What is the correlation of Logger Private network to Router Private Network.

What is the correlation of Logger Private network to Router Private Network.
You have to define them in Websetup for the Router and Logger but what is communicating on the Private network path between the Logger and Router?    I thought that was over the Public network.  is it only Recovery from the Loggers talking over the Private network?

Hi,
you can read about the types of messages exchanged over various links in the SRND.
G.

Similar Messages

  • What are the Processor, Operating system, hard drive device, Total Memory, Network card, System Graphics of the Silver ipad air

    what are the Processor, Operating system, hard drive device, Total Memory, Network card, System Graphics of the Silver ipad air?

    "Memory" in this case means RAM, the working space for the processor in the iPad. It is different from storage space, the latter being what is referred to by the "32GB", "64GB" etc. specification.
    Regards.
    Message was edited by: varjak paw

  • What's the username & password when i connect device from cisco network assistant

    what's the username & password when i connect device from cisco network assistant?
    http://i200.photobucket.com/albums/aa273/wallfire02/Capture_zpsa8f5fd2b.jpg

    Although that may be true...
    If I click the "Connect As..." button it asks for a username and password.
    I've experienced connecting to other user's computers on a network.  To gain access to their computer, I just use their username and password.  I've done this before to transfer files without using a flash drive or burned disk. 
    I'm trying to find out what I'm supposed to log on as to gain access to this device...
         My point is that yes, I'm connected to it by wifi.  Otherwise it wouldn't show up; ha-ha! 
    Is my point really that hard to grasp?

  • What is the Compatibility Tab grayed out for applications on some network shares, but not others?

    I have a network share with an executable file located in it. If I browse to the share by UNC path from a Windows 7 pro workstation and go to the compatibility tab of the .exe, the options are grayed out.
    I have another network share with an executable file located on it. This share and workstation are at a different location, unrelated to the first example. If I browse to the share by UNC path from a Windows 7 pro Workstation and go to the compatibility
    tab of the .exe file, the options are not grayed out, and I can check or uncheck what ever I need to.
    Both shares are located on a Server 2008 R2 system w/sp1. Both workstations are joined to the same domain as the server they are connecting to the UNC path on. Both shares have given the user connecting full access on the smb sharing and ntfs sharing.
    Someone please tell me how to make the compatibility tab not grayed out. Here is a screen shot of the comapatibility tab of the .exe file from both shares:

    Hi,
    You can use
    Troubleshoot compatibility to set the application to Compatibility Mode. 
    You can right-click the application’s shortcut and click Troubleshoot compatibility.
    Please refer to the similar thread and the third-party article below:
    Compatibility mode greyed out on exe that is on a mapped drive???
    http://answers.microsoft.com/en-us/windows/forum/windows_7-networking/compatibility-mode-greyed-out-on-exe-that-is-on-a/03c93e47-3d66-485c-b28f-73d06bc793d5
    Windows 7: Compatibility Mode
    http://www.sevenforums.com/tutorials/316-compatibility-mode.html
    In addition, since it is related to windows 7, you can ask in the forum below for further assistance if the issue persists:
    Windows 7IT Pro Forums:
    http://social.technet.microsoft.com/Forums/windows/en-US/home?category=w7itpro
    Best regards,
    Susie
    Thanks, but I read that link before I posted this. Even by running the compatibility wizard, you still can't edit the compatibility settings on Windows 7.

  • What is the fundamental difference between classful and classless routing?

    Hello to all,
    After reading several RFCs, guides and HOWTOs I am confused by an apparently trivial question - what is the basic, fundamental difference between classful and classless routing?
    I am well aware that - said in a very primitive way - the classful routing does not make use of netmasks and instead uses the address classes while the classless routing utilizes the netmasks and does not evaluate the address classes.
    However, already in 1985 the RFC 950 (Internet Standard Subnetting Procedure) stated that the networks can be further subnetted using the network mask. Since then the routers are expected to use network masks in the routing decision process in the precise way they use it nowadays. However, if the routers use network masks they are doing the classless routing, aren't they? Where is then the difference if we used to describe the 80's way of routing as a classful routing? Or was it already the classless routing? The RFCs about CIDR came gradually only in 1992 and 1993.
    If somebody could give me an insight into the key difference between classful and classless routing (and perhaps into the Internet history, how was the real routing done then) I would be most grateful.
    Thank you a lot!
    Regards,
    Peter

    Hello Mohammed,
    I am afraid we still have not understood each other ;) I am not looking for the algorithms used to select the best path. I am well aware of them, both Ford-Bellman and Dijkstra, and about their internals. By the way, these algorithms do not have any influence whether the routing is classful or classless because they deal with metrics, not with masks. For example, a classless EIGRP internally uses a distance-vector algorithm, not a SPF algorithm.
    I will try to explain once more what is my problem... There are two terms commonly used but badly defined: the classless routing and classful routing. Originally, I have thought that the classful routing works as follows:
    - The routing table consists only of classful destination networks (major nets), metrics and respective gateways. No network masks are stored in the table because we are classful, that is, we use exclusively the route classes and all entries in the routing table are already classful.
    - When routing a packet, the router looks at its destination IP address and determines the major net of this IP address (that is, the classful network that this IP address belongs to). Then it looks up the corresponding entry in the routing table and sends the packet to the respective gateway.
    I thought that the classful routing works in this way. I won't describe the classless routing - both of us know how do the today's routers select the next hop.
    However, in the RFCs 917 and 950 which were published in 1985, long ago before the term 'classless routing' was coined, the network mask was already defined and it was stated how the routers should work with it.
    Now I am confused. The terms classless addresses and classless routing were defined sometime in 1990's, therefore I assume that the routing before the invention of classless IP assignment can be in fact described as classful. In other words, I thought that the routing that was commonly used in 1980's did not use netmasks and can be described as classful because the notion of classlessness came first in 1990's. But now I see that netmasks were defined in 1985.
    Now where am I wrong? Do I understand the classful routing properly as I described it? Is it correct to talk about routing in that era as classful although the netmasks were already in use? Or was it already the classless routing?
    Basically I am trying to understand what was called the classful routing if the classless routing is said to be something different.
    Mohammed, I am most grateful to you for your patience and suggestions! Thank you indeed.
    Regards,
    Peter

  • What is the proper way to extend 2nd generation time capsule network to 2nd generation Airport Express?

    I have a Simultaneous Dual Band Time Capsule. Up until now, I have been extending the network with the Airport Express (2nd Gen, the 802.11n model). Since it was not simultaneous dual band, it was extending over the 2.4 GHz band so as it could extend b, g, and n and support my iPhone at 2.4 n as well as my iPad and MacBook Pro at 5 GHz.
    I just bought the new simultaneous dual band unit, which theoreticalkly should be able to extend both bands.
    Now, it is not that simple. I also run a guest network, which I assume also gets extended when WDS is on. I also still have the old Express which I have relegated to another part of the house.
    When I set up the new Express, it asked me which one of the networks I want to join, either <SSID> or <SSID 5GHz>, the automatically generated name for the the 5 GHz band on the Time Capsule. Which one do I join? How do I know that both are extended? When I connect to the <SSID 5GHz> now my iPhone can see that one and connect to it, so I am assuming it is NOT going at 5 GHz.
    And I have no idea at all what the guest network is doing....
    Does anyone have any insight into tthe proper way to configure all the units, and what I can expect? My network is as follows:
                                                                                             Airport Express (Simultaneous Dual Band)
    Cable Modem > Time Capsule (Simultaneous Dual Band) >
                                                                                             Airport Express (802.11n, last gen)
    I want to run guest network (hopefully simultaneous dual band) and personal network. I want the new express to run both bands just like the Time Capsule, and for the old express I want to know which of the two bands I am extending.
    Thank You!

    I also run a guest network, which I assume also gets extended when WDS is on
    Unfortunately, the Guest Network cannot be extended.
    When I set up the new Express, it asked me which one of the networks I want to join, either <SSID> or <SSID 5GHz>, the automatically generated name for the the 5 GHz band on the Time Capsule.
    This likely indicates that the Time Capsule has been setup to use separate names for the 5 GHz and 2.4 GHz bands, instead of the default, which uses the same wireless network name for both bands.
    In order for the AirPort Express to be able to extend both bands, the Time Capsule will need to be configured so that both bands use the same wireless network name.
    Then, configure the AirPort Express to extend the wireless network name of the Time Capsule, and it will extend both bands.  At least, that is the way an AirPort Extreme works, and I assume that the Express is the same. I don't have an Express here to test, but will in another day or two.
    The location of the Express is important, since the 5 GHz signals are not as strong as 2.4 GHz signals. You may need to experiment by placing the Express closer to the Time Capsule than normal.  With an AirPort Extreme, I find that the Extreme must be located no more than about half the distance from the main router to the area that needs more wireless coverage.
    If you continue to use the previous model Express to extend as well, it too must be configured to extend the wireless network name of the Time Capsule. Configured this way, the Express will extend the stronger of the 2.4 GHz or 5 GHz signals, so it will likely extend the 2.4 GHz band unless it is located close to the Time Capsule.
    To find out which band the previous model Express is extending, locate a Mac laptop close to the Express and hold down the option key on your Mac while you click on the AirPort icon at the top of the screen. The info displayed will indicate whether you (and the Express) are connecting using 2.4 GHz or 5 GHz.

  • What's the best way to save on a (sort-of) network?

    We are a small town newspaper moving from paste-up to full pagination in InDesign. We have two ladies who design ads. We have an editor who writes copy and several others who type copy and do stuff like obits, etc. For the last zillion years every single thing is printed, cut-out and pasted up on page sheets.
    We are moving into In-Design. Whatever each of us creates, we save on our machines. We have just setup not really a server, but a device (a LaCie) that we can all see.
    I have designed a folder system on the Lacie and just this week we are starting to place our completed documents up to it. This is also where the page templates will go.
    My question is about the ads and the page templates. Those all have links. Those links are back on the machines of the creator.
    So, Bonnie creates ads, she will want to put her ads on the page templates and then we will put the copy around the ads.
    How is the best way to resolve the issue of links and fonts? Should we package each ad to put it up on the LaCie? What about fonts? I went to another (even smaller) newspaper and they have a font folder on their server. I assume that all fonts draw from it.
    Is my question clear?

    Thanks for everyone's thoughts on the subject. A consultant would be nice but, keep in mind, weekly newspapers are very small potatoes and on very small budgets. I am the technical end of the business, coming from a school district where I coordinated education related technical issues. So, I don't know much (yet) about all the ins and outs of ID. We have CS3.
    I think the two ladies (who have worked here 20+ years) would QUIT if I moved all of their graphics to someplace other than their own machines where they know where everything is. Their new machines got a clone of their old machines and then we added OSX and CS3.
    All copy has identical fonts and paragraph styles. We will put all news photos that will appear on the page in a network folder. So those will be easily placed. It's just the ads that will cause the problems. And there are a zillion of them in varying sizes. And those ads are the money makers so they are the most important thing.
    We are going to experiment with how we go about doing this. I know that there will be 4 different people opening the page templates and adding "stuff". The problem would be resolved if the ads went on last, but they go on first and (as our editor says) that "crap" he writes just pads the ads.

  • What is the "?" for? i am connected to my network, but no print

    network okay, no print
    What is "?"

    Hi,
    Havd you add the network printer to your machine ? This note is for XP & Vista but should be vary similar for Windows 7
      http://tips4pc.com/articles/windows%20vista/how_to_add_a_network_printer_in_windows_vista_or_windows...
    Regards,
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • What is the use of XML as a transfer syntax for network protocols

    I do not quite understand the use of XML as a transfer syntax of wire protocols. What is its use over binary encodings?

    Also, see ASN.1
    XML is used because decision makers, usually managers, think that because it's human readable, that makes it simple to process. Unfortunately, this is far from true. It is very costly to process, because parsing it involves examining every character.
    It's also incredibly wasteful of bandwith. In due course someone will propose a compression scheme for it, and then someone else will ask why we don't just use the compressed form as the protocol, and forget the text representation.
    Sylvia.

  • What is the best approach to send/recv multiple types of network packets from server/client?

    I am writing two programs (server.vi) and (client.vi).  that communicate with each other over a TCP connection. 
    After the client opens a TCP connection with the server, the server responds with a packet of type "A".  The client sends another packet of type "A" back to the server as an acknowledgement.  At this point the server starts sending a continous stream of packets of type "B" to the client.  And the client starts sending a continous stream of packets with type "C". 
    This means the sending an receiving of packet with types B and C will be in parallel. 
    How should I implement something like this in labview?
    Here is one idea i have and I was hoping someone could either comment or provide a better suggestion.
    1. the server has two while loops
         a. first while loop consists of a TCP read function that receives packets of type "C".
         b. second while loop consists of a TCP write function that sends packets of type "B"
    2. the client has two while loops
        a. first while loop consists of a TCP write function that sends packets of type "C"
         b. second while loop consists of a TCP read function that receives packets of type "B".
    This way we are sending and receiving packets of type "B" and "C" in parallel. 
    Does this make any sense? Is there a more clever / better aproach to doing this?

    Putting the sending and receiving code in separate loops is a reasonable thing to do. You will need a bit of logic to handle a dropped connection, since you will need to pass the new connection information to both loops when the connection is re-established.

  • What is the big white button on my new router

    I have a newly installed MI424-WR Rev. E router and even though I was able to set it up and get it working on my own, I am courious about this large white button (which is apparently a switch since it clicks when pushed)  which is labeled "Setup Wi-Fi protected". It glows orange when the unit is powered up but turns off after a few seconds.  the user manual does not even show it on the drawing. I would like to know what it does and what position it shoud be in during normal operation.
    Solved!
    Go to Solution.

    ITs not enabled by Verizon at least at this time.  Its there because Actiontec makes routers for other companies and individuals as well.  For such it may be enabled

  • What are the correct settings for my wireless-n router?

    I was just upgraded at home with a Huawei HG8245 Fiber Optic Wireless-N router.  The default Setting is:
    WPA/WPA2 Pre-Share, TKIP/AES, Auto Channel and 20Mhz Channel Width.
    I cannot surf past 10 feet from the router.  I switched the Security to TKIP, and it goes to Wireless-G and I can surf all around my apartment.  I did AES only, goes back to Wireless-N, and again the 10 feet issue.  Selected WPA2 only...same thing.
    Any ideas or solutions?
    Paul

    I have opened ports 80, 443,and 4125 to PCP.  The  router address is http://192.168.1.1, my address is 221.40.138.170.
    Thank you.

  • What is the max. bandwith limitation on cisco 2621XM router

    Hi all,
    I am new to this forum. The need to learn more about cisco has driven me to this forum. The topics are very helpful.
    As per the datasheet provided on Cisco site, 2621XM supports
    NM- 1
    AIM- 1
    WIC - 2
    FE - 2
    Performace - 30 kpps.
    I would like to know the maximum bandwidth it can take.
    regds,
    Mahesh

    Mahesh,
    there is no way to go from PPS to bandwidth withouth further hypotesys. The reason way I am saying so is because packet size varies and even switching methods varies so the router might be faster tha expected. I suppose that those 30 KPPS are process switched (which means the router CPU is interrupted to look up the routing table, make a routing decision and queue the packet).
    So enabling things like CEF (cisco express forwarding) only the first packet generates an interrupt the rest of the flow will not.
    I suggest a basic reading on the subject here:
    http://www.cisco.com/en/US/customer/products/sw/iosswrel/ps1831/products_tech_note09186a00800a7306.shtml
    Cheers
    Fabio

  • What are the differences between aiport extreme and linksys wireless router

    We currently have an apple macbook connecting to the internet via a linksys router. We are considering an airport extreme wireless router, we are considering the cost. What are the advantages of purchasing an Airport Extreme router.... ??? Currently my wireless access appears to be more than adequate.

    ellis911 wrote:
    What are the advantages of purchasing an Airport Extreme router.... ??
    Besides Bob Timmons' comments, an AirPort Extreme supports these things, which your Linksys router may or may not support:
    - A USB-connected networked disk drive
    - A USB-connected printer that can be shared by all computers on your network
    - MobileMe access to your local resources from outside your local network
    - Configuration via a dedicated program, rather than via a browser interface
    If none of these interests you or if any that interest you are already offered by your current router, and if you're happy with your Linksys router, then I'd keep the Linksys router.

  • What's the best practice to manage the page file?

           
    We have one Hyper-v Server running windows 2012 R2 with 128 GB RAM and 2 drives (C and D). It setup Automatically manage page file size for all drives. What's the best practice to manage the page file?
    Bob Lin, MCSE & CNE Networking, Internet, Routing, VPN Networking, Internet, Routing, VPN Troubleshooting on http://www.ChicagoTech.net How to Install and Configure Windows, VMware, Virtualization and Cisco on http://www.HowToNetworking.com

    For Hyper-V systems, my general recommendation is to set the page file to 1-4 GB. This allows for a mini-dump should something happen. 99.99% of the time, Microsoft will be able to figure out the cause of the problem from the mini-dump. It does not make
    sense on a Hyper-V system to set aside enough space to capture all the memory on the system because only a very small portion of that memory is used by the parent partition. Most of the memory is under control of the individual VMs.
    Yes, I had one of the Hyper-V product group tell me that I should let Windows manage it.  A couple of times I saw space on my system disk disappear because the algorithm decided it wanted all the space for the page file.  Made it so I couldn't
    patch my systems.  Went back in and set the page file to 1-4 GB and have not had any issues since.
    . : | : . : | : . tim

Maybe you are looking for