What is the best approach for a short answer quiz that has a number range as the correct answer?

Client does not want to use multiple choice questions, so I am trying to figure out the best way to put in a range of numbers for the correct answer.

I'm doing my best to figure this out, but not finding success in my advanced action. Below is the quiz question and how I setup the advanced action.
Question: Determine the total heat load for test house 1.
Answer: 32,120
Acceptable Answer Range: 30,514 - 33,726
Created TEB - Validate User Input; Numbers; Variable Name: Value1; Correct Entries box blank; Reporting: Include in Quiz; Points 10; add to total; report answers
     On Focus Lost: Execute Advanced Actions
          Conditional Action
               If
                    Value1 is greater or equal to 30514 AND
                    Value 1 is lesser or equal to 33726
               Then
                    Show SmartShape_1 (Correct feedback prompt)
                    Expression Value1=cpQuizInfoTotalQuizPoints+10  (I have also tried cpQuizInfoTotalProjectPoints and got same results)
               Else
                    Show SmartShape_2 (Incorrect feedback prompt)
I have quiz reporting turned on and I am testing this by including a second slide that is a standard multiple choice question so I can check results on the Quiz Results page at the end of the project showing the total score. I have not been successful yet in getting the system to add the points in appropriately. Is there another system variable I should be using to add the points to the quiz for reporting to the LMS or am i going about this completely wrong?

Similar Messages

  • What is my best approach for SQL Persistence

    Hi There,
    I am currently designing an application that will be database driven. It looks like I will develop the app using MySQL and then the customer will port it to Oracle.
    Which approach should I use for writing my database access code:
    1. Regular JDBC code
    2. Hibernate
    3. Apache Beehive
    4. Some other recommendation
    Any input is greatly appreciated.
    -john

    Thanks for the advice.
    Since my last post I have canned that idea. It turns
    out we have a company license for Oracle that I think
    I can use.Excellent.
    >
    I think I know JDBC decently and I have some college
    Hibernate experience.How long ago was that?
    Since you seem to be the JDBC guru what would you
    recommend? Just JDBC?Dave Minter is twice a Hibernate author - "Beginning Hibernate" and "Pro Hibernate". I recommend both.
    Depends on how well you know JDBC. It's a good start. If you have a good idea of how you'll handle transactions, sequences and keys, and relationships like 1:m and m:n, I'd say hit it in JDBC first. Start with an interface that will allow you to change to a Hibernate implementation if you change your mind. Isolate the SQL code in a well-defined persistence layer.
    %

  • What's the best approach for handeling about 1300 connections in Oracle.

    What's the best approach for handling about 1300 connections in Oracle 9i/10g through a Java application?
    1.Using separate schema s for various type users(We can store only relevant data with a particular schema.     Then No. of records per table can be reduced by replicating tables but we have to maintain all data with a another schema     Then we need update two schema s for a given session.Because we maintain separate scheama for a one user and another schema for all data and then there may be Updating problems)
    OR
    2. Using single schema for all users.
    Note: All users may access the same tables and there may be lot of records than previous case.
    What is the Best case.
    Please give Your valuable ideas

    It is a true but i want a solution from you all.I want you to tell me how to fix my friends car.

  • What are the best approaches for mapping re-start in OWB?

    What are the best approaches for mapping re-start in OWB?
    We are using OWB repository 10.2.0.1.0 and OWB client 10.2.0.1.31. The Oracle version is 10 G (10.2.0.3.0). OWB is installed on Linux.
    We have number of mappings. We built process flows for mappings as well.
    I like to know, what are the best approches to incorportate re-start options in our process. ie a failure of mapping in process flow.
    How do we re-cycle failed rows?
    Are there any builtin features/best approaches in OWB to implement the above?
    Does runtime audit tables help us to build re-start process?
    If not, do we need to maintain our own tables (custom) to maintain such data?
    How did our forum members handled above situations?
    Any idea ?
    Thanks in advance.
    RI

    Hi RI,
    How many mappings (range) do you have in a process flows?Several hundreds (100-300 mappings).
    If we have three mappings (eg m1, m2, m3) in process flow. What will happen if m2 fails?Suppose mappings connected sequentially (m1 -> m2 -> m3). When m2 fails then processflow is suspended (transition to m3 will not be performed). You should obviate cause of error (modify mapping and redeploy, correct data, etc) and then repeat m2 mapping execution from Workflow monitor - open diagram with processflow, select mapping m2 and click button Expedite, choose option Repeat.
    In re-start, will it run m1 again and m2 son on, or will it re-start at row1 of m2?You can specify restart point. "at row1 of m2" - I don't understand what you mean (all mappings run in Set based mode, so in case of error all table updates will rollback,
    but there are several exception - for example multiple target tables in mapping without corelated commit, or error in post-mapping - you must carefully analyze results of error).
    What will happen if m3 fails?Process is suspended and you can restart execution from m3.
    By having without failover and with max.number of errors=0, you achieve re-cycle failed rows to zero (0).This settings guarantee existence only two return result of mapping - SUCCSES or ERROR.
    What is the impact, if we have large volume of data?In my opinion for large volume Set based mode is the prefered processing mode of data processing.
    With this mode you have full range enterprise features of Oracle database - parallel query, parallel DML, nologging, etc.
    Oleg

  • What is the Best Approach for System Defined Fields and Default values

    Hi ,
    Please let me know that what can be the best approach for providing a Default value for the System defined fields when creating a User and How can we hide the System defined fields at the time of User creation

    You cannot provide default values for any attributes defined in the FormMetaData.xml file. You can only provide default values for fields defined in the User Defined Fields and supply a default value.
    You can using entity adapters to populate some of the values, but you must supply an Organization because there is an entity adapter that you cannot modify that verifies the organization name.
    -Kevin

  • What is the best approach for combining events?

    When I work on a wedding my current workflow involves creating a compound clip for each section of the video (e.g. reception, ceremony, dancing etc). Then I add the compound clip 'sequences' into a single project to add the chapter markers and export to a single master file.
    I like the idea of managing each section in a project rather than a compound clip now that projects are part of the library in 10.1, but is there a good way to combine multiple projects (for each section) into a single master project, or would I still need to copy the contents of each project and paste in the master project?
    Maybe I am best to continue with my current workflow.

    Just saw the discussion title - should have said "What is the best approach for combining projects"?

  • What is the best approach for Continuously reading all DI lines of all the ports of a DIO device?

    Hi! I am new to Labview ..... I want to monitor all the DI lines of all the ports of a device .... What should be my approach?

    same as this
    http://forums.ni.com/t5/LabVIEW/What-is-the-best-approach-for-Continuously-reading-all-DI-lines/td-p...
    Tim
    Johnson Controls
    Holland Michigan

  • What's Best Approach for Multitrack Classical Music?

    Can someone suggest the best approach for recording classical musicians onto
    four tracks? In this scenario, they play until they make a mistake on, say,
    measure 24, stop, then (take 2) go back to measure 20 and play until the next
    rough spot, and so on. Ultimately there may be 15 takes that all need to be
    trimmed and stitched together.
    In the old (tape) days, this was pretty basic editing. I would use a blade and block
    to cut out all the bad stuff on the multitrack tape, then I could mix. But how do I
    do this in Audition? (I use version 1.5.)
    I can't do the cuts it in edit view because the tracks would get out of sync
    Assuming all the takes are in one session, in multitrack view, this most basic of
    functions seems to elude me. What am I missing?

    Al the Drifter wrote:
    If you follow Steve's advice, and after doing the edits you discover
    that one instrument should come up 1db, you are screwed.
    I could be wrong about this in the classical music environment,
    where things are not close-mic'ed but if I am, I am confident Steve
    will correct me.  Ha.
    You always run the risk of small changes between takes - and that's where Audition 3 and the new improved crossfades score rather heavily. You won't notice 1dB on a single instrument across a fade though - it's hard to spot this as a jump, even, unless it's on pure tone. No, I very rarely close-mic stuff at all, although I did with a clavichord recently - it's seriously too quiet to mic any other way.
    jaypea500 wrote:
     when recording classical music, any engineer worth anything has the mix down pat as it's being recorded. 
    That's the way they used to work, certainly - but not nowadays, especially if it's done on location, which most classical recording is. What's more likely to happen is that you'd use decent mic preamps feeding straight into a multitrack, or even some software on a laptop. I generally record like that - but I also feed the multitrack outputs to a Yamaha mixer via ADAT, do a mix on that and record it back to a spare multitrack pair. I don't actually need to do that - but having a mix available from the multitrack that's pretty much there is good as far as being able to play back takes to conductors is concerned.
    Of course, one of the other reasons that classical sessions recorded on location aren't mixed on the spot is that the monitoring conditions are invariably far from ideal, and I'd have it that no engineer worth anything would ever risk a final mix done on location.
    But I only get paid to do all of this on a regular basis, so what would I know? Must be something though - my customers come back for more...

  • Best approach for publishing a paid version and an ad supported free version of the same app

    Hi,
    One of my Windows 8 store app is almost ready for store submission.
    What is the best approach for publishing a paid version and  an ad supported  free version of the same app.
    Can I do the following
    1. Submit the app with unlimited free trial to store
    2. During the free trial ads will be displayed
    3. If the user purchases the app, then the ad would not displayed
    Any advise is greatly
    appreciated.
    Best Regards

    Although the in-App purchase option is good but for ad based apps my approach is different.
    I would suggest putting 2 different apps in the store, one free with Ads and one without. Reason being you want the extra reference and xaml ad controls depending upon how
    many you have on the paid version of the apps. I would keep my apps as lighter and cleaner as possible specially when its a paid app.
    I currently manage both free and paid app through one solution and reuse most of the code except for the views.
    Binoj Daniel www.CodeRewind.com

  • HT204053 Is it possible to have two (or more) different icloud mail accounts (not alias) under the same apple id? If not what is you best advice for all family members to have their own e-mail and still share the purchases under the same apple id. Thanks

    Is it possible to have two (or more) different icloud mail accounts (not alias) under the same apple id? If not what is you best advice for all family members to have their own e-mail and still share the purchases under the same apple id. Thanks

    mannyace wrote:
    Thanks for the response.
    So I basically won't run into any trouble? I
    There should be no issues. Its designed to work like that.  You don't change Apple IDs just because you get a new device.
    mannyace wrote:
    Thanks for the response.
    Is there any chance that the phones can fall out of sync?
    Unlikely. But nothing is impossible.   Though I don;t see how that would happen. As long as both are signed into the Same Apple ID / iCloud Account they will be N'Sync. (Bad Joke)
    mannyace wrote:
    Thanks for the response.
    If I get a message or buy an app or take a photo on the iPhone 5, how do I get those things onto the iPhone 6?
    If you buy an App, you have 2 ways to get it to the iPhone6: If Automatic Downloads is enabled in Settings->iTunes & App Store, it will automatically download to the iPhone 6 when you buy it on the 5 and vice versa if you buy it on the 6, it will download to the 5.
    Alternatively, you can simply go to the App Store App->Updates->Purchased and look for the App there and download it. Purchased Apps will not require payment again. i.e They'll be free to download to the iPhone 6 once purchased.
    SMS Messages will sync over using Continuity as long as they are on the same Wifi network. Otherwise, restoring the iPhone 5 backup to the iPhone 6 will transfer all messages received up until the backup was made onto the iPhone 6.
    Images, can be transferred either through Photo Stream
    My Photo Stream FAQ - Apple Support
    Or any Cloud service you want such as Dropbox, or One Drive.
    mannyace wrote:
    Also, something i forgot to ask initially: Should I update the iPhone 5 to iOS 8 first or does that not matter?
    If you want the Continuity features as explained above you need to update the iPhone 5 to iOS 8. Otherwise its not all that important.

  • What is the best way to 'clean up" a Mac that has been going for about 2 years.  I reset safari frequently but need to be sure stuff I don't want is gone.

    What is the best way to 'clean up" a Mac that has been going for about 2 years.  I reset safari frequently but need to be sure stuff I don't want is gone.

    I'd gather by your "reset Safari"  and "clean up" you mean by sites you rather not have your mom see.
    Hidden Flash cookies are stored in "Macromedia" Folders on your computer, can delete using the free Easy Find first, but need to reinstall Flash again here
    http://www.macupdate.com/app/mac/11076/easyfind
    http://get.adobe.com/flashplayer/
    OnyX run All the cleaning and maintenance steps followed by a reboot, followed by a Disk Utility erase free space.
    http://www.titanium.free.fr/
    CCleaner is in beta for OS X, can combine the cleaning and secure erase in the same steps if properly configured.
    http://www.piriform.com/mac/ccleaner
    Every web site knows your apx location.
    http://www.whatsmyip.org/more/
    To be sure to have a clean machine, a
    Restoring OS X - 10.6  "fresh install method"
    Restoring OS X - 10.7 - wipe and install
    is the only way as you only bring files back to the machine that you know what they are, everything else is removed.
    https://discussions.apple.com/message/16276201#16276201

  • What cables are best when connecting apple tv, my HD tv has 2 HDMI slots but they are both in use, one for Sky and one for cinema. There are no hdmi slots spare on the cinema either ...

    what cables are best when connecting apple tv, my HD tv has 2 HDMI slots but they are both in use, one for Sky and one for cinema. There are no hdmi slots spare on the cinema either ...

    Mine has four  Seriously shauntana the splitter is easy, a simple click to changre feed and eventually you will damage the HDMI port or cable by taking it in and out.  True you can only use one feed at a time nut you can only use one port on the telly at one time too.  I used it on my old one port telly for PS3 and Sky and it worked a treat.
    Enjoy
    Jules

  • Which one is the best approach for responsive UI development option in SharePoint 2013

    Which one is the best approach for responsive UI development option in SharePoint 2013
    Device channel or responsive UI (HTML, CSS)?

    In practice you're probably going to end up with a combination. A couple of device channels for classes of device and then responsive UI within those channels to adjust to particular devices within the classes.
    Of course the real answer is as always 'it depends' as you'll need to pick the best option for each client based on their needs.

  • Best approach for IDOC - JDBC scenario

    Hi,
    In my scenarion I am creating sales order(ORDERS04) in R/3 system and which need to be replicated in a SQL Server system. I am sending the order to XI as an IDoc and want to use JDBC for sending data to SQL Server. I need to insert data in two tables(header & details). Is it possible without BPM?  Or what is the best approach for this?
    Thanks,
    Sri.

    Yes, this is possible without the BPM.
    Just create the Corresponding Datatype for the insertion.
    if the records to be inserted are different, then there wil be 2 different datatypes ( one for header and one for detail).
    Do a mutlimapping, where your Source is mapped into the header and details datatype and then send using the JDBC sender adapter.
    For the strucutre of your Datatype for insertion , just check this link,
    http://help.sap.com/saphelp_nw04/helpdata/en/7e/5df96381ec72468a00815dd80f8b63/content.htm
    To access any Database from XI, you will have to install the corresponding Driver on your XI server.
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/3867a582-0401-0010-6cbf-9644e49f1a10
    Regards,
    Bhavesh

  • Best approach for RFC call from Adapter module

    What is the best approach for making a RFC call from a <b>reciever</b> file adapter module?
    1. JCo
    2. Is it possible to make use of MappingLookupAPI classes to achieve this or those run in the mapping runtime environment only?
    3. Any other way?
    Has anybody ever tried this? Any pointers????
    Regards,
    Amol

    Hi ,
    The JCo lookup is internally the same as the Jco call. the only difference being you are not hardcoding the system related data in the code. So its easier to maintain during transportation.
    Also the JCO lookup code is more readable.
    Regards
    Vijaya

Maybe you are looking for