What is the relationship between Change management and Issue tracking?

What is in general change management and what is issue tracking in a SAP point of view?

Hi
See this thread
Re: SAP APO
Additional inputs :
APO refers Advanced planned and optimizer
APO is similar to BW in the sense it is also a OLAP processor intended for reporting needs
Supply chain management
http://help.sap.com/saphelp_nw2004s/helpdata/en/25/79eb3cad744026e10000000a11405a/frameset.htm

Similar Messages

What is the Relationship between Update Rule and Infopackage/Transfer Rules

Hello Experts,
can you help explain these scenarios to me:
What is the relationship between update rules and infopackges?
What is the relationship between transfer rules and infopackges?
What is the relationship between update rules and transfer rules?

Hello,
Info-packages trigger the data load into BW system from the source system. An info-package is created for a specific data source and info source combination.
1) When you trigger the info-package it sends an request to the source system to start the extraction process and this corresponds to the step "Data Request Received" in monitor under details tab. It is the first step.
2) Then the selections specified in the info-package are transferred to the source system to select the requested data from BW system. Then it is sent back to BW system.
3) Once it reach BW, it gets into the PSA and then it gets updated into the data target (depends on what settings are made in IP). No rules (Transfer rules / update rules) comes into picture when data is stored in PSA. Only the transfer structure is used to map the BW info-objects with the source system fields.
4) After data is stored into PSA, the update into the data targets begins. First the transfer rules are applied -> data then flows through the communication structure -> update rules are applied and finally the records gets updated into the data target.
The extraction flow is: -
Source System (DS) -> PSA -> Transfer Rules -> Communication Structure -> Update Rules -> Data target.
Info-package actually triggers the whole data flow in BW system.
Hope it gives you a clear picture.
Thx,
Soumya

What is the relationship between CGI-Executables and cgi-bin?

I am trying to get CGIs working locally on my Mac and am having difficulty understanding the relationship between CGI-Executables/ and cgi-bin/.
I have activated CGI in my httpd.conf file, and have the following perl test script: /Library/WebServer/CGI-Executables/test.cgi file, and have the file permissions set appropriatly
If I call the script from the actual url: http://127.0.0.1/CGI-Executables/test.cgi, it doesn't work. If I use: http://127.0.0.1/cgi-bin/test.cgi, it works fine.
Why cgi-bin and not CGI-Executables? What is the relationship between /Library/WebServer/CGI-Executables/ and cgi-bin?
And how do I get CGIs working in individual users' Sites/ file? Do all CGIs go in the /Library/WebServer/CGI-Executables/ directory, or can each users' Site/ directory have it's own cgi-bin?
Ti Powerbook G4 Mac OS X (10.4.4)

Now I am having trouble getting CGI to work in the user directories. I have a perl script that works for 127.0.0.1/cgi-bin/test.cgi, but not for 127.0.0.1/~joe/cgi-bin/test.cgi.
My apache error log says:
[Tue Feb 14 08:14:23 2006] [error] [client 127.0.0.1] Options ExecCGI is off in this directory: /Users/joe/Sites/cgi-bin/first.cgi
Permissions for Library/WebServer/CGI-Exectuables/test.cgi and /Users/joe/Sites/cgi-bin/ are 777.
I think the problem is somewhere in my directory configs. Apache has so many, it's hard to know what's what.
Here's the first directory directives in httpd.conf:
# First, we configure the "default" to be a very restrictive set of
# permissions.
<Directory />
Options FollowSymLinks
AllowOverride Options
</Directory>
Farther down, there's this, which I added ExecCGI and index.cgi:
# Control access to UserDir directories. The following is an example
# for a site where these directories are restricted to read-only.
<Directory /Users/*/Sites>
AllowOverride FileInfo AuthConfig Limit
Options MultiViews Indexes SymLinksIfOwnerMatch Includes ExecCGI
DirectoryIndex index.html index.cgi
<Limit GET POST OPTIONS PROPFIND>
Order allow,deny
Allow from all
</Limit>
<LimitExcept GET POST OPTIONS PROPFIND>
Order deny,allow
Deny from all
</LimitExcept>
</Directory>
Then down at the bottom of the file is something I suspect was added automatically when the user account was created:
Include /private/etc/httpd/users/*.conf
<Directory "/Users/joe/Sites/">
Options Indexes MultiViews Includes
AllowOverride None
Order allow,deny
Allow from all
</Directory>
To further confuse things, there is another file /etc/httpd/user/joe.conf that has additional user-directory directives:
<Directory "/Users/joe/Sites/">
Options Indexes MultiViews
AllowOverride None
Order allow,deny
Allow from all
</Directory>
Is there something in all these directory configurations that is preventing the user from accessing cgi-bin? Can I add directives to an .htaccess file in the user directory.
Ti Powerbook G4 Mac OS X (10.4.4)

What is the relationship between OPOR, OPDN and OIGE Table ?

Dear Experts,
We want to develop one report as per project wise Item Consumtion.
We want data from Purchase Order, Goods Receipt PO and Issue for Production.
The purpose of this report is to find out that what item should create PO
and based on that PO what the GRN should be taken
and based on that GRN this particular item should used for that project
which mentioned in GRN at the time of Item selection.
We develop an Query for that but this query are not as per standard process to get data.
select
OPOR.CardCode as VendorCode, OPOR.CardName as VendorName,
POR1.ItemCode as POItemCode, POR1.Dscription as POItemDesc,
OPOR.DocNum as PONo, OPOR.DocDate as PODate, OPOR.DocDueDate as PODueDate,
POR1.Project, POR1.OpenQty as PendingQty, POR1.Quantity as POQty,
PDN1.Quantity as GRNQty, IGE1.Quantity as IssueQty,
((POR1.PriceBefDi-(POR1.PriceBefDi*POR1.DiscPrcnt/100))*POR1.Quantity) as 'POPrice'
from OPOR
inner join POR1 on
POR1.DocEntry=OPOR.DocEntry
LEFT JOIN PDN1 ON
POR1.DocEntry= PDN1.BaseEntry AND
POR1.LineNum=PDN1.BaseLine
Inner JOIN OPDN ON
PDN1.DocEntry = OPDN.DocEntry
Left join IGE1 on
IGE1.ItemCode=PDN1.ItemCode and
IGE1.Project=PDN1.Project
WHERE
POR1.Project='{?Project}'
Can anybody tell me that how i can create standard query as per SAP Standards.
Thanks & Regards,
Nishit Makadia

Hi,
Try this query for production order issued serial number.
SELECT T0.[DocNum] as Prod#, T0.[CardCode] as CustCode,T0.[OriginNum] as SO#,T0.[Project] as JobNo, T0.[ItemCode], T1.[ItemCode], T1.[IssuedQty], T3.[IntrSerial],T0.[Comments] as Remark
FROM OWOR T0 INNER JOIN WOR1 T1 ON T0.DocEntry = T1.DocEntry left join SRI1 T2 on T2.[BsDocEntry] = t0.docentry and T1.[LineNum] = T2.[BsDocLine] inner join OSRI T3 ON T2.SysSerial = T3.SysSerial and t3.itemcode = t2.itemcode
WHERE T2.[BsDocType] = '202' and T0.[Project] = [%0] and T2.[BaseType] = '60' and T0.[Status] IN ('r','l')
GROUP BY T0.[DocNum], T0.[ItemCode], T1.[ItemCode], T1.[IssuedQty], T3.[IntrSerial],T0.[Project],T0.[CardCode],T0.[OriginNum],T0.[Comments] order by T0.[DocNum]
Thanks & Regards,
Nagarajan

What is the relationship between BASIS and XI?

what is the relationship between BASIS and XI?
whether we have to acquire knowlege to explore BASIS for XI

HI Gabriel
BASIS is the administration of SAP system, BASIS team will be responsible for installation, maintenance, transport, authorizations in the SAP system.Taking care of the Server in all the situation,applying Support Packages, patches,fixes, Monotioring the Jobs.Participate in requirements gathering, assessment, design, configuration and testing activities for SAP security and other issues
XI is also a middleware.
The work of XI Basis starts from installation of XI server and it inculdes many system related things such as Installing Adapter framework, Maintaining RFC connections, Roles and Authorization, Updating Patches etc....
Check this link on Management of XI and go through it completely. You will ahve clear idea about the role performed by XI Administrator or XI Basis:
http://help.sap.com/saphelp_nw04/helpdata/en/a3/c6d931767dbb4d8a2696b9c72431a9/content.htm
Also refer this thread on XI Basis work:
Basis activites for XI
Cheers..
Vasu
<b>** Reward Points if found useful **</b>

Re: What is the relationship between the JTA Server Timeout and

Two things. The transaction timeout is set when the transaction starts. When are you setting the timeout, and where are you starting the transaction?
          There is a bug in 6.0 SP1. The EJB subsystem always sets the transaction timeout. If you don't specify anything in your descriptor. It sets the timeout to 30 seconds. However, if you
          change the JTA default to 60 seconds, the EJB container won't see this change. This is fixed in our next minor release.
          -- Rob
          Tom Gerber wrote:
          > What is the relationship between the JTA Server Timeout and an EJB's <transcation-timeout-seconds> parameter?
          >
          > Does the EJB's timeout have to be >= the servers to take effect?
          >
          > We tried setting the timeout in the XML file to 60 seconds but the transaction still timed out after 30 seconds or so which makes me believe the server timeout overrides the EJB's timeout.
          >
          > Is this correct behavior?
          >
          > We are on WL 6.0 sp1
          >
          > Thanks
          >
          > Tom


Sorry, you cannot query for known bugs yet.
          Work is in progress :)
          Kumar
          Tom Gerber wrote:
          > Is there a place on the WebSupport site for WebLogic that I can query
          > for know issues for WL 6 sp1?
          >
          > I tried the Find Solutions but didn't find much.
          >
          > Thanks
          >
          > Rob Woollen wrote:
          >
          > > Two things. The transaction timeout is set when the transaction starts. When are you setting the timeout, and where are you starting the transaction?
          > >
          > > There is a bug in 6.0 SP1. The EJB subsystem always sets the transaction timeout. If you don't specify anything in your descriptor. It sets the timeout to 30 seconds. However, if you
          > > change the JTA default to 60 seconds, the EJB container won't see this change. This is fixed in our next minor release.
          > >
          > > -- Rob
          > >
          > > Tom Gerber wrote:
          > >
          > >> What is the relationship between the JTA Server Timeout and an EJB's <transcation-timeout-seconds> parameter?
          > >>
          > >> Does the EJB's timeout have to be >= the servers to take effect?
          > >>
          > >> We tried setting the timeout in the XML file to 60 seconds but the transaction still timed out after 30 seconds or so which makes me believe the server timeout overrides the EJB's timeout.
          > >>
          > >> Is this correct behavior?
          > >>
          > >> We are on WL 6.0 sp1
          > >>
          > >> Thanks
          > >>
          > >> Tom
          > >

What is the difference between Session timeout and Short Session timeout Under Excel Service Application -- session management?

Under Excel Service Application --> session management; what is the difference between Session timeout and Short Session timeout?

Any call made from the API will automatically be set to the “Session Timeout” period, no matter
what. Calls made from EWA (Excel Web Access) will get the “Short Session Timeout” period assigned to it initially.
Short Session Timeout and Session Timeout in Excel Services
Short Session Timeout and Session Timeout in Excel Services - Part 2
Sessions and session time-outs in Excel Services
above links are from old version but still applies to all.
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

What is the relationship between the SAP BC and XI?

Hi Friends,
What is the relationship between the SAP BC and XI?
Regards
Sam

Hi Samuel Melvin ,
The SAP BC is basically WebMethod's product supplied free of charge to SAP customers.
SAP XI is a purchased product from SAP that can be used to integrate multiple systems, you would need to contact your SAP Account rep to discuss licensing issues. You cannot download it for free from sapnet.
It is probably more relevant to discuss the comparison between these solutions based on a specific scenario, but here are some basic differences. Obviously, the foremost one being that the SAP Exchange Infrastructure (XI) belongs to the SAP Netweaver technology suite, whereas Business Connector although bundled by SAP is really a Integration tool provided by Web Methods.
Being a Netweaver solution the SAP XI is central in design and configuration. The SAP XI is really integrated as a required solution for some of new mySAP solutions like SRM. For example, the mySAP SRM business scenario for Supplier Self Services in EBP requires the implementation of SAP XI, the Business connector cannot be utilized to replace this scenario. Although the SAP Business Connector can still be utilized with SRM for all XML based communication. Both mySAP SRM and XI runs natively on the SAP WebAS Server.
The Business Connector is a point to point solution that provides messaging and routing. Currently a number of organizations using the Business Connector utilize it to communicate between its partners using XML based messaging. This can be achieved using SAP XI as well, but SAP's strategy is to utilize XI as a central hub for messaging, routing, and communication between all SAP, non-SAP systems as well as partners. As SAP XI is a relatively new solution, organizations that are looking for communicating with their partners to exchange XML based documents or other point-to-point scenarios can still utilize SAP Business connector.
Initially, when SAP announced the SAP XI, there was a notion that SAP Business Connector would be phased out and SAP XI would be the solution utilized hereon. But SAP will continue to support the Business Connector, the SAP Exchange Infrastructure will remain as the SAP's strategic integration solution. All new and or updated SAP solutions will make use of the XI for all process-centric, message based integration. As upgrades are scheduled and new solutions deployed we'll see the mandated need for XI but currently the only solution that natively requires SAP XI is mySAP SRM 2.0.
It will be interesting to see how organizations that already utilize SAP Business Connector warm up the SAP XI idea. But for the most part they will not have a choice really, as the new mySAP products are going to natively require the use of SAP XI for all process-centric integration between the different SAP solutions. But there is no reason why organizations cannot continue to utilize the SAP Business Connector for all point-to-point solutions already deployed with possibly document exchange and partner integration. Hope this helps.
These web-sites may help u in understanding XI & BC
Understanding SAP XI SEEBURGER
http://www.seeburger.com/fileadmin/com/pdf/SAP_Exchange_Infrastructure_Integratio_Strategy.pdf
http://www.t2b.ch/Flyers/t2b%20SAP%20Xi%20Flyer.pdf
SAP Exchange Infrastructure (BC-XI)
http://help.sap.com/saphelp_srm30/helpdata/en/0f/80243b4a66ae0ce10000000a11402f/content.htm
webMethods for SAP
http://www1.webmethods.com/PDF/webMethods_for_SAP-wp.pdf
http://help.sap.com/saphelp_srm30/helpdata/en/72/0fe1385bed2815e10000000a114084/content.htm
cheers!
gyanaraj
****Reward points if u find this helpful

What's the relationship between Flex and AIR?

What's the relationship between Flex and AIR?
I only know that Flex is a Framework and the AIR is a runtime,
Can any one tell me more about these two object in detail,thanks a lot!

AIR is a runtime that supports a superset of the Flash Player API. You use it to run mobile and desktop applications, as opposed to browser apps.
Flex is a set of technologies for building either AIR apps or browser apps. It includes a framework of runtime classes (e.g, Button, DataGrid, etc.) to use in your applications, an SDK with a command-line compiler, and an IDE called Flash Builder (formerly Flex Builder) that supports intelligent editing, a design view, and a debugger.
So, a brief statement of their relationship is that you can use Flex to build AIR apps.
Gordon Smith
Adobe Flex SDK Team

What is the difference between personnel development and performance management

Hi,
What is the difference between personnel development and performance management in terms of configuration and in portal level .
Thanks
Srikant

HI Srikant,
Personnel development is PD module where u can configure the qualification catalog with the proficiency which can be attached to the position or job as a requirement and the same can be attached to the person as a qualification and then you can do the profile matchup and find any qualification deficit and can propose any trraining required to impart the qualification.And also you can do succession planing, career planing and also development plan.
Performance management is an appraisal cycle in a company . All appraisal process between manager and the employee will be taken care via portal with the appraisal template.(form)
hope this will help you.
regards,
DInesh

What is the relationship between Acrobat Pro, Acrobat Reader, and the Acrobat Reader Plugin for Firefox?

Mozilla's plugin scanner identifies an old version of the Reader plugin on my machine. The download indicates a massive 55 MB size, and implies that Reader itself will be installed on my machine. HOWEVER, I don't want Reader installed! I use Acrobat Pro and I have noticed some problematic interactions over the years.
What is the relationship between Acrobat Pro, Reader, and the Firefox Plugin?

You can also check out the comparison at http://www.adobe.com/products/acrobat/matrix.html.

What's the difference between transport route and transport layer

what's the difference between transport route and transport layer,Can somebody give me some explaination? thks in advance!

Hi,
Transport Layer in ABAP Workbench
    The Change and Transport System supports the distribution of development
    work on large projects across multiple SAP Systems.
    The packages in each development system are grouped into one transport
    layer.
    The transport layer determines whether objects are assigned to a local
    or transportable change request.
Use
    Each of your SAP development systems is assigned a transport layer as
    its standard transport layer. If you use Extended Transport Control, you
    can assign different standard transport layers to certain clients.
    You can define at the most one consolidation target for each SAP System
and transport layer.
When you create a package, it is assigned the standard transport layer
of the SAP System.
If you want to assign a different transport layer to a package, you
require the administration authorization for the Change and Transport
System.
The objects in a package automatically have the transport attributes
defined for the corresponding transport layer.
o   If a consolidation route originating in their SAP System is defined,
     then the objects are assigned to a transportable request, and
     transported into the consolidation target when it is released.
o   If a consolidation route is not defined, the objects are assigned to
     a local request, and are not transported.
Customizing settings are not assigned to a package. They have the
transport attributes of the standard transport layer of the system or
client.
It is best to assign a package a standard transport layer for which a
consolidation route originating in the development system is defined.
To display and maintain the transport layers and routes, use the
Transport Management System (transaction STMS).
Only the system adminstrator can make changes.
Caution:
     The tables TSYST, DEVL, TWSYS, TASYS are no longer productive as of
     Release 4.0A and cannot be maintained.
Regards
Ben

What's the relationship between OS-X / Win 7 partitions? Effect of cloning?

Hi,
Been trying to understand this. What's the relationship between the mac extended partition and the NTFS partition once the two OS's (SL and Win 7) are successfully installed? Do major changes to one impact the other? Is there an "umbilical cord" so to speak, or are they two stand-alone independent partitions?
I want to use two dives as described below. Will it work?
My set up:
DRIVE 1 (internal SATA):
-Partition A (mac extended) = Snow Leopard (My Main Mac OS)
-Partition B (BC ntfs) = winClone backup of Part. D
DRIVE 2 (internal SATA):
-Partition C (mac extended) = CCC backup of Part. A
-Partition D (BC ntfs) = Windows 7 (My Main Windows OS)
Both drives were set up with clean installs of OS-X using proper bootcamp partitioning and formatting procedures. I essentially duplicated the whole install process 2x.
I work 40+ hrs a week on Windows for work. And also do extensive media development on the Mac. So I don't want one drive doing all the work.
HERE'S THE $12 QUESTION.....
Is it safe to clone my Main mac os (part. A) onto partition C, without messing up my Main Win 7 partition (D)? And visa versa... can I winClone part. D on to part. B without messing up part. A ??
Hope this makes sense. Thanks!

are they two stand-alone independent partitions?
Yes.
Is it safe to clone my Main mac os (part. A) onto partition C, without messing up my Main Win 7 partition (D)? And visa versa... can I winClone part. D on to part. B without messing up part. A ?
Yes.
(51211)

What is the difference between full checkpoint and incremental checkpoint?

What is the difference between full checkpoint and incremental checkpoint?
And what is checkpoint queue?
Can someone clarify these concepts?
Thanks!

Hi,
there are different types of checkpoints:
- Full checkpoint:
=> DBWR writes all dirty buffers from the Buffer cache to the datafiles and CKPT retrieves a new Checkpoint Change Number from a sys owned sequence and writes this number to all file headers and the controlfile.
-- can be triggered by different events, like a logswitch, a manual checkpoint (alter system ..), a shutdown and so on
This is the setup point for SMON for a crash recovery.
- Partial checkpoint:
=> DBWR writes all dirty buffers of a singel tablespace from the Buffer cache to the datafiles and CKPT retrieves a new Checkpoint Change Number from a sys owned sequence and writes this number to all file headers and the controlfile.
-- can e triggered by an ALTER TABLESPACE OFFLINE, ALTER TABLESPACE READ ONLY, ALTER TABLESPACE BEGIN BACKUP statement.
Incremental checkpoint:
number to all file headers and the controlfile.
-- can be triggered by different events, like a logswitch, a manual checkpoint (alter system ..), a shutdown and so on
- Partial checkpoint:
=> DBWR writes all dirty buffers of a single tablespace from the Buffer cache to the datafiles and CKPT retrieves a new Checkpoint Change Number from a sys owned sequence and writes this number to all file headers and the controlfile.
-- frequency is determined by FAST_START_MTTR_TARGET parameter (new feature to Oracle 9i), with wich you can specify a time in seconds which SMON is allowed to take maximal for a Crash Recovery until the database must be open again.
Dapending on the system you have SMON must calculate the maximum number of Redolog-blocks which it can manage to recover in the specified number of seconds. It will then create so called incremental checkpoints which will be tracked in the so called checkpoint queue in memory.
FAST_START_MTTR_TARGET is auto-tuned in Oracle 10g and Oracle tries to manage (incremental) checkpoint in a fashion that a minimum of I/Os are caused and a minimum time for crash recovery is needed.
If you set LOG_CHECKPOINTS_TO_ALERT to TRUE you will find checkpoint information in the alertSID.log file. You will see FULL and INCREMENTAL checkpoints then.
Hope this clarifies your question,
Lutz Hartmann

What are the difference between 4.6c and 4.7 versions?

what are the difference between 4.6c and 4.7 versions?
if any please give me answer
regards
ramanji

Hi,
Upgrade SAP or Installation of SAP R/3 and ECC
What is ECC? Where to find the installation steps of ECC 5/6.0 with SQL as database and on windows platform with the steps including Solution Manager installation?
http://service.sap.com/instguides
ECC means Enterprise Central Component.
There are all the relevant installation guides. You NEED SAPNet access because without a registered and licensed SolMan installation number you will not be able to generate the SolMan key for the ECC installation.
Upgrade to 4.7
Have you gone through an upgrade to 4.7?
What are the difference or changes associated with 4.7.
If you are currently on 4.6C and are inching forward to upgrading to 4.7 then this information might be useful to you.
There is very little difference between 4.6 and 4.7, the only "steps" you should need are steps in SU25 ( skip step 1) Then go through all your role and perform a merge old new to bring in the new authorization objects
Just to forewarn you of a potential problem which have been encounter at the point of writing.
After updating/ modifying roles in step 2C, when going back into 2C to make sure all roles are now green, 70% have gone back to red!
The maintenance done is ok, but there seems to be a problem while trying to go back into the roles again to re-generate.
SAP recognizes them as needing "adjustment", so you cannot pick them up in mass generate in PFCG as they do not come in, even though the authorizations tab is red.
This problem is currently with SAP and it is confirmed that nothing have been done wrongly.
Generally, the work is quite manageable in the upgrade, but don't be surprised at how big the upgrade is when compared to upgrading from 46b to 46c.
If we have full software of 46c and 47E is it possible to upgrade 46c to 47E or there is a seperate 47E upgrade software need to be requested from SAP?
Where I can get the document with upgrade steps on the service market place?
It is of course possible and supported:
http://service.sap.com/inguides
--> SAP Components
--> SAP R/3 Enterprise
--> (choose your version)
at the bottom there is an "Upgrade guide" for Windows and Unix.
For Upgrades it is recommended to read ALL the notes mentioned in the
upgrade guide and to make sure one is using
- the correct version of the "tp" program
- the correct version of the "R3trans" program
- the correct version of the "R3up" program
All that is explained in the upgrade guide and in the corresponding notes.
If this is your first upgrade you should take a person, that has some experience on doing that for the first time.
Installation of SAP R/3
Currently we are going to install SAP on a new IBM server from the existing COMPAQ server. Where can I get the steps for that.
Configuration is :
   OS - windows 2003 server
   DB - Oracle 9i
   SAP 4.7
http://service.sap.com/instguides
--> SAP Components
--> SAP R/3 Enterprise
--> SAP R/3 Enterprise Core 4.70 / Ext. Set 2.00 (SR1)
--> Inst. Guide - R/3 Enterprise 4.7 x 2.00 SR1 on Win: Oracle
The above url is the SAP Service Marketplace with all the information you need to install, configure and run system. You need to be a valid licensed customer with a user ID and PASSWORD to use that.
Without access you won't be able to successfully run any SAP systems because it has notes, patches etc.

What is the relationship between Change management and Issue tracking?

Similar Messages

Maybe you are looking for