What is this Figure and... it's correct?
2 questions:
1) What is this figure (see under)? I want know what is the box (target_type) in which there is icon that I know. What is its function? How can I find it?
2) It's correct this for expert and excellent Labview programmer (see the Figure): to pass from cluster to merge signal?
Thanks,
Vanny
Sweet, Beautiful and Young Female Physicist (SBYFP)
(I speak a not very good english, so If U are Italian LabVIEW expert speak in Italian, if U speak in Eglish... please speak easy )
My e-mail for personal contact: [email protected]_NO_SPAM_PLEASE
From the Labview help :
data is the data to write to the .tdms file. This input accepts the following data types:
Analog waveform or a 1D array of analog waveforms
Digital waveform
Digital table
Dynamic data
1D or 2D array of:
Signed or unsigned integers
Floating-point numbers
Timestamps
Booleans
Alphanumeric strings that do not contain null characters
So your datatype is not supported. Which data do you want to save. Is it the waveform chart content?
Also a tip then you start a new Labview Session always enable "show context help" in the help menu (short CTRL+h).
F. Schubert is also correct then he says not to use the "fancy" dynamic data wire. The whole Express VI concept is just some flimflam glued ontop of Labview with some cheap glue. Stay away from it and you will become a much better Labview programmer
Message Edited by Coq Rouge on 02-10-2010 12:13 PM
Besides which, my opinion is that Express VIs Carthage must be destroyed deleted
(Sorry no Labview "brag list" so far)
Similar Messages
-
What does this mean and how to correct it
Hi,
we recently upgraded from BW 3.5 to BI 7 and when check the BI logical source for client i get this error
"Source system release 700 is not the same as local information 640 RSAR 671".
what does it mean and how do I correct this error?
thanksHi Vaidya,
Check this OSS note for the same:
Note 931840 - Correction: No check for obsolete release
thanks
Hope this helps.. -
When sending an email from my Ipad. I get "receipient was rejected by server because it does not allow relaying". What does this mean and how do I correct it?
On the email account's settings (Settings > Mail, Contacts, Calendars and tapping on the account on the right), go into it's outgoing SMTP settings and try putting in your email name and password (they might currently show as 'optional')
-
I set up my work e-mail account on my iphone 4S. When I try to send an e-mail message from my phone, an error message occurs "Cannot Send Mail" - "recipient was rejected by the server because it does not allow relaying". What does this mean and how do I correct it?
Get the correct mail server settings from your IT department.
-
I just burned to disc an album of photos I created in Pages but I cannot open the file on the disc because "the format is not valid". What does this mean and how do I correct it ?
There are numerous thread about the same matter in this forum
I hope you'll find your answer
https://discussions.apple.com/search.jspa?resultTypes=&dateRange=all&peopleEnabl ed=true&q=the+format+is+not+valid&containerType=14&container=2084&username=&rank By=relevance&numResults=15 -
After downloading the updates for Premier Elements 12 I got the following error message U44M1P7. What does this mean and how can I correct it. Thanks.
glennpsychdoc
What computer operating system is your Premiere Elements 12 running on? I suspect Mac because of the name your error.
Please read the following Adobe document with the details and fix for error U44M1P7
ATR Premiere Elements Troubleshooting: PE12: 12.1 Update Released
Specifically open the following link in the above
Update 12.1 installation errors | Photoshop Elements, Premiere Elements
Please let us know if that works for you.
Thank you.
ATR -
when attempting launch of photoshopcc,I get a box with "could not load the MMX core routines module because it does not work with this version of PS... what does this mean and how do I correct it?
I did a search on my system and found the Photoshop has a fastcore plug-in. Creative Cloud includes a subscription version of CS6 version 13.1.2. I do not know if you installed that or not. The cc un-install may have done something. You may need to use Adobe Cleaner then Install The Perpetual CS6 version of Photoshop CS6 version 13.0.6 Mac or Photoshop CS6 version 13.0.1.3 PC and not the subscription CS6 extended version 13.1.2. Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6 If you need to download the CS6 installer Download CS6 products.
You may also be able to recover your cs6 using an old system backup
fastcore.8bx on my system... -
I am having trouble setting up my Yahoo! e-mail account on my phone...it asks for my Password and I type it in carefully and correctly, but I get an error window, "MF Message Error Domain error 1032" -what does this mean and how can I get around it? My password is long and convoluted, but it works when I type it in on my main Mac workstation, just fine.....what gives?
try restarting the phone and try again
-
What does this mean and how do I fix it: "The following warnings and errors were found during the validation of the current project: - There appears to be a broken asset in your project. Correct this problem before burning this project."
It means that iDVD has found a problem with one of the movies added to the project. Did you edit the movie after it had been added to the project.
Create a new project and add your assets, movies, slides, etc. again and follow this workflow to help ensure the best quality video DVD:
Once you have the project as you want it save it as a disk image via the File ➙ Save as Disk Image menu option. This will separate the encoding process from the burn process.
To check the encoding mount the disk image and launch DVD Player and play it. If it plays OK with DVD Player the encoding was good.
Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality. Always use top quality media: Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
OT -
This is what I think may have happened. The other day, Thursday Sept 8th, I shut down my pc in the middle of a Firefox upgrade. Now when I try to access Firefox on my pc, I get this error message:
XULRUNNER Error: Platform version '6.0.2 is not compatible with min Version >= 6.0.1 max Version < 6.0.1
What is this about and how can I retsore access to Firefox on my pc?If you use ZoneAlarm Extreme Security then try to disable Virtualization.
Do a clean reinstall and delete the Firefox program folder.
* http://kb.mozillazine.org/Browser_will_not_start_up#XULRunner_error_after_an_update
*[[/questions/869812]]
*[[/questions/869951]] -
My iPod doesn't sync it keeps coming up with the message "The iPod 'iPod Nano' cannot be synced. An unknown error occurred (13019)." What does this mean and how can I fix it?
I am getting the same error message. Have you figured it out?
-
receive error code 2349 when trying to install iTunes. Any idea what that code means and how to correct?
It's a better bet with a 2330, but the first thing I'd try with that is running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Vista instructions in the following document: Check your hard disk for errors
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards? -
Warning: SUID file “System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent” has been modified and will not be repaired. When I repaired "disk permission", this message was what came up. What does this mean, and how can I fix it?
The opperating system I am using is 10.7.4, and updating to the latest version currently. Computer is running fine, except that when I did some utility repairs, I got the warning above, and not really sure what do, in regards to repairing it correctly, not just getting the message off of my computer.
Thank you for your help, and please only contribute if you know about this issue please.That's a status message which can be safely ignored.
(70090) -
What is this message, and how can i fix that problem? when i want to update or restore my cell, this message is coming: (An unknown error occurred (1480))
I am getting the same error message. Have you figured it out?
-
6.6 (1510/1508). It can’t be used on Mac OS X Version 10.8.5 (Build 12F37). what does this mean and how to fix?
kgpmcn wrote:
Crows are birds.
Crows are black.
Therefore black birds are crows.
The build I have is the released build of Mail. I reinstalled it as directed and it didn't help. That indicates that the problem is with my version of OS X.
The build you have is the released build of 10.8.5. You reinstalled it as directed and it didn't help. That indicates it is a problem with your version of Mail.
The above are examples of flawed logic.
Seriously now. Since you obviously don't know what a Combo Update is, I will tell you. A Combo Update is short for a COMBINATION of Updates. That means that there is MORE THAN ONE update in a Combo Update. It is, therefore, quite proper to speak of "one of the Combo Updates". For people whose first language is not English and are not familiar with its subtle nuances, perhaps I should have said "One of the updates contained within the Combo Update was"
"There aren't "versions" of the combo update, unless Apple releases a revision"?
This is plain silly. It means "There aren't versions unless there are"
Also I didn't use the word "version". See above for the explanation of what I DID say.
Are you one of those TROLLS I keep hearing about?
I hope you got a lot of phoney Help points for not actually helping.
Don't bother replying, I won't come back to this thread, so I wont see it. Of course you'll get another phoney Help point, so I suppose you will, but I'll never know. Doesn't that mess with your head?
Bye Bye
What an attitude you have.
Erase your drive and reinstall correctly, stop messing about with incremental patches. The routine you need is BERR (backup, erase, reinstall, restore) or just stay as yu are, it is entirely up to you.
kgpmcn wrote:
Are you one of those TROLLS I keep hearing about?
I hope you got a lot of phoney Help points for not actually helping.
The depth of your ignorance shows here, there are no phoney points, only ones awarded by posters who receive solutions, and only at the original posters choice.
Maybe you are looking for
-
I cant take it anymore. Pleae someone help me. I cannot erase my HD becasue it has all of my pics for my kids and all of my movies school work. I need this fixed please
-
Click on Field in report and Open Form
I know this question relates to Report but I did not receive any reply from report forum that is why I m posting here. I want that when I click on a ABC Field (in runtime report) then it open form.. please help.
-
Effects change bounding box background color
This is a technical continuation of my earlier inquiry - to which I found a workaround but not the solution. Create a document with a black background. Drop a graphic with a transparent background, or a block of white text, on that background. Print.
-
GRC AC Emergency Access Management (EAM) and STAD report data
Dear Community, we use EAM (ID based fire fighting) and the Log synchronization jobs are scheduled every half hour in order to get the fire fighter logs from the back-ends for review by the controller. Due to a technical issue the synchronization job
-
X-Fi notebook, No digital outp
Hi all, I have recently bought the X-Fi notebook soundcard for my new laptop (Dell Vostro 500) and I was hoping to plug the digital output from this card to the Creative Decoder DDTS-00 that I have via the coaxial cable that came with the decoder, wh