What is it mean 48.1% - 14,149 ms - 3 hot spot inv. direct JVM call

When we were profiling we saw this entry..48.1% - 14,149 ms - 3 hot spot inv. direct JVM call.It came under weblogic.thread.run
is the time taken by weblogic thread taken to invoke Some application specific classes?

The jvm crashed on me only once and it was due to font problems...
In the program, I was doing something like that:
label.setText("<html><b>some text</b></html>");Anyway, later I found out that I had corrupted fonts. I removed them and it worked.
I know this doesn't help much, but it's a start...

Similar Messages

After entering the network password (WAP2 Personal), I get (-3906) error. What does that mean? I can I solve the problem?

After entering the network password (WAP2 Personal), I get (-3906) error. What does that mean? I can I solve the problem?

I had to call my bank. They were aware of the problem with online banking and Firefox 4 and they were able to make adjustments at their end. I now have online access again.

I keep getting these errors on my IPSec output, what does it mean?

Hi, I keep getting these errors on my IPSec output, what does it mean and does the other parts look ok?
mtree says we have SA but couldn't find current outbound SA. dropping pak. pak->cryptoflags=0x820
This is on a Cisco 877 DSL router that I'm trying to configure to a Cisco ASA server.
Apr 9 08:05:00.579: IPSEC(crypto_map_check_encrypt_core): mtree says we have SA but couldn't find current outbound SA. dropping pak. pak->cryptoflags=0x820
Apr 9 08:05:00.579: IPSEC(crypto_map_check_encrypt_core): mtree says we have SA but couldn't find current outbound SA. dropping pak. pak->cryptoflags=0x820
Apr 9 08:05:07.483: ISAKMP:(1011): retransmitting phase 2 QM_IDLE -1129044802 ...
Apr 9 08:05:07.483: ISAKMP (0:1011): incrementing error counter on node, attempt 2 of 5: retransmit phase 2
Apr 9 08:05:07.483: ISAKMP (0:1011): incrementing error counter on sa, attempt 1 of 5: retransmit phase 2
Apr 9 08:05:07.483: ISAKMP:(1011): retransmitting phase 2 -1129044802 QM_IDLE
Apr 9 08:05:07.483: ISAKMP:(1011): sending packet to 80.71.156.64 my_port 500 peer_port 500 (R) QM_IDLE
Apr 9 08:05:07.483: ISAKMP:(1011): retransmitting phase 2 QM_IDLE 589395199 ...
Apr 9 08:05:07.483: ISAKMP (0:1011): incrementing error counter on node, attempt 5 of 5: retransmit phase 2
Apr 9 08:05:07.483: ISAKMP (0:1011): incrementing error counter on sa, attempt 2 of 5: retransmit phase 2
Apr 9 08:05:07.483: ISAKMP:(1011): retransmitting phase 2 589395199 QM_IDLE
Apr 9 08:05:07.483: ISAKMP:(1011): sending packet to 80.71.156.64 my_port 500 peer_port 500 (R) QM_IDLE
Apr 9 08:05:07.515: ISAKMP (0:1011): received packet from 80.71.156.64 dport 500 sport 500 Global (R) QM_IDLE
Apr 9 08:05:07.515: ISAKMP: set new node 1754770008 to QM_IDLE
Apr 9 08:05:07.519: ISAKMP:(1011): processing HASH payload. message ID = 1754770008
Apr 9 08:05:07.519: ISAKMP:(1011): processing NOTIFY PROPOSAL_NOT_CHOSEN protocol 3
spi 0, message ID = 1754770008, sa = 82E60C84
Apr 9 08:05:07.519: ISAKMP:(1011):deleting node 1754770008 error FALSE reason "Informational (in) state 1"
Apr 9 08:05:07.519: ISAKMP:(1011):Input = IKE_MESG_FROM_PEER, IKE_INFO_NOTIFY
Apr 9 08:05:07.519: ISAKMP:(1011):Old State = IKE_P1_COMPLETE New State = IKE_P1_COMPLETE
Apr 9 08:05:18.323: IPSEC(sa_request): ,
(key eng. msg.) OUTBOUND local= 80.149.110.103, remote= 80.71.156.64,
local_proxy= 172.19.15.0/255.255.255.0/0/0 (type=4),
remote_proxy= 0.0.0.0/0.0.0.0/0/0 (type=4),
protocol= ESP, transform= NONE (Tunnel),
lifedur= 3600s and 4608000kb,
spi= 0xC976D068(3380007016), conn_id= 0, keysize= 256, flags= 0x0

It may be peer initiates IPSec SA pair, and again duplicate IPSec SA pairs are established, so better you clear crypto and reenabel it.

I bought the iPhone 4s and my battery used to reach 32% and then the phone would shut off. Then it reached 46% and the same thing happens, and now it shuts off at 53%. And it start recharging from the percentage it shut off at. What does this mean?

What does this mean?

My iphone 4s just developed a similar problem. Ultimately, after a visit to the Genius Bar at which I was offered a replacement phone for $149, I took the phone to a non-Apple repair shop which diagnosed the problem as tarnished pins in the docking connector and replaced the connector for $49.
The symptoms I experienced were that the phone would not pull a charge. I tried different cables, wall outlet versus computer USB connection, etc. The screen stayed black until I depressed the sleep button, at which time the red battery / lightening bolt symbol would flash three times and then the screen would go black.
If your battery is dead, that icon will not show up at all. If you get the icon, it means your battery is run down and needs to recharge, but the defective docking connector is preventing the battery from taking the charge.

What does this mean:Photoshop 13.1.2 for Creative Cloud Installation failed. Error Code: U44M1P7

What does this mean:Photoshop 13.1.2 for Creative Cloud Installation failed. Error Code: U44M1P7
I found the manual update, which worked!
http://www.adobe.com/support/downloads/thankyou.jsp?ftpID=5595&fileID= 5604

Hi Barbara,
For failed 13.1.2 update error U44M1P7, Please refer to the solution mentioned in the following threads :
http://forums.adobe.com/message/5396792#5396792
http://forums.adobe.com/message/5409050#5409050

What is the meaning of the black line in the Layer 2 View?

In the layer 2 View,there are many black line indicate "Ethernet 100M",what is the meaning?Does it mean the device is an end device that connected PC only?

Since there has been no response to your post, it appears to be either too complex or too rare an issue for other forum members to assist you. If you don't get a suitable response to your post, you may wish to review our resources at the online Technical Assistance Center (http://www.cisco.com/tac) or speak with a TAC engineer. You can open a TAC case online at http://www.cisco.com/tac/caseopen
If anyone else in the forum has some advice, please reply to this thread.
Thank you for posting.

Downloads from itunes fail - error code 8003 - what does that mean, or more importantly, how do I get what I paid for?

Downloads from itunes fail - error code 8003 - what does that mean, or more importantly, how do I get what I paid for?

Try the troubleshooting for that error code on this page : iTunes: Advanced iTunes Store troubleshooting - Apple Support (search for '8003' on the page, it's just below half-way down)

GetResponseCode() returns -1,what does it mean

Hi ,
The HttpURLConnection class's getResponseCode() method returns -1.
getResponseMessage() returns null.i m accessing my servlet through a proxy.i know only about 1xx to 5xx codes.i dont know what does it mean by -1.But at server side the request is properly sent and processed and i m getting 200 and ok after processing at serverside. the object is sent to client also. but it is not received by the client.
Null object is returned.I think proxy is the culprit.If anyone can help me what -1 means,it will be really greatfull to diagnoise my issue in detail and solve my problem soon.
Your help will be greatfull.
Thanks
prakash

As it says perfectly clearly, right there in the API documentation for the method:
"Returns -1 if no code can be discerned from the response (i.e., the response is not valid HTTP)."

Apple TV does not work after trying to update software. Main light keeps blinking and on the screen shows itunes icon and a usb cable. What does that means?

My Apple TV does not work after trying to install the new software update. The main light keeps blinking rapidly and on the screen it shows the itunes icon and a USB cable. What does that mean?

The Apple TV is in recovery mode. Try to restore the Apple TV. Follow the link for instructions on the restore process.
http://support.apple.com/kb/HT4367

I have an early 2011 MacBook Pro which has been running slow for a while. After looking at responses to similar problems I have downloaded and run EtreCheck and will post the output. Please can someone help me with what it all means.Thanks in advance

I have an early 2011 MacBook Pro which has been running slow for a while. After looking at responses to similar problems I have downloaded and run EtreCheck. Please can someone help me with what it all means.
Thanks in advance.
EtreCheck version: 1.9.15 (52)
Report generated 19 September 2014 08:07:14 GMT+8
Hardware Information: ?
MacBook Pro (13-inch, Early 2011) (Verified)
MacBook Pro - model: MacBookPro8,1
1 2.3 GHz Intel Core i5 CPU: 2 cores
4 GB RAM
Video Information: ?
Intel HD Graphics 3000 - VRAM: 384 MB
Color LCD 1280 x 800
System Software: ?
OS X 10.9.4 (13E28) - Uptime: 0 days 0:4:29
Disk Information: ?
Hitachi HTS545032B9A302 disk0 : (320.07 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted>: 209.7 MB
Macintosh HD (disk0s2) / [Startup]: 319.21 GB (147 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
MATSHITADVD-R   UJ-898
USB Information: ?
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Computer, Inc. IR Receiver
Thunderbolt Information: ?
Apple Inc. thunderbolt_bus
Gatekeeper: ?
Mac App Store and identified developers
Kernel Extensions: ?
[not loaded] com.seagate.driver.PowSecDriverCore (5.2.4 - SDK 10.4) Support
[not loaded] com.seagate.driver.PowSecLeafDriver_10_4 (5.2.4 - SDK 10.4) Support
[not loaded] com.seagate.driver.PowSecLeafDriver_10_5 (5.2.4 - SDK 10.5) Support
[not loaded] com.seagate.driver.SeagateDriveIcons (5.2.4 - SDK 10.4) Support
[loaded] com.sophos.kext.sav (9.1.55 - SDK 10.7) Support
[loaded] com.sophos.nke.swi (9.1.50 - SDK 10.8) Support
Launch Daemons: ?
[loaded] com.adobe.fpsaud.plist Support
[loaded] com.microsoft.office.licensing.helper.plist Support
[running] com.sophos.autoupdate.plist Support
[running] com.sophos.configuration.plist Support
[running] com.sophos.intercheck.plist Support
[running] com.sophos.notification.plist Support
[running] com.sophos.scan.plist Support
[running] com.sophos.sxld.plist Support
[running] com.sophos.webd.plist Support
[running] com.trusteer.rooks.rooksd.plist Support
Launch Agents: ?
[loaded] com.divx.dms.agent.plist Support
[loaded] com.divx.update.agent.plist Support
[running] com.sophos.uiserver.plist Support
[running] com.trusteer.rapport.rapportd.plist Support
User Launch Agents: ?
[loaded] com.adobe.ARM.[...].plist Support
[running] com.amazon.music.plist Support
[loaded] com.google.keystone.agent.plist Support
[not loaded] jp.co.canon.Inkjet_Extended_Survey_Agent.plist Support
User Login Items: ?
iTunesHelper
TomTomHOMERunner
AdobeResourceSynchronizer
Dropbox
Internet Plug-ins: ?
FlashPlayer-10.6: Version: 15.0.0.152 - SDK 10.6 Support
DivX Web Player: Version: 3.2.1.977 - SDK 10.6 Support
AdobePDFViewerNPAPI: Version: 11.0.09 - SDK 10.6 Support
AdobePDFViewer: Version: 11.0.09 - SDK 10.6 Support
Flash Player: Version: 15.0.0.152 - SDK 10.6 Support
EPPEX Plugin: Version: 10.0 Support
Default Browser: Version: 537 - SDK 10.9
OVSHelper: Version: 1.1 Support
QuickTime Plugin: Version: 7.7.3
SharePointBrowserPlugin: Version: 14.4.4 - SDK 10.6 Support
iPhotoPhotocast: Version: 7.0 - SDK 10.7
Safari Extensions: ?
Ultimate
Audio Plug-ins: ?
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 2.0 - SDK 10.9
AppleAVBAudio: Version: 203.2 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins: ?
Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
3rd Party Preference Panes: ?
Flash Player Support
Perian Support
Trusteer Endpoint Protection Support
Time Machine: ?
Skip System Files: NO
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 297.29 GB Disk used: 160.38 GB
Destinations:
Data [Network] (Last used)
Total size: 2 TB
Total number of backups: 99
Oldest backup: 2012-04-20 17:05:32 +0000
Last backup: 2014-09-18 23:49:25 +0000
Size of backup disk: Excellent
Backup size 2 TB > (Disk size 297.29 GB X 3)
Time Machine details may not be accurate.
All volumes being backed up may not be listed.
Top Processes by CPU: ?
      6% InterCheck
      5% iCalExternalSync
      3% WindowServer
      2% CalendarAgent
      2% SystemUIServer
Top Processes by Memory: ?
152 MB SophosScanD
147 MB InterCheck
106 MB SophosAntiVirus
66 MB Dropbox
57 MB com.apple.iTunesLibraryService
Virtual Memory Information: ?
161 MB Free RAM
1.55 GB Active RAM
1.41 GB Inactive RAM
902 MB Wired RAM
611 MB Page-ins
0 B Page-outs

Uninstall Trusteer software
http://www.trusteer.com/support/uninstalling-rapport-mac-os-x
Remove Sophos
https://discussions.apple.com/message/21069437#21069437

HT1657 I rented movies on my iPad, they all downloaded, but when I click 'play' it says 'The requested URL was not found on this server'. What does it mean and how can I restore my rented movies?

I rented movies on my iPad, they all downloaded, but when I click 'play' it says 'The requested URL was not found on this server'. What does it mean and how can I restore my rented movies?

See this previous discussion:
https://discussions.apple.com/message/16962474#16962474

Why has my monitor suddenly begun to have a moiré pattern all over – it is even showing up on my icons on the dock? It appears to be very thin bright green vertical lines. I have a 2008 iMac which is running 10.6.8. What does this mean?

Why has my monitor suddenly begun to have a moiré pattern all over – it is even showing up on my icons on the dock? It appears to be very thin bright green vertical lines. I have a 2007 iMac which is running 10.6.8. What does this mean? I've attached some screen shots below.
Also experiencing some funky issues with my wireless keyboard. With new batteries, it will just stop functioning. Certain keys intermittently won't work. Also the fans go on as soon as I turn the computer on - some times they stay on and sometimes they don't. Ever since upgrading the operating system - I've been having many issues with this iMac. Not happy. Any answers out there?

Thanks for your reply LexSchellings, There is no disc in the drive and I went through the suggestions you put forward on the phone with Apple support without any luck. I can put a disc in but it pops straight back out again without registering on finder.
The idea of using an external drive was to enable me to avoid the cost and loss of productivity whilst machine in repair... if I have to take it in to get the old drive removed than I might as well have a new internal drive put in, although I do worry about the reliability of these apple drives given my experience with this one coupled with my limited online research ... on line forums seem to be full of people with the same problem (although perhaps searching such forums is bound to make it seem a common problem as users with perfectly working machines are less likely to post (?)) Your reply suggests that no external drive will work whilst the existing drive is in place.
As a postscript: I do realise that this is a user forum ...my secondary question was asking if anyone knows how to put forward a case/complaint to Apple... I can't find a link on the support page that would enable me to do so and I was wondering if anyone on this user forum had any ideas/experience..

When trying to update my IPad apps I am getting the message "Your Apple ID has been disabled". Still have more than 50$ in my account, so what does this mean ? What can I do to get my ID enabled again ?

when I am trying to download IPad updates I get the message "Your Apple ID has been disabled". What does this mean? How do I get my ID enabled again? Still got more than 50$ in my account !

Reset your Apple ID password here > Apple - My Apple ID
More information here > Apple ID: "This Apple ID has been disabled for security reasons" appears

I'm trying to upgrade to Mountain Lion and I get an error message that says "server error during download; 403 forbidden. What does this mean, what can I do? I had no problem downloading Lion.

Trying to upgrad to Mountail Lion and got an error message : 403 Forbidden. What does this mean? What can I do? I had no problem when I upgraded to Lion.

403 Forbidden HTTP status code in response to a request from a client for a web page or resource to indicate that the server refuses to allow the requested action. In other words, the server can be reached, but the server declined to allow the requested access.
http://en.wikipedia.org/wiki/HTTP_403
Could you be using a different Apple ID oe such?

TS1424 When I click to play my songs in the library they will not play and show a circle with an exclamation point in the middle of it, what does that mean and how can I get them to play?

When I click to pay my songs in the library they will not play and it shows a circle with an exclamation point within it. What does that mean, how do I fix it, and how will it play my songs again? They used to play before on my Iphone4 with no problem, but since I upgraded to the Iphone4s there is an issue.

I am having the same problem. I have just tried this. Unplug iphone > open itunes > delete all music from itunes library > close itunes > re-open itunes > add music from original folder > plug in iphone > select songs > press sync > unplug iphone using eject button onscreen > checked phone .... still nothing in music folder on phone. On itunes the "On this iphone" tab the songs remain there but greyed out.

What is it mean 48.1% - 14,149 ms - 3 hot spot inv. direct JVM call

Similar Messages

Maybe you are looking for