Error while executing transport in HANA's application life-cycle management

Hi everyone,
we're currently developing our HANA-based software and would like to use HANA's application life-cycle management: transporting our product from one system to another. Everything seems to be set up correctly: two different systems, correct privileges, a product comprising delivery units comprising packages as well as a transport route between the systems. However, the transport always fails with the following error (example for a transport of a single DU):
[imdbhdb][HDB][2014.05.07 15:10.01.404][TransportService][0] Transport (delta) has been started for route ID: 1020 (Deliver Unit Transport)
[hanaserver][HDB][2014.05.07 15:10.08.323][Other][0] Get end export timestamp for DU name: PERSISTENCE
[hanaserver][HDB][2014.05.07 15:10.08.501][Other][12] Unable to retrieve end export timestamp: ReferenceError: assignment to undeclared variable errText
[imdbhdb][HDB][2014.05.07 15:10.12.402][TransportService][0] There will be 1 delivery units which will be transported.
[imdbhdb][HDB][2014.05.07 15:10.12.895][TransportService][12] Failed for DU: PERSISTENCE Vendor: LO Error: HTTP request failed. Status: 500. Error: Unable to retrieve end export time stamp.
[imdbhdb][HDB][2014.05.07 15:10.12.917][TransportService][12] TransportServiceError: Error occurred while performing the transport.
Does anyone know how to resolve this?
Thanks so much in advance,
Lukas

Hi everyone,
I am sorry I bothered you with this error. It was caused by me since I forgot to export a top-level file. This file must have defined a variable errText which other DUs depended on and could therefore not be activated.
Now, the transport works perfectly well and I'm really happy with it.
All the best
Lukas

Similar Messages

  • Getting Error while Execute SSIS Package from Console Application

    Dear All,
    SSIS package working fine directly.
    I got following error while execute SSIS package from C# console application.
    The connection "{79D920D4-9229-46CA-9018-235B711F04D9}" is not found. This error is thrown by Connections collection when the specific connection element is not found.
    Cannot find the connection manager with ID "{79D920D4-9229-46CA-9018-235B711F04D9}" in the connection manager collection due to error code 0xC0010009. That connection manager is needed by "OLE DB Destination.Connections[OleDbConnection]"
    in the connection manager collection of "OLE DB Destination". Verify that a connection manager in the connection manager collection, Connections, has been created with that ID.
    OLE DB Destination failed validation and returned error code 0xC004800B.
    One or more component failed validation.
    There were errors during task validation.
    Code : 
       public static string RunDTSPackage()
                Package pkg;
                Application app;
                DTSExecResult pkgResults;
                Variables vars;
                app = new Application();
                pkg = app.LoadPackage(@"D:\WORK\Package.dtsx", null);
         Microsoft.SqlServer.Dts.Runtime.DTSExecResult results = pkg.Execute();
    I have recreate the application with again new connection in SSIS.
    Still not working, Please provide solution if any one have.
    DB : SQL Server 2008 R2
    Thanks and regards,
    Hardik Ramwani

    The connection "{79D920D4-9229-46CA-9018-235B711F04D9}" is not found. This error is thrown by Connections collection when the specific connection element is not found.
    Cannot find the connection manager with ID "{79D920D4-9229-46CA-9018-235B711F04D9}" in the connection manager collection due to error code 0xC0010009. That connection manager is needed by "OLE DB Destination.Connections[OleDbConnection]"
    in the connection manager collection of "OLE DB Destination". Verify that a connection manager in the connection manager collection, Connections, has been created with that ID.
    Are you sure that you are running the same package via .NET which works fine from Visual Studio?
    By reading error message, I can say that you have copied OLEDB task from another package OR you have deleted one OLEDB connection manager. Now when package is run this task tries to use the connection manager and not found thus throws error message.
    Open all OLEDB destination tasks and you find connection manager missing. Connection Manager name should be provided there
    Cheers,
    Vaibhav Chaudhari
    MCSA - SQL Server 2012

  • I am getting a error while executing the Web Dynpro Application Page.

    Hi All,
    I am getting a Error while executing a web dynpro application ::: 
    : Navigation in Phase WDDOMODIFYVIEW Cannot Be Triggered. Component: Z_WEP_PERSONAL_DATA, View: OVERVIEW, Window: Z_XXP_PERSONAL_DATA
    I have checked this error description in ST22  :
    What happened?
        The exception 'CX_WDR_RT_EXCEPTION' was raised, but it was not caught anywhere
         along
        the call hierarchy.
        Since exceptions represent error situations and this error was not
        adequately responded to, the running ABAP program
         'CL_WDR_CLIENT_APPLICATION=====CP' has to be
        terminated.
    Error analysis
        An exception occurred which is explained in detail below.
        The exception, which is assigned to class 'CX_WDR_RT_EXCEPTION', was not caught
         and
        therefore caused a runtime error.
        The reason for the exception is:
        Navigation in Phase WDDOMODIFYVIEW Cannot Be Triggered. Component:
        Z_XXP_PERSONAL_DATA, View: OVERVIEW, Window: Z_XXP_PERSONAL_DATA
    Can u plz help me regarding this error.
    Thanks,
    Deepika

    >Navigation in Phase WDDOMODIFYVIEW Cannot Be Triggered
    Looks to me like you are trying to fire a navigation plug within WDDOMODIFYVIEW. According to the rules of the WD Phase Model this is not allowed.

  • Error while executing the application

    Hi Friends,
    I am getting error while executing the application.The error is
    "javax.ejb.EJBException: Transaction aborted; nested exception is: javax.transaction.RollbackException: Transaction marked for rollback."
    Can anybody help me..
    Thanks in advance.

    You need to step through a debugger and find the source of your problem as something is clearly going wrong and causing the transaction to roll back. That is all that message tells us.
    m

  • Runtime Error While executing the WebDynpro Application

    I am getting the Runtime Error While executing the WebDynpro Application. The error message is "TSV_TNEW_OCCURS_NO_ROLL_MEMORY".
    It says like "
    Short text
        No roll storage space of length 9728 available for OCCURS area.
    What happened?
        Each transaction requires some main memory space to process
        application data. If the operating system cannot provide any more
        space, the transaction is terminated.
    But while executing some other Web Dynpro Applications, i am not facing this problem.

    Generally this error is a result of an infinite loop on internal table or select endselect statement where by severs  temporary memory gets full. With no memory to insert new records in temporary memory system generates the dump.
    Check your application or ask basis consultant to look at the memory parameters in instance profile.
    Regards
    Rohit Chowdhary

  • Error while executing SAP E-Commerce Application with UME system

    When attempting to login to the B2B application (http://hostname:port/b2b/init.do), we receive the following error:
    Error while executing SAP E-Commerce Application with UME system; try again to log on. If the problem persists, call our hotline.
    I checked the defaultTrace log and every time the login page is called the following messages are displayed:
    #System.err#sap.com/crm~b2b#System.err#Guest#0##n/a##70cf2ba0756b11df86050003ba827311#SAPEngine_Application_Thread[impl:3]_0##0#0#Error##Plain###com.sap.engine.services.servlets_jsp.server.exceptions.WebIllegalStateException: The output is committed.
    #System.err#sap.com/crm~b2b#System.err#Guest#0##n/a##70cf2ba0756b11df86050003ba827311#SAPEngine_Application_Thread[impl:3]_0##0#0#Error##Plain###  at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:354)#
    another 40 lines of similar text
    When a login is attempted, the following messages are appended to the trace file:
    #tracing.isa.runtime#sap.com/crm~b2b#tracing.isa.runtime#Guest#0##n/a##f6384ec0756b11df81380003ba827311#SAPEngine_Application_Thread[impl:3]_0##0#0#Debug##Plain###[actionxecution]='begin' [actionclass]='com.sap.isa.user.action.PrepareLoginBaseAction' [path]='/preparelogin'#
    tracing.isa.runtime#sap.com/crm~b2b#tracing.isa.runtime#USER1#7439##n/a##f6384ec0756b11df81380003ba827311#SAPEngine_Application_Thread[impl:3]_0##0#0#Debug##Plain###[actionxecution]='end' [actionclass]='com.sap.isa.user.action.PrepareLoginBaseAction' [path]='/preparelogin' [forward]='/login.do' [exectime]='42'#
    #tracing.isa.runtime#sap.com/crm~b2b#tracing.isa.runtime#USER1#7439##n/a##f6384ec0756b11df81380003ba827311#SAPEngine_Application_Thread[impl:3]_0##0#0#Debug##Plain###[jcofuncionexecution]='begin' [funcname]='CRM_ISA_SSO_LOGIN_CHECKS' [ashost]='<hostname>' [sysid]='CRM'#
    #tracing.isa.runtime#sap.com/crm~b2b#tracing.isa.runtime#USER1#7439##<hostname>_CJM_678801250#USER1#f6384ec0756b11df81380003ba827311#SAPEngine_Application_Thread[impl:3]_0##0#0#Debug##Plain###[jcofunctionexecution]='end' [funcname]='CRM_ISA_SSO_LOGIN_CHECKS' [ashost]='<hostname>' [sysid]='CRM' [exectime]='12'#
    I have modified the userid and hostname in the above trace output.
    Does anyone know how we can debug this issue further?
    Thanks,
    Setu

    Hi,
    Are you using UME login type for your B2B Scenario?
    In your B2B XCM setting have you selected UME related login type?
    eCommerce Developer

  • Web Analysis Error -- Error while executing query and retrieving data

    Regarding Web Analysis:
    We have a number of reports that we created. yesterday they were all working fine. today we try to open them and most are generating an error.
    The error is:
    Error while executing query and retrieving data.; nested exception is:
    com.hyperion.ap.APException: [1033] Native:
    1013033[Thu Oct 22 09:08:17
    2009]server name/application name/database name/user name/Error91013033)
    ReportWriter exit abnormally
    Does anyone have any insight into what is going on?
    My version information is:
    Hyperion System 9 BI+ Analytic Administration Services 9.3.0.1.1 Build 2
    Web Analysis 9.3.0.0.0.286
    Thanks in advance for your help.
    DaveW

    Hi,
    And also click on check option by opening the query in Query designer,as Mr . Arun suggested.
    And if you get any error in checking, see the long message(detail).
    With rgds,
    Anil Kumar Sharma .P

  • Error while executing the compilation process

    Hi,
    ISA Framework: com.sap.engine.services.servlets_jsp.server.jsp.exceptions.CompilingException: Error while executing the compilation process:  javac: invalid flag: "/usr/sap/CJP/J06/j2ee/cluster/server2/apps/sap.com/crm~isauseradm/servlet_jsp/isauseradm/work/jsp_login XXXXXXXXXXX.java" Usage: javac <options> <source files> where possible options include: -g Generate all debugging info -g:none Generate no debugging info -g:{lines,vars,source} Generate only some debugging info -nowarn Generate no warnings -verbose Output messages about what the compiler is doing -deprecation Output source locations where deprecated APIs are used -classpath <path> Specify where to find user class files -sourcepath <path> Specify where to find input source files -bootclasspath <path> Override location of bootstrap class files -extdirs <dirs> Override location of installed extensions -d <directory> Specify where to place generated class files -encoding <encoding> Specify character encoding used by source files -source <release> Provide source compatibility with specified release -target <release> Generate class files for specific VM version -help Print a synopsis of standard options ].
    We get this message periodically then we login to isauseradm-application or shopadmin-application.
    How we can solve this issue? Why it's appears in system?
    /nwa shows this error:
    Process after commit failed - may be hanging internal locks mut be removed manually.
    Where I can see hanging internal locks ?
    Denis

    to add some information,
    in runtime workbench, component monitoring, performance monitoring and all other thing except message monitoring is OK.

  • Exchange Server Information Store has encountered an error while executing a full-text index query

    Hi Team need help
    Exchange 2013 EAC doesnt show the databases and it gives message
    "Your request couldn't be completed. Please try again in a few minutes."
    Its a 9 Node DAG and I stopped and diabled Search and Search Host controller on all of them
    in the event viewer see a lot of Event id 1012
    Log Name:      Application
    Source:        MSExchangeIS
    Date:          4/1/2013 9:23:48 AM
    Event ID:      1012
    Task Category: General
    Level:         Error
    Keywords:      Classic
    User:          N/A
    Computer:      ex1301.dagdc.com
    Description:
    Exchange Server Information Store has encountered an error while executing a full-text index query ("and(or(itemclass:string("IPM.Note*", mode="and"), itemclass:string("IPM.Schedule.Meeting*", mode="and"), itemclass:string("IPM.OCTEL.VOICE*",
    mode="and"), itemclass:string("IPM.VOICENOTES*", mode="and")), subject:string("SearchQueryStxProbe*", mode="and"), folderid:string("48A300C7FBA4DA408B80EB019A1CE94900000000000E0000"))"). Error
    information: System.TimeoutException: Failed to open a channel.
       at Microsoft.Exchange.Search.OperatorSchema.PagingImsFlowExecutor.ExecuteServiceCall(IProcessingEngineChannel& serviceProxy, Action`1 call, Int32 retryCount)
       at Microsoft.Exchange.Search.OperatorSchema.PagingImsFlowExecutor.ExecuteSearchFlow(String flowName, Dictionary`2 inputData)
       at Microsoft.Exchange.Search.OperatorSchema.PagingImsFlowExecutor.<ExecuteInternal>d__18.MoveNext()
       at Microsoft.Exchange.Search.OperatorSchema.PagingImsFlowExecutor.<ExecuteSimple>d__a.MoveNext()
       at Microsoft.Exchange.Server.Storage.FullTextIndex.FullTextIndexQuery.ExecutePagedFullTextIndexQuery(Guid databaseGuid, Guid mailboxGuid, Int32 mailboxNumber, String query, CultureInfo culture, Guid correlationId, QueryLoggingContext loggingContext,
    PagedQueryResults pagedQueryResults)
       at Microsoft.Exchange.Server.Storage.StoreCommonServices.StoreFullTextIndexHelper.ExecuteFullTextIndexQuery(Context context, MailboxState mailboxState, QueryParameters queryParameters, PagedQueryResults pagedQueryResults, ExchangeId searchFolderId,
    SearchExecutionDiagnostics diagnostics)
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
      <System>
        <Provider Name="MSExchangeIS" />
        <EventID Qualifiers="49156">1012</EventID>
        <Level>2</Level>
        <Task>1</Task>
        <Keywords>0x80000000000000</Keywords>
        <TimeCreated SystemTime="2013-04-01T16:23:48.000000000Z" />
        <EventRecordID>192599</EventRecordID>
        <Channel>Application</Channel>
        <Computer>ex1301.dagdc.com</Computer>
        <Security />
      </System>
      <EventData>
        <Data>and(or(itemclass:string("IPM.Note*", mode="and"), itemclass:string("IPM.Schedule.Meeting*", mode="and"), itemclass:string("IPM.OCTEL.VOICE*", mode="and"), itemclass:string("IPM.VOICENOTES*",
    mode="and")), subject:string("SearchQueryStxProbe*", mode="and"), folderid:string("48A300C7FBA4DA408B80EB019A1CE94900000000000E0000"))</Data>
        <Data>System.TimeoutException: Failed to open a channel.
       at Microsoft.Exchange.Search.OperatorSchema.PagingImsFlowExecutor.ExecuteServiceCall(IProcessingEngineChannel&amp; serviceProxy, Action`1 call, Int32 retryCount)
       at Microsoft.Exchange.Search.OperatorSchema.PagingImsFlowExecutor.ExecuteSearchFlow(String flowName, Dictionary`2 inputData)
       at Microsoft.Exchange.Search.OperatorSchema.PagingImsFlowExecutor.&lt;ExecuteInternal&gt;d__18.MoveNext()
       at Microsoft.Exchange.Search.OperatorSchema.PagingImsFlowExecutor.&lt;ExecuteSimple&gt;d__a.MoveNext()
       at Microsoft.Exchange.Server.Storage.FullTextIndex.FullTextIndexQuery.ExecutePagedFullTextIndexQuery(Guid databaseGuid, Guid mailboxGuid, Int32 mailboxNumber, String query, CultureInfo culture, Guid correlationId, QueryLoggingContext loggingContext,
    PagedQueryResults pagedQueryResults)
       at Microsoft.Exchange.Server.Storage.StoreCommonServices.StoreFullTextIndexHelper.ExecuteFullTextIndexQuery(Context context, MailboxState mailboxState, QueryParameters queryParameters, PagedQueryResults pagedQueryResults, ExchangeId searchFolderId,
    SearchExecutionDiagnostics diagnostics)</Data>
        <Binary>5B444941475F4354585D000084000000FF09000000000000000268000000808A00100000000080CA00100000000080B200100000000080D200100000000030FF001000000000309F00100000000030DF001000000000B09D001000000000B0DD001000000000B0ED001000000000B08D001000000000B095001000000000B0A5001000000000</Binary>
      </EventData>
    </Event>

    Hi,
    Please reenable and start the search engine service and try again.
    The simillar case for your reference:
    http://social.technet.microsoft.com/Forums/en-US/exchangesvrgeneral/thread/4f43ef50-b71f-4ab3-8ced-70f1c36c5509
    Hope it is hlepful.
    Fiona Liao
    TechNet Community Support

  • Error while executing the workbook query.

    Hi guyz
    i'm getting an error while executing the workbook Query. The actual problem is there is a filter for REQUID in the query definition for removing the doble count. there is customer exit written. the report works fine in DEVELOPMENT but it is not working in quality.
    The query on which this workbook is created is working fine, but the problem is when we execute the workbook i'm facing this issue.
    we re-transported the queries but still we are facing the same problem.
    while we execute the query we are prompted for variable entry(Optional) for date. when we press OK we get the below error
    " NO SID value found for the value REQU_4DQT75Y2RJPVT4PXZ4LHC70V3 of characteristic"
    the request is not available in the BW system. the request was deleted long back, but it is still referring to the same the request id
    could someone please tell me where we went wrong and why we are getting this error.
    Regards,
    Anil Vadde

    Hey ,I think data load to your target on which the query was based had some issue.
    Can you check the data load to the data target.change the status of request concerned to red and delete.do reconstruct if neeed..I think the request had some issue.
    Even you can go to RSRQ or RSMO and filter on the basis of this request and see its status.
    Regards,
    RK

  • Error while executing agent.  ORABPEL-05006

    Hi:
    I have a bpel process waiting until a DbAdapter (with one Wait Activity) reads a record on database, but the problem is :
    - The record is in the database
    - The DbAdapter read it but the process don´t continue.
    - If the process is monitored by the Bpel Console it seems like it is waiting for the expiration of the wait activity, but the expiration time is reached.
    When i restart the OC4J_BPEL the process that was waiting , continues.
    i was looking the log file of the oc4j and it throws the following exception, could anybody help me??
    Thanks
    Santiago Velez.
    <2006-11-08 13:43:26,871> <INFO> <default.collaxa.cube.ws> <AdapterFramework::Outbound> file:/data2/middle/integration/orabpel/domains/default/tmp/.bpel_PG-ComunicacionATC_1.0.jar/InsertaAtcsComunicados.wsdl [ InsertaAtcsComunicados_ptt::insert(AtcsComunicadosCollection) ] - Using JCA Connection Pool - max size = <unbounded>
    <ExpirationJob::execute> Error while executing agent.
    An error occured while attempting to execute the job "111499-BpWai0-BpSwt1.22-1" for agent "scheduler". The exception reported was : Dispatcher schedule error.
    An error occurred while scheduling a batch message with the dispatcher. The exception is: Failed to create "ejb/collaxa/system/DispatcherBean" bean; exception reported is: "javax.naming.NamingException: Not in an application scope - start Orion with the -userThreads switch if using user-created threads
    at com.evermind.server.PreemptiveApplicationContext.getContext(PreemptiveApplicationContext.java:34)
    at com.evermind.naming.FilterContext.lookup(FilterContext.java:138)
    at javax.naming.InitialContext.lookup(InitialContext.java:347)
    at com.collaxa.cube.engine.util.EngineBeanRegistry.lookupDispatcherBean(EngineBeanRegistry.java:137)
    at com.collaxa.cube.engine.dispatch.DispatchHelper.scheduleRemote(DispatchHelper.java:348)
    at com.collaxa.cube.engine.agents.ExpirationAgent$ExpirationJob.execute(ExpirationAgent.java:417)
    at org.quartz.core.JobRunShell.run(JobRunShell.java:141)
    at org.quartz.simpl.SimpleThreadPool$WorkerThread.run(SimpleThreadPool.java:281)
    ORABPEL-05006
    Dispatcher schedule error.
    An error occurred while scheduling a batch message with the dispatcher. The exception is: Failed to create "ejb/collaxa/system/DispatcherBean" bean; exception reported is: "javax.naming.NamingException: Not in an application scope - start Orion with the -userThreads switch if using user-created threads
    at com.evermind.server.PreemptiveApplicationContext.getContext(PreemptiveApplicationContext.java:34)
    at com.evermind.naming.FilterContext.lookup(FilterContext.java:138)
    at javax.naming.InitialContext.lookup(InitialContext.java:347)
    at com.collaxa.cube.engine.util.EngineBeanRegistry.lookupDispatcherBean(EngineBeanRegistry.java:137)
    at com.collaxa.cube.engine.dispatch.DispatchHelper.scheduleRemote(DispatchHelper.java:348)
    at com.collaxa.cube.engine.agents.ExpirationAgent$ExpirationJob.execute(ExpirationAgent.java:417)
    at org.quartz.core.JobRunShell.run(JobRunShell.java:141)
    at org.quartz.simpl.SimpleThreadPool$WorkerThread.run(SimpleThreadPool.java:281)
    at com.collaxa.cube.engine.dispatch.DispatchHelper.scheduleRemote(DispatchHelper.java:354)
    at com.collaxa.cube.engine.agents.ExpirationAgent$ExpirationJob.execute(ExpirationAgent.java:417)
    at org.quartz.core.JobRunShell.run(JobRunShell.java:141)
    at org.quartz.simpl.SimpleThreadPool$WorkerThread.run(SimpleThreadPool.java:281)

    anybody have comments on this????????????

  • Error while executing report in query designer

    Dear Folks,
    I am geting following error while executing report in query designer.
    Error:500 E
    an exception raised because of 0analysis pattern.
    Hence,i am unable to execute any report.
    Need help.
    Thanks

    Hi Kitu G,
    I think this is something to do with the bex web 0ANALYSIS* objects not being installed in your BW system.
    I would try and do the following:
    - Goto RSA1 > BI Content > BEx Web Template (BTMP)
    - Then double-click on Select Object.
    - Highlight all objects that start with 0ANALYSIS_PATTERN
    - Click on Transfer Selections, and then Install.
    If you can't do the above in prd, do it in DEV, then transport the objects to prd.
    After all this, try re-running your queries.
    Any questions/clarification just let me know
    Cheers.
    Darwin

  • Strange error while executing a stored procedure: Incorrect syntax near '@p0'

    All, I am getting a strange error while executing a stored procedure: Incorrect syntax near '@p0'  using JDBC CallableStatment.
    Here is my code...
    CallableStatement cStmt = con.prepareCall("{call SET CHAINED ON EXEC <dbName>.<schemaName>.<SPName> (?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?)}");
    cStmt.setString(1, "2012005881");
    cStmt.setString(2, "07");
    cStmt.setString(3, "10");
    cStmt.setString(4, "Case title");
    cStmt.setString(5, "Open");
    java.sql.Date dt1 = new java.sql.Date(2014,10,20);
    cStmt.setDate(6, dt1);
    cStmt.setString(7, "01");
    cStmt.setString(8, "N");
    cStmt.setString(9, "ADA Test");
    cStmt.setString(10, "N");
    cStmt.setString(11, "English");
    cStmt.setString(12, "N");
    cStmt.setString(13, "N");
    cStmt.setString(14, "N");
    cStmt.setString(15, "N");
    cStmt.setString(16, "N");
    cStmt.setString(17, "N");
    cStmt.setString(18, "07");
    cStmt.setString(19, "10");
    cStmt.setString(20, "juache0");
    java.sql.Date dt2 = new java.sql.Date(2014,10,20);
    java.sql.Date dt3 = new java.sql.Date(2014,10,20);
    cStmt.setDate(21, dt2);
    cStmt.setDate(22, dt3);
    cStmt.setString(23, "userid0");
    cStmt.setString(24, "");
    cStmt.setString(25, "");  
    cStmt.setString(26, "");
    java.math.BigDecimal bg1 = new java.math.BigDecimal(10);
    cStmt.setBigDecimal(27, bg1);
    cStmt.setString(28, "userid");
    cStmt.setString(29, "userid");
    int hadResults = cStmt.executeUpdate();
    Your help is greatly appreciated.
    I am executing the above using Jconnect3.0 driver, inside WebSphere Application Server V8.0
    Thanks
    Nags

    NOTE: I don't work with JDBC/jConnect so (at this point) just some questions ...
    1 - are you sending this to ASE, ASA, IQ, or some other RDBMS?
    2 - what is the value of <schemaname>?
    3 - do you have other prepareCall() instances that successfully call a stored proc? [would be interesting to see if there's a difference in the format of the calls]
    A quick google search shows a couple ways to submit a stored proc execution to the RDBMS, with the format depending on the format expected by the target RDBMS.
    I'm wondering if you really need/want the parentheses around the argument list, ie, what happens if you change
    from
    -- parentheses around args
    EXEC <dbName>.<schemaName>.<SPName> ( ?,?,?,?,?,...,? )
    to
    -- no parentheses around args
    EXEC <dbName>.<schemaName>.<SPName> ?,?,?,?,?,...,?
    In ASE if I wrap the parameters in parentheses I get the same error you're getting:
    ================== w/ parentheses => error
    1> sp_who (sa)
    2> go
    Msg 102, Level 15, State 1:
    Server 'CC1_V1', Line 1:
    Incorrect syntax near 'sa'.   <<=== sa == @p0 ??
    ================== w/out parentheses => works
    1> sp_who sa
    2> go
    fid spid status  loginame origname ...
       0   17 running sa       sa       ...
    ==================

  • Error while executing web part: System.InvalidProgramException: Common Language Runtime detected an invalid program.

    hello,
    we have 3 server sharepoint 2010 farm as a live system and a 1 server for development and test system. I've got a problem with one of our portals that gives correlation ID (in 2 or 3 times a week) on all my dataview web parts (total 8 Dataview
    WP) until i make IIS reset for that portal. (but same portal works like magic on test system over 3 weeks now). there is no custom code in the page other than the customized masterpage and css. and just reseting the IIS solves the problem for a couple
    of days but i need to fix that permanantly. if anyone can help me about that i will be happy. thank you all in advance.
    here is the log for the correlation ID;
    11/08/2011 09:40:11.72  w3wp.exe (0x1AF4)                        0x0BB4 SharePoint Foundation        
     Logging Correlation Data       xmnv Medium   Name=Request (GET:http://www.efesithelpdesk.com:80/defaulttr.aspx) 841eadfa-2a71-4cd3-85a4-7b1e3d75355f
    11/08/2011 09:40:11.79  w3wp.exe (0x1AF4)                        0x0BB4 SharePoint Foundation        
     Monitoring                     b4ly High     Leaving Monitored Scope (GetFileAndMetaInfo). Execution Time=63,946744628158 841eadfa-2a71-4cd3-85a4-7b1e3d75355f
    11/08/2011 09:40:11.79  w3wp.exe (0x1AF4)                        0x0BB4 SharePoint Foundation        
     Monitoring                     b4ly High     Leaving Monitored Scope (GetWebPartPageContent). Execution Time=64,2515319684485 841eadfa-2a71-4cd3-85a4-7b1e3d75355f
    11/08/2011 09:40:11.79  w3wp.exe (0x1AF4)                        0x0BB4 SharePoint Foundation        
     Logging Correlation Data       xmnv Medium   Site=/ 841eadfa-2a71-4cd3-85a4-7b1e3d75355f
    11/08/2011 09:40:11.79  w3wp.exe (0x1AF4)                        0x0BB4 SharePoint Foundation        
     Monitoring                     b4ly High     Leaving Monitored Scope (PostResolveRequestCacheHandler). Execution Time=65.3603321092485 841eadfa-2a71-4cd3-85a4-7b1e3d75355f
    11/08/2011 09:40:12.22  w3wp.exe (0x1AF4)                        0x0BB4 SharePoint Foundation        
     Monitoring                     b4ly High     Leaving Monitored Scope (EnsureListItemsData). Execution Time=361.680395134018 841eadfa-2a71-4cd3-85a4-7b1e3d75355f
    11/08/2011 09:40:12.25  w3wp.exe (0x1AF4)                        0x0BB4 SharePoint Foundation        
     Web Parts                      89a1 High     Error while executing web part: System.InvalidProgramException: Common Language
    Runtime detected an invalid program.     at Execute(XmlQueryRuntime )     at System.Xml.Xsl.XmlILCommand.Execute(Object defaultDocument, XmlResolver dataSources, XsltArgumentList argumentList, XmlWriter writer, Boolean
    closeWriter)     at System.Xml.Xsl.XmlILCommand.Execute(IXPathNavigable contextDocument, XmlResolver dataSources, XsltArgumentList argumentList, XmlWriter results)     at System.Xml.Xsl.XslCompiledTransform.Transform(IXPathNavigable
    input, XsltArgumentList arguments, XmlWriter results)     at Microsoft.SharePoint.WebPartPages.DataFormWebPart.ExecuteTransform(XslCompiledTransform xslCompiledTransform, XsltArgumentList xmlArguments, Boolean bDeferExecuteTransform)    
    at Microsoft.SharePoint.WebPar... 841eadfa-2a71-4cd3-85a4-7b1e3d75355f
    11/08/2011 09:40:12.25* w3wp.exe (0x1AF4)                        0x0BB4 SharePoint Foundation        
     Web Parts                      89a1 High     ...tPages.DataFormWebPart.PrepareAndPerformTransform(Boolean bDeferExecuteTransform) 841eadfa-2a71-4cd3-85a4-7b1e3d75355f
    11/08/2011 09:40:12.25  w3wp.exe (0x1AF4)                        0x0BB4 SharePoint Foundation        
     Monitoring                     b4ly High     Leaving Monitored Scope (DataBinding DataFormWebPart (HelpDesk)). Execution Time=391.723110060077 841eadfa-2a71-4cd3-85a4-7b1e3d75355f
    11/08/2011 09:40:12.25  w3wp.exe (0x1AF4)                        0x0BB4 SharePoint Foundation        
     Monitoring                     b4ly High     Leaving Monitored Scope (Activate web part connections). Execution Time=416.389513192319 841eadfa-2a71-4cd3-85a4-7b1e3d75355f
    11/08/2011 09:40:12.28  w3wp.exe (0x1AF4)                        0x0BB4 SharePoint Foundation        
     Web Parts                      89a1 High     Error while executing web part: System.InvalidProgramException: Common Language
    Runtime detected an invalid program.     at Execute(XmlQueryRuntime )     at System.Xml.Xsl.XmlILCommand.Execute(Object defaultDocument, XmlResolver dataSources, XsltArgumentList argumentList, XmlWriter writer, Boolean
    closeWriter)     at System.Xml.Xsl.XmlILCommand.Execute(IXPathNavigable contextDocument, XmlResolver dataSources, XsltArgumentList argumentList, XmlWriter results)     at System.Xml.Xsl.XslCompiledTransform.Transform(IXPathNavigable
    input, XsltArgumentList arguments, XmlWriter results)     at Microsoft.SharePoint.WebPartPages.DataFormWebPart.ExecuteTransform(XslCompiledTransform xslCompiledTransform, XsltArgumentList xmlArguments, Boolean bDeferExecuteTransform)    
    at Microsoft.SharePoint.WebPar... 841eadfa-2a71-4cd3-85a4-7b1e3d75355f
    11/08/2011 09:40:12.28* w3wp.exe (0x1AF4)                        0x0BB4 SharePoint Foundation        
     Web Parts                      89a1 High     ...tPages.DataFormWebPart.PrepareAndPerformTransform(Boolean bDeferExecuteTransform) 841eadfa-2a71-4cd3-85a4-7b1e3d75355f
    11/08/2011 09:40:12.30  w3wp.exe (0x1AF4)                        0x0BB4 SharePoint Foundation        
     Monitoring                     b4ly High     Leaving Monitored Scope (EnsureListItemsData). Execution Time=18.8157992147047 841eadfa-2a71-4cd3-85a4-7b1e3d75355f
    11/08/2011 09:40:12.34  w3wp.exe (0x1AF4)                        0x0BB4 SharePoint Foundation        
     Web Parts                      89a1 High     Error while executing web part: System.InvalidProgramException: Common Language
    Runtime detected an invalid program.     at Execute(XmlQueryRuntime )     at System.Xml.Xsl.XmlILCommand.Execute(Object defaultDocument, XmlResolver dataSources, XsltArgumentList argumentList, XmlWriter writer, Boolean
    closeWriter)     at System.Xml.Xsl.XmlILCommand.Execute(IXPathNavigable contextDocument, XmlResolver dataSources, XsltArgumentList argumentList, XmlWriter results)     at System.Xml.Xsl.XslCompiledTransform.Transform(IXPathNavigable
    input, XsltArgumentList arguments, XmlWriter results)     at Microsoft.SharePoint.WebPartPages.DataFormWebPart.ExecuteTransform(XslCompiledTransform xslCompiledTransform, XsltArgumentList xmlArguments, Boolean bDeferExecuteTransform)    
    at Microsoft.SharePoint.WebPar... 841eadfa-2a71-4cd3-85a4-7b1e3d75355f
    11/08/2011 09:40:12.34* w3wp.exe (0x1AF4)                        0x0BB4 SharePoint Foundation        
     Web Parts                      89a1 High     ...tPages.DataFormWebPart.PrepareAndPerformTransform(Boolean bDeferExecuteTransform) 841eadfa-2a71-4cd3-85a4-7b1e3d75355f
    11/08/2011 09:40:12.34  w3wp.exe (0x1AF4)                        0x0BB4 SharePoint Foundation        
     Monitoring                     b4ly High     Leaving Monitored Scope (DataBinding DataFormWebPart (Related Items in Approves)).
    Execution Time=56.5768833748423 841eadfa-2a71-4cd3-85a4-7b1e3d75355f
    11/08/2011 09:40:12.36  w3wp.exe (0x1AF4)                        0x0BB4 SharePoint Foundation        
     Monitoring                     b4ly High     Leaving Monitored Scope (EnsureListItemsData). Execution Time=16.99475771362 841eadfa-2a71-4cd3-85a4-7b1e3d75355f
    11/08/2011 09:40:12.41  w3wp.exe (0x1AF4)                        0x0BB4 SharePoint Foundation        
     Web Parts                      89a1 High     Error while executing web part: System.InvalidProgramException: Common Language
    Runtime detected an invalid program.     at Execute(XmlQueryRuntime )     at System.Xml.Xsl.XmlILCommand.Execute(Object defaultDocument, XmlResolver dataSources, XsltArgumentList argumentList, XmlWriter writer, Boolean
    closeWriter)     at System.Xml.Xsl.XmlILCommand.Execute(IXPathNavigable contextDocument, XmlResolver dataSources, XsltArgumentList argumentList, XmlWriter results)     at System.Xml.Xsl.XslCompiledTransform.Transform(IXPathNavigable
    input, XsltArgumentList arguments, XmlWriter results)     at Microsoft.SharePoint.WebPartPages.DataFormWebPart.ExecuteTransform(XslCompiledTransform xslCompiledTransform, XsltArgumentList xmlArguments, Boolean bDeferExecuteTransform)    
    at Microsoft.SharePoint.WebPar... 841eadfa-2a71-4cd3-85a4-7b1e3d75355f
    11/08/2011 09:40:12.41* w3wp.exe (0x1AF4)                        0x0BB4 SharePoint Foundation        
     Web Parts                      89a1 High     ...tPages.DataFormWebPart.PrepareAndPerformTransform(Boolean bDeferExecuteTransform) 841eadfa-2a71-4cd3-85a4-7b1e3d75355f
    11/08/2011 09:40:12.41  w3wp.exe (0x1AF4)                        0x0BB4 SharePoint Foundation        
     Monitoring                     b4ly High     Leaving Monitored Scope (DataBinding DataFormWebPart (Related Items in Tasks)).
    Execution Time=59.0992011554541 841eadfa-2a71-4cd3-85a4-7b1e3d75355f
    11/08/2011 09:40:12.43  w3wp.exe (0x1AF4)                        0x0BB4 SharePoint Foundation        
     Monitoring                     b4ly High     Leaving Monitored Scope (EnsureListItemsData). Execution Time=20.8265994700444 841eadfa-2a71-4cd3-85a4-7b1e3d75355f
    11/08/2011 09:40:12.44  w3wp.exe (0x1AF4)                        0x0BB4 SharePoint Foundation        
     Web Parts                      89a1 High     Error while executing web part: System.InvalidProgramException: Common Language
    Runtime detected an invalid program.     at Execute(XmlQueryRuntime )     at System.Xml.Xsl.XmlILCommand.Execute(Object defaultDocument, XmlResolver dataSources, XsltArgumentList argumentList, XmlWriter writer, Boolean
    closeWriter)     at System.Xml.Xsl.XmlILCommand.Execute(IXPathNavigable contextDocument, XmlResolver dataSources, XsltArgumentList argumentList, XmlWriter results)     at System.Xml.Xsl.XslCompiledTransform.Transform(IXPathNavigable
    input, XsltArgumentList arguments, XmlWriter results)     at Microsoft.SharePoint.WebPartPages.DataFormWebPart.ExecuteTransform(XslCompiledTransform xslCompiledTransform, XsltArgumentList xmlArguments, Boolean bDeferExecuteTransform)    
    at Microsoft.SharePoint.WebPar... 841eadfa-2a71-4cd3-85a4-7b1e3d75355f
    11/08/2011 09:40:12.44* w3wp.exe (0x1AF4)                        0x0BB4 SharePoint Foundation        
     Web Parts                      89a1 High     ...tPages.DataFormWebPart.PrepareAndPerformTransform(Boolean bDeferExecuteTransform) 841eadfa-2a71-4cd3-85a4-7b1e3d75355f
    11/08/2011 09:40:12.46  w3wp.exe (0x1AF4)                        0x0BB4 SharePoint Foundation        
     Monitoring                     b4ly High     Leaving Monitored Scope (EnsureListItemsData). Execution Time=18.1539832576487 841eadfa-2a71-4cd3-85a4-7b1e3d75355f
    11/08/2011 09:40:12.47  w3wp.exe (0x1AF4)                        0x0BB4 SharePoint Foundation        
     Web Parts                      89a1 High     Error while executing web part: System.InvalidProgramException: Common Language
    Runtime detected an invalid program.     at Execute(XmlQueryRuntime )     at System.Xml.Xsl.XmlILCommand.Execute(Object defaultDocument, XmlResolver dataSources, XsltArgumentList argumentList, XmlWriter writer, Boolean
    closeWriter)     at System.Xml.Xsl.XmlILCommand.Execute(IXPathNavigable contextDocument, XmlResolver dataSources, XsltArgumentList argumentList, XmlWriter results)     at System.Xml.Xsl.XslCompiledTransform.Transform(IXPathNavigable
    input, XsltArgumentList arguments, XmlWriter results)     at Microsoft.SharePoint.WebPartPages.DataFormWebPart.ExecuteTransform(XslCompiledTransform xslCompiledTransform, XsltArgumentList xmlArguments, Boolean bDeferExecuteTransform)    
    at Microsoft.SharePoint.WebPar... 841eadfa-2a71-4cd3-85a4-7b1e3d75355f
    11/08/2011 09:40:12.47* w3wp.exe (0x1AF4)                        0x0BB4 SharePoint Foundation        
     Web Parts                      89a1 High     ...tPages.DataFormWebPart.PrepareAndPerformTransform(Boolean bDeferExecuteTransform) 841eadfa-2a71-4cd3-85a4-7b1e3d75355f
    11/08/2011 09:40:12.49  w3wp.exe (0x1AF4)                        0x0BB4 SharePoint Foundation        
     Monitoring                     b4ly High     Leaving Monitored Scope (EnsureListItemsData). Execution Time=13.4458429772499 841eadfa-2a71-4cd3-85a4-7b1e3d75355f
    11/08/2011 09:40:12.49  w3wp.exe (0x1AF4)                        0x0BB4 SharePoint Foundation        
     Web Parts                      89a1 High     Error while executing web part: System.InvalidProgramException: Common Language
    Runtime detected an invalid program.     at Execute(XmlQueryRuntime )     at System.Xml.Xsl.XmlILCommand.Execute(Object defaultDocument, XmlResolver dataSources, XsltArgumentList argumentList, XmlWriter writer, Boolean
    closeWriter)     at System.Xml.Xsl.XmlILCommand.Execute(IXPathNavigable contextDocument, XmlResolver dataSources, XsltArgumentList argumentList, XmlWriter results)     at System.Xml.Xsl.XslCompiledTransform.Transform(IXPathNavigable
    input, XsltArgumentList arguments, XmlWriter results)     at Microsoft.SharePoint.WebPartPages.DataFormWebPart.ExecuteTransform(XslCompiledTransform xslCompiledTransform, XsltArgumentList xmlArguments, Boolean bDeferExecuteTransform)    
    at Microsoft.SharePoint.WebPar... 841eadfa-2a71-4cd3-85a4-7b1e3d75355f
    11/08/2011 09:40:12.49* w3wp.exe (0x1AF4)                        0x0BB4 SharePoint Foundation        
     Web Parts                      89a1 High     ...tPages.DataFormWebPart.PrepareAndPerformTransform(Boolean bDeferExecuteTransform) 841eadfa-2a71-4cd3-85a4-7b1e3d75355f
    11/08/2011 09:40:12.52  w3wp.exe (0x1AF4)                        0x0BB4 SharePoint Foundation        
     Monitoring                     b4ly High     Leaving Monitored Scope (EnsureListItemsData). Execution Time=23.1282886512113 841eadfa-2a71-4cd3-85a4-7b1e3d75355f
    11/08/2011 09:40:12.53  w3wp.exe (0x1AF4)                        0x0BB4 SharePoint Foundation        
     Web Parts                      89a1 High     Error while executing web part: System.InvalidProgramException: Common Language
    Runtime detected an invalid program.     at Execute(XmlQueryRuntime )     at System.Xml.Xsl.XmlILCommand.Execute(Object defaultDocument, XmlResolver dataSources, XsltArgumentList argumentList, XmlWriter writer, Boolean
    closeWriter)     at System.Xml.Xsl.XmlILCommand.Execute(IXPathNavigable contextDocument, XmlResolver dataSources, XsltArgumentList argumentList, XmlWriter results)     at System.Xml.Xsl.XslCompiledTransform.Transform(IXPathNavigable
    input, XsltArgumentList arguments, XmlWriter results)     at Microsoft.SharePoint.WebPartPages.DataFormWebPart.ExecuteTransform(XslCompiledTransform xslCompiledTransform, XsltArgumentList xmlArguments, Boolean bDeferExecuteTransform)    
    at Microsoft.SharePoint.WebPar... 841eadfa-2a71-4cd3-85a4-7b1e3d75355f
    11/08/2011 09:40:12.53* w3wp.exe (0x1AF4)                        0x0BB4 SharePoint Foundation        
     Web Parts                      89a1 High     ...tPages.DataFormWebPart.PrepareAndPerformTransform(Boolean bDeferExecuteTransform) 841eadfa-2a71-4cd3-85a4-7b1e3d75355f
    11/08/2011 09:40:12.57  w3wp.exe (0x1AF4)                        0x0BB4 SharePoint Foundation        
     Monitoring                     b4ly Medium   Leaving Monitored Scope (Request (GET:http://www.efesithelpdesk.com:80/defaulttr.aspx)). Execution
    Time=845.499567682485 841eadfa-2a71-4cd3-85a4-7b1e3d75355f

    Nicholas Mulder's summary is exactly the issue our server is facing. App pool recycle kicks-off at 2:04am and by 2:06am all our data view web parts are displaying "Unable to display web part ..." I get the same error messages in ULS logs every
    time it recycles, however it is able to correct itself some of the time. The other times which is every few days, the web parts never come back up.
    Here are a few lines from the log leading up to the recycle and a few after.
    -The application domain /LM/W3SVC/1304874868/ROOT-1-130058022909222844 is unloading and going to be recycled.
    -Shutdown Reason: HostingEnvironment initiated shutdown  HostingEnvironment caused shutdown
    -AppDomain shutdown initiated
    -Flushing connection pool 'Data Source=SPSQL;Initial Catalog=SharePoint_Config;Integrated Security=True;Enlist=False;Connect Timeout=15'
    -An application domain named /LM/W3SVC/1304874868/ROOT-1-130058174460198926 has just been loaded.
    -Failed to look up string with key "FSAdmin_SiteSettings_UserContextManagement_ToolTip", keyfile Microsoft.Office.Server.Search.
    -Error initializing Safe control - Assembly:Microsoft.Office.SharePoint.ClientExtensions, Version=14.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c TypeName: Microsoft.Office.SharePoint.ClientExtensions.Publishing.TakeListOfflineRibbonControl Error:
    -No webtemp*.xml files found for language 1033 and product version 3.
    -No webtemp*.xml files found for language 1033 and product version 2.
    -Failed to find generic XML file at "C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\Template\SiteTemplates\STS\xml\stdview.xml"
    -Failed to find generic XML file at "C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\Template\SiteTemplates\STS\xml\stdview.xml"
    -Error while executing web part: System.ArgumentOutOfRangeException: Index was out of range. Must be non-negative and less than the size of the collection.
    -Error while executing web part: System.ArgumentException: An item with the same key has already been added.   
    -Error while executing web part: System.NullReferenceException: Object reference not set to an instance of an object.  
    -AddWithFile:DfwpXslFilesHashCache=Microsoft.SharePoint.WebPartPages.CloneableHashTable
    -Error while executing web part: System.InvalidProgramException: Common Language Runtime detected an invalid program. 

  • Error while exporting transport requests

    Dears,
    In our PI 7.1 server,configured with CTS +,We are getting below error while exporting transport requests:
    Caused by: com.sap.tc.di.draft.ts.TsExecutionException: Error executing function (check stacktrace for details): EPS_OPEN_OUTPUT_FILE, (service=com.sap.tms)
    at com.sap.tc.di.draft.cts.impl.adapters.jco.TmsJCoExceptions.throwTsServiceException(TmsJCoExceptions.java:74)
    at com.sap.tc.di.draft.cts.impl.adapters.jco.EpsJCoAdapter.openFile(EpsJCoAdapter.java:98)
    at com.sap.tc.di.draft.cts.impl.adapters.jco.AbapEpsOutputStream.open(AbapEpsOutputStream.java:83)
    ... 40 more
    Caused by: com.sap.conn.jco.AbapException: (126) OPEN_FAILED: OPEN_FAILED
    at com.sap.conn.jco.rt.MiddlewareJavaRfc$JavaRfcClient.execute(MiddlewareJavaRfc.java:1492)
    at com.sap.conn.jco.rt.ClientConnection.execute(ClientConnection.java:1065)
    at com.sap.conn.jco.rt.RfcDestination.execute(RfcDestination.java:987)
    at com.sap.conn.jco.rt.RfcDestination.execute(RfcDestination.java:977)
    at com.sap.conn.jco.rt.AbapFunction.execute(AbapFunction.java:300)
    at com.sap.tc.di.draft.cts.impl.adapters.jco.JCoAdapter.executeFunction(JCoAdapter.java:103)
    at com.sap.tc.di.draft.cts.impl.adapters.jco.EpsJCoAdapter.openFile(EpsJCoAdapter.java:78)
    In SE01 it show tp 12 while releasing request.
    Please suggest.
    Shivam
    Edited by: Shivam Mittal on Mar 16, 2010 1:04 PM

    File Permission Issue.

Maybe you are looking for

  • Deployment order in case of dependent composites.

    If there are two composites Consumer and Provider, where consumer calls the provider, is there any particular order I need to follow during deployment. Looking at Link 1: http://www.javaoracleblog.com/java/AIA_11g_Best_Practices_for_Decoupling_Servic

  • DW 8 not recognizing test server

    I'm trying to set up a test server in Dreamweaver 8 on XP. The web server is IIS running on a Windows server. I am mapped to the drive share where the wwwroot is located. In the "Site Definition" dialog, under testing server, I picked "asp vpscript"

  • Incorrect disk critically low error in LR 3.3

    I have Lightroom 3.3 on a Windows 7 x64 machine. It's started to throw a disk critically low warning every few days for the drive that has my LR catalog on it. The drive has 390GB free Has anyone else seen this before? Is it a known issue? How do I m

  • Nvarchar field in SQL not showing up in BVM

    Hi All, I have some fields which are dclared as nvarchar in SQL and i have used cast function to get them as strings into CR. Now i want to create a Dynamic parameter in BVM. In the Business Element level,i am having the same issue as the data type i

  • Hosted xi remote admin service

    Hi all,     I am getting an error in rwb. If i click communication channel monitoring the page is not displaying . Can any one please help me regarding this.