What is flex appilcation error in VC?

hi,
please iam facing a problem in VC while deploying my application,the error is *Error in compiling Flex application (1). Consult log file for details*so please frds help me out of this problem
Thanks
KISHORE.

Hi Kishore,
I agree with Parth, you have opened several threads for the same issue. Please discuss a issue in one thread.
Back to your problem, you have to enable the log and also check the VC Wiki.
[https://wiki.sdn.sap.com/wiki/display/VC/ErrorinCompilingFlexApplication|https://wiki.sdn.sap.com/wiki/display/VC/ErrorinCompilingFlexApplication]
[https://wiki.sdn.sap.com/wiki/display/VC/EnableLog|https://wiki.sdn.sap.com/wiki/display/VC/EnableLog]
[https://wiki.sdn.sap.com/wiki/display/VC/EnablingFlexerrormessagesinVisualComposer|https://wiki.sdn.sap.com/wiki/display/VC/EnablingFlexerrormessagesinVisualComposer]
Best Regards,
Marcel

Similar Messages

Flex Builder 3 Launch Flex Project Error

FB3 launch Flex Project Error
quote:
String index out of range:30
what's reason? how do i fix it? Thanks!

quote:
<?xml version="1.0" encoding="utf-8"?>
<mx:Application xmlns:mx="
http://www.adobe.com/2006/mxml"
layout="absolute" width="367" height="227">
<mx:Button x="178" y="10" label="Button"/>
<mx:ComboBox x="10" y="10"></mx:ComboBox>
</mx:Application>
That's code. I can't launch project with debug.
Thank you.

Flex SDK Error

I'm trying to setup the Flex SDK locally (the bugquash event over the weekend
inspired me) and have got everything installed except I'm getting 2 errors after
I import all of the sample projects:
1012: The static attribute may be used only on definitions inside a class.
airframework/airframework/src/mx/core Version.as line 18 1238554510921 1101
and
1012: The static attribute may be used only on definitions inside a class.
rpc/rpc/src/mx/core Version.as line 17 1238554489765 1100
I should be good to go if I can figure out what I'm doing wrong with these 2
things.
This is all that is in those files, but it is the mx_internal static...line that
is causing the issue (in both projects)
import mx.core.mx_internal;
* @private
* Version string for this class.
mx_internal static const VERSION:String = "3.4.0.0";
Any ideas?
Thanks.

<div class=Section1> color:#1F497D'>Your paths look incorrect. Airframework should not have another airframework in it, and doing so probably throws off the include of version.as<o:p></o:p> color:#1F497D'><o:p> </o:p> color:#1F497D'>Alex Harui<o:p></o:p> color:#1F497D'>Flex SDK Developer<o:p></o:p> color:#1F497D'><a href="http://www.adobe.com/">Adobe Systems Inc.</a><o:p></o:p> color:#1F497D'>Blog: <a href="http://blogs.adobe.com/aharui"><span style='color:blue'>http://blogs.adobe.com/aharui</a><o:p></o:p> color:#1F497D'><o:p> </o:p> <div style='border:none;border-top:solid #B5C4DF 1.0pt;padding:3.0pt 0in 0in 0in'> From:<span style='font-size:10.0pt;font-family:"Tahoma","sans-serif"'> Gareth Arch [mailto:[email protected]] Sent: Thursday, April 02, 2009 6:27 PM To: [email protected] Subject: Flex SDK Error<o:p></o:p> </div> <o:p> </o:p> A new discussion was started by Gareth Arch in Developers -- Flex SDK Error I'm trying to setup the Flex SDK locally (the bugquash event over the weekend inspired me) and have got everything installed except I'm getting 2 errors after I import all of the sample projects: 1012: The static attribute may be used only on definitions inside a class. airframework/airframework/src/mx/core Version.as line 18 1238554510921 1101 and 1012: The static attribute may be used only on definitions inside a class. rpc/rpc/src/mx/core Version.as line 17 1238554489765 1100 I should be good to go if I can figure out what I'm doing wrong with these 2 things. This is all that is in those files, but it is the mx_internal static...line that is causing the issue (in both projects) import mx.core.mx_internal; /** <o:p></o:p> · @private <o:p></o:p> · Version string for this class. <o:p></o:p> · / mx_internal static const VERSION:String = "3.4.0.0"; Any ideas? Thanks. <o:p></o:p> <div class=MsoNormal> <hr size=2 width=200 style='width:150.0pt' align=left> </div> View/reply at <a href="http://www.adobeforums.com/webx?13@@.59b87f68">Flex SDK Error</a> Replies by email are OK. Use the <a href="http://www.adobeforums.com/webx?280@@.59b87f68!folder=.3c060fa3">unsubscribe</a> form to cancel your email subscription.<o:p></o:p> </div>

Flex compilation error after adding an additional output port to a query

Hello,
I need to add an additional output port to a query in order to dynamically filter some results. Our version of VC 7.0 (SP16) doesn't support filter components with access to store data.
Just when we add an extra output port to the query and deploy it we run into a flex compilation error.
Has somebody come along with that?
Kind regards
Stefan

Hi
Why exactly you want another output port. With same output port you can drag multiple filters & restrict the output.
Creation of second output port is not required.
If first way is not suitable in your case, then you add that query twice (or multiple times) & pass the same input parameters.
If still it is not serving the purpose then please elaborate your requirement as what dynamic filter you want.
Regards
Sandeep

What Does Flex Installer Check in Eclipse DIR?

I'm using EasyEclipse which is bundled eclipse package and
Flex installer isn't recognizing it even though the directory
structure and file names are the same. it is using 3.1.2 Eclipse
SDK.
So what is flex looking for whenever it installs into an
eclipse folder? The 'plugins' folder and 'features' folder is
there. The file size of eclipse.exe is the same as a traditional
eclipse install. This is the error:
Eclipse 3.1 Not Found
Please choose an existing Eclipse 3.1 (or greater) folder to
be updated.
This folder must contain the standard Eclipse folders named
"plugins" and "features".

I just spent 2 hours on a chat with them... Turns out... He says I have High Speed Internet, I say I have High Speed Internet Enhanced He tells me I should be happy with my speed test, I tell him I should be receiving what I am paying for and it is beneath the 3.1 Mbps to 7.0 Mbps I am paying for. He says the repair service cannot see my account stuff only billing. I insist I am paying for High Speed Enhanced. 2 hours in I am told that Repair is arguing with Billing over what service I have. I tell him Billing will win. He finally calls me direct, and am told to close the chat. I am told I am correct all along and will receive credit to my account for them not giving me the proper speed for years of service I paid for and did not receive. -------- I could not understand half of what he was saying to me. He says he will not e-mail me any information. I have no clue his name because try as I might I could not understand him. He says it will resolve in a few days and they will contact me. This is service? I should now take the word of a company that has underserved me for years, from a guy on the other side of the world who cannot be understood and who is unitelligible over the phone, that won't send me any of the information via e-mail and had me intentionally close the chat session that they will properly resolve this issue.

What could cause "Internal error: java.lang.NullPointerException: can't not add null to SWF frame" when using compc?

using flex sdk 4.6, and air sdk 15.0.0.356
we get the following error when using compc in our ant build:
[java] Internal error: java.lang.NullPointerException: can't not add null to SWF frame
[java] at com.adobe.flash.swf.SWFFrame.addTag(SWFFrame.java:77)
[java] at com.adobe.flash.compiler.internal.units.requests.SWFTagsRequestResult.addToFrame(SWFTagsR equestResult.java:114)
[java] at com.adobe.flash.compiler.internal.targets.SWFTarget.addCompilationUnitsAndDependenciesToF rame(SWFTarget.java:398)
[java] at com.adobe.flash.compiler.internal.targets.SWFTarget$FramesInformation.createFrame(SWFTarg et.java:838)
[java] at com.adobe.flash.compiler.internal.targets.SWFTarget$FramesInformation.createFrames(SWFTar get.java:875)
[java] at com.adobe.flash.compiler.internal.targets.SWFTarget.build(SWFTarget.java:243)
[java] at com.adobe.flash.compiler.internal.targets.SWCTarget.buildLibrarySWF(SWCTarget.java:348)
[java] at com.adobe.flash.compiler.internal.targets.SWCTarget.build(SWCTarget.java:128)
[java] at com.adobe.flash.compiler.clients.COMPC.buildArtifact(COMPC.java:144)
[java] at com.adobe.flash.compiler.clients.MXMLC.compile(MXMLC.java:541)
[java] at com.adobe.flash.compiler.clients.MXMLC.mainNoExit(MXMLC.java:230)
[java] at com.adobe.flash.compiler.clients.MXMLC.mainNoExit(MXMLC.java:184)
[java] at com.adobe.flash.compiler.clients.COMPC.staticMainNoExit(COMPC.java:75)
[java] at com.adobe.flash.compiler.clients.COMPC.main(COMPC.java:62)
which seems to be rather vague, and offers no clue as to what caused the problem. so, my question is, what could cause this error?
these are the compiler options we use in the build file:
<java jar="${flex.compc.jar}" dir="." fork="true" failonerror="true">
 <jvmarg value="-Xmx512m" />
 <arg line="@{options} ${_compc.libpath} ${_compc.externspath} ${_compc.includespath}" />
 <arg value="+flexlib=${flex.frameworks.dir}" />
 <arg value="-load-config=@{config}" />
 <arg value="-source-path=@{src.dir}" />
 <arg value="-include-sources=@{src.dir}" />
 <arg value="-output=@{dest}" />
 <arg value="-swf-version=@{swf.version}"/>
 <arg value="-debug=${flash.debug}"/>
 <arg value="-advanced-telemetry"/>
</java>
assume that the properties resolve to correct values, since all projects (except one) call this task and compile successfully. the error must come from this one project that fails, but we don't know why.
any ideas?

You could be running out of memory, try increasing the -Xmx512m value to -Xmx1024m or another value that you prefer

Getting "IPSEC(epa_des_crypt): decrypted packet failed SA identity check" messages on packets from only one of two far-end sources sharing the same tunnel, the other source works fine. What exactly does this error mean?

One computer at COMPANY-A is attempting to communicate with two
computers located at COMPANY-B, via an IPsec tunnel between the
two companies.
All communications are via TCP protocol.
All devices present public IP addresses to one another, although they
may have RFC 1918 addresses on other interfaces, and NAT may be in use
on the COMPANY-B side. (NAT is not being used on the COMPANY-A side.)
The players:(Note: first three octets have been changed for security reasons)
COMPANY-A computer      1.2.3.161
COMPANY-A router        1.2.3.8 (also IPsec peer)
COMPANY-A has 1.2.3.0/24 with no subnetting.
COMPANY-B router        4.5.6.228 (also IPsec peer)
COMPANY-B computer #1   4.5.7.94 (this one has no issues)
COMPANY-B computer #2   4.5.7.29 (this one fails)
COMPANY-B has 4.5.6.0/23 subnetted in various ways.
COMPANY-B also has 9.10.11.0/24, but it is not involved in the issue.
What works:
The COMPANY-A computer 1.2.3.161 can communicate via the single IPsec
tunnel to COMPANY-B computer #1 4.5.7.94 without problems.
The "show crypto session detail" command shows Inbound/Outbound packets
flowing in the dec'ed and enc'ed positions.
What doesn't:
When the COMPANY-A computer 1.2.3.161 attempts to communicate
via the single IPsec tunnel with the COMPANY-B computer #2 4.5.7.29,
the COMPANY-A router eventually reports five of these messages:
Oct 9 15:24:54.327: IPSEC(epa_des_crypt): decrypted packet failed SA identity check
Oct 9 15:24:57.327: IPSEC(epa_des_crypt): decrypted packet failed SA identity check
Oct 9 15:25:03.327: IPSEC(epa_des_crypt): decrypted packet failed SA identity check
Oct 9 15:25:15.328: IPSEC(epa_des_crypt): decrypted packet failed SA identity check
Oct 9 15:25:39.329: IPSEC(epa_des_crypt): decrypted packet failed SA identity check
Oct 9 15:26:27.328: IPSEC(epa_des_crypt): decrypted packet failed SA identity check
and the "show crypto session detail" shows inbound packets being dropped.
The COMPANY-A computer that opens the TCP connection never gets past the
SYN_SENT phase of the TCP connection whan trying to communicate with the
COMPANY-B computer #2, and the repeated error messages are the retries of
the SYN packet.
On the COMPANY-A side, this IPsec configuration has been set up on a 3745,
a 3725, and some 76xx routers were tried, all with similar behavior,
with packets from one far-end computer passing fine, and packets from
another far-end computer in the same netblock passing through the same
IPsec tunnel failing with the "failed SA identity" error.
The COMPANY-A computer directs all packets headed to COMPANY-B via the
COMPANY-A router at 1.2.3.8 with this set of route settings:
netstat -r -n
Kernel IP routing table
Destination     Gateway         Genmask         Flags   MSS Window irtt Iface
4.5.7.0         1.2.3.8         255.255.255.0   UG        0 0          0 eth3
1.2.3.8.0       0.0.0.0         255.255.255.0   U         0 0          0 eth3
10.1.0.0        0.0.0.0         255.255.240.0   U         0 0          0 eth0
169.254.0.0     0.0.0.0         255.255.0.0     U         0 0          0 eth3
10.0.0.0        10.1.1.1        255.0.0.0       UG        0 0          0 eth0
0.0.0.0         1.2.3.1         0.0.0.0         UG        0 0          0 eth3
The first route line shown is selected for access to both COMPANY-B computers.
The COMPANY-A router (IPsec tunnel endpoint, 1.2.3.8) has this
configuration:
crypto isakmp policy 10
encr 3des
authentication pre-share
group 2
lifetime 28800
crypto isakmp key XXXXXXXXXXXXXXXXXXXXXXX address 4.5.6.228
crypto ipsec security-association lifetime seconds 86400
crypto ipsec transform-set COMPANY-B01 esp-3des esp-sha-hmac
crypto map COMPANY-BMAP1 10 ipsec-isakmp
description COMPANY-B VPN
set peer 4.5.6.228
set transform-set COMPANY-B01
set pfs group2
match address 190
interface FastEthernet0/0
ip address 1.2.3.8 255.255.255.0
no ip redirects
ip virtual-reassembly
duplex auto
speed auto
no cdp enable
crypto map COMPANY-BMAP1
ip forward-protocol nd
ip route 0.0.0.0 0.0.0.0 1.2.3.1
ip route 10.0.0.0 255.0.0.0 10.1.1.1
ip route 1.2.3.8.0 255.255.255.0 FastEthernet0/0
access-list 190 permit ip host 1.2.3.161 4.5.7.0 0.0.0.255
access-list 190 permit ip host 1.2.3.161 9.10.11.0 0.0.0.255
bridge 1 protocol ieee
One of the routers tried had this IOS/hardware configuration:
Cisco IOS Software, 3700 Software (C3725-ADVIPSERVICESK9-M), Version 12.4(25c),
RELEASE SOFTWARE (fc2)
isco 3725 (R7000) processor (revision 0.1) with 115712K/15360K bytes of memory.
Processor board ID XXXXXXXXXXXXXXX
R7000 CPU at 240MHz, Implementation 39, Rev 3.3, 256KB L2 Cache
2 FastEthernet interfaces
4 ATM interfaces
DRAM configuration is 64 bits wide with parity disabled.
55K bytes of NVRAM.
31296K bytes of ATA System CompactFlash (Read/Write)
250368K bytes of ATA Slot0 CompactFlash (Read/Write)
Configuration register is 0x2102
#show crypto sess
Crypto session current status
Interface: FastEthernet0/0
Session status: UP-ACTIVE
Peer: 4.5.6.228 port 500
IKE SA: local 1.2.3.8/500 remote 4.5.6.228/500 Active
IPSEC FLOW: permit ip host 1.2.3.161 4.5.7.0/255.255.255.0
        Active SAs: 2, origin: crypto map
IPSEC FLOW: permit ip host 1.2.3.161 9.10.11.0/255.255.255.0
        Active SAs: 0, origin: crypto map
#show crypto sess det
Crypto session current status
Code: C - IKE Configuration mode, D - Dead Peer Detection
K - Keepalives, N - NAT-traversal, X - IKE Extended Authentication
Interface: FastEthernet0/0
Session status: UP-ACTIVE
Peer: 4.5.6.228 port 500 fvrf: (none) ivrf: (none)
      Phase1_id: 4.5.6.228
      Desc: (none)
IKE SA: local 1.2.3.8/500 remote 4.5.6.228/500 Active
          Capabilities:(none) connid:1 lifetime:06:26:27
IPSEC FLOW: permit ip host 1.2.3.161 4.5.7.0/255.255.255.0
        Active SAs: 2, origin: crypto map
        Inbound: #pkts dec'ed 651 drop 16 life (KB/Sec) 4496182/23178
        Outbound: #pkts enc'ed 574 drop 2 life (KB/Sec) 4496279/23178
IPSEC FLOW: permit ip host 1.2.3.161 9.10.11.0/255.255.255.0
        Active SAs: 0, origin: crypto map
        Inbound: #pkts dec'ed 0 drop 0 life (KB/Sec) 0/0
        Outbound: #pkts enc'ed 0 drop 0 life (KB/Sec) 0/0
The COMPANY-B device on their end of the IPsec VPN is a Juniper SSG1000
Version 6.1 (ScreenOS)
We only have a limited view into the Juniper device configuration.
What we were allowed to see was:
COMPANY-B-ROUTER(M)-> sh config | incl COMPANY-A
set address "Untrust" "oss-COMPANY-A-1.2.3.161" 1.2.3.161 255.255.255.255
set ike gateway "COMPANY-A-1-GW" address 1.2.3.8 Main outgoing-interface "ethernet2/1" preshare xxxxxxxxxxxxxxxxxxxxxx proposal "pre-g2-3des-sha"
set vpn "COMPANY-A-1-IKE" gateway "COMPANY-A-1-GW" no-replay tunnel idletime 0 proposal "g2-esp-3des-sha-28800"
set policy id 2539 from "Untrust" to "Trust" "oss-COMPANY-A-1.2.3.161" "9.10.11.0-24" "ANY" tunnel vpn "COMPANY-A-1-IKE" id 0x309a pair-policy 2500
set policy id 2500 from "Trust" to "Untrust" "9.10.11.0-24" "oss-COMPANY-A-1.2.3.161" "ANY" tunnel vpn "COMPANY-A-1-IKE" id 0x309a pair-policy 2539
set policy id 2541 from "Trust" to "Untrust" "4.5.7.0-24" "oss-COMPANY-A-1.2.3.161" "ANY" tunnel vpn "COMPANY-A-1-IKE" id 0x309b pair-policy 2540
set policy id 2540 from "Untrust" to "Trust" "oss-COMPANY-A-1.2.3.161" "4.5.7.0-24" "ANY" tunnel vpn "COMPANY-A-1-IKE" id 0x309b pair-policy 2541
COMPANY-B-ROUTER(M)->
I suspect that this curious issue is due to a configuration setting on the
Juniper device, but neither party has seen this error before. COMPANY-B
operates thousands of IPsec VPNs and they report that this is a new error
for them too. The behavior that allows traffic from one IP address to
work and traffic from another to end up getting this error is also unique.
As only the Cisco side emits any error message at all, this is the only
clue we have as to what is going on, even if this isn't actually an IOS
problem.
What we are looking for is a description of exactly what the Cisco
IOS error message:
IPSEC(epa_des_crypt): decrypted packet failed SA identity check
is complaining about, and if there are any known causes of the behavior
described that occur when running IPsec between Cisco IOS and a Juniper
SSG device. Google reports many other incidents of the same error
message (but not the "I like that IP address but hate this one" behavior),
and not just with a Juniper device on the COMPANY-B end, but for those cases,
not one was found where the solution was described.
It is hoped that with a better explanation of the error message
and any known issues with Juniper configuration settings causing
this error, we can have COMPANY-B make adjustments to their device.
Or, if there is a setting change needed on the COMPANY-A router,
that can also be implemented.
Thanks in advance for your time in reading this, and any ideas.

Hello Harish,
It is believed that:
COMPANY-B computer #1   4.5.7.94 (this one has no issues)
COMPANY-B computer #2   4.5.7.29 (this one fails)
both have at least two network interfaces, one with a public IP address
(which we are supposedly conversing with) and one with a RFC 1918 type
address.   COMPANY-B is reluctant to disclose details of their network or
servers setup, so this is not 100% certain.
Because of that uncertainty, it occurred to me that perhaps COMPANY-B
computer #2 might be incorrectly routing via the RFC 1918 interface.
In theory, such packets should have been blocked by the access-list on both
COMPANY-A router, and should not have even made it into the IPsec VPN
if the Juniper access settings work as it appears they should. So I turned up
debugging on COMPANY-A router so that I could see the encrypted and
decrypted packet hex dumps.
I then hand-disassembled the decoded ACK packet IP header received just
prior to the "decrypted packet failed SA check" error being emitted and
found the expected source and destination IP addresses (4.5.7.29 and 1.2.3.161),
in the unecapsulated packet. I also found the expected port numbers of the TCP
conversation that was trying to be established in the TCP header. So, it
looks like COMPANY-B computer #2 is emitting the packets out the right
interface.
The IP packet header of the encrypted packet showed the IP addresses of the
two routers at each terminus of the IPsec VPN, but since I don't know what triggers
the "SA check" error message or what it is complaining about, I don't know what
other clues to look for in the packet dumps.
As to your second question, "can you check whether both encapsulation and
decapsulation happening in 'show crypto ipsec sa'",   the enc'ed/dec'ed
counters were both going up by the correct quantities. When communicating
with the uncooperative COMPANY-B computer #2, you would also see the
received Drop increment for each packet decrypted. When communicating
with the working COMPANY-B computer #1, the Drop counters would not
increment, and the enc'ed/dec'ed would both increment.
#show crypto sess det
Crypto session current status
Code: C - IKE Configuration mode, D - Dead Peer Detection
K - Keepalives, N - NAT-traversal, X - IKE Extended Authentication
Interface: FastEthernet0/0
Session status: UP-ACTIVE
Peer: 4.5.6.228 port 500 fvrf: (none) ivrf: (none)
      Phase1_id: 4.5.6.228
      Desc: (none)
IKE SA: local 1.2.3.8/500 remote 4.5.6.228/500 Active
          Capabilities:(none) connid:1 lifetime:07:59:54
IPSEC FLOW: permit ip host 1.2.3.161 4.5.7.0/255.255.255.0
        Active SAs: 2, origin: crypto map
        Inbound: #pkts dec'ed 376 drop 5 life (KB/Sec) 4458308/28784
        Outbound: #pkts enc'ed 401 drop 3 life (KB/Sec) 4458308/28784
Attempt a TCP communication to COMPANY-B computer #2...
show crypto sess det
Crypto session current status
Code: C - IKE Configuration mode, D - Dead Peer Detection
K - Keepalives, N - NAT-traversal, X - IKE Extended Authentication
Interface: FastEthernet0/0
Session status: UP-ACTIVE
Peer: 4.5.6.228 port 500 fvrf: (none) ivrf: (none)
      Phase1_id: 4.5.6.228
      Desc: (none)
IKE SA: local 1.2.3.8/500 remote 4.5.6.228/500 Active
          Capabilities:(none) connid:1 lifetime:07:59:23
IPSEC FLOW: permit ip host 1.2.3.161 4.5.7.0/255.255.255.0
        Active SAs: 2, origin: crypto map
        Inbound: #pkts dec'ed 376 drop 6 life (KB/Sec) 4458307/28753
        Outbound: #pkts enc'ed 402 drop 3 life (KB/Sec) 4458307/28753
Note Inbound "drop" changed from 5 to 6. (I didn't let it sit for all
the retries.)
#show crypto ipsec sa
interface: FastEthernet0/0
    Crypto map tag: COMPANY-BMAP1, local addr 1.2.3.8
   protected vrf: (none)
   local ident (addr/mask/prot/port): (1.2.3.161/255.255.255.255/0/0)
   remote ident (addr/mask/prot/port): (4.5.7.0/255.255.255.0/0/0)
   current_peer 4.5.6.228 port 500
     PERMIT, flags={origin_is_acl,}
    #pkts encaps: 402, #pkts encrypt: 402, #pkts digest: 402
    #pkts decaps: 376, #pkts decrypt: 376, #pkts verify: 376
    #pkts compressed: 0, #pkts decompressed: 0
    #pkts not compressed: 0, #pkts compr. failed: 0
    #pkts not decompressed: 0, #pkts decompress failed: 0
    #send errors 3, #recv errors 6
     local crypto endpt.: 1.2.3.8, remote crypto endpt.: 4.5.6.228
     path mtu 1500, ip mtu 1500, ip mtu idb FastEthernet0/0
     current outbound spi: 0xDF2CC59C(3744253340)
inbound esp sas:
      spi: 0xD9D2EBBB(3654478779)
        transform: esp-3des esp-sha-hmac ,
        in use settings ={Tunnel, }
        conn id: 2004, flow_id: SW:4, crypto map: COMPANY-BMAP1
        sa timing: remaining key lifetime (k/sec): (4458307/28600)
        IV size: 8 bytes
        replay detection support: Y
        Status: ACTIVE
     inbound ah sas:
     inbound pcp sas:
     outbound esp sas:
      spi: 0xDF2CC59C(3744253340)
        transform: esp-3des esp-sha-hmac ,
        in use settings ={Tunnel, }
        conn id: 2003, flow_id: SW:3, crypto map: COMPANY-BMAP1
        sa timing: remaining key lifetime (k/sec): (4458307/28600)
        IV size: 8 bytes
        replay detection support: Y
        Status: ACTIVE
     outbound ah sas:
     outbound pcp sas:
The "send" errors appear to be related to the tunnel reverting to a
DOWN state after periods of inactivity, and you appear to get one
each time the tunnel has to be re-negotiated and returned to
an ACTIVE state. There is no relationship between Send errors
incrementing and working/non-working TCP conversations to the
two COMPANY-B servers.
Thanks for pondering this very odd behavior.

Can anyone tell me what apple hardware test error code apple hardware 4MOT/4/40000002: Exhaust-1153 or 1209 means? I am running a MacBook Pro.

Can anyone tell me what apple hardware test error code apple hardware 4MOT/4/40000002: Exhaust-1153 or 1209 means? I am running a MacBook Pro

The motor on the exhaust fan has failed or is failing.

Flex compilation error

Hi All,
I am getting flex compilation error when i deploy the models which were developed in older version7.0, now it is 7.01.I am getting the following error in 7.01 version.
Flex2Compiler.Build: Error in executing a process for Flex compilation: /usr/sap/BWD/DVEBMGS30/j2ee/cluster/server0/GUIMachine_Business_Packages/[KCRXK59]MyModels.SMIScoreCard/FLEX_COMPILATION_FOLDER/AAD583.mxml
Does the older version models doesnot deploy in new versions?
Thanks
Srinivas K

Hello Srinivas,
Currently i am also facing the same issue , Can you let us know were you able to solve the problem u encountered , if yes how?
Thanks and Regards,
Ronniee

Flex compilation error 1004

Compilation is ok, but the deployment is giving this error messages:
Error in executing a process for Flex compilation, Error 1004: Operator '%' must be followed by an operand
      (D:usrsapJ2EJC01j2eeclusterserverGUIMachine_Business_PackagesTest_59674FLEX_COMPILATION_FOLEDRAAD8G.mxml:154)
Error 1004: Operator '%' must be followed by an operand
      (D:usrsapJ2EJC01j2eeclusterserverGUIMachine_Business_PackagesTest_59674FLEX_COMPILATION_FOLEDRAAD8G.mxml:154)
Error 1004: Operator '%' must be followed by an operand
      (D:usrsapJ2EJC01j2eeclusterserverGUIMachine_Business_PackagesTest_59674FLEX_COMPILATION_FOLEDRAAD8G.mxml:154)
Error 1033: ')' expected
      (D:usrsapJ2EJC01j2eeclusterserverGUIMachine_Business_PackagesTest_59674FLEX_COMPILATION_FOLEDRAAD8G.mxml:154)
Error 1033: ')' expected
      (D:usrsapJ2EJC01j2eeclusterserverGUIMachine_Business_PackagesTest_59674FLEX_COMPILATION_FOLEDRAAD8G.mxml:154)
Failed to compile AAD8G.mxml
I do not succeed in finding the cause of this error

Compilation is ok, but the deployment is giving this error messages:
Error in compiling Flex application: Error 1004: Operator '=' must be followed by an operand
      (/usr/sap/NW7/DVEBMGS00/j2ee/cluster/server0/GUIMachine_Business_Packages/Poc_59929/FLEX_COMPILATION_FOLDER/AADHE1_P.mxml:374)
Error 1142: The class 'vc.custom.SkinAssetDependency' could not be loaded.
      (/usr/sap/NW7/DVEBMGS00/j2ee/cluster/server0/GUIMachine_Business_Packages/Poc__59929/FLEX_COMPILATION_FOLDER/AADHDR.mxml)
Failed to compile AADHDR.mxml
Edited by: Rafael Ovidio on Feb 15, 2008 10:28 AM

Flex compilation error: line exceeds 32k span

Hi All,
I am trying to execute my application being developed in VC7.0 (nw04s sneak preview version) using tabbed layers. I have 3 layers and has the following UI components
1 tab/layer: input form
2 tab/layer: table control
3 tab/layer: table control
Following is the error from the source Viewer window
com.myComp.myProduct.8J.Empdetailsview
Error in executing a process for Flex compilation, Error: Branch between 8421 and 41193 around line 0 exceeds 32K span. If possible, please refactor this component.
(E:\usr\sap\J2E\JC01\j2ee\cluster\server0\GUIMachine_Business_Packages\empModel_18608\FLEX_COMPILATION_FOLEDR\AAD8J-generated.as:2188)
Error: Branch between 8421 and 41193 around line 0 exceeds 32K span.
Failed to compile AAD8J.mxml
PS: Initially I had a table and chart controls in my second layer (no 3rd layer then) and got the same error however, after removing the chart contrl, the app begun to run.
Now I added a 3rd layer which has one table contrl only and now the app is not working. I also have eventing between my layers..
Please help
Thanks
Sathish

Hi
The 32k issue id pretty hard to get rid of once it starts, instead of using the 3rd layer, try and create a nested iview, you can also try and use a nested iview for each layer, this is a bit more complicated to do but does seem to workaround the 32k problem.
Jarrod

What does the "conversion error" I get when converting a pdf file to Microsoft word?

What is the "conversion error" I get when converfting a pdf file to aMicrosoft word?

Adobe reader with export to PDF
Sent from my iPhone 5
Marty Kennedy

What are the common error while EBS installation in Unix /windows

what are the common error while EBS R12 installation with os unix and windows.
oracle have any any check after installation all installation are correct according to no of directory, files and file size ?
regards

Hi user;
what are the common error while EBS R12 installation with os unix and windows.AFAIK there is no document which show common error.There are some common error for installation like:
RW-5004- RW-50010 etc.
For error we have to check instalaltion log files for can get more details about it
oracle have any any check after installation all installation are correct according to no of directory, files and file size ?Oracle has 2 checking mechanisim during installation.
1. Before start installation, rapidwiz makes Validate system Configuration check which is checking port avaliability,file system check etc.
2. End of the installation,rapidwiz makes Validate system Configuration again to check jsp,dbc file, db avaliablity etc..
For more details Please check:
For r12.1.1:
http://download.oracle.com/docs/cd/B53825_01/current/html/docset.html
For r12:
http://download.oracle.com/docs/cd/B40089_10/current/html/docset.html
Hope it helps
Regard
Helios

What is the 0x80070570 error when installing Win7 or Win8 or Win 8.1 on a clean SSD/HDD ?!

Hello,
My computer was working perfectly with Win7 for about 2years until I formatted on monday to clean a little bit my drives ... Since then I'm unable to install windows again. I have the 0x80070570 error.
The complete error message is:
Windows cannot install required files. The file may be corrupt or missing. Make sure that all files required for installation are available and restart the installation. Error code:0x80070570.
What is the 0x80070570 error when installing Win7 or Win8 or Win 8.1 on a clean SSD/HDD ?! These versions are full from MSDN.
What I did already:
check my RAM (16go gskill)
remove unnecessary hard drives
replace my "old" SSD with a clean new one
remove my sound cards
remove the mouse and use only keyboard
reset the BIOS
check every LED on the motherboard (asus sabertooth z77) and there is no problem
What are the problems?
Thanks,
Adrien.

Hi,
If all images cannot be installed, we have a reason to suspect the hardware cause.
If you use two memory slots to get 16G RAM, I suggest you test with just one (8G) to check the result.
Alex Zhao
TechNet Community Support

Error in executing the program,what can be the error

Error in executing the program.
What can be the error ,if the error shown is PROGRAM ABC DOE! after entering the values in selection screen?

Hi,
Use find to search globally for message in the program.
Check the message that is handled in the program in the selection screen validations.Double click and find out the message.Then you can easily trace why it's happening.

What is flex appilcation error in VC?

Similar Messages

Maybe you are looking for