What is next screen in Table T588M?

HI guys,
I was just wondering what is the use of "Next screen"  T588M.
Thanks,JEss.

Straight from SAP
"Number of the screen which usually follows the screen being processed. The screen number 0 causes the transaction to be terminated or the program/screen to go back one level."
Just press F1 on the field on which you want to find the information
cheers
AJ

Similar Messages

  • How to populate the next screen based on the previous screen table control

    Hi Experts,
            Is this possible to generate the next screen values based on the table control values in previous screen.
    My Requirement is
    In my First screen i m having 5-7 regional offices in table control and also amount field for each regional offices.(amount field is editable)
    User has to enter amount field for Regional office..based on the amount field i need to process the next screen. For Ex if user is entering  amount for 3 regional offices out of 7 regional offices then i need to get the screen for the 3 regional offices..
    Pls suggest me how to do this..
    Regards,
    Zakir

    Hi Zakir,
    Do you have any button for calling the second screen after entering amount in the first table control screen or you have to call the screen on pressing enter on the table control?
    You will have to handle it in the PAI of the table control loop.Get data entered in the table control in your internal table of table control.You can prepare the data passed to the next screen from this internal table. Fill the second screen elements and Use CALL SCREEN XXX. XXX is your second screen no.
    Thanks,
    Pawan

  • HT201380 Yesterday this was automatically installed.  Today I can't access a document in Pages.  A prompt says I need a Pages update.  But the next screen tests for updates and informs me everything is up to date.  What's up?

    Yesterday this was automatically installed.  Today I can't access a document in Pages.  A prompt says I need a Pages update.  But the next screen tests for updates and informs me everything is up to date.  What's up?

    It's highly unlikely that the Pages update problem has anything to do with the ARD client update, since the client is not involved in any way with Software Update. I'd suggest asking for assistance with the update problem in the forum appropriate for your version of Mac OS X.
    Regards.

  • HT201263 my i pad has stopped at ''connect to i tunes'' screen and it is not going further what to next

    my i pad has stopped at ''connect to i tunes'' screen and it is not going further what to next. please help me.
    Rajasekhar

    Try this:
    1. Close all apps in the Task Bar. Double-click the Home button and hold apps down for a second or two. Tap the minus sign to close app.
    2. Hold the Sleep and Home button down until you see the Apple Logo.

  • Table T588M for info type screen display:

    Hi Experts
    I have deleted relevant entry in in table T588M for an info type still the system shows some screen. where from does that screen come. Can anybody help..?

    As i understand, there is a screen element that you want to get it disabled but is not available in the table v_t588m. Is that right???
    If YES, the screen element/ field of your screen, for example 3000 of it0817, can be disabled from the screen layout also.
    Go to SE80 -> select the module pool mp081700 as your program -> select screen 3000 -> Click on the 'layout' in the application toolbar -> select the element and delete or change the properties, might be display properties in your case.
    Hope this helps.
    Cheers,
    LG

  • Is there a way for Drag & Drop answers to populate next screen?

    I'm working on a project in Captivate 7 where the user is filling out a table (1 row, 3 columns, 9 possible correct answer combinations) using drag and drop words. The user will ultimately build a table with 3 rows and 3 columns, doing 1 row at a time per screen.  I would like the user's correct answers to the rows they have already completed correctly to appear on each successive screen (but not for the entire rest of the project, just the following few screens). I have tried to get this working every which way and I can't seem to make it happen.
    The closest I have gotten is to use the "accept" panel to set each correct answer to assign its own value to a variable placed in a text caption on the following slide. However, that seems to trigger an auto-submit (I have the global "auto submit correct answers" turned off) so that the first item the user places correctly in the table advances them to the next slide even though there are still 2 more cells of the table to complete.

    Here's a shot of the intiial screen:
    As you can see, there are multiple correct combinations of answers. (Users will be children, so it does need to be very user-friendly with the ability to undo/reset answers.) In the word bank are 3 correct variable items and 6 correct values (I have it set so that only correct combinations of variables and values will be accepted as correct, so "lemonade" will never be a correct value for "age of seller", for example).
    Here's the next screen which I have made fill from selections from previous via an "on accept" advanced action (show a text caption unique to that answer and location):
    The problem with this advanced action solution is that if the user makes a selection in the first screen, then gets it partially wrong or for some other reason resets the words back to the bank, those text captions on the next screen still have been shown and will stick around, thus:
    Every solution I've attempted has had some fatal flaw in the end. What I really need to happen is a conditional action that basically says "If the contents of drop target X = drag source Y, then set VarA [on screen 2] to $text$." For example, "If the contents of drop target [Variables Cell] = Text Caption timeofday, then set $Var1$ to "Time of Day".
    I am about to throw in the towel here and just have students type in words to text boxes (these are mainly disadvantaged students I work with, so their typing skills are not great) just to utilize being able to make a user-generated variable out of text box entries.

  • When i click the listview items I have to call two odata webservice and pass that data to next screen ?

    Hi All,
                I Have two odata webservices When i click the listview items I have to call that two odata webservice and pass that data to next screen ?

    You don't have to pass the data to any page.
    onInit method of controller set your oData model like this.
                  onInit: function() {
                  //var oModel = sap.ui.model.json.JSONModel();
                  var oModel = sap.ui.model.json.JSONModel("http://services.odata.org/V3/Northwind/Northwind.svc/Customers?$format=json");
                  sap.ui.getCore().setModel(oModel,"oDataId");
    After this you can access your model from any views by just binding the elements with your odata. Suppose i have a table in a view of my application then i can write like this.
                  var oTable = sap.ui.table.Table({
                         tableId: "myTable",
                         visibleRowCount: 5,
                         editable: false
                  oControl = new sap.ui.commons.TextView({text: "{CustomerID}"});
                  oTable.addColumn(
                               new sap.ui.table.Column({                             
                               label: new sap.ui.commons.Label({text: "Customer ID"}),
                               visible:true,
                               template: oControl  
                  oControl = new sap.ui.commons.TextView({text: "{ContactName}"});
                  oTable.addColumn(
                               new sap.ui.table.Column({                             
                               label: new sap.ui.commons.Label({text: "Contact Name"}),
                               visible:true,
                               template: oControl  
                  oControl = new sap.ui.commons.TextView({text: "{ContactTitle}"});
                  oTable.addColumn(
                               new sap.ui.table.Column({                             
                               label: new sap.ui.commons.Label({text: "Contact Title"}),
                               visible:true,
                               template: oControl  
                  oControl = new sap.ui.commons.TextView({text: "{CompanyName}"});
                  oTable.addColumn(
                               new sap.ui.table.Column({                             
                               label: new sap.ui.commons.Label({text: "Company Name"}),
                               visible:true,
                               template: oControl  
                  oTable.bindRows("oDataId>/value");
    Here you can see i have binded the oData with table.
    Just what i am seeing that you are trying to pass this model to a page. You don't have to do so. Just bind your oData with relevant elements lite table or anything by writing like this.
    oTable.bindRows("oDataId>/value");
    these functions are different for different elements.
    for listItem you may write like this.
                  var oList = new sap.m.List({
                  inset: true,
                  items : [
                                        new sap.m.DisplayListItem({ label :"Category ID", value : "{oDataId>/CategoryID}"}),
    {oDataId>/CategoryID} this has been used for binding.
    Regards
    Dhananjay

  • In website, Firefox will not go to the next screen. Instead I have to click 'allow'. This is on sites where I never had this problem. I want it back to the way it was.

    On sites that I have been using for many months with no problem, when I click to go to the next screen (like 'continue'), it doesn't go to the screen. I get a bar and have to click 'Allow'. This is happening continuously on screens where it didn't do it before. If it were occasional I wouldn't mind. But it happens all the time. What was changed in Firefox to cause this problem. It has really been a pain paying bills online.

    What is the message to the left of the Allow button? Hopefully with that information we can advise on changes to your settings to resolve the issue.
    You also could supply a URL of a site that has this problem, assuming we don't need an account to check it out.

  • My iphone 3gs is not working properly, when switched on it says 'Update Completed' as though it has just been updated. On the next screen it says to 'Connect to iTunes'. It doesn't, however, connect to iTunes and more often than not just resets itself.

    My iPhone 3gs is not working properly and hasn't been since about September of last year. When switched on (Quite often it won't even turn on) it says 'Update Completed' as though it has just been updated. On the next screen it says to 'Connect to iTunes'. It doesn't, however, connect to iTunes and just resets itself over and over until power is gone. Occasionally after switching on and off a few times it functions normally for a few hours and some times even a couple of days but eventually always turns itself off and goes back to the 'Update Completed' screen. Does anyone know what might be causing this and/or a way of fixing it?

    Morning JordenR,
    Thanks for using Apple Support Communities.
    You can resolve many restore issues using the troubleshooting steps documented here.
    For more information on this, take a look at this article:
    iOS: Resolving update and restore alert messages
    http://support.apple.com/kb/ts1275
    Best of luck,
    Mario

  • Concept of Interactive Report by click on filed displaying next screen

    Hi,
    I want to know the concept of Interactive report i have work on simple and ALV reports, as per my present requirement of vendor outstanding balance  i have made a report as per my requirement i have data in 3 final tables  itab1  itab2   itab3,
    itab1 have all the data related to vendor bills line item wise,    itab2  have the data only as per vendor  means for one vendor one entry adding all the line item amount in one  row,   itab3 have the data as per reconcile account    
    in my requirement  firsti want to display  itab3       and after this  if vendor click on any reconcile account itab2 to be display  only those record as per selected reconcile account further to this  on next screen  if user click on any vendor  system should disply the itab1  record as per selected vendor from second screen.
    regards,
      zafar

    Hi
    call function 'REUSE_ALV_GRID_DISPLAY'
        exporting
          i_callback_program       = sy-cprog
          i_callback_user_command  = 'USER_COMMAND' " This is also maintained below just check further down
          is_layout                = gs_layout
          i_callback_pf_status_set = 'SET_PF_STATUS' " This form is maintained below just check further down
          it_fieldcat              = gt_fieldcat[]
          i_save                   = gc_a
        tables
          t_outtab                 = ist_final[].
    form set_pf_status using rt_extab type slis_t_extab.        "#EC CALLED
      set pf-status 'ZPP_NCO_STATUS_PTEI' excluding rt_extab.
    endform.   
    form user_command using p_ucomm    type sy-ucomm            "#EC CALLED
                            wa_selfield type slis_selfield .    "#EC CALLED
      case p_ucomm.
    * When user clicks on the Download button
        when '&DOWNLOAD'. " after you double click check the sy-ucomm (it is ONLY to the best of my knowledge )
    " again  Use The ALV FM or continue with your coding here
    " wa_selfield  contains the Line along with the contents of values of First Tab you can check them in Debug.
    Similary continue with Third Internal Table
    endform.

  • In the component overview screen of CO01 I want  to disable all  the field in  screen of table control.I want to make it as output screen only.

    Hi all
      In the component overview screen of CO01 I want  to disable all  the field in  screen of table control.I want to make it as output screen only.
    Thanks & Regards,
    Rajib.

    Isn't that just exactly what transaction CO02 does? CO01 is for creating production orders so what sense does it make to have it display mode only?
    Maybe your goal is to stop then end user changing the component assignment that is automatically  detected by the system. If so, personally I think a better starting point would be PP configuration or user authorizations rather than looking to change the screen by whatever method. As we don't know what you are trying to achieve it's hard to offer much more advice maybe all you need is to change transaction to CO02

  • My ipod touch thinks headsets are plugged in as indicated when pressing volume control.  We did a reset but that did not work.  What is next?

    My ipod touch thinks headsets are plugged in as indicated when pressing volume control.  We did a reset but that did not work.  What is next?

    - Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so. There is a little switch in the headphone jack that disconnects the speaker when the headphone jack is inserted.
    Try the following to rule out a software problem
    - Reset the iOS device. Nothing will be lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup
    - Restore to factory settings/new iOS device.
    - Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack.
    Apple Retail Store - Genius Bar
    If not under warranty Apple will exchange your iPod for a refurbished one for this price. They do not fix yours.
    Apple - iPod Repair price                  
    A third-party place like the following will replace the jack for less. Google for more.
    iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
    Replace the jack yourself
    iPod Touch Repair – iFixit

  • What is the use of table control in bdc is it same in module pool table con

    Hi,
    What is the use of table control in bdc is it same in module pool table control?
    regards
    eswar

    Hi,
    Table control means it contains as table and it will scroll in vertical and horizontal.
    In module pool by using screen we can create new table control.
    But  BDC table control means here we can populate the data into the table control.
    i.e.if you take VA01 for sales order creation in the belwo of VA01 screen there is table control for the filling of material details so here we will write the code to populate the data into the table control screen.
    Thanks and regards,
    shyla

  • Not able to display PA30 next screen when I say create for a custom info

    i have created a custom infotype, when i run the transaction PA30 to create a record for that in one client the screen is displayed, when i run the transaction in different client and say create, the next screen is not displayed,  remains in the first screen. what could be the reason, how do i slove it.
    Urgent Please..

    It will transport your custom infotype automatically if you assign a transport request number in client1.  I think you did manually in client2 and missed to generate the module pool/screens while using tcode PM01.
    If above case is true then you will have to re-generate the steps for module pool screen(s) with your structure fields.
    Thanks,
    Kiran.
    Reward points are appreciated.

  • Hi guru's what is the difference between table and temlate in smartforms

    hi guru's what is the difference between table and temlate in smartforms

    Hi Vasu,
    Template is used for proper allignment of data which table is used for displaying multiple data.
    We can say Template is for static data and Table is for dynamic data.
    Suppose we have a requirement in which we have to allign the customer address in such a way as shown below:-
    Name- Vasu Company- WIPRO Location- Chennai
    Desig- S/W Native - Mumbai
    Then for proper allighnment we can create a template and split that into 3 columns and 2 rows and create text elements for each cell display a proper allighned data at the output.
    When we include a template inside a loop it gives the same property as a table.
    When we have mutiple data which is to be extended to the next page like when we display all employee details in a company we use table.
    Table has 3 sections , HEADER, ITEM ,FOOTER
    The header secntion will be executed once and it will loop at the item level. at the end footer will be executed.
    Hope this gives u some idea..
    <b>Please reward if useful</b>
    Regards,
    sunil kairam.

Maybe you are looking for