What is the best way to run AirPort Extreme and Airport Time Capsule together?

I have cable DSL, and I was running an AirPort Extreme. DH was sold a time capsule, so I just daisy-chained off the airport. We had an issue with limited reach, so I tried to reconfigure. Now I have no wifi at all. Tried everything I can think of. What is the best way to handle these two products, or should one be left out? Any suggestions would be great.

Decide which one you would like to serve as your router, and configure the other one as a bridge. If they are both the most recent models of each neither one is particularly advantageous over the other.
Connect them to each other with an Ethernet cable if you want to create a "roaming network", or not, if you want to create a "wirelessly extended" network. A roaming network is the better of those two choices.
"Hard reset" the one connected to the modem and use AirPort Utility to configure it. Verify everything works to your satisfaction, then "hard reset" the other and configure it.
To "hard reset" an AirPort Base Station: make sure it's powered up, then press and hold its tiny reset button and keep it depressed for five to ten seconds, long enough for its LED to flash amber rapidly. Release the reset button. Then, the LED will glow amber steadily for about a minute. Then, it will flash amber, slowly, about once every second or two, waiting for you to configure it with AirPort Utility.

Similar Messages

  • What is the best way to run Sage on a MacBook Pro?

    What is the best way to run Sage on a MacBook Pro?  I am a first time Apple user.

    There's a lot of Sage out thete so fill us in with information. If it runs on Windows then you'll need to create a partition on your mbp using boot camp and install Windows. So what is Sage for you?

  • What is the best way to run windows on my Mac? And What are the pitfalls I should watch for?

    What is the best way to run windows on my Mac?   What are the pitfalls/

    If you need Windows as your main operating system you would be better off buying a Real Windows PC.
    Running windows on a Mac is always a compromise. Whether in a Boot Camp partition or in a Virtual Machine.
    In boot camp you can't easily Re-Partition and or Re-Size the drive it is installed on. You can't use both graphics cards as Apple has limited Windows to use the discrete graphics only, that is if your mac has 2 graphics cards (15" MBPs), which will shorten the battery run time in Windows.
    The trackpad only has limited functions in Windows, less then is available on the Mac side and a real Windows PC.

  • What's the best way to run Logic Pro from external hard drive.

    What's the best way to run logic from external hard drive

    Hi
    Organism wrote:
    Logic is designed to run from your Applications folder. I suspect if Logic was moved to an external drive, it might not be able to locate its assets, like loops and libraries.
    As long the necessary files are in the correct places on the boot disc, you can run the Logic application itself fom wherever you like. It would not be recommended however, and there would be very little benefit (if any) in doing so.
    CCT

  • What is the best way to run .exe files on my mac?

    What is the best way to run .exe files on my mac? I need to run some updates for my john deere gps and the downloads i get can only be run on windows.

    There are several options for running Windows software (*.exe files) on a Mac, depending what your program is, how often you use it, and your personal preferences.
    One way that does not require Windows is an open source effort called WINE.  Check out winehq.org.  You may find that that's all you need for your programs.  There is also a commercial effort that has grown from WINE, and you will find info about it on the site mentioned.  These DO NOT require that you have and install Windows.
    If you want to run sessions devoted only to Windows software, and want programs to run as fast as they do on a PC, the Apple's Bootcamp program is useful.  With it you dedicate a partition on your hard disk to windows, and on startup choose to either boot into OS X or Windows.  Each runs without any connection to the other.  This requires you have a copy of the Windows software as well as the applications you want to run. 
    If you want to be able to easily exchange data between your Windows and Mac programs, and skip back and forth between the two, there are several emulators available that run on Mac OS X and create a Windows environment where many Windows programs can operate along side Mac programs.  Parallels and VMwear are two comercial packages available for purchase and Virtual Box is an open source effort available for free.  Google will find all three for you.
    My only experience is with Virtual Box.  It is slow and a bit clunky, but it is free and meets my needs for the very few "just got to have" windows programs I sometimes use.
    Google is your friend on this and can provide a lot more, and better, information than I can.
    Best of luck,
    Ray

  • What is the best way to run windows on my mac?

    What is the best way to run windows on my mac?
    I have a particular program that i need to run, and it only runs on windows. I have a macbook pro

    As Templeton noted, it depends and will at least be somewhat subjective. 
    There are basically three options out there.  You can use a Windows emulator (Wine or the commercial version of it, Crossover Office), use Boot Camp to "dual boot" or use virtualization software (Parallels, VMWare Fusion, or VirtualBox).  Each has its advantages or disadvantages.
    The Windows emulators have the advantage of being the one option that doesn't need the purchase of a copy of Windows.  Unlike Boot Camp, but like the virtualization options, this allows you to run Windows programs and OSX programs side by side.  The big problem, though, is that it is the least compatible option--a lot of Windows software either has "issues" or will not function at all.  The Crossover website has information on which programs are known to work and how well they are known to work. 
    Boot Camp is the option that Apple ships OSX with.  You'll need a copy of Windows to install into the partition.  You'll effectively divide your disk into two parts and have two machines.  The major advantages are, first, you don't need to acquire separate software *AND* the Windows license.  As well, it's the highest performance Windows system.  What you have is truly a Windows machine.  That's both the good and the bad--you aren't going to be able to use OSX software at the same time, and you have to reboot to get back to OSX.  I've always thought it was best for someone who likes the Apple hardware and wants to use it for a Windows box--in that case Boot Camp is clearly a great solution.
    Finally there's virtualization which seems to be the most popular way to handle Windows, especially if you need to run one vertical market package.  It has the advantage of allowing you to use your OSX software at the same time, and the virtualization gives an extremely high level of compatibility.  About the only thing that won't run is a virtualization package (and there's not a lot of reason to run that in a Windows VM).  There is a performance hit compared to Boot Camp, but it's minimal for all but the most demanding applications (that being high end games). 
    It will chew up RAM on the OSX machine, but if you have at least 4 GB of RAM it will probably be manageable, especially if you only need to run one Windows program.
    You will need both a virtualization program (there are three major ones) and purchase Windows.  Two of three programs are commercial packages (Parallels and VMWare Fusion), while the other is an open source option (VirtualBox).  Virtual Box has the advantage of being free, but it's by far the least polished of the group.
    Which way is best?  As was noted, it depends.  I run VMWare Fusion on my machines, and I have used CrossOver Office for limited purposes.  I've not yet seen, in my use pattern, a reason to go to Boot Camp but I certainly can see cases where it might make sense.

  • What is the best way to safeguard my files and pictures before I send off my MacBook Pro to get fixed?

    What is the best way to safeguard my files and pictures before I send off my MacBook Pro to get fixed? I am running Mavericks and use an AirPort Time Machine to back-up all my files.

    Back up all data on the internal drive(s) before you hand over your computer to anyone. You need at least two independent backups to be completely safe. There are ways to back up a computer that isn't fully functional—ask if you need guidance.
    If privacy is a concern, erase the data partition(s) with the option to write zeros* (do this only if you know how to restore to an empty drive.) Don’t erase the recovery partition, if present.
    Keeping your confidential data secure during hardware repair
    Apple also recommends that you deauthorize a device in the iTunes Store before having it serviced.
    *An SSD doesn't need to be zeroed.

  • What is the best way to back up iPhoto and create disc space

    what is the best way to back up iPhoto and then remove the iphoto folder from the mac book and onto the external apple time capsule

    Two different questions
    the best qway to backup is to use TimeMachine or other automatic backjup program
    However this does not allow you to reduce space since a backup need to be a copy of your existing library and as soond as you changge the library you no longer have a backup and sooner or later the photos will be gone form the bakcujp too
    You need to run the iPhoto library on an external drive or had a complete library on and external drive and a smaller library on yoru internal drive using iPhoto Library Manager - http://www.fatcatsoftware.com/iplm/ -  to move photos between the two libraries
    Moving the iPhoto library is safe and simple - quit iPhoto and drag the iPhoto library intact as a single entity to the external drive - depress the option key and launch iPhoto using the "select library" option to point to the new location on the external drive - fully test it and then trash the old library on the internal drive (test one more time prior to emptying the trash)
    And be sure that the External drive is formatted Mac OS extended (journaled) (iPhoto does not work with drives with other formats) and that it is always available prior to launching iPhoto
    And backup soon and often - having your iPhoto library on an external drive is not a backup and if you are using Time Machine you need to check and be sure that TM is backing up your external drive
    LN

  • We have always used one iTunes account and I want to crate a new account for my daughter.  What is the best way to go about this and will she need to download free apps again?

    We have always used one iTunes account and I want to crate a new account for my daughter.  What is the best way to go about this and will she need to download free apps again?

    Not going to happen the way you want it to.
    When you add a gift card balance to the Apple ID, it's available for the Apple ID.
    Probably best to create unique Apple ID's for each... this will also make things easier in the future as purchases are eternally tied to the Apple ID they were purchased with.

  • What is the best way to transfer my music and pictures from my old PC to my new Macbook Pro?

    What is the best way to transfer my music and pictures from my old PC to my new Macbook Pro?

    This may help;
    http://www.apple.com/support/macbasics/migration/
    Ciao.

  • What is the best way of deploying a jsp and bc4j aplication

    Hi
    I would like to know what is the best way of deploying a jsp and
    bc4j aplication in ias 9i.
    thanks in advanced
    rjc

    In the page I simply referenced the facescontext directly... no need for a custom servlet.
    public void createcookie() {
    FacesContext fc = FacesContext.getCurrentInstance();
    HttpServletResponse resp = (HttpServletResponse)fc.getExternalContext().getResponse();
    Cookie userCookie = new Cookie("cookiename", "cookievalue");
    userCookie.setMaxAge(-1);
    userCookie.setMaxAge(3600);
    resp.addCookie(userCookie);
    return null;
    public String readcookie() {
    FacesContext fc = FacesContext.getCurrentInstance();
    ExternalContext ec = fc.getExternalContext();
    Map cookiemap = ec.getRequestCookieMap();
    if (cookiemap != null) {
    Cookie cookie = (Cookie) cookiemap.get("cookievalue");
    return cookievalue;
    For reference I could not get getCookies() method of HttpServletRequest to work.. it would only return JSESSIONID.

  • What is the best way to back up photos and videos to a dvd from iPhoto, not in iPhoto format but just in jpeg format to access on either windows or mac

    what is the best way to back up photos and videos to a dvd from iPhoto, not in iPhoto format but just in jpeg format to access on either windows or mac

    When you export the videos out of iPhoto be sure to select Kind = Original.  Otherwise you'll just get an image file of the first frame of the video.
    OT

  • What is the best way to create E-Flyers and insert to Microsoft Outlook??

    What is the best way to create E-Flyers and insert to Microsoft Outlook??

    http://kb.mailchimp.com/article/how-to-code-html-emails
    Once created, the HTML document cab be placed in the Stationery folder.
    On a PC it's here.
    "C:\Program Files\Common Files\Microsoft Shared\Stationery"

  • What is the best way to reformat a mini and reinstall Mavericks

    What is the best way to reformat a mini and reinstall Mavericks?

    Hi ruthefrombenson!
    This article can help you erase your hard drive and reinstall Mavericks:
    OS X Mavericks: Erase and reinstall OS X
    http://support.apple.com/kb/PH14243
    Thanks for being a part of the Apple Support Communities!
    Regards,
    Braden

  • What is the best way to manage 5 users and 6 devices? We dont all want the same merged contacts, we dont all want the same calendar notes, music, pics etc etc.

    What is the best way to manage 5 users and 6 devices? We dont all want the same merged contacts, we dont all want the same calendar notes, music, pics etc etc.

    As long as it is pointed to iTunes it will be accessible via home sharing on Apple TV.
    http://support.apple.com/kb/HT1751?viewlocale=en_US&locale=en_US
    If these are commercial DVD's we can't comment on any conversion process.

  • What is the best way to captue current date and time?

    I got a field in table to capute current date and time...i am
    using SQL Server.
    field name datatype length
    enter_datetime datetime 8
    What is the best way to get current date and time and insert
    to table?.
    Is this way?.
    <cfset curtime = 'dateformat(#now()#,'mm/dd/yyyy')&"
    "&timeformat(#now()#,'hh:mm:ss')'>
    This way looks like time is not entered correctly.
    or any other better way?.

    > get current date and time and insert to table?
    You can use cfqueryparam
    <cfqueryparam value="#now()#"
    cfsqltype="cf_sql_timestamp">
    Or as was suggested, set the default for your table column to
    getdate(). Then you won't have to insert anything. Sql server will
    do it automatically when a new record is created.

Maybe you are looking for