What is the easy way to create this?

I can create this with five text stacks, how would I insert the graphics?

I decided to make my own png arrows and a vertical line and place them above the five basic text overlays.
I have to be able to add to graphic as the speaker adds more.
This is how it looks now.

Similar Messages

What is the best way to create this image?

Hi, I'm using Illustrator CS5 and I'm sure there is a pretty easy way to create this image with some copy/repeat steps... However I can't seem to figure it out.
Any suggestions?
Thanks!

Ace,
You may:
1) Create the circle,
2) Create a triangle from a square by deleting the bottom right Anchor Point (Delete Anchor Point Tool),
3) Place the triangle for the cutout just to the left of the top of the circle (where the angles fit),
4) Rotate 8 copies round the centre of the circle (you may use the Effect route but you will need the real paths),
5) Select the trangles and the circle and apply Minus Front (or whatever the Pathfinder command is called in your version.

What is the easy way to create a crossword with InDesign CS5 for a interactive pdf?

I mean I want to create a pdf magazine and i like to include a crossword. I read somewhere that one way is create a crossword with an external software and include it in the ID project but I don't know any crossword software and if I add in my ID project, I only need to export like a interactive pdf? I would like that the users can use the crossword in online version.
Regards from Lima, Perú

Hi.
I'm not sure about what to you mean. But I create first the crossword with Excel, I mean to put the words in the right order and the questions and/or cue too. Then I create a table in InDesign and format some cells with black background and some borders. I upload both captures, from Excel and from InDesigne. Then with Adobe X Pro I create a form, so I can create singles inputs for the crossword.
I hope i understand your question.
Regards from Lima, Perú

What´s the easiest way to create this type of timeline?

http://www.dn.se/nyheter/varlden/tidslinje-tyskland-fran-kriget-till-murens-fall/
I´m certain this is done in Edge. Can someone explain how the timeline is created so that everything scrolls backwards and forwards, regardless of where on the timeline you click?
Any help would be much appreciated

Here is the sample made in 2014.0.1 (previous version).
Check the code in compositionReady for the next and back buttons. Basically it increment 90 degrees every time you click next and opposite side when you click back.
Click on container div and see that it has the perspective_1200 center class.
Click on the cube div and see that it has the cube3D class.
tight gallery.zip - Box

HT1451 I need to move my library from my old computer to my new laptop. What's the best way to do this?

I need to move my library from my old computer to my new laptop (Windows 8). What's the best way to do this?

These are two possible approaches that will normally work to move an existing library to a new computer.
Method 1
Backup the library with this User Tip.
Deauthorize the old computer if you no longer want to access protected content on it.
Restore the backup to your new computer using the same tool used to back it up.
Keep your backup up-to-date in future.
Method 2
Connect the two computers to the same network. Share your <User's Music> folder from the old computer and copy the entire iTunes library folder into the <User's Music> folder on the new one. Again, deauthorize the old computer if no longer required.
Both methods should give the new computer a working clone of the library that was on the old one. As far as iTunes is concerned this is still the "home" library for your devices so you shouldn't have any issues with iTunes wanting to erase and reload.
I'd recommend method 1 since it establishes an ongoing backup for your library.
If you have an iOS device that syncs with contact & calendar data on your computer you should migrate this information too. If that isn't possible create a dummy entry of each type in your new profile and iTunes should offer to merge the existing data from the device into the computer, otherwise the danger is that it will wipe the information from the device.
If your media folder has been split out from the main iTunes folder you may need to do some preparatory work to make it easier to move. See make a split library portable.
Should you be in the unfortunate position where you are no longer able to access your original library, or a backup of it, then see Recover your iTunes library from your iPod or iOS device for advice on how to set up your devices with a new library with the maximum preservation of data. If you don't have any Apple devices then see HT2519 - Downloading past purchases from the App Store, iBookstore, and iTunes Store.
tt2

Narrating Keynote (Voice over slides)? What is the best way to do this?

If I have a keynote presentation and I need it narrated (like a a voice over) what is the best way to do this?
Is it to record an audio file then insert it somehow into the presentation?
Sorry if this is a dumb question, just not sure how to make it work. I need my boss to do the voice over- so I will probably only get one shot.

This forum thread offers some options to do this. One simple strategy is to record separate bits of narration for each slide, and simply attach that to each slide. When the presentation is run, the audio file will play for each slide. This approach is much easier than alternatives, but the downside is that it does not allow for narration across slides, which may or may not be important to you. If it is necessary, then you should check out the option (discussed in the thread) of pre-recording the entire narration, then using Soundflower and Keynote's Record Slideshow functionality to create a show with narration.

What is the best way to create a SSRS 2005 Line Chart Report for a 12 month period?

I'm looking for advice on how to create a SQL Server 2005 query and line chart report for SSRS 2005.
I need to display the peak number of patients assigned to a medical practice each month for a 12 month period based on the end-user selecting a
single month and year.
I've previously created a report that displays all patients assigned to the practice for any single month but I’m looking for advice on how to
how to produce a resultset that shows the peak number of patients each month for a 12 month period. I thought about creating a query that returns the peak count for each month (based on my previously created report which displays all patients assigned to the
practice for any single month) and then use a UNION statement to join all 12 months but I'm sure that isn't the most efficient way to do this. The other challenge with this approach (twelve resultsets combined via a UNION) is that the end-user needs to be
able to select any month and year for the parameter and the report needs to display the 12 month period based on the month selected (the month selected would be the last month of the 12 month period).
For the report I’ve previously created that displays all patients assigned to the practice for any single month, the WHERE statement filters the
resultset on two fields:
Start Date - The date the patient was assigned to the practice. This field is never null or blank.
End Date - The date the patient left the practice. This field can be null or blank as active patients assigned to the practice do not have an End Date. When the patient
leaves the practice, the date the patient left is populated in this field.
Using these two fields I can return all patients assigned to the practice during Nov 2012 by looking for patients that meet the following criteria:
start date prior to 11/30/2012 (using the last day of the month selected ensures patients added mid-month would be included)
AND
end date is null or blank (indicates the patient is active) OR the end date is between 11/1/2012 -11/30/2012 (returns patients that leave during the month
selected)
Regarding the query I need to create for the report that displays the peak count each month for 12 months, I'm looking for advice on
how to count patients for each month the patient is assigned to the practice if the patient has been assigned for several months (which applies to most patients). Examples are:
John Doe has a start date of 6/01/2012 and an End Date of 10/07/2012
Sally Doe has a start date of 8/4/2012 and no End Date (the patient is still active)
Jimmy Doe has a  start of 7/3/2012 and an End Date of 9/2/2012
Given these examples how would I include John Doe in the peak monthly count each month for May - October, Sally Doe in the peak monthly count for
August - December and Jimmy Doe in the peak monthly count for July – Sept if the end-user running the report selected December 2012 as the parameter?
Given the example above and the fact I'm creating a line chart I think the best way to create this report would be a resultset that looks like
this:
Patient Name
Months Assigned
John Doe
June 2012
John Doe
July012
John Doe
Aug 2012
John Doe
Sept 2012
John Doe
Oct 2012
Sally Doe
Aug 2012
Sally Doe
Sept 2012
Sally Doe
Oct 2012
Sally Doe
Nov 2012
Sally Doe
Dec 2012
Jimmy Doe
July 2012
Jimmy Doe
Aug 2012
Jimmy Doe
Sept 2012
From the resultset above I could create another resultset that would count\group on month and year to return the peak count for each month:
June 2012 - 1
July 2012 – 2
Aug 2012 - 3
Sept 2012 - 3
Oct 2012 - 2
Nov 2012 - 1
Dec 2012 - 1
The resultset that displays the peak count for each month would be used to create the line chart (month would be the X axis and the count would
be the y axis).
Does this sound like the best approach?
If so, any advice on how to create the resultset that lists each patient and each month they were assigned to the practice would be greatly appreciated.
I do not have permissions to create SPs or Functions within the database but I can create temp tables.
I know how to create the peak monthly count query (derived from the query that lists each patient and month assigned) as well as the line chart.
Any advice or help is greatly appreciated.

Thanks for the replies. I reviewed them shortly after they were submitted but I'm also working on other projects at the same time (hence the delayed reply).
Building a time table and doing a cross join to my original resultset gave me the desired resultset of the months assigned between dates. What I can't figure out now is how to filter months I don't want.
Doing a cross join between my original resultset that had two dates:
08/27/2010
10/24/2011
and a calendar table that has 24 rows (each month for a two year period)
my new resultset looks like this:
I need to filter the rows in yellow as the months assigned for stage 3 that started on 8/27/2010 should stop when the patient was assigned to stage 4 on 10/24/2011.
You'll notice that Jan - Sept 2011 isn't listed for Stage 4 assigned on 10/24/2011 as I included a filter in the WHERE clause that states
the Months Assigned value must be greater than or equal to the date assigned value.
Any advice would be appreciated.

What is the best way of creating admin-only parameters for a java iView?

Hi,
I would appreciate some advice from more experienced developers...
The scenario is as follows: I have created an Org Chart maintenance application that generates and renders xml&xsl-based Org Charts. This is the maintenance iView.
I am creating a second iView that points to each org chart(the 'Viewer' iView). This iView will be re-used many times, for different parts of our organisation. My problem is I want the portal administrator to be able to set the specific Org Chart that each instance of the 'viewer' iView points to. This needs to be editable as a configurable property.
I imagine that this is accomplished through the use of properties, what is the best way to accomplish this?
Many thanks,
Mark Hockings

I believe that you should be able to specify the 'personalization' property to be no-dialog. This doesn't allow users to be able to change the property, but can be changed when creating the iView definition
I hope this helps
D

What is the best way to create a database schema from XML

What is the best way to create a database schema from XML?
i have a complex XML file that I want to create a database from and consistently import new XML files of the same schema type. Currently I have started off by mapping the XSD into Excel and using Mysql for Excel to push into MySQL.
There must be a more .net microsoft solution for this but I cannot locate the topic and tools by searching. What are the best tools and way to manage this?
Taking my C# further

Hi Saythj,
When mentioning "a database schema from XML", do you mean the
XML Schema Collections? If that is what you mean, when trying to import XML files of the same schema type, you may take the below approach.
Create an XML Schema Collection basing on your complex XML, you can find
many generating tools online to do that.
Create a Table with the above created schema typed XML column as below.
CREATE TABLE youTable( Col1 int, Col2 xml (yourXMLSchemaCollection))
Load your XML files and try to insert the xml content into the table above from C# or some other approaches. The XMLs that can't pass the validation fail inserting into that table.
If you have any question, feel free to let me know.
Eric Zhang
TechNet Community Support

What is the best way to create a read more/collapse text box on the homepage of a site?

What is the best way to create a read more/collapse text box on the homepage of a site?

I figured this out by using a lightbox. I set the trigger at the top of the box, hid all initially and added a close button. In the box that would have linked to the first thumbnail for the lightbox, I added a text box that said "read more"

What is the best way to create Aperture book from Pages '09 document?

What is the best way to create Aperture book from Pages '09 document?

There is no way to import pages documents to Aperture and convert them to an Aperture book. Aperture books can only be created by manually adding images and text to the pages of a book, and using the layout of the predefined templates.
The best you could do, would be to print your pages document to pdf and import the resulting pdf file into Aperture as a new project. This will create one image for each page. Then select the page images all at once and create a new book. Select a theme with fullsize page images, like "picture Book", and then add the images of the pages to the empty pages of the book.
But probably would you get a much better quality and layout, when you recreate your pages document in Aperture, by starting with an empty book and copying and pasting the text from your Pages document. But don't paste the photos from the document - try to use the originals of those photos.

Dw, css, and a template, what is the best way to create a 20 page website with a different header in each page?

dw, css, and a template, what is the best way to create a 20
page website with different header content on each page? i am
trying to insert a specific image and background color for each
header on every page. what is the easiest or best way to do this?
thanks, bryan

"mediastream13" <[email protected]> wrote in
message
news:f47bes$9om$[email protected]..
> ok, murray, here is the site.
http://www.helphotline.org
> in I.E. 6 i can't see the background color behind the
header images,
I'm seeing a hot pink background (which is my browser default
- so that I do
remember to declare a background color). You need to add:
body { background-color: white;} to your stylesheet, or into
the imbedded
styles on your page.
In Firefox, the very top black section, #headertop is hidden
behind the
header image.
> background of the date/time isn't stretching the full
length of the
> screen, and
> the margins aren't working in the main content area. how
can i put a
> background
> color behind the header images?
I can see the header image stretching right across the page..
so not sure
what color is missing there.
> is there anyway to download i.e. six on my computer if i
already have
> i.e.7? i
> just want to be able to preview the site before i upload
the changes. it
> seems
> everything works in i.e. 7.
Yes, I used this and it works really well.
http://tredosoft.com/Multiple_IE
Nadia
Adobe® Community Expert : Dreamweaver
CSS Templates |Tutorials |SEO Articles
http://www.DreamweaverResources.com
~ Customisation Service Available ~
http://www.csstemplates.com.au

What is the best way to create a Flash site

Hello Everyone,
I am realtively new to flash. I created the splash page of
our site in flash but 1st off it takes to long to load as it is.
But I would like to create the entire site in Flash. What is the
best way to create a Flash site, and are there tutorials out there
or any really good books, resources, or online classes to learn
Flash well. I understand the basic of flash and have created
banners, and other flash materials.
Can anyone help?

For me, as a noob, It's all about creative problem solving.
For lots of stuff, there's no right or wrong solution, but you have
to figure things out on your own. I, too, have built sites from the
ground up, and then rebuilt them even better. It's the only way to
really learn it well. Books, online forums, help docs all sort of
help, but it all comes down to how innovative you can be with
integrating them all into a site that is completely yours.
This might save you loads of headaches: avoid using scenes,
unless you are doing only animation. Keep each of your 'pages' on
their own keyframe, and use 'gotoAndStop' to navigate through them.
This is perhaps the easiest way to create a website quickly.
P

I have two videos and I would like to use parts of both videos with one audio track what is the best way to edit this?, I have two videos and I would like to use parts of both videos with one audio track what is the best way to edit this?

In Final Cut Express I have two videos I'd like to merge parts of each video into a final film. What is the best way to do this in FCE?

Hi
I use a slightly different way than Alchroma.
Same
• One video on track 1 and the other on Video.track 2
• Resize to 25% and move one to the left and the other to the right
Diff
• I don't use the blade tool
• I use the Pen tool and change the transparency - then I get fast or slow transitions in same stroke and easy to fine-tune later if needed. (But this can be done with the Roll-tool if Blade is used - so it might be as easy)
Final
• Resize to 100% and Center
Video is done
Audio - very close to this by changing the level so that best audio will dominate
• Pen tool here too
But that's me - the Alchroma way is as good as this or may be better for some
Yours Bengt W

What is the best way to create 10000 users in ECC system

Dear all,
what is the best way to create 10,000 users in ECC 6 system.
As of my knowledge we can create with SECATT, but I don't know the procedure to use this.
please guide me...
Regards,
Raaja

Hi Raaja,
If you search in SDN or on google for eCATT tutorial, you will get all the info you need to learn to create them.
For 10000 users I would suggest the following
1. eCATT to create user ID's (include all the info like passwords, user groups in here).
2. eCATT to make the role assignment. Use SU10 to record the assignment to the users you created with the first script as it gives you more flexibility
If you have the data you need then you should be able to run both steps in 1 work day (dependent on system performance).
Edited by: Alex Ayers on Jan 25, 2009 11:16 AM

What is the easy way to create this?

Similar Messages

Maybe you are looking for