What is the relationship of javatv api,jmf api and mhp api ?

Whether all these three set of API are required to write digital tv program?

That depends on what the digital TV program (I assume you mean MHP application) wants to do. Specifically;
- javax.tv.xlet.Xlet is needed whatever you want to do.
- Most of the rest of JavaTV is only needed if you want to write an electronic program guide, e.g. to get at service information.
- If you want to write a program which manipulates the video & audio of the TV signal then you need the JMF API and also a small part of javax.tv.service.selection to get hold of the JMF player for the running TV content.
- The MHP APIs do many different things, again depending on what your application wants to do.
- You don't mention them but you also probably need some of the org.havi.ui APIs. In MHP, the top level graphics Container class for applications is an instance of org.havi.ui.HScene. Also the "VK_" constants for some of the remote control codes are only defined in org.havi.ui.HRcEvent.
See http://www.mhp-interactive.org for examples of how to use many of the MHP APIs.

Similar Messages

What is the relationship between Acrobat Pro, Acrobat Reader, and the Acrobat Reader Plugin for Firefox?

Mozilla's plugin scanner identifies an old version of the Reader plugin on my machine. The download indicates a massive 55 MB size, and implies that Reader itself will be installed on my machine. HOWEVER, I don't want Reader installed! I use Acrobat Pro and I have noticed some problematic interactions over the years.
What is the relationship between Acrobat Pro, Reader, and the Firefox Plugin?

You can also check out the comparison at http://www.adobe.com/products/acrobat/matrix.html.

What is the Relationship between CRM On Demand Analytics and OBIEE?

How are these things different? How are they the same?
Thanks

Dear Mohammed,
You can keep creating new threads for this question but I think the answer will be the same.
There does not appear at this time to be an opensource API for Java for H.323. I do not know why this is but it appears to be well so. The open H322 site has a C++ project and the last time you asked this question and again today I did quite a bit of searching and I cannot find ANY Java open source API for this. As I also mentioned the last time there was a JSR for H323 but it was withdrawn. Between this and the number of closed source only (but free) implementations I strongly suspect that there are some licensing or something issues with H.323 technology or implementations that are restricting development of versions at least for Java.
All in all give it up.
I strongly believe at this point your best and perhaps only recourse is to use the IBM engine. It appears free to use. The source is closed but again I see no alternative.
Regards

What is the relationship between CGI-Executables and cgi-bin?

I am trying to get CGIs working locally on my Mac and am having difficulty understanding the relationship between CGI-Executables/ and cgi-bin/.
I have activated CGI in my httpd.conf file, and have the following perl test script: /Library/WebServer/CGI-Executables/test.cgi file, and have the file permissions set appropriatly
If I call the script from the actual url: http://127.0.0.1/CGI-Executables/test.cgi, it doesn't work. If I use: http://127.0.0.1/cgi-bin/test.cgi, it works fine.
Why cgi-bin and not CGI-Executables? What is the relationship between /Library/WebServer/CGI-Executables/ and cgi-bin?
And how do I get CGIs working in individual users' Sites/ file? Do all CGIs go in the /Library/WebServer/CGI-Executables/ directory, or can each users' Site/ directory have it's own cgi-bin?
Ti Powerbook G4 Mac OS X (10.4.4)

Now I am having trouble getting CGI to work in the user directories. I have a perl script that works for 127.0.0.1/cgi-bin/test.cgi, but not for 127.0.0.1/~joe/cgi-bin/test.cgi.
My apache error log says:
[Tue Feb 14 08:14:23 2006] [error] [client 127.0.0.1] Options ExecCGI is off in this directory: /Users/joe/Sites/cgi-bin/first.cgi
Permissions for Library/WebServer/CGI-Exectuables/test.cgi and /Users/joe/Sites/cgi-bin/ are 777.
I think the problem is somewhere in my directory configs. Apache has so many, it's hard to know what's what.
Here's the first directory directives in httpd.conf:
# First, we configure the "default" to be a very restrictive set of
# permissions.
<Directory />
Options FollowSymLinks
AllowOverride Options
</Directory>
Farther down, there's this, which I added ExecCGI and index.cgi:
# Control access to UserDir directories. The following is an example
# for a site where these directories are restricted to read-only.
<Directory /Users/*/Sites>
AllowOverride FileInfo AuthConfig Limit
Options MultiViews Indexes SymLinksIfOwnerMatch Includes ExecCGI
DirectoryIndex index.html index.cgi
<Limit GET POST OPTIONS PROPFIND>
Order allow,deny
Allow from all
</Limit>
<LimitExcept GET POST OPTIONS PROPFIND>
Order deny,allow
Deny from all
</LimitExcept>
</Directory>
Then down at the bottom of the file is something I suspect was added automatically when the user account was created:
Include /private/etc/httpd/users/*.conf
<Directory "/Users/joe/Sites/">
Options Indexes MultiViews Includes
AllowOverride None
Order allow,deny
Allow from all
</Directory>
To further confuse things, there is another file /etc/httpd/user/joe.conf that has additional user-directory directives:
<Directory "/Users/joe/Sites/">
Options Indexes MultiViews
AllowOverride None
Order allow,deny
Allow from all
</Directory>
Is there something in all these directory configurations that is preventing the user from accessing cgi-bin? Can I add directives to an .htaccess file in the user directory.
Ti Powerbook G4 Mac OS X (10.4.4)

What's the relationship between Flex and AIR?

What's the relationship between Flex and AIR?
I only know that Flex is a Framework and the AIR is a runtime,
Can any one tell me more about these two object in detail,thanks a lot!

AIR is a runtime that supports a superset of the Flash Player API. You use it to run mobile and desktop applications, as opposed to browser apps.
Flex is a set of technologies for building either AIR apps or browser apps. It includes a framework of runtime classes (e.g, Button, DataGrid, etc.) to use in your applications, an SDK with a command-line compiler, and an IDE called Flash Builder (formerly Flex Builder) that supports intelligent editing, a design view, and a debugger.
So, a brief statement of their relationship is that you can use Flex to build AIR apps.
Gordon Smith
Adobe Flex SDK Team

What is the relationship between the SAP BC and XI?

Hi Friends,
What is the relationship between the SAP BC and XI?
Regards
Sam

Hi Samuel Melvin ,
The SAP BC is basically WebMethod's product supplied free of charge to SAP customers.
SAP XI is a purchased product from SAP that can be used to integrate multiple systems, you would need to contact your SAP Account rep to discuss licensing issues. You cannot download it for free from sapnet.
It is probably more relevant to discuss the comparison between these solutions based on a specific scenario, but here are some basic differences. Obviously, the foremost one being that the SAP Exchange Infrastructure (XI) belongs to the SAP Netweaver technology suite, whereas Business Connector although bundled by SAP is really a Integration tool provided by Web Methods.
Being a Netweaver solution the SAP XI is central in design and configuration. The SAP XI is really integrated as a required solution for some of new mySAP solutions like SRM. For example, the mySAP SRM business scenario for Supplier Self Services in EBP requires the implementation of SAP XI, the Business connector cannot be utilized to replace this scenario. Although the SAP Business Connector can still be utilized with SRM for all XML based communication. Both mySAP SRM and XI runs natively on the SAP WebAS Server.
The Business Connector is a point to point solution that provides messaging and routing. Currently a number of organizations using the Business Connector utilize it to communicate between its partners using XML based messaging. This can be achieved using SAP XI as well, but SAP's strategy is to utilize XI as a central hub for messaging, routing, and communication between all SAP, non-SAP systems as well as partners. As SAP XI is a relatively new solution, organizations that are looking for communicating with their partners to exchange XML based documents or other point-to-point scenarios can still utilize SAP Business connector.
Initially, when SAP announced the SAP XI, there was a notion that SAP Business Connector would be phased out and SAP XI would be the solution utilized hereon. But SAP will continue to support the Business Connector, the SAP Exchange Infrastructure will remain as the SAP's strategic integration solution. All new and or updated SAP solutions will make use of the XI for all process-centric, message based integration. As upgrades are scheduled and new solutions deployed we'll see the mandated need for XI but currently the only solution that natively requires SAP XI is mySAP SRM 2.0.
It will be interesting to see how organizations that already utilize SAP Business Connector warm up the SAP XI idea. But for the most part they will not have a choice really, as the new mySAP products are going to natively require the use of SAP XI for all process-centric integration between the different SAP solutions. But there is no reason why organizations cannot continue to utilize the SAP Business Connector for all point-to-point solutions already deployed with possibly document exchange and partner integration. Hope this helps.
These web-sites may help u in understanding XI & BC
Understanding SAP XI SEEBURGER
http://www.seeburger.com/fileadmin/com/pdf/SAP_Exchange_Infrastructure_Integratio_Strategy.pdf
http://www.t2b.ch/Flyers/t2b%20SAP%20Xi%20Flyer.pdf
SAP Exchange Infrastructure (BC-XI)
http://help.sap.com/saphelp_srm30/helpdata/en/0f/80243b4a66ae0ce10000000a11402f/content.htm
webMethods for SAP
http://www1.webmethods.com/PDF/webMethods_for_SAP-wp.pdf
http://help.sap.com/saphelp_srm30/helpdata/en/72/0fe1385bed2815e10000000a114084/content.htm
cheers!
gyanaraj
****Reward points if u find this helpful

What is the relationship between them?

What is the relationship between the following concepts ?
Java perssitence entities
Coherence caches
Database tables
Which one can best represents database tables ?

qkc wrote:
What is the relationship between the following concepts ?
Java perssitence entities
Coherence caches
Database tables
Java persistence entities are usually stored in database tables.
Coherence caches may or may not have a relationship with Java persistence entities. If you use a JpaCacheStore then your entities are mapped to cached values with the primary key of the entity serving as a cache key.
Which one can best represents database tables ?Of course database tables can represent database tables the best.
Best regards,
Robert

What is the relationship between BASIS and XI?

what is the relationship between BASIS and XI?
whether we have to acquire knowlege to explore BASIS for XI

HI Gabriel
BASIS is the administration of SAP system, BASIS team will be responsible for installation, maintenance, transport, authorizations in the SAP system.Taking care of the Server in all the situation,applying Support Packages, patches,fixes, Monotioring the Jobs.Participate in requirements gathering, assessment, design, configuration and testing activities for SAP security and other issues
XI is also a middleware.
The work of XI Basis starts from installation of XI server and it inculdes many system related things such as Installing Adapter framework, Maintaining RFC connections, Roles and Authorization, Updating Patches etc....
Check this link on Management of XI and go through it completely. You will ahve clear idea about the role performed by XI Administrator or XI Basis:
http://help.sap.com/saphelp_nw04/helpdata/en/a3/c6d931767dbb4d8a2696b9c72431a9/content.htm
Also refer this thread on XI Basis work:
Basis activites for XI
Cheers..
Vasu
<b>** Reward Points if found useful **</b>

What's the relationship between OS-X / Win 7 partitions? Effect of cloning?

Hi,
Been trying to understand this. What's the relationship between the mac extended partition and the NTFS partition once the two OS's (SL and Win 7) are successfully installed? Do major changes to one impact the other? Is there an "umbilical cord" so to speak, or are they two stand-alone independent partitions?
I want to use two dives as described below. Will it work?
My set up:
DRIVE 1 (internal SATA):
-Partition A (mac extended) = Snow Leopard (My Main Mac OS)
-Partition B (BC ntfs) = winClone backup of Part. D
DRIVE 2 (internal SATA):
-Partition C (mac extended) = CCC backup of Part. A
-Partition D (BC ntfs) = Windows 7 (My Main Windows OS)
Both drives were set up with clean installs of OS-X using proper bootcamp partitioning and formatting procedures. I essentially duplicated the whole install process 2x.
I work 40+ hrs a week on Windows for work. And also do extensive media development on the Mac. So I don't want one drive doing all the work.
HERE'S THE $12 QUESTION.....
Is it safe to clone my Main mac os (part. A) onto partition C, without messing up my Main Win 7 partition (D)? And visa versa... can I winClone part. D on to part. B without messing up part. A ??
Hope this makes sense. Thanks!

are they two stand-alone independent partitions?
Yes.
Is it safe to clone my Main mac os (part. A) onto partition C, without messing up my Main Win 7 partition (D)? And visa versa... can I winClone part. D on to part. B without messing up part. A ?
Yes.
(51211)

What is the Relationship between Update Rule and Infopackage/Transfer Rules

Hello Experts,
can you help explain these scenarios to me:
What is the relationship between update rules and infopackges?
What is the relationship between transfer rules and infopackges?
What is the relationship between update rules and transfer rules?

Hello,
Info-packages trigger the data load into BW system from the source system. An info-package is created for a specific data source and info source combination.
1) When you trigger the info-package it sends an request to the source system to start the extraction process and this corresponds to the step "Data Request Received" in monitor under details tab. It is the first step.
2) Then the selections specified in the info-package are transferred to the source system to select the requested data from BW system. Then it is sent back to BW system.
3) Once it reach BW, it gets into the PSA and then it gets updated into the data target (depends on what settings are made in IP). No rules (Transfer rules / update rules) comes into picture when data is stored in PSA. Only the transfer structure is used to map the BW info-objects with the source system fields.
4) After data is stored into PSA, the update into the data targets begins. First the transfer rules are applied -> data then flows through the communication structure -> update rules are applied and finally the records gets updated into the data target.
The extraction flow is: -
Source System (DS) -> PSA -> Transfer Rules -> Communication Structure -> Update Rules -> Data target.
Info-package actually triggers the whole data flow in BW system.
Hope it gives you a clear picture.
Thx,
Soumya

What is the relationship for infotype 5151 5152 and 5131?

What is the relationship for infotype 5151 5152 and 5131?
How to add/delete support group for a requisition, a talent group, application groups, applications, or agencies?

Okay, you mean I can also assign individual team members to a support team by adding record in infotype 5131; and
The data for a support group is stored in Infotype 5151 and 5152 which will be maintenance by administrator.
How to interpret information using Infotype 5151 and 5152?
Exp,
1. The support group is assign for which requisition,talent group, application group, application, or agency
2. List of member of each support group.
As the only common field which can link both table is ROLE field. Which i think it is not unique enough to get information for above 2 items.
Any comments will be greatly appreciated!

Re: What is the relationship between the JTA Server Timeout and

Two things. The transaction timeout is set when the transaction starts. When are you setting the timeout, and where are you starting the transaction?
          There is a bug in 6.0 SP1. The EJB subsystem always sets the transaction timeout. If you don't specify anything in your descriptor. It sets the timeout to 30 seconds. However, if you
          change the JTA default to 60 seconds, the EJB container won't see this change. This is fixed in our next minor release.
          -- Rob
          Tom Gerber wrote:
          > What is the relationship between the JTA Server Timeout and an EJB's <transcation-timeout-seconds> parameter?
          >
          > Does the EJB's timeout have to be >= the servers to take effect?
          >
          > We tried setting the timeout in the XML file to 60 seconds but the transaction still timed out after 30 seconds or so which makes me believe the server timeout overrides the EJB's timeout.
          >
          > Is this correct behavior?
          >
          > We are on WL 6.0 sp1
          >
          > Thanks
          >
          > Tom


Sorry, you cannot query for known bugs yet.
          Work is in progress :)
          Kumar
          Tom Gerber wrote:
          > Is there a place on the WebSupport site for WebLogic that I can query
          > for know issues for WL 6 sp1?
          >
          > I tried the Find Solutions but didn't find much.
          >
          > Thanks
          >
          > Rob Woollen wrote:
          >
          > > Two things. The transaction timeout is set when the transaction starts. When are you setting the timeout, and where are you starting the transaction?
          > >
          > > There is a bug in 6.0 SP1. The EJB subsystem always sets the transaction timeout. If you don't specify anything in your descriptor. It sets the timeout to 30 seconds. However, if you
          > > change the JTA default to 60 seconds, the EJB container won't see this change. This is fixed in our next minor release.
          > >
          > > -- Rob
          > >
          > > Tom Gerber wrote:
          > >
          > >> What is the relationship between the JTA Server Timeout and an EJB's <transcation-timeout-seconds> parameter?
          > >>
          > >> Does the EJB's timeout have to be >= the servers to take effect?
          > >>
          > >> We tried setting the timeout in the XML file to 60 seconds but the transaction still timed out after 30 seconds or so which makes me believe the server timeout overrides the EJB's timeout.
          > >>
          > >> Is this correct behavior?
          > >>
          > >> We are on WL 6.0 sp1
          > >>
          > >> Thanks
          > >>
          > >> Tom
          > >

What is the different between Sharepoint fast search service and Sql server fulltext search?

HI ,
I want to kow what is the different between Sharepoint fast search service and Sql server fulltext search?
Or Can I abstract the Sharepoint fast search from the Sharepoint platform as a isolate component?
Thank you.
James

They are very, very different beasts.
Firstly FAST Search for SharePoint is the old name for the product and is only relevant for SharePoint 2010 not 2013. It got merged into the standard SharePoint search for the 2013 release.
SharePoint search is aimed at providing a Bing or Google like experience for your intranet content, as well as providing some nifty features that are purely SharePoint releated along the way. That means it can crawl SharePoint content, file shares,
outlook mailboxes, internal and external websites and probably fifty other different things if you really tried. Whilst i'm not an expert on SQL full text search I believe it's intended to provide a search feature for content held within SQL databases
and tables.
Can you run SharePoint purely for Search? Yes, definitely.

What is the difference between SAP NW PI7.1 and PI7.1 EHP1

We have a customer using SAP PI7.1 EHP1. The application to be deployed
isdeveloped on SAP Netweaver PI 7.1 SP06.
We need to know if application developed and transported from PI7.1 is
compatible with EHP1?
Below are the Components used by the application .
1) SSL communication using SOAP adapter
2) Java mapping , Graphical mapping , XSLT mapping
3) Customised EJB modules
4) Adapter framework
5) ALE layer for IDoc communication from ERP to PI
6) RFC lookups to PI system and ERP system.
Questions
1)Will PI EHP1 be able to communicate with PI7.1 using SOAP adapter ?
2) What is the difference between SAP NW PI7.1 and PI7.1 EHP1 ?
Regards,
Sneha

Hi,
EHP Pi7.1 new
IPv6 Support in SAP Systems (new)
Async/Sync and Sync/Async Bridge in the JMS Adapter (New)
High Availability (New) Locate the document in its SAP Library structure
Use
A new concept is available for setting up a high availability environment for SAP NetWeaver Process Integration (PI). To do this, you need SAP Web Dispatcher for load balancing, and you must reconfigure your HTTP, RFC, and RMI connections so that they can be used for load balancing. You must also make various configuration steps in other components of your PI environment.
[Level 4: Document: XML to Text Conversion Module (New)] XML to Text Conversion Module (New)
Message Packaging (New)
Monitoring Milestones (New) Locate the document in its SAP Library structure
Use
You can use the new scenario variant Monitoring Milestones of the Business Process Management scenario to define a monitoring process that can monitor events from different applications. A monitoring process can subscribe to events from SAP or non-SAP systems.
check given Link
http://help.sap.com/saphelp_nwpi711/helpdata/en/61/8c3842bb58f83ae10000000a1550b0/frameset.htm
Regards,
Amit

What is the difference between component(Y, Pb, Pr) and component(R,G,B)?

[I previously posted this question in another thread as hadn't realised how to post new question]
Q. What is the difference between component (Y, Pb, Pr) and component (R,G,B) ?
I’d previously thought I was reasonably savvy on all things HD, but when I turned my thoughts to looking into getting a mac mini to run part of my home cinema I realise I have some confusions around the above.
Here’s what I think I know:-
The mac mini has a DVI output of the type which can output both digital and analogue, and so via physical adapters it could be used to connect to displays that take HDMI or VGA style RGB leads.
I know on the market I can get a DVI to Component cable lead which would therefore lead me to assume it could drive my HD plasma with component input (Y,Pb,Pr), as I currently drive the HD TV via component cable with a SKY HD box (720p and 1080i), an xbox 360 (720p) and a progressive scan DVD player (480p), all through a Denon AV-amp.
The problem is, I’ve heard somewhere that the DVI to component is R,G,B only and that it is not Y, Pb, Pr which is making me wonder it a) this will work and b) if I really understand component video afterall.
I notice the Apple TV outputs Y,Pb,Pr but colours them red, green and blue, so am even more confused….
Hopefully someone can help educate me on this !

Thanks for this.
My Plasma is a Panasonic 42" Viera March 2005 model. No HDMI, No VGA.
It can process signals up to 720p and 1080i via the component (an interestingly it makes a huge difference over SD even though the native panel is 480..!?!)
Am I right in thinking that the iPod component cable will also be R,G,B and therefor might be a suitable trial? Ie. if the TV accepts the input from the iPod then it should work for the mini?
Only other thing of note is I'm doing all this via my Denon 1707 AV amp which does have the facility of upscaling, but I imagine it needs to stick to one format?
Thanks.

What is the relationship of javatv api,jmf api and mhp api ?

Similar Messages

Maybe you are looking for