What is the error for sw1 sw2=6f 00
Hello there,
I got a sw1 sw2 = 6f 00
What is the likely error i got.
i got this error when i am trying to select my applet
Thanx.
hi!
0x6f00 is javacard.framework.ISO7816.SW_UNKNOWN, 'No precise diagnosis'.
What it means is that somehow he is unable to manage your data, many times this erros is due to an uncatched exception during is execution...
Bye
Similar Messages
-
I recently upgraded to Mac OS X. I haven't tried to access anything in iWorks 09 since the upgrade, until now. I get an error message when trying to open any of the iWorks 09 applications. What's the fix for this?
Follow Sonicray's advice and when you post try to give as much info about your Mac, your OS, etc... Fill out your Profile info.
-
ANY BODY TELL ME WHAT IS THE REASON FOR THIS ERROR
hi... experts....
Iam having one screen in my previous module pool program....and now as per my requirement i added on e new field...
for that...
1. i declared one variable in top include...
2. cretaed one more new block with help of box in layout screen..
3. added some text field and inputput out field...
4. and in that block i also added one line with test like... following...
" NOTE: PLEASE ENTER THE ..... VALUE..." Like this.... just for to give direction...
so these are the steps i taken to add new field to my screen... but here i am geting error ... while entering the value in that field and press any push button.... including back in that screen... like....
"INVAILD FIELD FORMAT (SCREEN ERROR)"
.... ANY BODY TELL ME WHAT IS THE REASON FOR THIS ERROR... COMMONLY???
THANK YOU,,,
NAVEEN..hi naveen,
there can be problem from ur layout side.
Goto SE51. in Layout editor make sure that the type in screen and in TOP Include is same.
and if you are using currency field than it can also give error to you.
if still you any error .
give me type of variable whcih you defined in TOP and also code.
give reward if helpfull. -
Deactivation of Photoshop CS3 leads to an error 1914:1 what ist the solution for this problem
hello
I try to deactivate photoshop CS3 on my win XP system. When I try this I get the error code 1914:1 . This says there are no activations. But when I try to activate it on the new WIN 7 system
I get the message to many activations. What is the soltion for this problem?Contact support by web chat.
Mylenium -
I swithced it on by clicking on options when I start up and then clicked on Macintosh HD. the other option was a question mark and network drive.
Is there a way to ensure it never happens again, what is the cause for this problem, if I need to uninstall some application, i am happy to do it as long as I know what is causing this conflict.
many thanks!Something is not making sense here.
You claim this is a brand new machine and you have not tried to install Windows or Boot Camp.
Then why would you ever even go into System Preferences > Startup Disk and choose Macintosh HD? It should have automatically booted into Macintosh HD.
You're probably going to have to reinstall Mac OS X. -
My ipod nano 6th gen fell out of my pocket and the screen cracked badly, is there any coverage for this under warranty? I just bought it a month ago. If not what are the options for getting it fixed? It is pretty frustrating, it fell from about 3 feet out of my pocket and now looks like it was beaten by a hammer.
Debbie:
deborahfromwindsor wrote:
he advises restarting by inserting the OSX disc and pressing down the C button to reboot from there then selecting disk utility, hard disk and repair.... Does he mean me to hold down the C key on the alpha keyboard or the ctrl key?
Should I just ask for my money back??? If it is a simple repair do I just literally push the disc in, push the power button and hold down the C button?
That's where I would begin, too, with
Repair Disk
Insert Installer disk and Restart, holding down the "C" key until grey Apple appears.
Go to Installer menu (Panther and earlier) or Utilities menu (Tiger) and launch Disk Utility.
Select your HDD (manufacturer ID) in the left panel.
Select First Aid in the Main panel.
(Check S.M.A.R.TStatus of HDD at the bottom of right panel, and report if it saysanything but Verified)
Click Repair Disk on the bottom right.
If DU reports disk does not need repairs quit DU and restart.
If DU reports errors Repair again and again until DU reports disk is repaired.
If DU reports errors it cannot repair you will need touse autility like TechTool Pro,Drive Geniusor DiskWarrior
First we need to determine if the issue you are experiencing with the computer is software or hardware based. Once we have gotten things sorted out there should be time enough to make you decision about keeping or returning it.
cornelius -
What is the alternative for DisplayMemberPath="Value" for Windows Store applications?
I think there is a bug with Windows Store Applications when it comes to using DisplayMemberPath="Value".
Here is my code
<ComboBox Height="40" VerticalAlignment="Stretch" SelectedValuePath="Key" DisplayMemberPath="Value" x:Name="comboBox1" FontSize="25"/>
var source = new Dictionary<string, double>();
source.Add("Item1", 0.4);
source.Add("Item2", 0.3);
source.Add("Item3", 0.1);
source.Add("Item4", 0.1);
var formateDSource = new Dictionary<string, string>();
foreach (var item in source)
formateDSource.Add(string.Format("[{0}, {1}]", item.Key, item.Value), item.Key);
comboBox1.ItemsSource = source;
If you use this code in WPF in works perfectly. However if you use this code in a Windows Store Application then the Combo Box is empty and an error is thrown. So is there an alternative way to do this in Windows Store Applications and have I unearthed a
bug? Because I have researched the Web for days and found no solution to this.*please do not comment unless you have tried my code as a Windows Store App not a WPF in Visual Studios. Can Someone post an example based on my code that works in Windows Store
Apps please because this is terrible.
ThanksIt looks like you got an answer on SO:
http://stackoverflow.com/questions/29817124/what-is-the-alternative-for-displaymemberpath-value-for-windows-store-applicat
This does look like a bug.
Matt Small - Microsoft Escalation Engineer - Forum Moderator
If my reply answers your question, please mark this post as answered.
NOTE: If I ask for code, please provide something that I can drop directly into a project and run (including XAML), or an actual application project. I'm trying to help a lot of people, so I don't have time to figure out weird snippets with undefined
objects and unknown namespaces. -
What are the settings for Primere Elements 9 if I've filmed with a Canon Powershot sx50 HS?
I just got this camera and I want the best quality possible. Unfortunately, it's hard for me to fully know if the settings I try create that. I get a fuzz or noise on objects like if I'm wearing a black jacket it's like static. When I put the video on my phone which is an Android Galaxy s4 it converts it into mp4 format and I get much more clear results than on my computer which perplexes me. I did a lot of trial and error with my previous camera (JVC Full HD Everio) which I got the same results. My newer Canon should be leagues ahead of the JVC, but I really can't tell as of yet. If anyone could help that would be awsome. I have examples of my trials and errors from my Youtube videos which you can see I felt I was slowly making progress with the JVC Oppositeofhood - YouTube
Opposite
Then I saw your latest post
Wait, I think I just found it. I pressed record on different settings to take pictures with like portrait to see if it would make a difference and when I uploaded them to my computer I found where it shows the BIt rate and it varied. They run at 23 frames per second 1920 x 1080 MOV video files and all the Bit rates are like 36,356 35,414 ,36,521
If your camera is recording with a variable bitrate, the Bitrate variations from file to file should not be contributing to the issue. But it does raise the issue related to whether or
not we are setting the appropriate bitrate level in the export settings. What are the units for 36,356, 35,414, and 36,517 -
kbps (also can be written Kbps) and is kilobits per second
or
Mbps which is megabits per second.
Let us try this for one of your 1920 x 1080p24 videos.
Go through the following workflow
Manually set project preset...
NTSC
DSLR
1080p
DSLR 1080p24
When you go to export your edited Timeline content, then use
Share
Computer
QuickTime
with Presets = NTSC DV 16:9 - that is going to be customized to 1080p24 (H.264.mov) under the Advanced Button/Video Tab of that preset
The essential settings under the Advanced Button/Video Tab
Video Codec = H.264
Frame Width = 1920
Frame Height = 1080
Frame Rate = 23.976
Field Type = Progressive
Aspect = Square Pixels (1.0)
Now here is where we are going to experiment....
Bitrate
Check Mark next to Limit Data Rate to and type in 36000 before kbps
note the file size of the export as well as the quality of the playback.
Repeat the whole process but in export
Remove the check mark next to Limit Data Rate. The Bitrate field will be disabled.
note the file size of the export as well as the quality of the playback.
We will be watching for your results.
Thanks.
ATR -
What are the settings for datasource and infopackage for flat file loading
hI
Im trying to load the data from flat file to DSO . can anyone tel me what are the settings for datasource and infopackage for flat file loading .
pls let me know
regards
kumarLoading of transaction data in BI 7.0:step by step guide on how to load data from a flatfile into the BI 7 system
Uploading of Transaction data
Log on to your SAP
Transaction code RSA1LEAD YOU TO MODELLING
1. Creation of Info Objects
In left panel select info object
Create info area
Create info object catalog ( characteristics & Key figures ) by right clicking the created info area
Create new characteristics and key figures under respective catalogs according to the project requirement
Create required info objects and Activate.
2. Creation of Data Source
In the left panel select data sources
Create application component(AC)
Right click AC and create datasource
Specify data source name, source system, and data type ( Transaction data )
In general tab give short, medium, and long description.
In extraction tab specify file path, header rows to be ignored, data format(csv) and data separator( , )
In proposal tab load example data and verify it.
In field tab you can you can give the technical name of info objects in the template and you not have to map during the transformation the server will automatically map accordingly. If you are not mapping in this field tab you have to manually map during the transformation in Info providers.
Activate data source and read preview data under preview tab.
Create info package by right clicking data source and in schedule tab click star to load data to PSA.( make sure to close the flat file during loading )
3. Creation of data targets
In left panel select info provider
Select created info area and right click to create ODS( Data store object ) or Cube.
Specify name fro the ODS or cube and click create
From the template window select the required characteristics and key figures and drag and drop it into the DATA FIELD and KEY FIELDS
Click Activate.
Right click on ODS or Cube and select create transformation.
In source of transformation , select object type( data source) and specify its name and source system Note: Source system will be a temporary folder or package into which data is getting stored
Activate created transformation
Create Data transfer process (DTP) by right clicking the master data attributes
In extraction tab specify extraction mode ( full)
In update tab specify error handling ( request green)
Activate DTP and in execute tab click execute button to load data in data targets.
4. Monitor
Right Click data targets and select manage and in contents tab select contents to view the loaded data. There are two tables in ODS new table and active table to load data from new table to active table you have to activate after selecting the loaded data . Alternatively monitor icon can be used.
Loading of master data in BI 7.0:
For Uploading of master data in BI 7.0
Log on to your SAP
Transaction code RSA1LEAD YOU TO MODELLING
1. Creation of Info Objects
In left panel select info object
Create info area
Create info object catalog ( characteristics & Key figures ) by right clicking the created info area
Create new characteristics and key figures under respective catalogs according to the project requirement
Create required info objects and Activate.
2. Creation of Data Source
In the left panel select data sources
Create application component(AC)
Right click AC and create datasource
Specify data source name, source system, and data type ( master data attributes, text, hierarchies)
In general tab give short, medium, and long description.
In extraction tab specify file path, header rows to be ignored, data format(csv) and data separator( , )
In proposal tab load example data and verify it.
In field tab you can you can give the technical name of info objects in the template and you not have to map during the transformation the server will automatically map accordingly. If you are not mapping in this field tab you have to manually map during the transformation in Info providers.
Activate data source and read preview data under preview tab.
Create info package by right clicking data source and in schedule tab click star to load data to PSA.( make sure to close the flat file during loading )
3. Creation of data targets
In left panel select info provider
Select created info area and right click to select Insert Characteristics as info provider
Select required info object ( Ex : Employee ID)
Under that info object select attributes
Right click on attributes and select create transformation.
In source of transformation , select object type( data source) and specify its name and source system Note: Source system will be a temporary folder or package into which data is getting stored
Activate created transformation
Create Data transfer process (DTP) by right clicking the master data attributes
In extraction tab specify extraction mode ( full)
In update tab specify error handling ( request green)
Activate DTP and in execute tab click execute button to load data in data targets. -
What is the use for CREATING VIEW WITH CHECK OPTION?
Dear Legends,
I have a doubt
What is the use for creating view?
A: First Data Integrity, Selecting Particular Columns..
What is the use for creating a view with check option?
A: As per oracle manual I read that its a referential integrity check through views.
A: Enforcing constraints at DB level.
A: using CHECK OPTION we can do INSERTS UPDATES for a view for those columns who have no constraints... is it right??
A: If we do a INSERT OR UPDATE for columns who have constraints it will show error... is it right???
Please clear my doubt's Legends
Lots of Thanks....
Regards,
KarthikHi, Karthick,
karthiksingh_dba wrote:
... What is the use for creating view?
A: First Data Integrity, Selecting Particular Columns..Most views are created and used for convenience. A view is a saved query. If the same operations are often done, then it can be very convenient to code those operations once, in a view, and refer to the view rather than explicitly doing those operations.
Sometimes, views are created and used for security reasons. For example, you many want to allow some users to see only certain rows or certain columns of a table.
Views are necessary for INSTEAD OF triggers.
What is the use for creating a view with check option?
A: As per oracle manual I read that its a referential integrity check through views.The reason is integrity, not necessarily referential integrity. The CHECK option applies only when DML is done through the view. It prohibits certain changes. For example, if a user can't see certain rows through a view, the CHECK option keeps the user from creating such rows.
A: Enforcing constraints at DB level.I'm not sure what you mean. Please give an example.
A: using CHECK OPTION we can do INSERTS UPDATES for a view for those columns who have no constraints... is it right??No. Using CHECK OPTION, you can do some inserts and updates, but not others. The columns involved may or may not have constraints in either case.
A: If we do a INSERT OR UPDATE for columns who have constraints it will show error... is it right???If you try to violate a constraint, you'll get an error. That happens in views with or without the CHECK OPTION, and also in tables. -
Why do i keep getting the message 'Cannot connect to iTunes Store' when I have done every connection I can find? What does the error message (-1202) mean when I am on the iTunes site on my computer?
Hi Velvalee,
While there may not be specific information about that error, here is an article of steps for troubleshooting connectivity issues with the iTunes store:
Can't connect to the iTunes Store
http://support.apple.com/kb/ts1368
If that article does not help, there is a link near the bottom for an additional article of advanced troubleshooting.
Cheers!
- Ari -
What is the cause for the mac to become slow
what is the cause for the mac to become slow?
Things You Can Do To Resolve Slow Downs
If your computer seems to be running slower here are some things you can do:
Start with a visit to: OS X Maintenance - MacAttorney.
Boot into Safe Mode then repair your hard drive and permissions:
Repair the Hard Drive and Permissions Pre-Lion/Mountain Lion
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
Repair the Hard Drive - Lion/Mountain Lion
Boot from your Lion Recovery HD. When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported, then click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Restart your computer normally and see if this has helped any. Next do some maintenance:
Suggestions for OS X Maintenance
For situations Disk Utility cannot handle the best third-party utility is Disk Warrior; DW only fixes problems with the disk directory, but most disk problems are caused by directory corruption; Disk Warrior 4.x is now Intel Mac compatible.
OS X performs certain maintenance functions that are scheduled to occur on a daily, weekly, or monthly period. The maintenance scripts run in the early AM only if the computer is turned on 24/7 (no sleep.) If this isn't the case, then an excellent solution is to download and install a shareware utility such as Macaroni, JAW PseudoAnacron, or Anacron that will automate the maintenance activity regardless of whether the computer is turned off or asleep. Dependence upon third-party utilities to run the periodic maintenance scripts was significantly reduced since Tiger. These utilities have limited or no functionality with Snow Leopard or Lion and should not be installed.
OS X automatically defragments files less than 20 MBs in size, so unless you have a disk full of very large files there's little need for defragmenting the hard drive. As for virus protection there are few if any such animals affecting OS X. You can protect the computer easily using the freeware Open Source virus protection software ClamXAV. Personally I would avoid most commercial anti-virus software because of their potential for causing problems. For more about malware see Macintosh Virus Guide.
I would also recommend downloading a utility such as TinkerTool System, OnyX 2.4.3, or Cocktail 5.1.1 that you can use for periodic maintenance such as removing old log files and archives, clearing caches, etc.
For emergency repairs install the freeware utility Applejack. If you cannot start up in OS X, you may be able to start in single-user mode from which you can run Applejack to do a whole set of repair and maintenance routines from the command line. Note that AppleJack 1.5 is required for Leopard. AppleJack 1.6 is compatible with Snow Leopard. There is no confirmation that this version also works with Lion.
When you install any new system software or updates be sure to repair the hard drive and permissions beforehand.
Get an external Firewire drive at least equal in size to the internal hard drive and make (and maintain) a bootable clone/backup. You can make a bootable clone using the Restore option of Disk Utility. You can also make and maintain clones with good backup software. My personal recommendations are (order is not significant):
1. Carbon Copy Cloner
2. Data Backup
3. Deja Vu
4. SuperDuper!
5. SyncTwoFolders
6. Synk Pro
7. Synk Standard
8. Tri-Backup
Visit The XLab FAQs and read the FAQs on maintenance, optimization, virus protection, and backup and restore.
Additional suggestions will be found in Mac maintenance Quick Assist.
Referenced software can be found at CNet Downloads or MacUpdate.
Additional Hints
Be sure you have an adequate amount of RAM installed for the number of applications you run concurrently. Be sure you leave a minimum of 10% of the hard drive's capacity as free space.
Add more RAM. If your computer has less than 2 GBs of RAM and you are using OS X Leopard or later, then you can do with more RAM. Snow Leopard and Lion work much better with 4 GBs of RAM than their system minimums. The more concurrent applications you tend to use the more RAM you should have.
Always maintain at least 15 GBs or 10% of your hard drive's capacity as free space, whichever is greater. OS X is frequently accessing your hard drive, so providing adequate free space will keep things from slowing down.
Check for applications that may be hogging the CPU:
Open Activity Monitor in the Utilities folder. Select All Processes from the Processes dropdown menu. Click twice on the CPU% column header to display in descending order. If you find a process using a large amount of CPU time, then select the process and click on the Quit icon in the toolbar. Click on the Force Quit button to kill the process. See if that helps. Be sure to note the name of the runaway process so you can track down the cause of the problem.
Often this problem occurs because of a corrupted cache or preferences file or an attempt to write to a corrupted log file. -
What is the plan for 64-bit Windows?
The 11G Express Edition Beta installed without warnings or errors on a Windows 7 64-bit virtual machine. However after install, the following error appears multiple times in the alert log:
OER 7451 in Load Indicator : Error Code = OSD-04500: illegal option specified
O/S-Error: (OS 1) Incorrect function. !
This error is repeats every 10 seconds in the alert log.
I understand that this is most likely because of the 64-bit OS. However, it is almost impossible to buy a Windows system today that is not 64-bit. If the plan is to only provide 11G Express Edition Beta in a 32-bit version for Windows, I think it should at least install and run properly in 32-bit mode on current 64-bit Windows operating systems. Or is a 64-bit version for Windows in the works?
Thanks! It is great to see some progress on 11G Express!
Edited by: user468360 on Apr 13, 2011 12:08 PM
I probably obscured my question with the alert log error code. I changed the subject to my real question: What is the plan for 64-bit Windows?
Since almost all windows systems are rapidly moving to 64-bit, will 11G Express be made available in a package (either 32-bit or 64-bit) which installs and runs correctly on a 64-bit windows system? Should we report 64-bit related bugs seen with the 32-bit install package so they can be fixed or is a 64-bit package coming? Thanks!I don't dispute that you can do the install of 11G Express on a 64-bit Windows OS. It even appears to complete successfully. The database opens and you can connect to it.
However I seriously question if the underlying database processes are running correctly. My alert log is filled with hundreds of the errors that I listed in my original post.
If you have posted that you have a successful install on 64-bit Windows, could you please check your alert log and let us know if you are seeing errors, or if everything is running correctly. The alert log is the main error log for the database. You can find it in C:\OracleXE\app\oracle\diag\rdbms\xe\xe\trace\alert_xe.log. Open this file in notepad and check for errors.
Based on the errors that I am seeing, I ask again: What is the plan for 64-bit Windows? Does anyone from Oracle moderate this forum? Is 11G XE supposed to run correctly on 64-bit Windows, or what is the plan for supporting the almost universal move to 64-bit windows operating systems?
Thanks!
Edited by: user468360 on Apr 18, 2011 4:55 PM -
What Speed could i get & what are the errors
Hi Everyone.
I have just joined B.T & yesterday was my last day of the 10 day period.
Bin looking at my speed it hasnt gone up alot but i keep getting all these errors on the hub info so i would like to ask what are the errors please & does the speed look about right for me thanks Nick..
Short time for connection as B.T reset the Hub its a v3.0a
ADSL Line Status
Connection Information
Line state:
Connected
Connection time:
1 days, 06:08:58
Downstream:
4.931 Mbps
Upstream:
1011 Kbps
ADSL Settings
VPI/VCI:
0/38
Type:
PPPoA
Modulation:
G.992.3 Annex A
Latency type:
Interleaved
Noise margin (Down/Up):
5.5 dB / 5.8 dB
Line attenuation (Down/Up):
46.4 dB / 27.7 dB
Output power (Down/Up):
18.5 dBm / 12.6 dBm
FEC Events (Down/Up):
126408871 / 3607
CRC Events (Down/Up):
102820 / 739
Loss of Framing (Local/Remote):
0 / 0
Loss of Signal (Local/Remote):
0 / 0
Loss of Power (Local/Remote):
0 / 0
HEC Events (Down/Up):
91458 / 730
Error Seconds (Local/Remote):
32083 / 501Just enter your down attenuation here- http://www.kitz.co.uk/adsl/max_speed_calc.php there are things you can do to reduce errors like connecting to the master socket see if there is a difference, checking your wiring and housing of the hub etc. A explanation of errors here-http://www.kitz.co.uk/adsl/linestats_errors.htm
Mortgage Advisor 2000-2008
Green Energy Advisor 2008-2010
Charity Health Care Provider Advisor 2010-
I'm alright Jack.... -
What is the LOB_TYPE for XSL-FO Subtemplate?
I ran an installation script to move a new data definition and several templates (one of which is an XSL-FO subtemplate) into our test region and the concurrent program is finishing with a warning and no report is generated. The error in the OPP is "no corresponding LOB data" which from reading posts, appears to be related to the sub-template. This is the code I used to upload an .rtf template (which worked fine).
java oracle.apps.xdo.oa.util.XDOLoader UPLOAD \
-DB_USERNAME apps \
-DB_PASSWORD $P_APPS_PWD \
-JDBC_CONNECTION $JDBC \
-LOB_TYPE TEMPLATE_SOURCE \
-APPS_SHORT_NAME XXFIN \
-LOB_CODE XXFIN_PSBE6_1_TEMPLATE_PDF \
-LANGUAGE en \
-TERRITORY CA \
-XDO_FILE_TYPE RTF \
-NLS_LANG American_America.WE8ISO8859P1 \
-FILE_CONTENT_TYPE 'application/rtf' \
-FILE_NAME $XXFIN_TOP/admin/import/TEMPLATE_SOURCE_XXFIN_XXFIN_PSBE6_1_TEMPLATE_PDF_en_CA.rtf \
-CUSTOM_MODE FORCE \
-LOG_FILE XXFIN_PSB_EXP_ANN_SUM_UP_TMP.log
This is the code I used to upload the XSL file, but no file was uploaded.
java oracle.apps.xdo.oa.util.XDOLoader UPLOAD \
-DB_USERNAME apps \
-DB_PASSWORD $P_APPS_PWD \
-JDBC_CONNECTION $JDBC \
-LOB_TYPE TEMPLATE_SOURCE \
-APPS_SHORT_NAME XXFIN \
-LOB_CODE XXFIN_PSB_NUMBER_FORMAT \
-LANGUAGE en \
-TERRITORY CA \
-XDO_FILE_TYPE XSL-FO \
-NLS_LANG American_America.WE8ISO8859P1 \
-FILE_CONTENT_TYPE 'application/xsl' \
-FILE_NAME $XXFIN_TOP/admin/import/TEMPLATE_XXFIN_XXFIN_PSB_NUMBER_FORMAT_en_CA.xsl \
-CUSTOM_MODE FORCE \
-LOG_FILE XXFIN_PSB_EXP_ANN_SUM_UP_TMP.log
Is there something wrong with the LOB_TYPE, and if so, what is the LOB_TYPE for a .xsl file?
Thanks for your help.
Tam-LOB_TYPE TEMPLATE \
...and...
-FILE_CONTENT_TYPE 'text/xml' \
Maybe you are looking for
-
every time itunes is opened it shuts down b/c an error occurred.... esuninstalled/reinstalled and ran a Reg cleaner... Help the helpless please!!!!!! Error Signature AppName: itunes.exe AppVer: 8.0.2.20 ModName: unknown ModVer: 0.0.0.0 Offset: 0000b7
-
Can you define a specific size of a Drawing Markup rectangle?
Hi all, I am using Acrobat X and have been asked to find an answer to a 'problem' someone is having. If you have a site plan of one's property and they submit it to me for comment (as a pdf file) can I draw a box to a specific size? Say I set the 'sc
-
Please how do I get the Plug in Version? I have only the ActiveX version..11.7.700.169..I need the plugin version..anyone? appreciate
-
Appending to a zero length clob
9.2.0.6 this works: var myClob clob begin :myClob := to_clob(' '); for rec in (select * from delme1) loop dbms_lob.append(:myClob ,to_clob(rec.ename || '\n')); end loop; end; but this does not var myClob clob begin :myClob := to_clob(''); for rec in
-
Hi, If I disable the option to use the special keys, they work as specified... F2 will behave as normal F2 and Fn-F2 will raise brightness. But the revers is not working for me on Mountain Lion .