What is the exact functionality for ASCS and SCS?

I have some simple questions about ASCS and SCS:
1) what is the difference between ASCS and SCS (they are all central instances services). What is the functionality of each?
2) What is the rule to distribute them on a clustered system , e.g.MSCS?
Thanks for your clarification.

1. http://scn.sap.com/docs/DOC-25454
2. I have never done cluster installation
http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a0b86598-35c5-2b10-4bad-890edeb4c8f2
Just now found this discussion post
Re: For new ABAP HA - with ASCS, Central instance still needed?

Similar Messages

  • What is the exact syntax for calling remote function module.

    Hi to all
    1.....what is the exact syntax for calling remote function module.?
    Thanks and regards,
    k.swaminath reddy

    hi
    good
    Lets do simple example where you will first create a RFC in one server (say A) and create normal program in othere server (say B). Finally you will call the RFC in A from B.
    Do the following steps for creating RFC in server A.
    1. log on to server A
    2. go to se37
    3. Edit -> function groups-> create function group and give the function group name (say ZGRP).
    4. create a FM ( say Z_TEST_RFC) in se37 providing the function group which is created just now.
    5. go to attribute tab -> choose remote-enabled module from processing type.
    so that your FM will become RFC.
    6. provide the import parameter in import tab.
    we will provide only two import parameters.
    - parameter name : P_NUM1, typing: TYPE, associated type : I & check the pass value (all the parameters of RFC must pass by value).
    - parameter name : P_NUM2, typing: TYPE, associated type : I & check the pass value
    7. provide the export parameter in export tab.
    parameter name : P_SUM, typing: TYPE, associated type : I & check the pass value
    8. write the given simple code in source code tab.
    FUNCTION Z_TEST_RFC.
    P_TOT = P_NUM1 + P_NUM2.
    ENDFUNCTION.
    Do the following steps for creating ABAP program which will call the RFC in server B.
    1. se38 - > creat a program.
    2. write the given simple code.
    data tot type i.
    call function 'Z_TEST_RFC' destination 'XXXXXX'
    exporting
    p_num1 = 10
    p_num2 = 15
    importing
    p_tot = tot.
    write tot.
    please note that XXXXXX is RFC connection which is avialable in sm59 transaction in server A.
    -go to sm59 - > abap connection (list of RFC connection configurations are avialable). choose server B connection and replace it of XXXXXX in the code.
    finally you can execute the normal abap program that will call the RFC and display the result.
    reward point if helpful.
    thanks
    mrutyun^

  • What is the inbuilt function for ctrl+f11 and f11?

    what is the inbuilt function for ctrl+f11 and f11?

    Forms version?
    If 11g then see the fmrpcweb.res file in %ORACLE_INSTANCE%config\FormsComponent\forms folder.
    If you ask questions with inadequate inputs like this one, you are bound to end up with
    >
    Handle:      shravan
    Status Level:      Newbie
    Registered:      Sep 20, 2011
    Total Posts:      16
    <b>Total Questions:      10 (10 unresolved) </b>
    >
    Cheers,

  • What are the table names for CRM and APO?

    hi friends,
    what are the table names for CRM and APO?
    Regards
    suneel.

    hi Suneel,
    check in crm forum
    Re: SAP-CRM Tables
    BUT051 BP Relationship: Contact Person Relationship
    Similar to BUT050 , additionally contains Contact Person’s Address data
    BUT0BK Business Partner: Bank Data & Details
    BP Number, Bank Key, Bank Country Key, Bank Account Number
    BNKA Bank Master Data
    BUT100 BP: Roles
    ADR2 Telephone Numbers (Business Address Services)
    ADR6 SMTP Numbers (Business Address Services)
    Contains Email – Id of the BP.
    ADRC Addresses (Business Address Services)
    BP’s Complete Address Details- City, Country, Post Code, District, Street, Title No Etc
    TSAD3T Table containing the Title text against a Title No.
    COMM_PRODUCT Master Table for Product
    CRMM_BUAG Master table for Business Agreement
    CRMM_BUAG_H Header Data for Business Agreement such as Tax Category, Tax Characteristic, Form key, Business Agreement Class. Data in this table correspond to ISU CRMD_ORDERADM_H Contains the Header Information for a Business Transaction.
    Note:
    1. It doesn’t store the Business Partner
    responsible for the transaction. To
    get the Partner No, link it with
    CRM_ORDER_INDEX.
    2. This table can be used for search
    based on the Object Id(Business
    Transaction No).
    CRMD_CUSTOMER_H Additional Site Details at the Header Level of a Business Transaction
    CRMC_PROC_TYPE Master table Business Transaction Type
    CRMC_PARTNER_FCT Definition of Partner Functions
    SCPRIOT Priorities for Activities with priority text.
    CRMC_PROC_TYPE_T Text for a transaction type
    CRMC_ACT_OBJ_T Objective Number and Text for Activities
    TJ30T All the status code and text
    CRMC_PR_ASSIGN : Transaction Type and its Transaction Type Object.
    IBIB : Installed Base/Ibase
    IBIN : Installed Base Components
    COMM_PRODUCT : Products
    CRMC_T077D : customer account groups
    CRMD_ORDERADM_H (for header) CRMD_ORDERADM_I (Item data)
    CRMD_ORDERADM_H Business Transactions CRM
    CRMD_ACTIVITY_H Activity
    CRMD_OPPORT_H Opportunity
    BUTOO : Customer details
    BUT001 BP: General data II
    BUT100 BP: Roles
    BUT150 BP relationship: Attribute table (test
    different
    BUT_HIER_TREE Business Partner Group Hierarchy
    CDBC_T_PRODUCTID Mapping: Product Id
    CDBD_ORGMAN Business transaction - organizational unit -
    set
    COMC_PRODUCT General Product Settings
    COMC_R3_FIELDS Assignment of R/3 material master fields to
    CFOP
    COMM_CATEGORY Category
    COMM_CFGMAT Basic Data for Materials
    COMM_HIERARCHY Category Hierarchy
    COMP_TYPES Hierarchy Tool: Comparison Type Check
    Table
    CRMC_CPRICPROC Customer Pricing Procedures
    SMOKVBEZ15 Assignment employees to positions
    CRMMLSGUID: GUID entry (should match GUID in CRMPRLS)
    CRMM_BUT_CUSTNO : Also GUID table (GUID here should match GUID in R/3 table CRMKUNNR)
    SMOFSUBTAB : Mapping & Parameters
    SMOFDSTAT : Download Monitor (R4AM1)
    SMOFFILTAB : Filters (Should match filters in R3AC1 & R/3 Table CRMFILTAB)
    SMOFOBJECT Definition of Objects for Download
    SMOFOBJPAR Parent Objects of an Object in Table
    SMOFPARSFA Middleware Parameter
    SMOFQFIND Queue Finder Table for MW-Queue finder
    SMOFTABLES Definition of Tables for Download

  • What is the exact meaning for Screen Texts, GUI Status & GUI Titles

    What is the exact meaning for Screen Texts, GUI Status & GUI Titles and where we can find in SAP.
    What is called as these : Screen Texts, GUI Status & GUI Titles
    Kindly let me know.
    Akshtiha.

    Hi Akshitha,
    <b>Screen text</b>:They are labels that you can display beside your selection-screen parameters/select-options.. from the ABAP editor, use the menu option Go to> Text Elements>Selection Texts.
    <b>GUI STATUS</b>:go through this link
    http://help.sap.com/saphelp_nw04/helpdata/en/9f/dba99935c111d1829f0000e829fbfe/content.htm
    <b>gui title</b>:The GUI status and GUI title are interface elements of screens. You create both of them using the Menu Painter in the ABAP Workbench. On screens, GUI statuses of type dialog status are used.
    Thanks
    Vikranth Khimavath

  • What is the exact protocol for ejecting Time Machine disk from USB?

    I have an external drive that I connect and use for Time Machine. When I'm done, I eject the drive and Finder disappears. I pull the USB connector and the OS complains that I did not eject the drive properly.
    I've seem the other threads, and I'm afraid I'm going to get a lot of discussion and no answer. So here's a simple question:
    What is the exact protocol for closing Time Machine and disconnecting the USB cable to the drive without getting a complaint from the OS?
    Thanks
    Mike

    Drag the icon to the trash or highlight it and use the eject button or highlight it and use Command+e.

  • I wonder to know what is the enterprise solution for windows and application event log management and analyzer

    Hi
    I wonder to know what is the enterprise solution for windows and application event log management and analyzer.
    I have recently research and find two application that seems to be profession ,1-manageengine eventlog analyzer, 2- Solarwinds LEM(Solarwind Log & Event Manager).
    I Want to know the point of view of Microsoft expert and give me their experience and solutions.
    thanks in advance.

    Consider MS System Center 2012.
    Rgds

  • How to Use the language function for assignment and validation

    Hi All,
    If anyone can explain me in details with example ,how to use the language function for assignments and validations?
    Thanks
    Arnab

    Hi Arnab,
    The expression is checked only for the current MDM session.
    If u login with the ABC language it will always show the ABC language no matter how many times u execute it.
    Try connecting to the DM with the XYZ language.
    It should go to the if part rather than else.
    Hope it helps.
    Thanks,
    Minaz

  • How to find out what are the interfaces used for Job and Job Codes

    HI All,
    I just wanted to know how do we find out what are the interfaces used for Job and Job codes .
    Thanks In Advance
    Sunny

    Hi,
    Here is an idea for your request.
    Basically you can create a simple query on multiprovider 0TCT_MC01.
    Filter: you can use a variable for restriction of time ( calday, or calmonth) since you should be interested for a time period.
    Choose following characters into your objects:
    InfoProvider ( 0TCTIFPROV )  - you can create a variable for choosing infoprovider before query runs.
    *Tp.[Type of BI Application Object] 0TCTBISOTYP  = filter this with 'QUERY' or whatever your need is.
    *BI Application Object 0TCTBISBOBJ,  ( this will give you the name of the queries)
    In key figures choose,  Count for BI Appl. (0TCTWTCOUNT).
    (number for query run)
    Create a condition , for top 20.
    Hope this helps.
    Derya

  • My requirement is to update 3 valuesets daily based on data coming to my staging table. What is the API used for this and how to map any API to our staging table? I am totally new to oracle and apps. Please help. Thanks!

    My requirement is to update 3 valuesets daily based on data coming to my staging table. What is the API used for this and how to map any API to our staging table? I am totally new to oracle and apps. Please help. Thanks!

    Hi,
    You could use FND_FLEX_LOADER_APIS.UP_VALUE_SET_VALUE to upload them from staging table (I suppose you mean value set values...).
    You can find a sample scripts if you google around.
    What do you mean "how to map any API to our staging table" ?
    You should do at least the following mapping (which column(s) in the staging table will provide these information):
    - the 3 value sets name which you're going to update/upload (I suppose these are existing value sets or which have been already created)
    - the value set values and  description
    Try to start with something and if there is any issues the community could then help... but for the time being with the description of the problem you have provided, that's the best I can do...

  • What's the best app for editing and viewing office doc's

    What is the best App for editing and viewing office doc's, that will be compatable with IPhone 5S and Air pad?

    Search the app store, find one that you like and that works for you.

  • What is the default OS for iBook and iBook G4?

    What is the default OS for iBook and iBook G4?

    You can check the specs of ALL iBook models (G3 + G4) at everymac.com
    http://www.everymac.com/systems/apple/ibook/index-ibook.html
    If your iBook has a processor less than 867MHz it won't be able to run
    Mac OS X 10.5 Leopard, though methods exist to allow it unofficially.
    Old first model colors iBook G3 (not white dualUSB) have other limits.
    A reference app for Apple product specifications, download http://mactracker.ca
    Hopefully you can match your questions with the various databases online.
    Good luck & happy computing!

  • What are the optimal values for mac and arp timeout values

    Hi Guys.
    What are the best values for "mac address-table aging-time" and "arp timeout" by following scenarios?:
    - single sg300-10 as layer3-switch with a maximum of 10 local (direct connected) hosts
    - and a 3750x-stack with 100 local hosts + hsrp with a other stack of the same sort
    or for asa 5520 as internet gateway for 500 clients?
    I use at the moment a mac aging-time from 300 seconds and a arp timeout from 3600 seconds.
    Is this o.k.?
    Thanks.

    Marvel.
    As far as enhancing the CLI, it will of course be enhanced when new firmware releases provide new features. As far as making it more IOS-like, best to my knowledge, no.  The only other supported CLI on the SB switches are on the SX500 series and SX200E series which the CLI are all consistent. If you bought a SX500 series the commands are nearly identical minus the different feature sets.
    -Tom
    Please mark answered for helpful posts

  • What are the control functions of Suitability and setup type key in work center?

    Hi all,
    Can any1 plz tell me what is suitability and setup type key in workcenter default values tab?
    what are the functions controlled by these keys?

    Hello,
    Control Key in Defaut value keys screen is mainly for defining how the work center will be used in routings.
    Almost in all the PP we define same Control key to the work center as well in the routing.
    For example in work center control Key PP01 is used to define Routings/Internal proc. activities. When we go to the routing screen even if we do not see our components, work centers or control key we have to manually enter these details ans here control Key will remain the same as it was in Work center.
    No. of individual capacity defines how many machines are there of the same type in the work center. E.g if I have 5 CNC machines then I will make One work center and in capacity screen I will put 5 as No. of individual Capacity.
    Regards,
    Piyush

  • What are the data targets for 0EC_PCA_1 and 0EC_PCA_3?

    Hi,
    I am looking at help.sap.com but not able to find out the data flow from these two datasources.
    0EC_PCA_1 (Profit Center Accounting - transaction data) and 0EC_PCA_3 (Profit Center Accounting - Line Item).
    What are the data targets and further flow for these data sources?
    Thanks,
    Akshara

    Hi,
    Data source  - 0EC_PCA_1 and cube - 0PCA_C01
    Data source - 0EC_PCA_3 and Cube - 0PCA_C01.
    you can use same cube for two data sources.
    Standard multi providers - 0PCA_MP01 and 0PCA_MC01.
    Thanks

Maybe you are looking for