What is meant by "an ee sits in one company and taxed to other?

hi experts,
Please explain this "An ee sits in one company and taxed to other" with some example. As always, JEss is very thankful to you guys...
JEss..

Sounds to me like a Payroll topic. Where have you read this?

Similar Messages

What is meant by an Activity in Business One

Hi All,
What is meant by an Activity in Business One.I studied it in Business One Help,but it is not much helpful.I want a brief description regarding Activities(help me by taking an example).Where this activity used(only in Sales Opportunities and Service modules).
Help me regarding this or send me the related links that suit to my Question
Thanks & Regards,
Saleem

Maybe I don't understand your question, but I think this is no a SDK issue.
An activity can be a call, a meeting, a task, any interaction with a customer that you want to keep record.
So, lets say you have a sales opprotunity, and in the first meeting you came up with a follow up meeting. Then, you open the sales opportunity in SAP, and add an activity for that opportunity, detailing when, where is the meeting, who will go,what do you have to show, etc. You can set a reminder so you don't miss this meeting.
Hope this helps
Harold

What will I see when doing site survey with WRT and WRE?

I have just successfully setup with security, my WRE54G to my WRT54GS. It wasnt easy, lots of resets and disabling of security, but I didnt have to set a statis IP (which I am happy about)
However, now that I am searching for a connection on my laptop (wirelessly) I see to available networks but both are with the same name (the name of my original wireless network).
Is this right? If so, this gets confusing as I am not sure which I am connecting too.
Then if I change from one to another, I have to enter in the passphrase, which gets annoying.
Is there anyway to have a differnent name of my Wireless network vs the Wireless Expander?

The RE, as I understand it, just extends the router signal that it is connected to. That is why it is imperative that the setup be EXACTLY the same. In my case, I stupidly put some capital letters in my SSID but didn't put them in when I setup the RE. Took me the longest time to figure that out....That you see two "networks" on site survey is OK. That you can connect to them differently is weird and that you have to enter the security passphrase suggests that you really haven't been successful in setup. So, Dibbler's advice is correct. Make sure the router and RE settings are the same and the firmware is upgraded.
I can't tell what device I am connected to and I really don't care. I just know that the place I was connecting from prior to the RE was far from the router and I would get the "limited connection" warning and no internet. With the RE and closer to my laptop, I always get "excellent" signal and an internet connection. I assume I'm connecting to the RE but it is seamless.
Also, make sure you the supply the MAC address of the router if the RE is v.1. Got that from the full user guide at the Linksys WRE54g product page.
If you really want different SSIDs I think you need to get a bridged access point.
Message Edited by Luckydog on 06-20-2007 06:11 AM
Message Edited by Luckydog on 06-20-2007 06:15 AM

I have two BC sites. One is working while the other isn't.

I have designed thoughtcake5.businesscatalyst.com and macademia.businesscatalyst.com in Adobe Muse. The ThoughtCake BC site shows up in my browser but "the server can't be found" for Macademia. This had been the case for several days now.
Any explaination or help would be greatly appreciated!
Thanks!

Hi rgrtht,
It appears that the System and Secure URL for the site 'macademia' was not returning an A-record. I have since rectified this issue and I can confirm that these URLs will now resolve to your Business Catalyst site. If not, please clear your browser cache and try again.
Regarding thoughtcake5.businesscatalyst.com, I'm unable to locate a site that use this URL. However I can see other sites associated with your account that have similar names that do not have similar issues.
Cheers.

ML81n 101 in one month and 102 in other month, what to do now ?

Hello Gurus,
I`ve done 101 in ml81n in previos month and 102 in current.
I`ve deleted all the service enrty sheets, what should i do now to post it in current month ?
thanks for Your help

Hi,
As I believed, Last month you have created the Service Entry Sheet in ML81N for 250 & got SES number and then release the Service Entry Sheet, then only FI document created with 101 movement type.
Now you want to cancel the total transaction with accounting entries.
So, 1st cancel the release the of SES number created in ML81N(green flag) or in ML85 t.code with release code, so that FI entries will be reversed with 102 movement type and then Delete service entry sheet in ML81N.Check in t.code: MMRV, back posting allowed or not for your company code.
As required by you ,again do create service entry with PO and create service entry sheet(SES) and then release the SES for FI document creation with 101 movement type for accounting entries.
Regards,
Biju K

Whats the difference between data in customer data management dashbord and customers under sales?

Hi,
In the navigator>sales i have a menu customers, there i can see accounts (customers) and contacts, however in the navigator>Customer data management under menu Customer data management dashboard i have organizations and persons. Whats the difference between the information shown in one place and in the other? Why is the information shown with different names in different menus?
thanks

Hi, The present project has the requirement to Delete the data from Sales Force objects.Have following set up: 1. Parent Objects2. Child Objects3. Cloud Data Synchronization tasks to delete these objects Parent and Child have LOOKUP relationships between them.Deleing data from Child objects did not give any error. Tried 2 scenarios to delete data from Parent object: Scenario 1: Tried to delete to data from PARENT first before deleting CHILD. Result: Failed Scenario 2: Tried to delete to data from PARENT after deleting CHILD. Result: Failed Error mesge received in both cases: "Error loading into target [SF_Object] : Error received from salesforce.com. Fields []. Status code [DUPLICATE_COMM_NICKNAME]. Message [Too many records to cascade delete or set null]." Kindly help to resolve this error and suggest a method to delete data from PARENT salesforce objects. Please feel free to ask for more inputs, if required.

What is meant by return tables?

what is meant by return table?
with one example

hi
Return tables are used in cases where one record from the transaction translates into multiple records - something like cost allocations - you book an expense to the company for $1000 and that $1000 has to be translated into
$200 for your cost center
$500 for the general cost center
$300 to the project
this data ofcourse need not come from the transaction where you will have one line saying $1000 - you could have these weights maintained in a separate table in BW and do the cost allocation while receiving the data.
You can find a lot of information about the same in the FI related extractors / Update rules - or even more specific - the CO area..
hope it helps..
cheers.

What the difference between apple tv model md 199ll/a and 199c/a

what the difference between apple tv model md 199ll/a and 199c/a?

i think the question may be is what the difference between apple tv model md 199ll/a and 199x/a

What is meant by article grouping and site grouping and how to define

what is meant by article grouping and site grouping and how to define in SAP.

Hi Charan,
Article Grouping in its broader sense means grouping of Articles for ease of maintenance and business functions, either on the basis of Hierarchy or on the basis of Merchandise Category.Article Grouping is also primarily useful in promotions,wherein you can define a set of articles(which may not necessary fall under the same MC or Hierarchy) and club them together and assign them in a promotion.Txn codes used are : VBG1/2/3 - Create/Change/Display Article Group
For more information refer the link below
http://help.sap.com/saphelp_47x200/helpdata/en/12/08485c470311d1894a0000e8323352/frameset.htm
Site Grouping is used for ease of maintenance by grouping the sites.It is also used to maintain the characteristics as well.This can also be used in Allocation Tables,promotion and Listing etc
Some of the Txn codes -
WB50 - Site Group,Create Alloc,.table
Wb56 - Site Group, Alloc.table,Maintain Sites in Class
WB60 - Site Group,Create Promotions
WB64 - Site Group,Maintain SItes to Class
Wb80 - Create Site Group Other
For more information,refer the link below
http://help.sap.com/saphelp_47x200/helpdata/en/12/08485c470311d1894a0000e8323352/frameset.htm
Hope it helps
Rgds,
Aram K.
For more information refer to the link below

What is meant by 'Business Area'

Hi all
what is meant by 'Business Area' in discoverer?
Because i have installed BI Tools Discoverer Admin and Desktop
but unable to figure out what Business Area atcually is!!!!
Thanks in advance
Regards

Hi,
what is meant by 'Business Area' in discoverer?
Business area is nothing but a set of folders specified to that responsibility.
Seems your novice so to know concepts of BI and develop discoverer reports follow this user guides which can be downloaded from oracle site.
[http://download-west.oracle.com/docs/html/B10270_01/toc.htm]
[http://download.oracle.com/docs/cd/B14504_01/dl/bi/B10272_01/toc.htm]
Hope this helps you,if anything more feel free to ask we are ready to help you.You will find Discoverer interesting as you go on working with it.Have a nice time working on it.
Best Wishes,
Kranthi.
Edited by: Kranthi.K on Jun 16, 2009 7:29 AM

Difference between scan rate and sampling rate? what is meant by throughput/maxt

want to know the difference and meaning of sample rate and scan rate ? what is meant by throughput and maximun throughput

Hello;
There is a really good KnowledgeBase at NI web site that talks about these definitions and differences.
The KnowledgeBase ID number is 2D6CTML8.
Hope this helps.
Filipe

I'm trying to connect my MacBook Pro running on OS 10.8.2 to a Linksys EA3500 router and when I go to click on the set up icon I get an "unsupported operating system". Any suggestions on what to do? The Linksys site is useless.

I'm trying to connect my MacBook Pro running on OS 10.8.2 to a Linksys EA3500 router and when I go to click on the set up icon I get an "unsupported operating system". Any suggestions on what to do? The Linksys site is useless. Do I need some kind of upgrade?

Don't use the CD software its not necessary.
Infact put it in the trash.
Your router will have an IP address in the range 192.168.1.1
Connect your router to your Mac via Ethernet cable (They usually supply one with the router and don't worry which end goes where the Mac LAN socket is bi-directional)
Also connect your router to your telephone line.
Now open your Web browser Safari . Type in the IP address above and a Javascript control panel will launch
Enter the default password and username (They are on a label on the router )
Your now have the ability to set up your router.
Your will need the password and user name supplied to you by your ISP at a minimum.
Enter these and most modern routers automatically configure the basic networking setting.
You now need to go to the security setting and set this as WPA2 Personal (NOT Enterprise) or WPA2 with AES and TKIP which ever it refers to and create a pass-phase. WRITE it down
You should be online.
Now remove the cable and connect to the Wifi and enter that passphase.

What is meant by costing key?

Dear Experts ,
while releasing the billing document to accounts , i am getting error like
Valuation with material cost estimate: error, The system looked for the material cost estimate using costing key "002", as defined in the Customizing settings for CO-PA, incomplete due to FI/CO interface
what is meant by costing key?
regards
rajakarthik

Hi,
In Costing based Profitability analysis you define costing keys. A costing key is a set of access parameters which are used in valuation to determine which data in Product cost planning should be read. In the costing key you attach the costing variant.
In the costing key you specify whether the system should read the current standard cost estimate, the previous standard cost estimate or the future standard cost estimate or a saved cost estimate.
The configuration settings to determine this costing key is as follows:
Assign costing keys to the products u2013 Three costing keys can be attached to a single product for a specific point of valuation, record type, plan version.
Assign costing keys to Material types
Assign costing keys to any characteristics u2013 You can use your own strategy to determine the costing keys. This is through user defined assignment tables.
regards,
Santosh kumar

In IOS7 none of my YouTube movies show up on my site build with iWeb and its YouTube widget. On an iPad running IOS6 the site still works fine, and all movies play well. What is going on,and what can I do to solve this problem ???

In IOS7 none of my YouTube movies show up on my site build with iWeb and its YouTube widget. On an iPad running IOS6 the site still works fine, and all movies play well. What is going on,and what can I do to solve this problem ???

It's only Safari/iOS7. Chrome iOS7 works fine.
Solution?
Go to YT and grab the code.
Paste it in a HTML Snippet.

Dispute Case Key (Replicated) (0DPM_D10); what is meant by Replicated?

Hi everyone,
I am working on implementing FSCM Dispute Managment module. I have some questions regarding the new standard content provided by SAP for this:
Earlier I have seen clients using the Stanadard InfoSet 0DPM_I0 for all the Dispute's reporting as it combines data from AR, Dispute Case key and 0Customer. But now I am seeing a bunch of new objects like 0DPM_M10, 0DPM_M20, 0DPM_C10, 0DPM_D10, 0DPM_DCAS_10 etc. provided by SAP as standard content.
Does any one have any experience with this new content; can anyone explain me how this new content is useful. My client is reluctant against using the standard InfoSet as its is built on two DSO's; I have suggested to build a cube on top of them and can still use an InfoSet to combine AR line items, Disputes, Dispute case key and Customer. Correct me if I am wrong with thid statement.
Also please let me know what is meant by a Replicated DSO.
Any comments or suggestions will be greatly appreciated.
Thanks & Regards,
SRV

There are a few things to consider:
     1) The data is stored in deserialized form until it is read. The first read will deserialize the data.
     2) There is some overhead per-entry. 750MB/(3,000,000-30) = ~250 bytes per entry. Some portion of this is attributable to the per-entry overhead.
     3) How did you measure memory usage? Usually invoking <tt>System.gc()</tt> before measuring heap usage will clear garbage but is not guaranteed.
     Jon Purdy
     Oracle

What is meant by "an ee sits in one company and taxed to other?

Similar Messages

Maybe you are looking for