What is the use of Withholding tax identification number field?

Hello SAP Experts,
I posted this question earlier but had to close because of no replies from anybody. Posting it again to see if I am lucky to get some answer this time.
Can someone tell what is the use of field Withholding Tax Identification Number? Does it help with the reporting? Where does it get populated on the report if given at vendor or master record or within the withholding tax customization for company code? What is the difference between creating it in the customization for withholding tax information for company code and vendor/customer master record?
As per SAP: Withholding tax identification number
This is a number issued by the tax authorities per withholding tax type.
This number must be specified in Customizing either:
(a) As part of the withholding tax information defined for the company code, or
(b) As part of the withholding tax information defined in the customer or vendor master record.

Hi Pete,
The only thing that I could check is the content used in US:
See content of this field for US:
LFA1-STCD1 Social security number
LFA1-STCD2 Employer identification number
LFBW-WT_WTSTCD Withholding tax identification number for WT Type
In order to populate it, please kindly check the following:
The reason why you cannot fill in the field WT_WTSTCD in transaction
Fk02 however you can do it in XK02 (Change vendor centrally) can be due
to wrong customizing of the field status group.
Kindly check the following:
SPRO->
Finantial accounting -> Accounts receivable and accounts payable ->
Define screen layout per activity (vendors) -> Change Vendor(Accounting)
Company code data -> W/holding tax data, w/h tax 2 ->
FIELD Withholding tax code,w/h tax 2 will be probably just available to
display. Please, change it to optional entry.
I hope I could be of assistance.
Kind Regards,
Fernando Evangelista

Similar Messages

What is the use of REUSE_ALV_FIELDCATALOG_MERGE

Hi
in alv's what is the use of REUSE_ALV_FIELDCATALOG_MERGE OTHER THAN ADDING FIELD HEADINGS
Title Edited by: Alvaro Tejada Galindo on Jan 11, 2008 4:20 PM

Hi,
This is the functionality of that FM,
Supports the creation of the field catalog for the ALV function modules
based either on a structure or table defined in the ABAP Data
Dictionary, or a program-internal table.
The program-internal table must either be in a TOP Include or its
Include must be specified explicitly in the interface.
The variant based on a program-internal table should only be used for
rapid prototyping since the following restrictions apply:
o   Performance is affected since the code of the table definition must
    always be read and interpreted at runtime.
o   Dictionary references are only considered if the keywords LIKE or
    INCLUDE STRUCTURE (not TYPE) are used.
If the field catalog contains more than 90 fields, the first 90 fields
are output in the list by default whereas the remaining fields are only
available in the field selection.
If the field catalog is passed with values, they are merged with the
'automatically' found information.
reward points if useful,
seshu.

What is the use of Alternative Calculation Type =2 and 4

Dear Friends
In pricing procedure in gross value, Net value for Item and Net value has Alternative calucation type is 2.
What is the use of it?
Without using it these value line are also fetching net value then what is the work of it. Please give me detail information with its effects in pricing condition tab page in sales document.
Thanking You
Arun

Arun biswal,
Correct Biswal. We have at varoius stages within Pricing procedure the "net value" which is calculated. Not only the alternative calculation type "2" is used if you notice carefully they are stored as subtotals at various levels.
For Ex Gross Value --> Subtotal =1 --> Calc type = 2
similarly for Net value for Item --> Subtotal =2 --> Calc type = 2
Net value 2 --> Subtotal =3 --> Calc type = 2
See, these are used to calculate the net value at various levels in pricing. The calculation Type has got a set of routines that will facilitate us in pricing. SAP has provided certain clauclated formulas or routines to facilitate us during calculation within pricing . Here the "2" is used for calculation without tax and store it as subtotal and display it or use it for further calculations.
We can use this "netvalue" amount for further calculations. It is used for clarity purpose when you issue a statement to customer. (like Confirmation order) at various levels like discount amt involved, Freight involved, Rebate amount invloved.....
Even without this Calc type or using sub total u can proceed....
Finally we have TOTAL --> Subtotal =A --> Calc type = 4
In the above line we have Calc type as 4, which means when you use TAX this calc type is used .
Routines are used to facilitate your process....
Regards
Sathya

Where to customize the company's withholding tax ID in SAP

Hello,
I would like to get the 1099 report for US tax withholding to be displayed with the company tax ID in the header.
When executing transaction for Generic tax withholding reporting, the system can display the company tax ID in the header (it is missing today) and the only way I have found to enter this information is in the extended withholding tax menu (Withholding tax > Extended withholding tax > Company code > Assign withholding tax types to company codes) which I do not want to use, as I am not using any withholding tax types.
Does anyone know if the information can be customized somewhere else?
Best regards,
Ronan

Hi,
Go to OBY6, select your company code.
On next screen, go to "Additional Details" button
and there you can enter the withholding tax ID in the field "TDS No."
Regards<
SDNer

What is the use of valuation class in Finished Material Master?

Dear Expert
What is the use of valuation class in Finished Material Master?
Thanks of Advance

hi,
this is to inform you that,
generally 7920 - will be the valuation class for the finished goods.
Allows the stock values of materials of the same material type to be posted to different G/L accounts & vice versa.
this is an integration field which identifies the G/L accounts & goods movement types.
balajia

What is the use of guid in CRM?

Hi ,
what is the use of guid in crm.
there is nothing like this in r/3.if the data is to flow in from r/3 to crm or crm - r/3 is do we verify the guid.partner guid or product guid.
please make me understand this.
thank you,
hun

GUIDs are system generated unique keys which identifies CRM objects (campaigns, sales documents, business partners, products etc.). CRM & MSA works on GUIDs. Most of the table relationships are defined on GUIDs.
Important CRM tables:
COMM_PRODUCT : Products
CRMC_T077D : customer account groups
CRMD_ORDERADM_H (for header) CRMD_ORDERADM_I (Item data)
CRMD_ORDERADM_H Business Transactions CRM
CRMD_ACTIVITY_H Activity
CRMD_OPPORT_H Opportunity
BUTOO : Customer details
BUT001 BP: General data II
BUT100 BP: Roles
BUT150 BP relationship: Attribute table (test
different
BUT_HIER_TREE Business Partner Group Hierarchy
CDBC_T_PRODUCTID Mapping: Product Id
CDBD_ORGMAN Business transaction - organizational unit -
set
COMC_PRODUCT General Product Settings
COMC_R3_FIELDS Assignment of R/3 material master fields to
CFOP
COMM_CATEGORY Category
COMM_CFGMAT Basic Data for Materials
COMM_HIERARCHY Category Hierarchy
COMP_TYPES Hierarchy Tool: Comparison Type Check
Table
CRMC_CPRICPROC Customer Pricing Procedures
SMOKVBEZ15 Assignment employees to positions
All transactions are uniquely identified by their guids internally
Transaction numbers are not unique
System calls a function module GUID_CREATE to create a unique GUID everytime you create a transaction.
Whenever you are creating some transaction programatically you will have to first create a unique GUID for the transaction by calling GUID_CREATE.
Look at What is GUID in CRM & its significance please? maybe it helps
<b>Please, Reward Points.....</b>

What is the use of this form?

Hi all,
What is the use of this form in include RV61B901?
How does this code send any information to the program calling it? Is Sy-subrc global so that main program will know the reuslts?
Code:
FORM KOBED_901.
DATA : l_anzpk LIKE likp-anzpk.
SELECT SINGLE anzpk FROM likp
                      INTO l_anzpk
                      WHERE vbeln = komkbv2-vbeln.
IF l_anzpk NE 0.
    sy-subrc = 4.
    exit.
ENDIF.
sy-subrc = 0.
ENDFORM.
Thanks,
Charles.

Hello,
This form sets the value of sy-subrc(which is global) based
on the value of l_anzpk.
Regards
Greg Kern

What is the use of additon in up to 1 rows in SELECT statement

Hi All,
         What is the use of up to 1 rows in select statement.
for example
SELECT kostl
      FROM pa0001
      INTO y_lv_kostl UP TO 1 ROWS
      WHERE pernr EQ pernr
      AND endda GE sy-datum.
    ENDSELECT.
I'm unable to get in wat situations we hav to add up to 1 rows
please help me out...
Thanks,
santosh.

Hi,
Use "select up to 1 rows" only if you are sure that all the records returned will have the same value for the field(s) you are interested in. If not, you will be reading only the first record which matches the criteria, but may be the second or the third record has the value you are looking for.
The System test result showed that the variant Single * takes less time than Up to 1 rows as there is an additional level for COUNT STOP KEY for SELECT ENDSELECT UP TO 1 ROWS.
The 'SELECT .... UP TO 1 ROWS' statement is subtly different. The database selects all of the relevant records that are defined by the WHERE clause, applies any aggregate, ordering or grouping functions to them and then returns the first record of the result set.
Regards,
Bhaskar

What is the use of Serializable Interface in java?

Hello friends,
I have one dout and i want to share with u guys:
Why Serializable interface made and actully
what's the use of it?
At which place it become useful ?
It is not contain any method then why it is made?
If anyone have any idea about this then please reply.
Thanks in advace
Regards,
Jitendra Parekh

t is not contain any method then why it is made?To point out to the user of a class (and the programs) that the design of this class is conforming to certain restraints needed for Serialization.

What is the use of Data packet dim with Virtual cube with services

Hi Friends,
Could anybody tell me what is the use of Packet dimension in Virtual cube with services , It cannot contain data persistently ,Just fetch at runtime,Then there is no Physical load happening,Then why it should be automatically created for this??
Message was edited by: Pradeep choudhari

Hi Maik,
Unit dimension will not be created automatically until and unless you have keyfigure referning units..
But my question is : Why should we have data pack dimension , which is useless in this case of Virtual cube with services.It should not be created automatically!! What do you say??

What is the use of HTTPS 8181 port

Hi,
I am wondering what is the use of the port 8181 on the EE5 application server.
the second question. Why the application server open so many port on the same local machine. I agree that for security raison it is a good idea. But does application serveur use tcp connection to communicate between the server thread ?
So it is possible to add a thread in the serveur application to process some internal work. And of course it is possible to include this new thread in the communication process of the server ?
Can we have the map of all the tcp trhead use by the server application.
Regards
Herve Terrolle.

Your app has to run as root to listen on ports up to 1024,
also, some other app (apache?) may already be listening on port 443.
AFAICT port 8181 is just arbitrarily chosen, it might as well have been port 4430, or any other free port above 1024.

What is the use of commit work and rollback work

hao friends,
what is the use of commitwork and rollback work where we can use these open sql statements .
thanks,
anji

hi all
i have written the following code in my development system to change the records of my database.
SELECT * FROM zyikostl INTO TABLE itab.
LOOP AT itab INTO wtab.
    tabix = sy-tabix.
    DO.
      READ TABLE itab INTO ktab WITH KEY kostl_alt = wtab-kostl_neu.
      IF sy-subrc = 0.
        wtab-kostl_neu = ktab-kostl_neu.
        MODIFY itab FROM wtab INDEX tabix.
        CONTINUE.
      ELSE.
        EXIT.
      ENDIF.
    ENDDO.
ENDLOOP.
MODIFY zyikostl FROM TABLE itab.
In the development system i have only few records its working fine,but when it is been moved to test system there are 2500 records in the database so the report is taking much time(more than 5 hours )
i sthere any solution for this ....
thanks,
vaasu.

What is the use of 'ALTER DATABASE CLOSE'?

Hello Everybody,
SQL*Plus: Release 10.1.0.2.0 - Production on Ma Aug 15 21:28:30 2005
Copyright © 1982, 2004, Oracle. All rights reserved.
Connected to:
Oracle Database 10g Enterprise Edition Release 10.1.0.2.0 - Production
With the Partitioning, OLAP and Data Mining options
SQL> conn / as sysdba
Connected.
SQL> startup force
ORACLE instance started.
Total System Global Area 171966464 bytes
Fixed Size 787988 bytes
Variable Size 145750508 bytes
Database Buffers 25165824 bytes
Redo Buffers 262144 bytes
Database mounted.
Database opened.
SQL> select status from v$instance;
STATUS
OPEN
SQL> alter database close;
Database altered.
SQL> select status from v$instance;
STATUS
MOUNTED
SQL> alter database open;
alter database open
ERROR at line 1:
ORA-16196: database has been previously opened and closed
If i have to shutdown the instance and database then
WHAT IS THE USE OF 'ALTER DATABASE CLOSE' ?
I need explanation. Why should i shutdown?
Dont give me this answer.
ORA-16196: database has been previously opened and closed
Cause: The instance has already opened and closed the database, which is allowed only once in its lifetime.
Action: Shut down the instance.

If you read the documentation you will see that there is no ALTER DATABASE CLOSE command.
This is an undocumented Oracle command, which we are not supposed to use. Consequently we are not allowed to complain about the way that it works. Instead we're supposed to use SHUTDOWN IMMEDIATE.
Cheers, APC

What is the use of end routine in bi 7.0

hi friends,
what is the use of end routine in bi 7.0. what scenerio we use end routine.
Thanking u
suneel.

hi Suneel,
check
http://help.sap.com/saphelp_nw70/helpdata/en/e3/732c42be6fde2ce10000000a1550b0/frameset.htm
End Routine
An end routine is a routine with a table in the target structure format as input and output parameters. You can use an end routine to postprocess data after transformation on a package-by-package basis. For example, you can delete records that are not to be updated, or perform data checks.
If the target of the transformation is a DataStore object, key figures are updated by default with the aggregation behavior Overwrite (MOVE). You have to use a dummy rule to override this.
hope this helps.

What is the uses of this programe(accelerometer)?

what is the uses of this programe(accelerometer) in N95 original or N95 8g and from where I can get it?

This is Rotateme, but needs to be signed.
http://www.bysamir.fr/rotateme/
This is the movingball which just needs to be installed (doesn't require signing).
http://research.nokia.com/files/MovingBall_Example.sisx
Nokia N95
V 20.0.015
0546553

What is the use of Withholding tax identification number field?

Similar Messages

Maybe you are looking for