What is idmManager view attribute to update manager in IDM

We are on IDM6.0 sp1 and using
User.waveset.idmManager attribute to update manager of a particular user.
<set name='User.waveset.idmManager'>
<ref>managerId</ref>
</set>
However I dont see these changes in IDM when I look the user.
Also tried User.account[Lighthouse].idmManager
<set name='User.accounts[Lighthouse].idmManager'>
<ref>managerId</ref>
</set>
Am I using the right attribute or is there any bug assigned for idmManager???

Hi,
I am using v8,1 and are using *accounts[Lighthouse].idmManager* with no issues observed.
If you populate the manager via the GUI and then checkout the user via netbeans you will be able to obtain the correct systax for idmManager

Similar Messages

What is the easy way to update Managed Metadata field multi select values using client object model C#?

The below mentioned code works sometimes and doesn't most of the time. What is the real best way to update multi select managed metadata fields?
Microsoft.SharePoint.Client.File file = site.GetFileByServerRelativeUrl("/sites/myspsite/Documents/Presentation2.pptx");
clientContext.Load(file);
clientContext.ExecuteQuery();
ListItem currentItem = file.ListItemAllFields;
clientContext.Load(currentItem);
clientContext.ExecuteQuery();
currentItem["Country"] = "-1;#India|1d13cfe9-d6f4-4bd3-a6c7-4b46a81f2a96;#-1;#China|9c1dff73-82db-44b1-8d70-f4258dd24e47;#-1;#USA|b9295c0b-67d4-4dc5-99d4-e88af888de48";
currentItem["Title"] = "Demo Doc";
currentItem.Update();
clientContext.ExecuteQuery();
file.CheckIn("test check-in", CheckinType.MajorCheckIn);
clientContext.ExecuteQuery();
Anuradha!!

Hi,
Here are two blog for your reference:
How to Work with Managed Metadata Columns by Using the SharePoint Client Object Model
http://blogs.msdn.com/b/sharepointdev/archive/2011/11/18/how-to-work-with-managed-metadata-columns-by-using-the-sharepoint-client-object-model-kaushalendra-kumar.aspx
SharePoint 2010 Code Tips – Setting a Managed Metadata Field with the Client Object Model
http://sharepointfieldnotes.blogspot.com/2011/08/sharepoint-2010-code-tips-setting.html
Best Regards
Dennis Guo
TechNet Community Support

Update manager in IdM automatically when the manager changes in SAP HR

Hi Experts
I have been given a requirement where the manager of a user in IdM should be updated automatically when the manager changes in SAP HR.
The HR extraction job is currently in place and runs every 30mins.
Please could you give me some ideas on how to implement this.
IDM 7.2 SP 6
Thanks
Ran

Hi Deepak
I have been discussing this a bit more in detail with the client. So, the issue is as follows
When a new/replacement manager is hired
When people are moved from one org unit to another
The scheduled extraction job (RPLDAP_EXTRACT_IDM with a variant with the delta tick on) does not update the new manager info in IDM for the relevant users who report to that manager. The client has to run the program (RPLDAP_EXTRACT_IDM with a variant with the delta tick off) manually each time for the affected users which updates the manager info successfully in idm.
I investigated the query LDAP_IDM_QUERY from user group /SAPQUERY/L1 and want to know if the below should be ticked as well. Your thoughts please?
Please advise.
Thanks
Ranjit

What is meant by criteria of Updateability in MDM Import manager

Hi,
What is meant by criteria of Updateability in MDM Import manager? i read some information, but i could understand, it says original data source be updateble. what is meant by Original data source.?
what is the use of option "Read-only" in Import manager logon screen.
Thanks

Hello Ankam,
You can check the Read-only option to prevent MDM from updating your data source.
Kindly see the below information on "DATA SOURCE UPDATES"
DATA SOURCE UPDATES
Some MDM Import Manager operations require that the original data source be updateable, thereby allowing new fields and/or entire new tables u2013 and the corresponding data values for each record u2013 to be automatically added to the data source before further processing.
Other operations simply create virtual fields in the MDM Import Manageru2019s workspace, although if the data source happens to be updateable, some of these operations instead add the new fields to the original data source as well.
NOTE ►► Updating the data source when possible allows you to
perform additional operations on the new fields as if they were part of
the original source data, and also use them as record matching fields.
NOTE ►► Fields that are added only if the data source is updateable
can be deleted automatically by the MDM Import Manager when you
exit or switch data sources based on the setting of the Delete Created
Fields on Exit configuration option.
Updateable Data Sources
Whether or not a data source is updateable depends upon the following:
u2022 Source type. The source Type must permit the MDM Import Manager to update its schema and insert the additional fields of data; some supported types are updateable and some are not.
u2022 Media. The media on which the data source resides must itself be updateable. If the media on which the data source resides is readonly, such as a CD-ROM, the data source cannot be updated.
u2022 Permissions. You must have the proper file system permissions to update the file, or the proper DBMS permissions to update the schema of the database.
u2022 Read-only option. You cannot have checked the Read-Only option, which prevents MDM from updating the data source even if the other conditions would otherwise permit it.
NOTE ►► The Read-Only option is: (1) enabled for source types that
can be updated (Access, Oracle, SQL Server, and XML); (2) disabled
and unchecked for those that use Access as an updateable staging
area (Delimited Text and Fixed Text); and (3) disabled and checked for
those that cannot be updated (Excel and ODBC).
NOTE ►► When the data source is SQL Server, the table names in
the database must not contain spaces; otherwise any operation that
would update the data source will fail.
Hope this helps.
Regards,
Vikas

What is wrong with Adobe Update Manager???!!!

Why in heaven's name can't Adobe fix their broken Update Manager?! Once again, the Update manager tells me that I have updates available, but the information is completely bogus. Two updates are listed: Photoshop CS5 12.0.4 and Illustrator CS5 15.0.2. The problem is that I am already running Photoshop 12.0.5 and Illustrator 15.0.2.
Is it really too much to ask that the Update Manager for this very expensive software work properly???!!!

I appreciate your reply, Steve. But it sounds like you're saying that the way to fix the Update Manager's whacko behavior is to tell it not to check for Photoshop CS5 updates. But that's its job! Still sounds broken to me. I understand that the 12.0.5 security update was issued "outside the AUM framework", but why do it that was if it was going to confound users?
For me, the same thing is still happening today—not just with Photoshop CS5, but also with Illustrator CS5. AUM tells me that the 15.0.2 update is available, but I am already running Illustrator 15.0.2.
It's not a temporary hassle, it's a permanent hassle because the AUM clearly cannot be trusted. It means that the only reliable way to update any of my CS5 apps is to manually go to the Adobe website and drill down to the relevant section for each CS5 app individually. This is shoddy customer service at its finest.

How to update managed iPads (COMPLETE)

Here is my very short summary of what needs to be done to update the apps and iOS on managed iPads in the mobile cart. As you can see, this is very brief and concise, and you can do the update process in just a few minutes each day.
Ha hah ha, that was a good joke, eh?
No, the truth is that you must be prepared to be frustrated and annoyed, wasting possibly hours of your time on this learning the process, and finding this all to be way too complicated and difficult and annoying.
Updating the supervised iPads one at a time, is only just slightly less difficult than updating all of them, all at once, in parallel using the USB hubs in the cart.
Sorry, but there doesn't seem to be any simpler way to do this. This is what all schools that use managed iPads have to deal with.
The iMac admin account is "@@@@@@@@@@@@@@@@@"
I have set the admin account password to "###########"
Please inform me of any password changes.
1. System software / iTunes / QuickTime update:
Turn on Mac, logon as administrator
Go to the Apple menu (top left corner)
Choose "Software update…"
Install any updates it finds, restart the computer if needed.
2. Apple Configurator (iPad manager) update
Go to the Apple menu (top left corner)
Choose "App Store…"
Look across top of window, far right says "Updates"
If there is a number next to it, click on Update, then click the Update button.
App Store update account: @@@@@@@@@@@@@@@@@@@
Password: #######################
Restart computer if needed.
3. Updates for iPad Apps
On the dock (move mouse to bottom center of screen)
Run iTunes
Select Library -> Apps on left side
In dark gray band below app icons, look for a message like "Updates available"
If yes, click arrow next to updates message.
Top right of window, select "Download all free updates"
Quit iTunes
4. Updates for iPad iOS (operating system)
On the dock (move mouse to bottom center of screen)
Run Apple Configurator
At top of window choose Supervise
In left column select "Cart - 30 iPads"
"All iPads (xx)" should be shown in middle column
In right column "Settings" should be highlighted already next to iOS.
Click button "Check for Update"
5. Updates for Apple Configurator iPad Apps
(Should do this section if any updates were downloaded in iTunes)
Continuing from section #4 above:
In right column click on "Apps"
Click on + at bottom of Apps list. A file browser window appears.
At top of file browser window, 4th item from left should be selected, for "List view with details"
The "Date modified" column should be highlighted. If not, click on it.
Under "Mobile Applications" click on top program name in list, note in modified column it says "Today"
Scroll down until you find the last item updated "Today"
Hold down the Shift key and click on the last item. That and everything above is now selected.
Click Open button on window
Logon with management account:
U: **************************
P: ##########################
In bottom left corner it will say "Updating…"
For every program that was updated, a window will pop up that says "Item exists, do you want to replace it?" and you have to keep clicking Update over and over and over until all the Updates are done.
The Update button moves around depending on window size, so you can't just leave the mouse in one spot to hit all the Replace buttons.
Click the Apply button at the bottom center of the Apple Configurator window
6. Updating all the supervised iPads at once
You are now ready to connect the iPads and Apple Configurator will automatically install the latest iOS version, and the latest iPad app versions.
If Apple Configurator is not already running:
- On the dock (move mouse to bottom center of screen)
- Run Apple Configurator
- At top of window choose Supervise
- In left column select "Cart - 30 iPads"
If the iPad cart has cable trays that can slide, open the back of the cart so they are able to slide backwards. Otherwise if not, make sure there is enough slack to plug in an iPad and insert it backwards with the cable and plug to the rear.
Flip all the iPads over in the cart, so the "top edge" with the power button is exposed. This allows you to power on the iPads during the update, explained in the section below.
On the back of the cart, unplug all iPad cords from the white Apple power bricks, and plug into open ports on the USB hubs
Plug the USB cable from the cart into the back of the iMac
Wait for the iPads to be recognized by the iMac, about a minute or so. They should start to automatically update.
It will take a while for each iPad to download any iOS updates and install apps, maybe 30-45 minutes.
!! UPDATE CAN FAIL IF YOU AREN'T VIGILANT !!
When you see an iPad listed as "restoring backup" (after about 30 minutes), you must check the iPad to see if its screen is black. If it is black, you must reach over and press the power button for that iPad about 2-3 seconds, or the restore will FAIL.
You have to sit there and periodically watch for any iPad that says it is "restoring backup". The iPad shows a spinning timer, then the Apple logo, and the screen goes black. This is where you must manually turn on the iPad, or the process fails and you will have to start over for that iPad.
You have a couple minutes to turn on the iPad after it says "restoring backup", but there is no notification at all when Apple Configurator shifts from "Installing Apps" (30+ min) to "Restoring Backup". So you just have to sit there, and wait, and watch.
Once all the iPads have been updated, you need to unplug all of them from the USB hubs and back into the Apple charging bricks. This is because the USB hubs shut down and will not charge the iPads, if they are not always connected to the iMac, which is in a stationary location in the elementary library.
7. Dealing with passcodes on iPads
Some iPads will inexplicably fail to update, with error messages such as "could not apply policy". These usually have passcodes installed by students.
There is no way to simply remove the passcode and keep on using the iPad. It is necessary to completely erase the device and all data on it, reinstalling the operating system and all programs.
There is no way to disable the passcode or prevent students from setting a passcode.
A partial solution is for me to set a passcode, set the device auto-lock time to never, and staff must unlock the iPads themselves before handing the devices out to students. Students must not be told this passcode, or they can again change it and lock the device.
So, to remove a passcode, first look at the device in the supervised group list. Select it and copy the name of the device to the clipboard, or write it down.
Right click on the device and choose Unsupervise. It will be erased and rebooted, which takes about 30 minutes. It then appears on the leftmost Prepare section for setting up new devices.
Set this device to be Supervised, enter the name you copied previously, tell it to update the iOS, apply the Student security profile, and use the most recent backup (I've added dates to the backup names).
On the Apps tab, select all apps (checkmark next to everything).
Click Apply
Setting up for supervision takes an additional 30-45 minutes, and you will need to wait for it to say "restoring backup", at which point you need to manually power on the iPad as discussed previously, or this whole process fails and you will have to start over.
Yep, that's all it takes! As you can see, it should be a piece of cake to learn to do this, right?

Hi TanPart,
I have changed the code which you have give in order to get the files from SharePoint 2010 Foundation Document Library.But i am getting below error in powershell.
Property 'ListItemCollectionPosition' cannot be found on this object; make sure it exists and is settable.
Could you tell me which is the issues in it?
See the code below.
$web = Get-SPWeb http://ntmoss2010:9090/Site
$list = $web.Lists["DocLib"]
$query = New-Object Microsoft.SharePoint.SPQuery
$query.ViewAttributes = "Scope='Recursive'";
$query.RowLimit = 2000
$caml = '<Where><Contains><FieldRef Name="Title" /><Value Type="Text">Process Documents/Delivery</Value></Contains></Where>' +
        '<OrderBy Override="TRUE"><FieldRef Name="ID"/></OrderBy>'
$query.Query = $caml
do
    $listItems = $list.GetItems($query)
    $spQuery.ListItemCollectionPosition = $listItems.ListItemCollectionPosition
    foreach($item in $listItems)
        #Cast to SPListItem to avoid ambiguous overload error
        $spItem = [Microsoft.SharePoint.SPListItem]$item;
        Write-Host $spItem.Title
while ($spQuery.ListItemCollectionPosition -ne $null)
Thanks & Regards
Poomani Sankaran

How to get view attribute old value

Hello,
I have an update page which has a view object associate with, I first execute query to display view attribute value on the page, then I edit the page, and before saving to database, I want to compare row attribute value before editting and the one after editting. row.getAttributeName("attributeName") always returns whatever value currently on the screen.
Is there any method that allows me to get old row attribute value, the value comes from database?
thanks
Lei

Lei,
If you are concerned only about a couple of attributes, then you can manage with a separate copy of the data. But if the data is in bulk, better leave it to pl/sql side of validation.
--Shiv

Validation based on view attributes

JDeveloper 11.1.1.x
What is the best practice to create validations based on a view attribute from a view object that is of a level higher in the hierarchy?
For example:
     * Use the departments and employees tables from the hr schema.
     * Create an EO for only the employees table, so not for the department table
     * Create VO's for both tables. You should create the Viewlink manually between both views.
     * In the query for the department, add a calculated field in the query.
     For example : availableSalary : 100000 - (select sum(salary) from employees where department_id = Departments.DEPARTMENT_ID) availableSalary
     * I would like to add a validation on the salary field of the employee EO, that says that the new value shouldn't be bigger then the availableSalary field
     Be aware : that when changing an existing salary, only the difference between the old and new salary should be taken into account
     (This removes the "Compare with View Object Attribute" possibility :-()
     * I also want to use some fields from the departments view in my error message on the salary field of the employees EO.
How can we best tackle these requirements ?
Thank you in advance.
Filip Huysmans.

Filip,
I think you are trying to avoid the lesser cost of a Department Entity by an extremely expensive way to get to the comparison done. Firstly, you wire a view instance with an entity, which is strange as there is no association between the entity and the View Object. So all you would have is to access a method in the AM Impl method that looks up the VO and returns the current row's information you need. This AM method can be referenced from the entity object using groovy to perform the comparison (you see that even this is kind of awkward as it connects the entity to the AM, producing a tight coupling that makes any of your code reviewers shake heads in disbelieve). Assuming the update of the VO updates the entity (Departments EO you don't have), you could follow an association using Groovy to perform the validation (which I think sounds easier to do (though by the small cost of creating an EO)
Btw.:
if you have a ViewLink defined then the transient attribute can be easier calculated using Groovy
10000 - DetailTargeName.sum('Salary');
I would think its less expensive then running a SQL query for each department Id
Frank

What are the endpoints attributes collected by NAC Profiler through SNMP and DHCP?

Hi Everyone,
Please help on this.
I want to know what are the endpoints attributes collected by NAC Profiler to discover and profile the endpoints.through SNMP protocol and DHCP protocol.
Also if anybody can explain a simple used case on this.
Please guide me on this.
Thanks in advance.
Thanks,
Abuzar.

Hi,
SNMP
=====
NetMap queries network devices via SNMP for:
System information
Interface information
Bridge information
802.1X information (PAE MIB)
Routing/IP information
CDP MIB Information
This information is used to Build and maintain a model of the network topology and endpoint discovery.
NetMap uses SNMP Get, GetNext and GetBulk (when available) requests to query the SNMP agents running on the network infrastructure devices to gather specific Management Information Base (MIB) objects about their status based on device type (Layer 2 or Layer 3).
In addition to polling each network device for all MIB data at a regular interval, NetMap may also be commanded to poll port-specific information when the NAC Profiler system is notified that an endpoint has joined or left the network via SNMP traps sent by devices at the network edge, switches typically.
Upon receipt and verification of a link state (link up, link down) or MAC notification trap, NetTrap will notify the NAC Profiler Server that a change has occurred on the network edge (endpoint joined or left a network port). If the trapping device is in the NAC Profiler configuration, the NetMap component module assigned to poll the device that sent the trap will be commanded by the Server module to initiate a poll of the device's port information to determine the change to the endpoint topology that resulted in the trap being sent by the network device.
The information gathered by NetMap is processed by the Server accordingly to update the network topology, noting the endpoint joining or leaving a port. Note that NetMap SNMP polling of network devices resulting from a trap is localized to the port specified in the trap. This is unlike the regular polling that occurs at the frequency specified for each device type (L2 and L3) which gathers all SNMP information from the device used by the NAC Profiler system.
DHCP:
=====
The NetWatch module listens for traffic including DHCP traffic.
The module will collect all the DHCP information on the traffic collected, like mac address, ip address, DHCP Vendor Class Identifier in DHCP request, host name in DHCP request, requested specified options in DHCP request (option 55) and full list of DHCP options supported by the DHCP client as specified in the DHCP request.
All the endpointe data can then be used to map endpoints with profiles.
HTH,
Tiago
If this helps you and/or answers your question please mark the question as "answered" and/or rate it, so other users can easily find it.

Error "A web exception has occurred during file upload" when trying to import ESXi image file into Update Manager

I'm encountering this error and not sure how to fix, I'm quite new to vCenter so please bear with me.
I'm trying out vCenter 5.1 with Update Manager 5.1 right now. No license key has been entered and I still have 50 odd days to try it out.
2 ESXi hosts are being managed by this vCenter, and they're both running ESXi 4.0
I'm looking to use Update Manager to try to upgrade the ESXi 4.0 hosts to ESXi 5.1
I downloaded the image file VMware-VIMSetup-all-5.1.0-799735.iso from VMWare website, and is looking to import it using the Update Manager so I can update the ESXi hosts, but I keep on getting the error:
File name: VMware-VIMSetup-all-5.1.0-799735.iso
Failed to transfer data
Error was: A web exception has occurred during file upload
I tried importing it by using vSphere client to connect to vCenter server both remotely and locally, with firewall disabled.
I've read http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=1026602
I've disabled firewall, and there is no anti-virus program on the server. I've also restarted the machine several times, to no avail, I didn't reinstall update manager because the whole Windows and VCenter installations are clean from scratch.
I logged into the vSphere Client using Active Directory credentials, and I've made all Domain Admins (which my account is a member of) part of the administrator group on the vCenter server. I can't log in using admin@System-Domain because it tells me I don't have permissions for it, I still haven't really had the chance to figure out why that is and not sure if that makes a difference.
Also, I'm fairly certain I'm using the right image file, as I've burned some DVD's used that image file to upgrade some other ESXi hosts. Unless there's a special image file I need to download?
I'm at lost on what I can do to make it work. Please advise.
Thanks.

The ISO file you mentioned is the one for vCenter Server. What you need is the "VMware-VMvisor-Installer-5.1.0-799733.x86_64.iso" (or VMware-VMvisor-Installer-201210001-838463.x86_64.iso) for the ESXi host.
André

Java does not work at all upon using the update manager to update to firefox 3.6.10 for Ubuntu 9.0.4

OS: Ubuntu 9.0.4
Browser: Firefox 3.6.10
upon updating to firefox 3.6.10, java does not work at all.
websites that use java do not work at all anymore, when they worked just fine before the updating thru update manager. e.g. hulu website cannot play any of the shows.
i can give the folder of bookmarked pages i tried.
how to do that on here, i've yet to see if possible.
i can even give saved text from the terminal concerning certain attempts.
when i updated thru update manager, it gave some weird java plugin that wasn't there before "The IcedTea Web Browser Plugin IcedTea6 Java Web Browser Plugin (execution of applets on webpages)".
i uninstalled this as instructed by an answer found in one of the pages i saved, cuz it was conflicting w/another java program the updater said i needed. right now, i don't remember for sure what it was. it perhaps was realplayer flash or Java itself. w/all the hours/days of searching i put in, it's difficult if not downright impossible for me to remember all the specifics of what i tried.
i've searched throughout many webpages (including many searches on mozilla, ubuntu, java, etc) for instruction in fixing the problem.
oh, and incidentally, on the Java site, when i try the verify test of Java, firefox pops up with that yellow bar right below the slew of tabbed website windows, giving the statement "additional plugins are required to display all the media on this page. (w/link to) install missing plugins ." which is what i do, go thru the requesting plugin installation. it comes up with, guess what, the IcedTea Java Plugin. i click on the 'next' in the "Plugin Finder Service" box that pops up, & all it gives me is "No plugins were installed. IcedTea ...Plugin failed. and the link 'find out more about plugins or manually find missing plugins'". the link takes me to some of the very things/plugins that wouldn't install in the first place. the Java test failure is a LOL funny, as what plugin it is saying is required (IcedTea) is a recommended alternate program to display the very test in the first place.
i followed the given instructions on those many searched pages, in every case (barring what i may have just plain missed), but to no avail.
i've even gone to the point of trying to reinstall the previous 3.5.13 firefox version, from mozilla site. even that wouldn't install.
i've tried installing Java for my sys direct from it's site. nada.
now it's time for me to post the problem & perhaps someone will come up with some kind of "dummy" way to fix it.
until then many sites a regularly use are totally useless to me on this fast puter.
the only way i can get to use such sites, are two choices: 1. use a dinosaur laptop, which is slower than molasses & cannot handle to any streaming stuff, or 2. use an available internet access puter at the library. but useage for ea person per day is limited to only one hour a day. and one can end up waiting for an hour or more ( in the busiest periods) to even get to use one.
so, is there anyone at all, who knows any for-sure working fix for this problem?
thanks muchly :^D
p.s. i can't pay anybody any money for such help, as is required in certain sites (e.g. Java website), cuz i don't have any.
i can pay in labor tho, if there is someway to find someone who can physically be at this puter w/me, taking me step-by-step
sorry for the 20-pg essay. i hope it was all clearly understood. if, not, well, clear communication is always what is needed, ask away.

Your above posted system details show outdated plugin(s) with known security and stability risks.
*Shockwave Flash 9.0 r999
Update the [[Managing the Flash plugin|Flash]] plugin to the latest version.
*http://www.adobe.com/software/flash/about/
In Firefox 3.6 and later versions you need the Next-Generation Java™ Plug-In present in Java 6 U10 and later (Linux: libnpjp2.so; Windows: npjp2.dll).
http://java.com/en/download/faq/firefox_newplugin.xml
See also http://java.sun.com/javase/6/webnotes/install/jre/manual-plugin-install-linux.html

Remote Update Manager with AAMEE 2.1 deployments.

Hi,
I've noticed the AAMEE 3.1 Beta has some new options that integrate with Remote Update Manager and CS6 installation packages, that allows you disable updates, but still run them with Remote Update Manager. If I've deployed and Adobe CS5.5 package built with AAMEE 2.1, with the ability to install updates disabled, will I still be able to use Remote Update Manager to install updates to those deployments? Or will I need to continue to deploy them manually? If I want to deploy CS5.5 and use Remote Update Manager for updates, what settings should I be using in AAMEE 2.1 when I build my packages?
Thanks,
~Ted

Hi Ted,
RUM can also be used with CS5 & CS5.5 and by the sounds of it would fit in with your current configuration very well. If user's are non admins or you do not want each client pulling in there updates automatically then we would suggest turning off client updates in AAMEE and then using RUM.
Have you looked at setting up AUSST in your environment ? it is great to use in conjunction with RUM but you can of course just use RUM if you prefer.
Cheers
Karl
CS Enterprise Systems Engineer

Remote Update Manager does not exit

I'm trying to use Remote Update Manager to update PCs in our domain, but RemoteUpdateManager.exe does not exit, it just hangs. The log looks like this
11/04/14 15:19:27:374 | [INFO] | | AAMEE | Utilities | RemoteUpdateManager | | | 2164 | ##################################################
11/04/14 15:19:27:374 | [INFO] | | AAMEE | Utilities | RemoteUpdateManager | | | 2164 | ##################################################
11/04/14 15:19:27:374 | [INFO] | | AAMEE | Utilities | RemoteUpdateManager | | | 2164 | Launching the RemoteUpdateManager...
11/04/14 15:19:27:374 | [INFO] | | AAMEE | Utilities | RemoteUpdateManager | | | 2164 | RemoteUpdateManager version is : 1.7.0.25 (BuildVersion: 1.6; BuildDate: Tue Sep 02 2014 07:02:05 )
11/04/14 15:19:27:374 | [INFO] | | AAMEE | Utilities | RemoteUpdateManager | | | 2164 | **************************************************
11/04/14 15:19:27:374 | [INFO] | | AAMEE | Utilities | RemoteUpdateManager | | | 2164 | Initializing UpdaterCore Library...
11/04/14 15:19:27:484 | [INFO] | | AAMEE | Utilities | RemoteUpdateManager | | | 2164 | UpdaterCore library initialized successfully.
11/04/14 15:19:27:484 | [INFO] | | AAMEE | Utilities | RemoteUpdateManager | | | 2164 | **************************************************
11/04/14 15:19:27:484 | [INFO] | | AAMEE | Utilities | RemoteUpdateManager | | | 2164 | Starting UpdaterCore CheckForUpdate...
11/04/14 15:19:29:730 | [INFO] | | AAMEE | Utilities | RemoteUpdateManager | | | 2164 | CheckForUpdates completed successfully.
11/04/14 15:19:29:730 | [INFO] | | AAMEE | Utilities | RemoteUpdateManager | | | 2164 | **************************************************
11/04/14 15:19:29:730 | [INFO] | | AAMEE | Utilities | RemoteUpdateManager | | | 2164 | Starting UpdaterCore DownloadUpdates...
11/04/14 15:19:29:730 | [WARN] | | AAMEE | Utilities | RemoteUpdateManager | | | 2164 | No new applicable Updates. Seems like all products are up-to-date.
11/04/14 15:19:29:730 | [INFO] | | AAMEE | Utilities | RemoteUpdateManager | | | 2164 | **************************************************
What I'm not getting is the "Ending the RemoteUpdateManager Return Code (0)" part.
I'm using the latest AAMEE.
Are there any further things I can do to see why this is happening?

It seems to be related to the new Creative Cloud Packager (version 1.7).
All the packs I had made with 1.5 exited correctectly.
All the packs I have make with 1.7 dont exit.
And it seems to be impossible to go back to 1.5 ....
I think the problem might be with this line (from uob_csis but I get the exact same):
RemoteUpdateManager version is : 1.7.0.25 (BuildVersion: 1.6; BuildDate: Tue Sep 02 2014 07:02:05 )
There seems to be an incoherence between the version and the buildversion.

New to solaris---is update manager working correctly?

well as my subject says I am new to solaris having put it on an pc bout a week ago. as I am using the "free" verson (not open solaris) I knew I would not be entitled to certain goodies but seem to have run into an issue getting the updates I (presumably) am entitled to. simply put I open up the solaris application "update manager" which is on my desktop saying "updates available". now upon initially launching the app I specified that I was using the free version (well it let me register without a code so I assume sun knows my status), and then selected the option to put a check mark next to all available updates. well after waiting like a full day with it showing that is was still in the process up updating I eventually aborted the process. I then tried installing a couple of the updates and though it took a while it worked. so I selected 3 of 4 more and again the update manager showed that I was updating but nothing was happening (to my knowledge). after several hours I aborted the app again. so what am I doing wrong. first off I am assuming that what sun presents to me is what is actually available to me using the free unregistered version of solaris. why then would updates fail? btw I know some linux (not an expert) and I figured that behind the scenes update manager was checking for dependencies and installing what I needed from sun repos. but of course I could be way off bass here. so what gives? thanks much in advance.

first off I am assuming that what sun presents to me is what is actually available to me using the free unregistered version of solaris.No. Update Manager will show you everything but will only allow you to install basically security and a small subset of other patches.
When you ran through the Solaris registration GUI you had a chance to enter a support contract #. If you chose not to enter one or if you want to use it without registering then you only get access to a few of the patches.
alan

Error while installing NWDS CE 7.1 during update manager stage

Hi,
I have downloaded the EHP 1 for SAP NetWeaver Developer Studio (NWDS) 7.1 setup and trying to install.
But when the update manager is trying to download all features i get the following errors.
Unable to complete action for feature "SAP NetWeaver Developer Studio Java EE" due to errors.
Unable to complete action for feature "SAP NetWeaver Developer Studio Facades" due to errors.
Execution failed! Commmand: "msiexec.exe /norestart /qb /i librfc32.msi /lvx C:\DOCUME1\tuser\Local Settings\Temp\com.sap.netweaver.developerstudio.facades_librfc32.msi_install_standard.log ALLUSERS=2 REBOOT=ReallySuppress". Exit value: "1639". Working directory: "D:\nwds\IDE\eclipse\features\com.sap.netweaver.developerstudio.facades_7.1.0.081107100357". Log file: "C:\DOCUME1\tuser\Local Settings\Temp\com.sap.netweaver.developerstudio.facades_librfc32.msi_install_standard.log".
    Execution failed! Commmand: "msiexec.exe /norestart /qb /i librfc32.msi /lvx C:\DOCUME1\tuser\Local Settings\Temp\com.sap.netweaver.developerstudio.facades_librfc32.msi_install_standard.log ALLUSERS=2 REBOOT=ReallySuppress". Exit value: "1639". Working directory: "D:\nwds\IDE\eclipse\features\com.sap.netweaver.developerstudio.facades_7.1.0.081107100357". Log file: "C:\DOCUME1\tuser\Local Settings\Temp\com.sap.netweaver.developerstudio.facades_librfc32.msi_install_standard.log".
Unable to complete action for feature "SAP NetWeaver Developer Studio Facades" due to errors.
    Execution failed! Commmand: "msiexec.exe /norestart /qb /i librfc32.msi /lvx C:\DOCUME1\tuser\Local Settings\Temp\com.sap.netweaver.developerstudio.facades_librfc32.msi_install_standard.log ALLUSERS=2 REBOOT=ReallySuppress". Exit value: "1639". Working directory: "D:\nwds\IDE\eclipse\features\com.sap.netweaver.developerstudio.facades_7.1.0.081107100357". Log file: "C:\DOCUME1\tuser\Local Settings\Temp\com.sap.netweaver.developerstudio.facades_librfc32.msi_install_standard.log".
    Execution failed! Commmand: "msiexec.exe /norestart /qb /i librfc32.msi /lvx C:\DOCUME1\tuser\Local Settings\Temp\com.sap.netweaver.developerstudio.facades_librfc32.msi_install_standard.log ALLUSERS=2 REBOOT=ReallySuppress". Exit value: "1639". Working directory: "D:\nwds\IDE\eclipse\features\com.sap.netweaver.developerstudio.facades_7.1.0.081107100357". Log file: "C:\DOCUME1\tuser\Local Settings\Temp\com.sap.netweaver.developerstudio.facades_librfc32.msi_install_standard.log".
Execution failed! Commmand: "msiexec.exe /norestart /qb /i librfc32.msi /lvx C:\DOCUME1\tuser\Local Settings\Temp\com.sap.netweaver.developerstudio.facades_librfc32.msi_install_standard.log ALLUSERS=2 REBOOT=ReallySuppress". Exit value: "1639". Working directory: "D:\nwds\IDE\eclipse\features\com.sap.netweaver.developerstudio.facades_7.1.0.081107100357". Log file: "C:\DOCUME1\tuser\Local Settings\Temp\com.sap.netweaver.developerstudio.facades_librfc32.msi_install_standard.log".
Any clue what this is about.I have crossed the feature verification step also. My jave environment is also as per required.
regards
Bharat

Hi
CE EHP 7.1 NWDS knows as BPM doesn't come with installtion as with 7.0 .just double click on splash screen (inside the installation folder)
two thing are mandatory here
1. JDK 1.5 installed in system .
2. In configuration file of the folder (inside the installation folder)put the address of where JDK_1.5 is installed.
Best Regards
Satish Kumar

What is idmManager view attribute to update manager in IDM

Similar Messages

Maybe you are looking for