HT4260 I did everything the article suggests. And for my macbook pro it works perfectly. But all the other devices (iphone 5, 4, Macbook Air) can't connect to the network. Anybody any idea's?

I did everything the article suggests. And for my macbook pro it works perfectly. But all the other devices (iphone 5, 4, Macbook Air) can't connect to the network. Anybody any idea's?

Try resetting your modem. Power it down. Wait a moment, then power it up again. While it resets, do not change what is connected to it.
In another, though unrelated article, Apple recommends the following:
If you have configured your Wi-Fi base stations in the past, it may be helpful to do a factory default reset of each Wi-Fi base station that will be part of the wireless extended network before you begin.
This step really ought not be considered optional for the configuration you propose. If the problem persists after resetting your modem, reset everything else too.

Similar Messages

  • HT4437 I have a Macbook Air, an iPad3, and Apple TV.  I want to be able to use the iPad3 for training through the Macbook Air which is connected to a projector.  Any ideas?

    I would like to be able to show my iPad3 screen through the Macbook Air that is connected to a projector.  I attended an Apple Training presentation and the presenter was using this set up-how do I get it set up correctly?  I also recently purchase Apple TV because the presenter said that she was using this device with the Air and the iPad.

    If you are trying to connect the iPad to the Macbook, then try this app: http://www.reflectionapp.com/ The iPad also supports connecting straight to the Apple TV, so you could try it that way too.
          Hope this helps!

  • TS1389 I did everything that apple suggest and it's still doesn't work. What should I do ?

    I just bought the album Dark Eyes by Half Moon Run and I can't listen to half the songs because itunes is telling me that my computer is not authorized to play those songs. When I enter my account name and password it tells me that my computer is already authorized.
    Apple suggest 4 ways to solve that problem. I did ALL of them, step by step, and it's STILL not working.
    Before you ask, YES I have the latest itunes version (10.7.0.21).
    What should I do ?
    Thank you in advance for your answers.

    I can't listen to half the songs because itunes is telling me that my computer is not authorized to play those songs. When I enter my account name and password it tells me that my computer is already authorized.
    If you're only getting that alert for some tracks on the album, that suggests that the tracks are damaged.
    If your country's iTunes Store allows you to redownload purchased tracks, I'd delete your current copies of the dodgy tracks and try redownloading fresh copies. For instructions, see the following document:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store
    Otherwise, I'd report the problem to the iTunes Store.
    Log in to the Store. Click on "Account" in your Quick Links. When you're in your Account information screen, go down to Purchase History and click "See all".
    Find the items that are not playing properly. If you can't see "Report a Problem" next to the items, click the "Report a problem" button. Now click the "Report a Problem" links next to the items.

  • I updated to iOS 7 and now some of my apps won't display in landscape mode and they did before the update. Any ideas on how to fix it?

    I updated to iOS 7 and now some of my apps won't display in landscape mode and they did before the update. Any ideas on how to fix it?

    This could be from having restrictions enabled. Icons completely disappear when "restricted"

  • I have iOS7 on my iPhone4. I turned on the Voice Over option and now my phone is not working at all. At first it was freezing and not accepting any commands. Now all I have is a blank sceen. I can't get back into it. Any ideas what happened here?

    I have iOS7 on my iPhone4. I turned on the Voice Over option and now my phone is not working at all. At first it was freezing and not accepting any commands. Now all I have is a blank sceen. I can't get back into it. Any ideas what happened here?

    Hi Jeffny01,
    If your iPhone is not responding, you may find the following article helpful:
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/TS3281
    Regards,
    - Brenden

  • I get an error when trying to burn a DVD. I have version 7.1.2. "Error rendering/encoding titles...".  Never did burn the DVD.  Any ideas?

    I get an error when trying to burn a DVD. I have version 7.1.2. "Error rendering/encoding titles...".  Never did burn the DVD.  Any ideas?
    Thanks, Scott

    Hi
    This Q is close to - Something is wrong. What's it ?
    You have to supply much more info to be able to start guessing.
    • What material was used ? Video codec, Audio file format and Photo file format
    • Free space on Start-Up hard disk. How much ?
    • Brand of DVD used ?
    • Type of DVD used ?
    • Burn speed set down or not ?
    • Version of iMovie, iDVD'11 v 7.1.2 (OK), QuickTime and Mac OS ( X.6.8 I read ? )
    And all extra info You can supply - that set's us on track.
    Yours wanting to be of help. Bengt W

  • TS1398 When I try to connect to the wifi it will not unlock. It will not even search for a network. I have reset the phone and reset the network. Any ideas.

    When I try to connect to the wifi it will not unlock. It will not even search for a network. I have reset the phone and reset the network. Any ideas.

    I Can do that for home but not at friends and work places, nobody else has any problem joining it!! I'm wondering if restoring factory settings will solve it but don't really want to do that as its a hassle to reinstall everything for it to not solve the problem!!

  • Our airport extreme network works fine with our 6 devices. But when someone comes over and tries to log on, they can't until we restart the airport.  Then they can get on, but it knocks one of our devices off the network.  Any ideas?

    Our airport extreme network works fine with our 6 devices. But when someone comes over and tries to log on, they can't until we restart the airport.  Then they can get on, but it knocks one of our devices off the network.  Any ideas?

    I have not done a factory reset, I was trying to find out if I had some setting configured wrong first.  I figured I'd just make things worse if went through a reset! 
    Here is a couple of screen shots:

  • On my iPad mini, my inbox number count is over 500 even though the inbox. Is empty. All accounts do this on my iPad but all my other device are fine. Problem showed up two weeks ago???

    On my iPad mini, my inbox number count is over 500 even though the inbox. Is empty. All accounts do this on my iPad but all my other device are fine. Problem showed up two weeks ago???

    Hi Peter,
    Thanks for participating in the Apple Support Communities.
    It sounds like the Mail app on your iPad mini is showing that you have over 500 unread email messages, but your inbox is actually empty.
    There are several steps I'd use to troubleshoot this situation.
    First, restart your iPad to see if it clears up the symtom:
    Restart or reset your iPhone, iPad, or iPod touch - Apple Support
    Press and hold the Sleep/Wake button until the red slider appears.
    Drag the slider to turn your device completely off.
    After the device turns off, press and hold the Sleep/Wake button again until you see the Apple logo.
    If this doesn't correct the behavior, try removing and re-adding the affected email accounts next:
    Get help with Mail on iPhone, iPad, and iPod touch - Apple Support
    Delete the affected email account from your device.
    Tap Settings > Mail, Contacts, Calendars.
    Tap the affected email account.
    Tap Delete Account.
    Add your account again.
    If the same thing happens after re-adding the account, you may need to use the steps below to reinstall iOS. You may want to back up your iPad to iTunes before completing this step.
    Make sure that you have iTunes 12 or later on your computer.
    Put your device in recovery mode.
    When you get the option to restore or update, select Update. This will reinstall iOS without erasing your data.
    From:
    If your iPhone, iPad, or iPod touch doesn't respond or doesn't turn on - Apple Support
    All the best,
    Jeremy

  • HT2931 I am trying to figure out how to get the pre made "beats" with my garage band for my MacBook Air can u help

    I am trying to figure out how to get the pre made "beats" with my garage band for my MacBook Air can u help

    Hello Mattxy2,
    Thank you for the question. It sounds like you would like to add some Apple Loops to your project.  I recommend reviewing the following sections in Garageband Help:
    GarageBand Help - Search for Apple Loops
    http://help.apple.com/garageband/mac/10.0/#gbnd3002ab64
    GarageBand Help - Add Apple Loops to your projects
    http://help.apple.com/garageband/mac/10.0/#gbndc1d3db81
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • I keep getting a message saying can't connect to iTunes store? Any ideas I had been downloading without any problems

    I keep trying to update my apps and but new apps nd the message appears 'that I can't connect to the iTunes store' I have tried using a friends iPod and he gets the same message, any ideas?

    Try a Reset [Hold the Home and Sleep/Wake buttons down together for 10 seconds or so (until the Apple logo appears) and then release

  • Safari 6.0.1 won't load web pages randomly, and says website unavailable/no connection. But, all my other devices do have a great connection. Is there a fix for this problem?

    I recently bought OS X mountain Lion, and safari 6.0.1 was running great for a short period of time when it stopped loading the web pages. It will randomly do this now and then. I try resetting safari to no avial, and when I do a system reset it provides a temporary fix. It's very annoying problem. I know it is not a connection problem because all my other devices get internet connection. Safari will say no connection/web site is unavailable. The OS I have is OS X ML 10.8.2. Any suggestions?

    I do a system reset
    System reset ???
    Try a different DNS ...
    Quit Safari.
    Open System Preferences / Preferences then select the Network tab. Click the Advanced tab then click the DNS tab.
    Click +
    Enter these addresses exactly as you see them here.
    208.67.222.222
    Click +
    208.67.220.220
    Then click OK.
    Try Safari.

  • Macbook air can't connect to wifi but at the same time is connnected.

    Hey there fellow mac users, I got myself a tiny problem around here.
    My mid 2013 mba is connecting to my wifi at home, but when it's done connecting (and shows it's connected at the network panel) it doesn't load anything from firefox, safari, steam, apps, twitter etc etc. The problem lies within my mba I think, because all our other devices, (windows laptops, android phones, windows pc's and our ipad) can connect to the wifi and actually use it.
    Here's a few things I tried :
    I tried turning it on and off (basic everyone does that)
    resetting the router which I am connected to
    creating a new wifi location
    using different dhcp adresses (i set it to 8.8.8.8. to test it with google)
    and as a final thing I heard one of my friends worked around with something on the hardware (a 1453 thing Idk what it does but it didn't fix it)
    Is there someone with enough knowledge of internet connectivity on Macs willing to help?

    It appears that you have a question about the MacBook Air.......and we handle support for the Apple AirPort Express, AirPort Extreme and Time Capsule on this forum......so you will likely get a much faster and more informed response if you ask your question about a MacBook Air in the MacBook Air support forum.
    The link is just below:
    MacBook Air
    If you do have a question about one of the Apple routers, we can likely help on that.

  • In my small office ethernet network all of a sudden one of my imacs cannot be connected to. It can connect to all other computers and can access internet, but as soon as someone tries to connect to that mac, it disconnects from the network. Any ideas

    I have a network of 9 macs that connect via ethernet and a router. All of a sudden one of the macs cannot be connected to. It can connect to all others and the internet, but no one can connect to that one. I have appletalk active and file sharing on, but everytime someone tries to connect to it, it is not on the network. Additionally, the personal file sharing keeps turning off even though I have it locked. Any ideas?

    Hi orangekay
    not sure where you got the idea that I have
    bizarre encrypted filesystem plugins and scripts you have manipulating them all the time
    because I do not have any such running, just normal Applescripts that do tasks that could be done by hand.

  • TS1398 when I ask to join my wifi BT home Hub it accepts my password snd tries to connect but then comes up with 'unable to join the network'.  Any ideas?

    I am unable to connect to wifi through my BTHomehub.  When I try locates it them tells me it cannot join the network even after entering my password.  Any ideas?  I have done the reset of settings as adised by the aPPLE SUPPORT.

    I am unable to connect to wifi through my BTHomehub.  When I try locates it them tells me it cannot join the network even after entering my password.  Any ideas?  I have done the reset of settings as adised by the aPPLE SUPPORT.

Maybe you are looking for

  • PI Message Archive and Delete

    Hi Guys,   How will check PI messages whether particular messgae we can do ARCHIVE or particular message we can DELETE ? Can any one one pls help me on this how to check in PI. Thanks, Siva.

  • Appalling Q10 battery life

    I've been having problems with the battery life on my Q10 for several months, and is continuing to get worse. I've had absolutely no success with offical BlackBerry help, so I'm coming here as a last resort before I finally jump ship and get an Andro

  • Weblogic Domain Cloning

    Hi I have FMW 11g installed with Middleware Home, IDM (OID Only) and PFRD. I tried using cloningclient.jar and applyclone.jar to new server but it doesn't clone Weblogic Domain. I don't SOA installed, so I don't have copyConfig and pasteConfig script

  • HT1338 Tried to download the OS X ML upgrade - getting: The product distribution file could not be verified. It may be damaged or was not signed.

    I am running Lion 10.7.4. Tried to download the OS X Mountain Lion upgrade in my App Store - getting: The product distribution file could not be verified. It may be damaged or was not signed. Any ideas?

  • Your AppleCare TechTool disk doesn't work?

    As many who purchased the last of the G5 iMacs knows, the TechTool Deluxe disk provided with AppleCare didn't work, i.e. you could not boot up your iMac with it. I spoke to AppleCare about this two weeks ago, and they denied that version 3.0.4 was no