 whereby it takes a long time to export to AVI, and that there's a compromise with DV on an external monitor, but I don't know that those are issues in my decision since the former is going to exist regardless of whether I do the new build and the latter probably doesn't even apply to me.)
Here are my two system configurations, the "before and after," that I want to compare or, rather, to please ask for some guesses about as to potential time savings. Maybe I should call them the "Current" and "New build."
CURRENT:
- HP z400 machine -- mid-tower (no room for cooling a Fermie card)
- CPU: Xeon quad-core 4-thread
- RAM: 8MB DDR2
- GPU: nVidia FX-580 (obviously won't support new benefits of CS5 the way the GTX-470/480 in the new build will)
- DRIVES: one HD for OS/apps, one HD for swap, and three HDs in a RAID-5 array for data
NEW BUILD:
- high-end full-tower case with plenty of cooling support
- MOBO: ASUS P6X58D
- CPU: i7 930 (maybe OCd a bit, or maybe 980x)
- RAM: 12GB DDR3 triple-channel
- GPU: nVidia GTX-470 (or maybe 480)
- DRIVES: either same as current system, or maybe going to five drives in a RAID-3 array for data
I'd be hugely grateful for any guesses as to how much time in the major encoding tasks (and in overall work time) the new build is likely to save me.
Thanks so much!
Jay

Bill Gehrke wrote:
Jay, I wonder about this statement of yours "I currently own an HP workstation, but it will not support the new Fermie CUDA cards". How did you come to that conclusion?
Hi Bill,
Well, I make that assertion after a huge amount of time lost trying to make it work.
(See my posts July 16 and July 18th in this thread for the longer version of my excursion: http://forums.adobe.com/message/2945538#2945538)
The GTX-470 calls for at least 550W of power, The HP z400 workstation comes with 475W and it's a proprietary power supply. It won't take a standard ATX PSU -- the screw holes won't line up and even its pin-out for the system power plug is custom.
Undaunted, I bought a Corsair HX750W power supply and placed it outside of the machine on the floor, and used it solely to power the GPU.
I put the GTX-470 in and left the case cover off while familiarizing myself with Windows 7 for a couple days, but when I came into the office the third say the machine was locked up and the GPU was scorching hot. All fans on all components seemed to be working fine.
(I also noticed that the onboard sound never installed and there was no sound, and that the Sound, video and game controllers section in Device Manager only had four instances of "NVIDIA High Definition Audio." HP tech support was at a loss. My video guru says those drivers are probably normal from the GTX-470 card, but nobody could explain why the mother board considered that a replacement for the onboard sound. We don't know if that was a sign of imperfect compatibility between the GPU and mother board, which seems feasible since I had already learned -- the hard way after days of work -- that the mother board was at least a little custom in that the PSU was custom even at the system plug.)
So, when I had come that mornign and found the machine locked and the GPU super hot, I expermimented by cooling the machine down with a huge 12" external fan, then rebooted. For the next fifteen hours I waited to see if it would again heat up and lock up (or was it "lock up then heat up"?) and put more load on it by playing an AVI in WMP full-screen a number of times. For those fifteen hours the system ran fine and GPU stayed somewhere between cool and only very moderately warm.
Nobody has had a reason why it had ended up with the machine locked and the GTX-470 resulted scorching hot.
Bad GPU? Insufficient cooling? (Which maybe caused the system board to lock down the machine... which caused it to keep the GPU going with insufficient fan power???) Incompatibility between the GPU and system board? (Which had caused it to lock up the GPU in "on" mode and thus get scorching hot?)
And the consensus among those who thought it was a cooling issue was "almost" unanimous in saying that just running it with the case cover on would not be enough to keep the GPU reliably below the necessary cooling threshold, especially since I hadn't even begun to put a real load on it (I hadn't even installed Premiere on the machine yet).
And, it seemed evident to me that trying to creatively pack the machine with fans and cooling was just not realistic. If it is, I'd like to know, since that would be a lot cheaper than building a $5,000 machine. Here's a picture of the machine with the GTX-470 in it: www.silver100.com/x/z400_GTX-470.JPG.
Of course, all the cooling in the world still wouldn't help if the problem was compatibility with the system board.
You'll notice I got no responses at that other thread when I asked what the "guess" was as to the cause. So, I figured that -- short of it being a bad GPU -- building a new machine was the only way to fix it if it was a cooling problem and the only way to fix it if it was a compatibility problem.
I'm sure anxious to hear your thoughts.
Thanks so much!
Jay

Engineer no show - Is this what to expect from BT?

So I'm a disgruntled Virgin Media user and hoped (god hoped) that BT would be able to give me a stable connection. I'm not fussed about having the fastest speeds in the world 40/10 is more than enough (currently on 50Mbps cable).
So, virgin media cancelled and ordered BT Inifinity. Install date was today, and no one has showed up. I've taken the day off from work and its now been confirmed that BT are having "staffing issues" but not so bad they couldn't answer the phone after I request to know what is going on. So, would it be so hard for a company to contact all of the poeples installs who couldn't be done today so maybe they could make the most of their day off rather than sitting around waiting for no one to turn up.
I'm not interested in some pointless statement about how the product is provided by a different firm, how BT have to put orders into openreach etc...
Is there someone out there who can sort out my details to that you have my correct email address int the system and so that I can have my copy of the contract.
Unhappy.

Dont expect a speedy result mate. I have been waiting for 6 weeks to get a competent engineer out to put right what the first one bodged!! Ive talked to 15 people, put in 3 official complaints and still getting nowhere! It seems that BT India cant actually talk to BT Openreach, even tho they are part of the same umbrella! It has to be done by email, and we all know how easy they get lost! Also we as customers are not allowed to talk to Openreach ourselves, so in a nutshell, dont get your hopes up for quick result! x

If the battery swell up thrice , what is expected from the company?

The Battery in my laptop has been replaced twice and this is the third time the battery has swollen up.
Since the first time it was swollen I have asked the reason but Apple has not come up with a reason and just replaced it.
Second time also the service centre replaced the battery but were unable to give me a reason.
I had asked them to replace the laptop as this has been happening repeatedly and seems to be something with the laptop
otherwise why should every battery they put swell ?
This is the third time this has happened. And now they refuse to replace the battery or the laptop also.
What is the solution?

This is the iPhone forum

I've installed 10.8.1 on new MBP w/ retina display and battery starts at 8 hr charge and drops to 7 hr in just 30 minutes of run time. This is not what I expected from Apple!!

I've installed 10.8.1 on new MBP w/ retina display. Fully charged battery shows 8 hrs at 100% then drops to 7 hrs after only 1/2 hr of use. I was hoping that 10.8.1 would have fixed a obviously well publicized defect.

jemham wrote:
I've installed 10.8.1 on new MBP w/ retina display. Fully charged battery shows 8 hrs at 100% then drops to 7 hrs after only 1/2 hr of use. I was hoping that 10.8.1 would have fixed a obviously well publicized defect.
Sorry pal, not this time. The release notes for 10.8.1 do not discuss anything about battery issues. I do know Apple is aware of the problem thought and are working on a fix, hopefully in the forthcoming 10.8.2.

HT1391 Recently my iPod touch 4th gen. was stolen. I have had it for two years, so I don't have a warranty on it anymore. I reported it to the police, but what will apple do? This one kid reported to them that his was stolen and they gave him a new one.

Recently my iPod touch 4th gen. was stolen. I have had it for two years, so I don't have a warranty on it anymore. I reported it to the police, but what will apple do? This one kid reported to them that his was stolen and they gave him a new one. Will they do the same for me? Is there any other way I can get all my pictures from my iPod without iCloud set up? Would Apple be able to lock up my iPod so they cant use it at all? Please help me, thanks (:

ipod touch lover wrote:
Recently my iPod touch 4th gen. was stolen. I have had it for two years, so I don't have a warranty on it anymore. I reported it to the police, but what will apple do?
Nothing... why would they do anything?
Apple does not provide insurance and they are not law enforcement.

I need to cancel a line that is no longer used but I'm told that, since I transferred an upgrade from the unused line, the contract on the unused line was extended by two years. If I need to cancel both to get out of this, so be it but I'd rather not and

I'm paying for 2 smartphone lines when only one is in use. It's a waste of money that I can no longer afford. I would like for someone to present me with options or I will have to seek an alternate service provider.

Ok so now there are presumptions of both my ignorance and my dishonesty. This has become the most surreal conversation I've had in some time. I've been a VZW customer for over 10 years and no, this is not something I've ever done before. In the past, if I wanted a new phone before my 2-year deal was up, I paid full price for the phone and kept living. That's how the system works, right? In this instance, I had two lines on my account, each with different contract end dates. The secondary account was 6 months out-of-contract and unused but, for personal reasons, I kept the line in force. The person who used the account setup another account with VZW with another phone. But I kept the line active, just in case.
In the meantime, when reviewing my account online, I noticed an option on the secondary account of "Transfer upgrade". Given my understanding of the definition of the word "transfer" as well as my previous dealings with VZW phone upgrades, it seemed logical that, since both phones were under the same master account, the upgrade with its requisite contract extension would apply to the line that actually used the upgrade eligibility. It was therefore, my expectation that the primary line would either have two years tacked on to its current end date or, at the very least the contract end date for the primary line would be 2 years out from the date the upgrade was exercised. Both options were acceptable to me since, at that point, I was not considering the termination of my relationship with VZW. I knew I needed a phone with more battery life than the one I had and carrying one of those battery charge packs around wouldn't work for me. So, I clicked the transfer upgrade button on the secondary account. I then saw the primary account show as eligible for an upgrade. At that point, I upgraded the phone on the primary account. There was no point where I was notified of a 2 year extension on the secondary account and, once I clicked the "Transfer upgrade" link, there was no mention of or reference to the secondary account.
I'm not sure of who I'm replying to or where they are from so I cannot speak to the people they encounter on a day to day basis. I have not stated nor do I have any desire to get away with a free early upgrade. It should be noted that we are discussing a discounted upgrade, not a free phone. I still paid $150 for the phone and was happy to do it. However, this idea that I'm trying to circumvent the system is offensive. I'm not trying to get away with anything. As I've said in previous posts, I expected to burn discounted upgrade eligibility on the primary line for a minimum of 2 years. I actually expected the new contract end date to be 3 years away, which would have been more than fair for all concerned. Fairness, it seems, is running in short supply.
If all you have to say is that I'm stupid, ignorant, or dishonest, please don't bother to reply. If you can in some way help to bring this to a satisfactory resolution, I'm all ears. Can you hear me now? Good.

I had this imac 27" two years ago,updated to snow leopard 10.6.8 and suddenly the imac shut down and able to start again from the beggining,i had the leopard 10.5.8 and my problem is i cannot re-installed my snow leopard.Do i have to update my old leopard

I had this imac 27" two years back(leopard 10.5.8) and no problem was encountered so far! (thanks 4that),i always made an update as far to snow leopard 10.6.8. Unfortunately when i did some application /downloading,the system was off and when i turn it On the logo of an apple only came.So what i did is to start all over again,now i am two years old back with Leo-10.5.8,My problem is i cannot install my snow leopard,it reads that i have to clean tha disc which i did and thru utility disc.Any help please and i really appreciate to every1 helping me to solve the problem.I will keep in touch.
Many thanks! - Angel

BTW,I purchased the SL by retail and originally installed for the first time in my IMAC 27" ,unfortunately during the upgrading of the system,suddenly it was totally gray.then off as it killed my imac.i switch it On but only the apple logo came and waiting for so long.I tried to start from the very beginning,installed the DVD installation that was originally came from imac..it works and i have now the latest version of Leopard 10.5.6...then .8 thru updates. My problem is i cannot re-install my SNOW LEOPARD that i purchased from retail store..proceeded to install in my imac but everytime it ends with 'FAILED-pls clean the disc" i did the cleaning but still the same,:installed failed!-The installer could not copy the necessary support file",i tried booting from the disc holding C down but no luck at all. Anybody can help me please. Many thanks ..

What's the best way to transfer everything from my 5-year-old iMac to my 1-year-old iMac?

What's the best way to transfer everything from my 5-year-old iMac to my 1-year-old iMac?
I'm doing role reversal with these two. The newer imac is becoming our business computer, the older one will be our personal computer from now on until it gives out. For the record, I have Carbonite on the business unit. Should be a no-brainer, right? (Which is precisely why I'm asking!)
Thanks for whatever timely and accurate advise you may have.

Thanks. I stumbled across migration assistant later that afternoon in a google search. Just finished using it today to do the deed. Appreciate your quick response!

755p treo...phone's email "gets" messages from two years ago...super old mail...how can I get my newer messages?

I've got a Treo 755p...and I'm happy with it, except email has never worked right. When I connect to my gmail account to "get" messages, all it downloads are 350 messages from the year 2008. I've got to keep downloading, and deleteing 350 messages at a time which are two years old. What can I do with the phone or at gmail to "get" the more recent mail. It seems there must be a way to eliminate these old messages and concentrate on newer messages.
Thanks for the help, I appreciate it and do enjoy the phone. I've got a wireless keyboard coming and that seems like an awesome accessory. Thanks again!!
Post relates to: Treo 755p (Sprint)

I feel your pain. I awoke this morning to check my text messages on my iPhone (I'm away working in Norway) only to notice a text my girlfriend sent over the night. The title bar over the message listed her Italian mobile number instead of her name. I thought that odd, only to realize that virtually all of my contacts have disappeared from the iCloud. Even more strange, there appears to be no order, rhyme nor reason, or any form of sense as to what has been deleted. If this (and a few other issues I have with post-Jobs Apple) is indicative of Apple's trajectory, they're not going to be around long. I'm beyond ******-off over this and I'll be thinking very hard about buying Apple products in the future.

I bought iphone 3gs in sept. 2009 (two year back) without contract from USA. Can it be unlocked official by apple now.

i bought iphone 3gs in sept. 2009 (two year back) without contract from USA. Can it be unlocked official by apple now.

AT&T is NOT giving iPhone 4 unlocked. They are only thru the Apple store and Apple.com. You would need to contact AT&T to ask them but NO ONE have been able to get the iphone unlocked by AT&T. But from this article from AT&T: http://www.att.com/esupport/article.jsp?sid=61097&cv=820#fbid=dUnNnwJXkRI
What is the unlock code for my iPhone?
iPhone cannot be unlocked, even if you are out of contract. If you are traveling internationally, iPhone is a quad-band phone and will work in many countries across the globe. Stay connected while traveling to over 215 countries, plus get discounted rates in over 80 of those countries when you sign up for AT&T World Traveler

Hi, i've just got a problem with my macbook pro: I bought it two years ago and suddenly, it stopped working. Im freaking out. No answer from the people hwo suposed to know about these problems. Any tip??

Help!
i had a problem with my macbook pro: on tuesday 16th (agoust, 2011) I went to a friend's house and show her some document i had in my computer, then i turned off my mac and it asked me: "there are some actualizations available, do you want to update before turn off?" i clicked on yes, waited for update and then the macbook turned off. When I got back home, I tried to turn it on again.... but nothing: it didn't sound baaaammmmm as allways, it didn't reacted. I tried again, but useless.
The next day i went to one of these "authorized management centers", but they coudn't say anything or do anything about it. First they told me the problem was the battery, then the hard disk, then the video card... but don't. I left my mac there by two weeks, hoping they could help me, but they didn't. So I picked it up and go to other place.
The rare thing is that i have just two years with my mac, and i didn't do anything stupid on it (didn't fall, get wet, microwave, hot, shocked, hit or anything) It just stopped working. Two times it turned on. But if not, it's the same story:
When i pushed the button to turn on, sounds like baaaaaammmm, but then again, and again, and again, and the screen doesn't get blue or anything, it appears a foder with a "?" and then the computer turns off...
Im wondering if this is a problem on this computers, because some of my friends told me things much like that that happened with their macbooks.
What's going on??? why this is happening?? cn you help me?

This article may help: A flashing question mark appears when you start your Mac.

What is expected from a two year experience ABAPer

Similar Messages

Maybe you are looking for