What is (sdlc) software developement life cycle management in hyperion esssbase and planning ?

what is (sdlc) software developement life cycle management in hyperion esssbase and planning ?

SDLC is a high-level concept (https://en.wikipedia.org/wiki/Systems_development_life_cycle) not a feature of a particular software package, so I'm really not sure what you're asking.
If you're asking about the somewhat related topic of moving changes through environments, look at About Lifecycle Management.

Similar Messages

About the sdlc(software development life cycle)

wat is the sdlc? wat model do we flow in any company?

In SAP the Development Methodology is called ASAP Methodology:
Project Preparation:
The first step in ASAP is Project Preparation. In this step the Functional Consultant will analyse the business process and define the system for SAP and will give the time line for the project. The Manpower required and the budgets are also considered in this step.
Blue Print Preparation:
This is second step in ASAP Methodology. In this step the Project Preparation scenarios are finalised. A out line of the Project is given in this step.
Realisation:
In this step actual development is taken place. The ABAPer is responsible for this step.
Testing:
In this step the development done by the abaper is being tested. This is the area where the Unit Test Document is prepared (i.e. Positive Testing and Negative Testing).
GO live and Support:
This is the final stage where the project is running in the live environment. In this step the bugs if any that are found in the go live procedure are fixed and the project will be considered as support project.
Rewards if useful.

Software Development Life Cycle

Hi, this isn't about RoboHELP so hope it's OK here but my
company is about to redesign their SDLC and I want to make sure
that Documentation gets a proper look in. Are there any protocols
anywhere or examples of good processes and systems for
communication between developers and help authors?
Thanks

We are a very small company but all of our help authors are
also product testers, who are involved early on. We are also all
research scientists who are using the product daily. I believe this
is a very good model (it is, however, dependent on the genius of
our company president). We do with five people, what our leading
competitor company does with 500.
I would very strongly support the comments made by
ChetZeshonski. As it is not possible to design software that is
"intuitive" for every user there will be design issues that cannot
be "corrected." If your SDLC links you to the product testing
cycle, you will be much better able to write instructional material
to get all end users up to speed.
Email me if you would like me to send you a .chm file of our
SDC.
John

CSV Software snapshot life cycle management mechanism doesn't work at all

Hello.
I have Hyper-V cluster on Microsoft Windows server 2012 R2 update1. Free space on one of the CSV constantly decreases during the backup of VMs that are on this CSV. In the System log a node that owns this CSV there are a lot of entries like:
"Volume CSV03_HDD (\Device\HarddiskVolumeShadowCopy2884) is healthy. No action is needed." Event ID = 98
I think there is a constant increase in the number of snapshots on this CSV.
I want apply SnapshotAgeLimit value from
http://support.microsoft.com/kb/2935810 , and set it to 1. But nothing has changed.
Is there a way to forcibly remove old snapshot on CSV ?

Hi StDenis,
Please make sure the AD object exist for the cluster CNO and the CNO not be disabled.
Please see the following article
and install the update listed there.
      Recommended hotfixes and update for Windows Server 2012 R2-based failover clusters.
http://support.microsoft.com/kb/2920151
3. Please make sure the HBA Drivers and Firmware are up to date.
4.
Run the chkdsk on your CSV to check whether there have any error.
5. Please make sure he Bios, Drivers and Firmware on the server are up to date.
  6. We will also need to check all hardware between the cluster and the san for errors.
      "Switches, Cables, and connectors
More information please see the following article.
How to Run ChkDsk and Defrag on Cluster Shared Volumes in Windows Server 2012 R2
http://blogs.msdn.com/b/clustering/archive/2014/01/02/10486462.aspx
How to recover a deleted computer object that supports a Network Name resource in a Windows Server 2008 or Windows Server 2008 R2 failover cluster
http://support.microsoft.com/kb/950805
I’m glad to be of help to you!
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Difference between life cycle manager and import wizard

Can any one tell me about life cycle manger. To my knowledge we use import wizard to move the data from from one environment to other. then what is the purpose of life cycle manager.
weather we need to install on the boe xi 3.1 server(solaris server) or do i need to install on the client machine. do we need separate licence to get this are is it free.

LCM enables you to store several versions of the same BOBJ object (eg reports). This is very helpful for development projects eg. if your testing phase fails you can rollback to an older version of your reports.
Regarding the license you have to ask your local SAP sales representative. I know that the license is normally bundled in BO license packages but only SAP sales can provide an official statement about this.
My personal recommendation: If you want to move a limited number of objects on-demand and fast then use the Import WIzard. Otherwise use the LCM.
Regards,
Stratos

CMC: Security: Life Cycle Manager (LCM) missing under "Appication" Security

Hello there,
I am trying to set up security for the Life Cycle Manager (LCM). LCM has been installed on the BO 3.1 DEV_System with version SP2, FP4, by another company.
I am using the procedure described in the (my opinion very well written) article:
http://wiki.sdn.sap.com/wiki/display/BOBJ/FromDEVtoQAtoPRODusingLifeCycleManager
The problem is, in the CMC security, under "Application" ("Anwendung") security, I cant see the "life cycle manager",
Hence, e.g. I cant grant access to "Application"->"Life Cycle Manager"->"Create Job". I am using an Admin user with full rights.
The life cycle manager does show up however under "Content" ("Inhalt") security, but I guess this concerns other security settings bc granting access to all of "Content"->"Life Cycle Manager" and "Content"->"Life Cycle Manager Job" still didnt allow end-user to create jobs.
Did anybody stumble accross the same or has an explanation or solution?
I think this is either a installation or configuration issue (are there any additional settings after intallation needed in other places in order to display security "Application"->"Life Cycle Manager" security in CMC and be able to grant end-users the appropriate rights) ?
Thanks a lot for your help!

Hi there,
thanks... meanwhile, I found a SAP note that describes exactly the problem:
1443784
Advice is to even delete the whole workfolders for all webapps (.../localhost/catalina/...) and deployfolder and after that, start tomcat again.
This also seemed to deploy all the webapps again, also, date from the deployed files indicates they really got redeployed.
But: Still the same behaviour, no LCM in CMC-Security under "Applications" .
Since everything got deployed again guess already the files that are deployed are not containing the right information!
Maybe, during installation, they didnt get updated somehow.
So, guess only solution will be to completely uninstalling LCM, reinistall it and cross finger that this time, the files will get updated.
I already tried uninstalling FP 2.4, reinstalled it, no improvement (although it says it is updating CMCApp and CMCAppAction during installation - maybe the necessary updates are already done during isntallation of SP0/SP1/SP2).
When trying to uninstall SP2 after FP 2.4 is uninstalled, get an error "missing .dll" - it is a mess, but I will keep on fighting
If anybody has a clue how to specifically change specific files under CMCApp and CMCActionApp directly (dont know if that is possible though...) so that LCM App is displayed correctly in CMC Security->Application , would also be an acceptable workaround .

Lift cycle management not migrating epma and security

Hi,
Essbase 11.2 unix, planning 11.2.unix, epma
A customer has a number of environments and the life cycle management is used to migrate planning between environments. However, the process is not robust with shared services and epma not being copied correctly.
To get around this the epma db is being copied but this hasn't resolved the problem. What is the best way manually copy empa data between environments? Is the meta data info stored in the plann app db itself which is also being copied?
Thanks,
Nathan

For EPMA the best solution is going to be LCM, I am not sure what you mean by not being copied correctly.
If you are having specific problems with LCM then these should be logged with Oracle.
Cheers
John
http://john-goodwin.blogspot.com/

What is life cycle management in netweaver architecture

hi all,
I am new to sap can any one help me by sending me links on life cycle management in NetWeaver architecture.

http://www.sap.com/platform/netweaver/pdf/BWP_SB_Unified_Lifecycle_Management.pdf
http://www.sap.com/solutions/business-suite/plm/pdf/BWP_Life_Cycle_Process_Support.pdf
http://www.filetek.com/software/product_sheets/datasheet_SAP.pdf

Error while executing transport in HANA's application life-cycle management

Hi everyone,
we're currently developing our HANA-based software and would like to use HANA's application life-cycle management: transporting our product from one system to another. Everything seems to be set up correctly: two different systems, correct privileges, a product comprising delivery units comprising packages as well as a transport route between the systems. However, the transport always fails with the following error (example for a transport of a single DU):
[imdbhdb][HDB][2014.05.07 15:10.01.404][TransportService][0] Transport (delta) has been started for route ID: 1020 (Deliver Unit Transport)
[hanaserver][HDB][2014.05.07 15:10.08.323][Other][0] Get end export timestamp for DU name: PERSISTENCE
[hanaserver][HDB][2014.05.07 15:10.08.501][Other][12] Unable to retrieve end export timestamp: ReferenceError: assignment to undeclared variable errText
[imdbhdb][HDB][2014.05.07 15:10.12.402][TransportService][0] There will be 1 delivery units which will be transported.
[imdbhdb][HDB][2014.05.07 15:10.12.895][TransportService][12] Failed for DU: PERSISTENCE Vendor: LO Error: HTTP request failed. Status: 500. Error: Unable to retrieve end export time stamp.
[imdbhdb][HDB][2014.05.07 15:10.12.917][TransportService][12] TransportServiceError: Error occurred while performing the transport.
Does anyone know how to resolve this?
Thanks so much in advance,
Lukas

Hi everyone,
I am sorry I bothered you with this error. It was caused by me since I forgot to export a top-level file. This file must have defined a variable errText which other DUs depended on and could therefore not be activated.
Now, the transport works perfectly well and I'm really happy with it.
All the best
Lukas

Life Cycle Management BODI

Hi folks,
can anyone give me some hints how life cycle management is done in BODI?
I want to connect a DB2 database via BODI with a BI. BI comes in 3 tier layer. Would you install 3 BODI server? And if so how do I "transport" the changes from one repository (Development) to another one (Production)?
What is best practice for that?
Unfortunately I didn't find any documents so far.
Your help is very welcome.
Best regards
Michael

This is what I have: https://wiki.sdn.sap.com:443/wiki/pages/viewpage.action?pageId=49414406

Life cycle manager setup

Hi,
I have just installed the Enterprise 4.0 platform and want to get started using the Life Cycle Manager.
I have read the manual but still I wonder if it is possible to make sure that you can only transport objects from Development --> Test --> Production or can it just happen randomly from any system --> any system?
I don't seem to be able to find an answer to this in the documentation.
Any ideas?
Kim Johannsen

Hi John
It is still possible to connect directly from DEV to PROD if you want to do so. I realize that you for each LCM enviroment can specify the origin system which to some extent ensure that you don't move object to the wrong system, but the destination can still be any environment.
My conclusion is that you just have to be careful and think about what you are doing
/Kim

Xcelsius 2008 - Life cycle management

All,
We have developed Xcelsius 2008 dashboards (by QAAWS) which are published in BO XI 3.0 Enterprise Infoview. How do we promote Xcelsius dashboard from development to production? Do Import wizard help on this?
Below are the workflow that I think about:
1) Create QAAWS in both development and production
2) Create dashboard in Xcelsius 2008 in development through WSDL URL created in QAAWS
3) Publish the report in BO 3.0 Infoview.
4) Through Import Wizard, import dashboard from dev to prod.
My question is how do we map the imported dashbaord in production to production WSDL URL.
Please let me know the above approach for Xcelsius 2008 life cycle management is correct.
Thanks
Jai

Thanks Jon. So all I need to change Web Service URL from:
http://bodevserver:8080/dswsbobje/qaawsservices/queryasaservice
to
/dswsbobje/qaawsservices/FIAR?WSDL.
But how will this change to production server WSDL URL when this report moves to prod by import wizard?
Below is the work flow I did in QAAWS client:
1) Created 2 URL one for Dev and another for Prod
2) Created first URL in development through QAAWS client and deploy the same in prod by changing the prod server name.
For Dev --> http://bodevserver:8080/dswsbobje/qaawsservices/FIAR?WSDL
For Prod --> http://boprodserver:8080/dswsbobje/qaawsservices/FIAR?WSDL
I am still confused how these above 2 links helpful in Xcelsius to do life cycle managemnet without any mannual interpretation.
Thanks
Jai

Regarding SLCM (Student Life Cycle Management)

Hi
does any one working on Student Life Cycle Management(SLCM)
can any one pls let me know what are the function modules present in the predefined business package and how to know what are the predefined functonalites given by sap.
when i test the predefined Iviews i get an error for some of iview as student object id not found.
can any one pls let me know about this
Bye

Ok Fine
I have some points to share thise issue with u
first thing is , iam using wrong application for the requirement.
and even i use wrong apps some thing result should be show, as i said the error i got
we raised an sap Oss for this, they provided the solution as stating that we are using the apps which are specific to the advisor but not for the students specially.
So if u want to use those apps for student purpose we need to get that student object and pass in our application.
for this purpose we need an abaper help who is well versed in the coding part.
just modify the code of required application where u fetch the object id (BY Coding) in ithe intialization method,
then the appication works fine
this is the solution i got and all my apps are working fine now.
Thanxs
sandeep

Business Partner Roles and Account Life Cycle management in IC

Hi all,
We have IC agents creating prospects but also back office people (i.e. sales staff) creating prospects. Back office staff uses account life cycle management to identify the prospect role. However, I noticed that the business partner role (prospect in this case) is not visible within the IC - during account creation - because the role is used within the account life cycle role exclusion group.
I can always enhance the IC component to remove the filter on the BP Role. but question I have is why does SAP IC remove the roles from the role drop down list in the IC account creation screen and how did other people get around this?
Thanks,
John

I am also looking for an answer on this. How did other people who work on Interaction Center get around this? How do you create accounts when IC removes the BP roles mentioned in the Exclusion group config in SPRO ?

Requirement of E-sourcing and e-CLM (contract life cycle management) in SRM

Dear Experts,
Does one need to install e-sourcing and eCLM (contract life cycle management) in SRM 7.0 to take the benefit of full functionality available in SRM 7.0?
My understanding says that e-Sourcing and CLM are not must for SRM 7.0. They are basically available separately as on demand product who may not have SRM landscape.
Any ideas shared will be highly appreciated.
Reagrds,
Ranjan

Hi Ranjan -
The answer is NO, you do not need E-Sourcing/CLM to install and work with the contract functionality in SRM 7.0. These are completely different products / systems. The contracts functionality in CLM is oriented toward contract authoring / qualitative information management about contracts, while the functionality in SRM is more oriented toward the quantitative contract information/execution of the contracts against orders.
Hope this helps,
Emily

What is (sdlc) software developement life cycle management in hyperion esssbase and planning ?

Similar Messages

Maybe you are looking for