What is the content of oracle  success kit?

Please I need to know all the thIngs that are contained in the oracle success kit. My OCA certificate arrived my post office box in nigeria today. When I went to pick it up I discovered that it had been opened by mail agents. In order to be sure nothing was taken from the envelop, I would be grateful if anyone can tell me all the things that are supposed to be there.
Thank you.

962545 wrote:
Please I need to know all the thIngs that are contained in the oracle success kit. My OCA certificate arrived my post office box in nigeria today. When I went to pick it up I discovered that it had been opened by mail agents. In order to be sure nothing was taken from the envelop, I would be grateful if anyone can tell me all the things that are supposed to be there.
Thank you.Just to confirm the major OCA success kit does not contain a plastic credit side card like OCP does ( or at least used to do).
Essentially the key document is the certificate. There is also a letter, which perhaps is secondary.
Congratulations on passing.

Similar Messages

  • Unable to full text index the contents in Oracle 11g UCM

    Hi,
    I am new to the Oracle UCM 11g.
    i am unable to full text index the content files that are check-in into the Oracle UCM.
    I have added the below entries in config.cfg file:
    SearchIndexerEngineName=OracleTextSearch
    IndexerDatabaseProviderName= SystemDatabase
    AdditionalEscapeChars=-;#
    While performing the indexing operation using Repository Manager only, metadata of the content files are indexed, but full text is not getting indexed.
    What is missing here in Oracle UCM for not fulltext indexing the contents? What configurations do i need to do for this so that i can search perform the full text search on the Contents in Oracle UCM?
    Thanks in Advance
    Dipesh

    Hi Srinath,
    Collection rebuild cycle runs perfectly fine. After enabling tracing for Indexer and systemdatabse, i got the below info in the log:
    "Finished rebuilding the search index with a total of 123 files successfully indexed. A total of 0 files had a full text index."
    The below is the details of the activeindex.hda:
    <?hda version="11gR1-11.1.1.3.0-idcprod1-100505T121221" jcharset=UTF8 encoding=utf-8?>
    @Properties LocalData
    UseImplicitZonedSecurityField=true
    blFieldTypes=
    ActiveIndex=index1
    blDateFormat=M/d{yy}{ h:mm[:ss]{ a}}!mAM,PM!tGMT+05:30
    @end
    @ResultSet SearchCollections
    7
    sCollectionID
    sDescription
    sVerityLocale
    sProfile
    sLocation
    sFlag
    sUrlScript
    TestHost
    !csSearchDefaultSearchCollection
    English-US
    local
    index1
    enabled
    <$URL$>
    @end
    Is it possible that OracleTestSearch Component is missing in Oracle UCM?
    Thanks
    Dipesh

  • What is the content Tab

    Hi All,
    We have just started using OBIEE as a business intelligence solution and I am in a process of creating RPD for our current data model. However, as I have gone through the official oracle documentation and various posts but I am still not sure what is the CONTENT tab of an LTS signifies logically?
    Can anyone please elaborate upon this with a small example or direct me to a more precise documentation with an example?
    I will be highly thankful.
    Thanks,
    Ronny

    Thanks but it's not mandatory
    and give only those who
    want.
    If it was possible for me, I will give you a little
    bit of point because I'm now sure that you
    can't use the tab content of an lts for a level based
    measure ;-)
    good evening and go Netherlands !

  • What are the minimum requirements to successfully Synchronize a SharePoint 2010 Calendar or Task List with Outlook 2010?

    What are the minimum requirements to successfully Synchronize a SharePoint 2010 Calendar or Task List with Outlook 2010?
    SharePoint permission levels required for the user profile?
    Does the user need top level permissions on the SharePoint site?
    What other minimum requirements must be met for Outlook 2010 to synchronize successfully with SharePoint 2010?
    TheDrape

    Hi,
    To synchronize these libraries and lists, you must have Outlook 2010 installed on your client computer and you must have Collaborate permission to the library or list.
    You don’t need any permissions for the user profile.
    I provide you a link about synchronizing SharePoint 2010 content with Outlook 2010 for your reference:
    http://office.microsoft.com/en-us/sharepoint-foundation-help/synchronize-sharepoint-2010-content-with-outlook-2010-HA101881295.aspx
    Thanks,
    Rock Wang
    Rock Wang TechNet Community Support

  • What is the password for 'oracle' user created during XE installation?

    Hi,
    What is the password for 'oracle' user automatically created when XE is installed?
    I installed XE on Linux and it's created under 'oracle' user, but I don't know 'oracle' password. So, I cannot stop TNS listener.
    During configuration, it prompted me to enter SYS and SYSADMIN password but it didn't ask me to enter 'oracle' user password.
    Please let me know or point me to the document.
    Thanks,
    N

    Hi Jari,
    I tried your suggestion, but it didn't work unfortunately.
    When I type (sudo su -oracle) as follows, it still prompts the password. When I hit Enter key w/o anything, it seems to proceed and the prompt shows up in the following line. So, I thought it was successful, but when I checked 'whoami', it's not logged in as 'oracle'.
    So, I created the password for 'oracle' and logged in as 'oracle' using a new password. Then, I stopped TNS listener to uninstall XE.
    It would be nice if it's documented in XE document somewhere... since it's created by XE installation, I assumed some kind of default password was used.
    Thanks,
    N

  • What is the Diffrence between Oracle 11 and 11i

    What is the Diffrence between Oracle 11 and Oracle11i ?.
    With Rgds
    Arun J.Isaac

    Oracle 11i is internet based and run with java platform where we can see the applets downloading alongwith oracle forms and it refreshes all the jar files in oracle default directory.
    Oracle 11 is not intergrated with Java its an Oracle standalone platform.
    Regards,
    Arumugam S.

  • What r the content conversion parameters

    Hi All
    This link contains the text file.
    http://www.census.gov/foreign-trade/d/dist.txt
    what are the content conversion parameters are required to convert that text to xml.

    Make it simple  recordset structure as below ...
    Details
            ----------->District code
            ----------->Port code
            -----------> Name
    Recordset structure   Details, *
    Details.fieldSeparator  :
    Details.endSeparator  'nl'
    Details.fieldNames :  District code, Port code, Name

  • What are the content conversion parameters

    Hi All
    This link contains the text file.
    http://www.census.gov/foreign-trade/schedules/d/dist.txt
    what are the content conversion parameters are required to convert that text to xml.

    <sen_dt>
         <prefix>
              <heads>
                   <dc>               
                   <pc>
                   <name>
              <main>
                   <dcno>
                   <pcno>
                   <name1>
    <rec_dt>
         <prefix>
              <District_code>             District code      optional
              <port_code>              port code          1
              <name>                   name              
         <main>
              <District_code_no>
              <port_code_no>
              <name1>
    content conversion
         document name:<sen_dt>
         document namespace:http::----
         document offset:--
         recordset name:input
         recordset structure:heads,1,main,*
         recordset sequence:Ascending
         recordset per message:----
         keyfield name:---
    prefix.fieldfixedlengths:---
    prefix.endSeparator:---
    prefix.fieldNames;---
    prefix.keyFieldvalue:--
    prefix.keyFieldlnStructure:---
    main.fieldFixedLengths:9,
    main.fieldSeparator:|
    main.endSeparator:'nl'
    main.fieldNames:district code,port code,name
    main.keyFieldValue:
    main.keyFieldlnStructure:

  • What are the content conversion parameters for this structure

    Hi All,
    The below file is the text file. what are the content conversion parameters are required and what is the structure to create in the IR to convert into xml.
    Schedule D - District/Port List (by District Code) [Produced13APR11]
    District |    Port      |    Name
    Code     |    Code      |
    01       |              |    PORTLAND, ME
             |    0101      |    PORTLAND, ME
             |    0102      |    BANGOR, ME
             |    0103      |    EASTPORT, ME
             |    0104      |    JACKMAN, ME
             |    0105      |    VANCEBORO, ME
             |    0106      |    HOULTON, ME
             |    0107      |    FORT FAIRFIELD, ME
             |    0108      |    VAN BUREN, ME
             |    0109      |    MADAWASKA, ME
             |    0110      |    FORT KENT, ME
             |    0111      |    BATH, ME
             |    0112      |    BAR HARBOR, ME
             |    0115      |    CALAIS, ME
             |    0118      |    LIMESTONE, ME
             |    0121      |    ROCKLAND, ME
             |    0122      |    JONESPORT, ME
             |    0127      |    BRIDGEWATER, ME
             |    0131      |    PORTSMOUTH, NH
             |    0132      |    BELFAST, ME
             |    0152      |    SEARSPORT, ME
             |    0181      |    LEBANON AIRPORT
             |    0182      |    MANCHESTER USER FEE AIRPORT, NH
    02       |              |    ST. ALBANS, VT
             |    0201      |    ST. ALBANS, VT
             |    0203      |    RICHFORD, VT
             |    0206      |    BEECHER FALLS, VT
             |    0207      |    BURLINGTON, VT
             |    0209      |    DERBY LINE, VT
             |    0211      |    NORTON, VT
             |    0212      |    HIGHGATE SPRINGS/ALBURG

    since in this case you dont seem to have a key value to figure out what your header is, it is better to go for a two level mapping. i.e first read all the data - each line as an xml tag. and in the first mapping group it as required and then use it for your original mapping.
    Regards,
    Ninu

  • Everytime I use IE, first I have to click on the IE bar to allow blocked contect to display. What is the content that is being blocked from IE? viewers may not know what the problem is and see my site totally out of format.

    Everytime I use IE, first I have to click on the IE bar to allow blocked contect to display. What is the content that is being blocked from IE? viewers may not know what the problem is and see my site totally out of format.

    discoveriweb wrote:
    This is iweb development where after publishing, things look different in IE than other browsers. U r correct that this is due to IE software but is iWeb related. After all, one uses iweb not to just publish in Safari but for all browsers.
    Which means that you are only considering half of the problem, but that's your choice.
    I'm out.

  • HT201402 What is the Content "other" category in the "about this mac" Storage information?

    I have 250 Gig MacBook Pro.  My Audio is 21G, Movie 33G Photo 13G, App 17G Backup 0G, Other 124G.  What is the content of "Other"

    Hi,
    Can anyone help me with this: (see attached picture)
    I suppose there is a (preference) file to reset in order to display correctly the storage information ?
    Thank you for your help.
    Stan.

  • HT2404 what is the content code

    what is the content code

    Mountain Lion?
    The code you recive from Apple to upgrade your system software to Mountain Lion.
    https://uptodate.apple.com/UtdPrepareAction?program=Mountain%20Lion&locale=en_us

  • What is the "Content" DVD used for in CS5 Master Collection?

    Hey Everybody,
    Sorry--I know there must be some cue I am over looking somewhere, but what is the Contents DVD fo in the 4 disk CS5 Master Collection Installation Pack?  I have installed everything on a new MacBook Pro.  First 3 DVDs are very logical (in terms of what they contain and how to install them), but the 4th one just has a bunch or read-me files in various languages.  Is there something on this disk I need to install?
    Many thanks in advance!

    Just some templates and other assorted stuff. Nothing you have to have.
    Bob

  • What is the difference btw Oracle bpm 10gr3 vs albpm 6.0.5 version

    What is the difference btw Oracle bpm 10gr3 vs albpm 6.0.5 version
    Are the build number common to them?

    Projects built in ALBPM 6.0 can be used directly in Oracle BPM 10g, but the reverse is not true.
    It's sometimes thought that Oracle BPM 10g was just a relabeling of the predecessor BEA product ALBPM. This is not the case.
    In Studio, standards are better supported:
    <li> By default, new processes now use horizontal swim-lanes. You can change the swim-lanes orientation individually for each process. You can define the default orientation for each project and for your Studio installation.
    <li> It uses more sophisticated BPMN icons. BPMN is the new default process diagram theme. BPMN constructs now include Gateways (AND, OR (new in 10g), XOR, Multiple Instance (previously Split-N)). A new Timer event was added. Loop conditions for automatic activities and groups were added.
    <li> Studio now supports Mac/OS 10.4 Tiger and Mac/OS 10.5 Leopard.
    <li> Studio now supports Windows Vista.
    <li> Studio now supports CVS and Subversion version control systems.
    <li> The Studio UI incorporates Eclipse 3.3 improvements such as the following:
    <li> New Minimize/Maximize behavior: When minizing view stacks in Studio, the view icons are placed on the nearest trim area. If a view is maximized, all other views are minimized, rather than hidden.
    <li> Interactive tasks provide a new "previewable" property. The new Application Display Panel and Task Execution Panel of WorkSpace automatically start the execution of previewable tasks without locking the process instance. Enabled by default for Dashboards.
    <li> New type of Activity: Time Activity. A process instance that arrives to this activity just sits idle until a timed event occurs.
    <li> Option Process Notification Immediately on Termination Wait activities has been deprecated. Now both the Wait activity and the first activity in the interruption flow always execute in the same transaction.
    <li> Although I'm not wild about it, there is an auto-layout feature re-arranges all visual elements of a process diagram automatically, minimizing superpositions and aligning the flow as much as possible. Only available for processes with horizontal lane orientation.
    <li> New process property (Greedy Execution Mode) indicates the Process Execution Engine to collapse contiguous automatic tasks in a single transaction. This mode of execution provides better performance for some processes. Disabled by default.
    <li> A new Process-Level debugger allows developers to introduce breakpoints and debug complete processes running in Studio. When the execution reaches a breakpoint, the Engine pauses and Studio's debugging view appears. You can inspect variables, add new breakpoints, resume and continue execution.
    User Interface
    <li> The Business Analyst and Business Architect profiles provide a simpler set of menu options and toolbars.
    <li> New editor for BPM Object Presentations. It's easier to use, provides a WYSIWYG drag and drop interface, improved CSS support and a new Drag & Drop toolbar.
    <li> You can now interrupt a running Simulation started with the Run to the End button.
    <li> New BETWEEN operator added to Business Rules editor (on both Studio and WorkSpace). This operator works with Time and numeric types.
    <li> The Documentation View now displays read-only documentation for the standard Fuego.* components.
    <li> New on-line help book Oracle BPM Components Reference provides reference documentation for the standard Fuego.* components. Only available for the developer profile.
    <li> This version introduces Project Dependency, which allows you to re-use components and role definitions from a common base project.
    In the WorkSpace:
    <li> WorkSpace has an edit mode which allows users to change and save the configuration and layout of panels.
    <li> A new tabbed interface allows you to define multiple pages, each with its own set of panels. You can export the layout configuration to an XML file and re-import it on a different environment or as a different user. Administrators can define layouts for all users in a certain Role.
    <li> You can export the data in the Worklist panel to a PDF or CSV
    <li> You can see an OOTB chart representation of the distribution of items in the Worklist panel.
    <li> WorkSpace includes the following new panels: Task Panel: Renders the execution of interactive tasks within the panel, instead of using the default modal dialogs. Dashboard Display Panel: Provides a way to display Dashboards within a Panel. View Chart Panel: Provides predefined graphical reports about process performance, work items distributions and workload. Application Panel: This panel contains an application (the execution of a Global Interactive). Applications can respond to work item selections or run independently.
    <li> The user can now do re-assignment operations on multiple instances at once.
    <li> The Business Rules editor shows additional auditing information, including who and when a rule was modified.
    <li> WorkSpace now (optionally) stores session-specific information as client-side cookies. This allows load-balancing on a cluster environment without affecting the user experience.
    Integration:
    <li> New timeout property added to external resources of type HTTP Server. Use this setting to control timeouts on web service invocations.
    <li> Authentication information added to external resources of type JMS (Java Messaging System)
    <li> Processes exposed as Web Services can now provide a runProcess operation, which synchronously executes the complete process (from begin to end). Only meaningful on fully automated processes.
    Enterprise:
    <li> New Ant tasks to rebuild the Oracle BPM web applications for container-security.
    <li> Configuration Wizard adds option Generic JNDI to the list of available LDAP servers. When using this option, you must provide a custom configuration file defining the mapping of object classes, attributes and filters. This new feature is also the new mechanism for integrating with AquaLogic Interaction 6.5, replacing the old Identity Service.
    <li> Configuration Wizard can now be run without user interaction ("silent mode"). You specify all configuration values in an XML file.
    <li> Oracle BPM client applications (including WorkSpace, PAPI-WS and custom PAPI apps) are now able to connect to multiple environments (BPM Directories) simultaneously.
    <li> Added Sybase as a new provider for the Engine database and BPM Directory database.
    <li> More information added for auditing of Business Rules, including who and when a rule was modified.
    <li> Updated bundled JDBC drivers to their latest version.
    <li> The Engine now logs warning messages when it detects rogue threads. A new preference allows the administrator to disable automatic re-starts when the Maximum Number of Rogue Component Executions is reached. In addition, in the case of an automatic re-start the Engine now logs a complete thread dump.
    <li> Simplified procedures for deploying BPM WorkSpace on WebLogic Portal. BPM Process Administrator now generates the WorkSpace EAR file as a WLP library module.
    <li> Authentication information added to external resources of type JMS (Java Messaging System).
    Dan

  • What are the features of Oracle Database Cloning

    What are the features of Oracle Database Cloning

    Do you mean Duplication Database ?
    Please refer to documentation:
    [Creating and Updating Duplicate Databases with RMAN|http://download.oracle.com/docs/cd/B19306_01/backup.102/b14191/rcmdupdb.htm]
    Kamran Agayev A. (10g OCP)
    http://kamranagayev.wordpress.com

Maybe you are looking for